sterilization-validation-planner

name	sterilization-validation-planner
description	Sterilization process validation planning skill for EO, radiation, and steam sterilization
allowed-tools	["Read","Write","Glob","Grep","Edit","Bash"]
metadata	{"specialization":"biomedical-engineering","domain":"science","category":"Sterilization and Manufacturing","skill-id":"BME-SK-026"}
graph	{"domains":["domain:biomedical-engineering"],"skillAreas":["skill-area:statistical-analysis","skill-area:data-analysis","skill-area:compliance-automation"],"workflows":["workflow:experiment-design","workflow:peer-review-cycle"],"roles":["role:biomedical-engineer","role:lab-technician"]}

Sterilization Validation Planner Skill

Purpose

The Sterilization Validation Planner Skill supports sterilization process development and validation for medical devices, ensuring sterility assurance levels per ISO standards and FDA guidance.

Capabilities

• Sterilization method selection guidance
• Bioburden determination protocol
• Dose setting (ISO 11137) or half-cycle development
• IQ/OQ/PQ protocol templates
• Sterility test requirements
• Parametric release guidance
• Revalidation scheduling
• Material compatibility assessment
• Biological indicator selection
• Process challenge device design
• Dose audit planning

Usage Guidelines

When to Use

• Selecting sterilization methods
• Planning validation activities
• Developing validation protocols
• Establishing revalidation programs

Prerequisites

• Product materials characterized
• Packaging system defined
• Bioburden data available
• Sterilization facility identified

Best Practices

• Select method based on material compatibility
• Validate worst-case configurations
• Plan for ongoing process monitoring
• Document all parameters thoroughly

Process Integration

This skill integrates with the following processes:

• Sterilization Validation
• Sterile Barrier System Validation
• Design for Manufacturing and Assembly (DFMA)
• Design Control Process Implementation

Dependencies

• ISO 11135 (EO)
• ISO 11137 (radiation)
• ISO 17665 (steam)
• AAMI standards
• Sterilization service providers

Configuration

sterilization-validation-planner:
  methods:
    - ethylene-oxide
    - gamma-radiation
    - e-beam
    - steam
    - dry-heat
  validation-phases:
    - IQ
    - OQ
    - PQ
  sal-targets:
    - 10-3
    - 10-6

Output Artifacts

• Method selection rationale
• Bioburden protocols
• Dose setting reports
• IQ/OQ/PQ protocols
• Validation reports
• Parametric release procedures
• Revalidation schedules
• Monitoring plans

Quality Criteria

• Method appropriate for product
• SAL target achieved
• Validation protocols comprehensive
• Material compatibility verified
• Parametric release justified
• Revalidation program established