convert-ui5-to-fiori-elements

name	convert-ui5-to-fiori-elements
description	Generate a Fiori Elements V4 LROP app (list report + object page) driven by @UI.* annotations on a V4 RAP service, using the Fiori MCP server's 3-step (list_functionalities → get_functionality_details → execute_functionality) workflow. Use when asked to "build a Fiori Elements app", "generate LROP from this V4 service", "convert to annotation-driven UI", or "scaffold Fiori Elements V4".

Convert legacy UI5 JS app ➜ Fiori Elements V4 (annotation-first)

Generate a Fiori Elements V4 list-report + object-page app driven by @UI.* annotations on the RAP CDS projection. Backend annotations are derived from the legacy UI5 app's actual features (columns, search, sort, formatters, action buttons, tab structure) so the FE app reproduces the user-visible contract. Custom behavior FE templates can't express is wired via the extension API.

This skill is one of two parallel UI paths after the RAP backend lands. Pick this one if the target architecture is Fiori Elements V4 (annotation-driven; minimal custom code). Pick modernize-ui5-app.md instead if the target is freestyle TypeScript (custom controllers, manual binding). Both start from the same legacy JS app + the same V4 RAP service.

                  migrate-segw-to-rap.md  (backend: SEGW V2 → RAP V4)
                            │
              ┌─────────────┴─────────────┐
              ▼                           ▼
    modernize-ui5-app.md      convert-ui5-to-fiori-elements.md
        (freestyle TS)               (Fiori Elements V4)

This skill depends on:

• migrate-segw-to-rap.md having produced an active V4 RAP service (CDS roots + projections, BDEF, SRVD, SRVB published, V4 routing group registered in /n/IWFND/MAINT_SERVICE).
• The legacy app (<source_app>/) still being readable — Phase 1 mines its features even though the legacy app itself is not modified.

Independent of modernize-ui5-app.md. This skill does not require the modern TS app to exist. The legacy app is the single source of truth for user-visible features; the FE app reproduces them through annotations + extensions directly.

Domain example. Annotation templates use an illustrative Project → Tasks → TimeEntries domain. Substitute the user's entities throughout — the LLM rewrites every projection / entity / field identifier to match the V4 service.

Canonical annotation reference. This skill points at the ABAP RAP Fiori Feature Showcase (SAP-samples/abap-platform-fiori-feature-showcase) as the authoritative source for @UI.* / @ObjectModel.* / @Common.* annotation patterns. When uncertain about how to express a legacy UI feature as an annotation, search the showcase via mcp__sap-docs__search with the feature's Search Term (e.g. #OPHeaderAction, #LineItemHighlight, #HeaderInfo, #ActionInLineItem). The showcase is the ground-truth catalog every annotation in this skill maps back to.

---

Using mcp__sap-docs__search for annotation discovery (read this first)

This skill names a handful of canonical annotation patterns inline. Treat them as starting points, not the whole catalog. Anything not explicitly covered — alternate visual representations, dynamic feature control, charts, value helps, semantic keys, multi-level OP routing, draft-specific UI behavior, or 7.58-specific syntax issues — look up in mcp__sap-docs__search before guessing. The MCP indexes the authoritative SAP-maintained references, has up-to-date showcase tags, and includes release-specific documentation (758 news, cloud differences, etc.) that this skill text can't keep current with on its own.

Canonical libraries to know

Library ID	What's in it
/abap-fiori-showcase	SAP-samples/abap-platform-fiori-feature-showcase — the on-prem RAP + FE V4 catalog. Every pattern is tagged with a Search Term like #HeaderInfo, #LineItemHighlight, #OPHeaderAction, #OPTable, #DataFieldForAction, #SemanticKey. The 7.58-accurate baseline for this skill.
/cap-fiori-showcase	SAP-samples/fiori-elements-feature-showcase — CAP/CDS V4 counterpart. Same conceptual patterns from the CAP side; useful when the ABAP showcase tag doesn't include the variant you need, especially for FE manifest layout (layouts_ChildEntities*.cds, #Subpages, #InboundNav).
/abap-docs-standard	Official ABAP keyword docs (on-prem). Definitive for syntax (FOR BEHAVIOR OF, virtual elements, projection BDEF rules), release-specific capabilities (ABENNEWS-758-RESTFUL for what's available on 7.58), and the deep theory behind any RAP construct.
/abap-docs-cloud	Same as above for cloud/BTP. Useful when something looks cloud-only — verify before pulling into on-prem 7.58.
/sap-help (online)	SAP Help full content. Best for SAPUI5 manifest configuration, FE template runtime details, Configuring Internal Navigation. Requires includeOnline=true.
/abap-cheat-sheets	Practical RAP / ABAP snippets with current syntax variants.

Search recipe — apply for every annotation question

1. Identify what the user sees: "status as a colored chip", "click row → child detail page", "filter with fixed values".
2. Search the showcase by hashtag — most patterns are tagged literally in markdown:

   mcp__sap-docs__search(query="#TagName")           // exact tag lookup
   mcp__sap-docs__search(query="<visual description>")  // semantic fallback
   

3. Fetch the full pattern of the most relevant hit:

   mcp__sap-docs__fetch(id="/abap-fiori-showcase/<section>#<tag>")
   

4. Adapt to the user's entities — the showcase uses /DMO/FSA_R_RootTP etc.; substitute the user's projection names.
5. If the on-prem pattern is rejected on the target release, search again on a different axis:
   • /abap-docs-standard/ABENCDS_PROJ_VIEW_VIRTUAL_ELEMENT (+ example ABENCDS_PROJ_VIEW_VIRTEL_ABEXA) for virtual elements with ABAP-class calculation
   • /abap-docs-standard/ABENNEWS-<release>-RESTFUL for release-bound capabilities (e.g. ABENNEWS-758-RESTFUL)
   • /cap-fiori-showcase for an alternate CAP phrasing of the same concept
   • DDLX annotate view as a fallback when entity-level annotations are rejected on the DDLS projection (Run 7 evidence: 7.58 routes @UI.facet, @UI.selectionFields, and header FOR_ACTION through DDLX)

Starter tag pointers (non-exhaustive — search for more)

Search-Term references that resolve to a concrete annotation pattern in the showcase. Each is the entry point; fetch the full content to get the canonical syntax for your release.

Need	Starting search terms / docs
Colored status / criticality on a list row	#LineItemHighlight, criticality: 'CriticalityCode', @UI.Criticality
Criticality with calculation logic (not a real column)	/abap-docs-standard/ABENCDS_PROJ_VIEW_VIRTUAL_ELEMENT; example ABENCDS_PROJ_VIEW_VIRTEL_ABEXA. Also @ObjectModel.virtualElementCalculatedBy: 'ABAP:<class>'
Header data point / status indicator	#HeaderFacet, #KeyValue, #DataPointProgress, @UI.dataPoint
Object Page table for a child entity	#OPTable, @UI.lineItem on the child projection, @UI.facet with type: #LINEITEM_REFERENCE, targetElement: '_AssocName'
Drill from one OP to another OP (e.g. Project → Task → TimeEntry)	#OPTable (entry); cap-fiori-showcase/app/listreport-objectpage/layouts_ChildEntities1.cds etc. (sub-page layout); SAPUI5 "Configuring Internal Navigation" (sap-help) for the manifest routing shape
In-page navigation between facets	#InboundNav, targetSections, navigation property on @UI.facet
Action button — OP header	#OPHeaderAction, type: #FOR_ACTION, DataFieldForAction
Action button — LR table toolbar	#ActionInLineItem, #WithAction
Sorting + filter bar	#SelectionFields, #PresentationVariant, @UI.selectionFields
Search across fields	#Search, @Search.searchable, @Search.defaultSearchElement
Semantic key (highlighted/bold in tables)	#SemanticKey, @ObjectModel.semanticKey
Value help / fixed value list	#ValueHelp, @Consumption.valueHelpDefault, @ObjectModel.text.element
Dynamic CRUD (hide/show edit/delete by row state)	#DynamicCRUD, @UI.updateHidden, @UI.deleteHidden, BDEF features: instance
Draft + UI specifics	#DraftHandling, @UI.lineItem editable qualifier, action keyword ( precheck )
Side effects / re-read on action	#SideEffects, @Common.SideEffects
BDEF action signature variants (precheck, factory, copy)	/abap-docs-standard/ABENBDL_ACTION, #OPCopyAction, action ( precheck ) <name>
7.58 capability boundaries	/abap-docs-standard/ABENNEWS-758-RESTFUL + ABENNEWS-758-CDS_BDL

Anti-patterns

• Don't take this skill's example code as gospel. It's a teaching example written at a point in time. The showcase is the ground truth.
• Don't paste a showcase example from a different release without verifying. A #DataFieldForAction example branching off the BTP-Cloud branch may use cloud-only keywords; the on-prem main branch is the safe baseline for 7.58.
• Don't hand-code FE routing/manifest entries without consulting the SAPUI5 internal navigation docs. The shape varies by template + release and is easier to derive from sap-help than to reverse-engineer from a runtime failure.
• Don't accept the first failed-activation symptom as the final answer. Run 7 hit four different blockers in four different layers for one polish item; in every case a follow-up search via mcp__sap-docs__search would have surfaced an alternative before the rollback. The cost of one extra search is 5 seconds; the cost of an unnecessary rollback is 10+ minutes.

Why this is its own skill

Fiori Elements isn't a code transformation — it's a deletion + relocation. Most of the freestyle app is replaced by FE templates that interpret CDS annotations. The skill's three real jobs:

1. Derive the right @UI.* annotations from the legacy app's user-visible features so the FE renders an equivalent UX.
2. Apply those annotations to the RAP CDS projection (the service the SRVB exposes).
3. Generate the FE list-report + object-page project via the SAP Fiori MCP server (@sap-ux/fiori-mcp-server), and wire extensions for anything FE templates can't express.

Smart defaults (apply silently — do NOT ask before research)

Setting	Default	Rationale
Legacy app	<source_app>/	The freestyle JS app — read-only; mined in Phase 1 for the feature inventory. Authoritative source of every user-visible behavior the FE app must reproduce.
Target FE app	<fe_app>/ — default name modern-fe-app/ if user gives no path (mirrors the workspace pattern legacy-ui5-app/ → modern-ui5-app/ → modern-fe-app/)	Fiori MCP generates here; folder must exist and be empty (or empty subfolders)
FE floorplan	List Report + Object Page (LROP V4) when the BO has a clear root + child facets	Maps cleanly to the typical RAP composition root + children. OVP only if the user explicitly asks.
Template	lropv4	Default unless the user asks otherwise
Generator	SAP Fiori MCP server (@sap-ux/fiori-mcp-server) via the list_functionalities → get_functionality_details → execute_functionality sequence	First-party SAP tool; understands FE V4 patterns natively
App namespace	<source_namespace>.fe	Keeps the legacy and FE apps distinguishable (and the modern TS app too, if modernize-ui5-app was also run as the alternate path)
UI5 version	Latest 1.x release (e.g. 1.147.2) unless user specifies	LTS-track; latest FE V4 features available
Language	TypeScript	Modern default; extension files use type-safe APIs
OData V4 service URL	Prefer the SRVD-direct path on the system's HTTPS port: https://<host>:<https-port>/sap/opu/odata4/sap/<srvb>/srvd/sap/<srvb>/0001 (e.g. https://a4h.marianzeis.de:50001/sap/opu/odata4/sap/zui_dm_projects_o4/srvd/sap/zui_dm_projects_o4/0001). Falls back to the Gateway hub path http://<host>:<http-port>/sap/opu/odata4/sap/<srvb>/srvd_a2x/sap/<service>/0001 only when SRVD-direct isn't reachable.	Run 5 + Run 6 verified the SRVD-direct path works without /n/IWFND/MAINT_SERVICE registration on 7.5x systems. The hub path requires the routing-group manual step.
Main entity	Root entity alias exposed by the SRVB (e.g. the alias on define root view entity ... alias <X>)	The LR+OP floorplan is rooted at a single entity
Annotations location	In CDS via SAPWrite update DDLS — not in a local annotation file inside the FE app	The annotations belong to the service; FE app reads them through $metadata. Local annotation files are an antipattern for RAP-bound apps.
Extension language	TypeScript (controller extensions)	Match the rest of the chain
Validation	mcp__SAPUI5_MCP_Server__run_ui5_linter + run_manifest_validation + tsc --noEmit all green	The hard acceptance criteria
Acceptance	FE app runs end-to-end against the V4 service. Browser smoke covers every feature inventoried in Phase 1 — reproduced through annotations or extension hooks.	Concrete deliverable

Input

The user provides:

• Path to the legacy app for feature mining (default: <source_app>/). Read-only.
• Path / name for the FE app (default: <fe_app>/).
• OData V4 service URL — derived from migrate-segw-to-rap's SRVB output. Required.
• Root entity alias (e.g. Project). Default: infer from the SRVB's $metadata.
• App namespace (default: <source_namespace>.fe).
• Transport for the CDS annotation writes (default: same transport used by migrate-segw-to-rap, or auto-create via SAPTransport(action="create")).
• UI5 version (default: latest 1.x).

If only the legacy app path and V4 URL are provided, apply smart defaults and surface the plan in Phase 3 for user ok before any writes.

---

Phase 0 — Preflight

0a. RAP V4 service is live and bindable

SAPManage(action="probe")

Assert rap.available == true.

SAPRead(type="SRVB", name="<V4_SRVB>")

Assert the SRVB exists and is active. If not, stop with "V4 service binding <V4_SRVB> is missing or inactive — run migrate-segw-to-rap.md first."

Bash: curl -s -o /tmp/svc_metadata.xml -w "%{http_code}\n" "<V4_service_URL>/\$metadata?sap-client=<client>"

Assert 200 OK. Try the SRVD-direct path first (HTTPS port + /srvd/sap/<srvb>/0001/).

If 403 with IWBEP/CM_V4_COS/136, the URL is using the Gateway hub path and the routing group isn't registered. Switch to the SRVD-direct URL pattern before stopping — the direct path bypasses the hub registration. Only fall back to "register service group via /n/IWFND/MAINT_SERVICE" if BOTH URL patterns fail.

If 503 with IWBEP/CM_V4_RUNTIME/000 ("service alias cache outdated"), retry once — this is a transient Gateway cache issue. If it persists across retries, treat as 403 and switch URL patterns.

0b. CDS projection is readable + writable

SAPRead(type="DDLS", name="<root_projection>")

Assert active version returns. If not, stop with "Root projection is missing — re-run migrate-segw-to-rap.md Phase 6 Step 3."

0c. Legacy app exists and is readable

Bash: ls <source_app>/webapp/controller/ <source_app>/webapp/view/

Assert both folders are populated. Stop with explicit reason if either is missing — the legacy app is the single source of truth for both the annotation plan (Phase 1+2) and the extension list (Phase 2b).

0d. SAP Fiori MCP server reachable

mcp__fiori-mcp__list_functionalities

If this call fails, the Fiori MCP server isn't configured in this chat. Surface the configuration block and stop:

// .cursor/mcp.json (or equivalent)
{
  "mcpServers": {
    "fiori-mcp": {
      "type": "stdio",
      "timeout": 600,
      "command": "npx",
      "args": ["--yes", "@sap-ux/fiori-mcp-server@latest", "fiori-mcp"]
    }
  }
}

(Source: @sap-ux/fiori-mcp-server README on github.com/SAP/open-ux-tools.)

Optional companion: mcp__SAPUI5_MCP_Server__* for post-generation lint + manifest validation.

0e. Connection Manager (optional)

For scenarios that use a saved BTP / on-prem system connection rather than a direct service URL, the Fiori MCP server depends on the Connection Manager for SAP Systems VS Code extension. For the direct-URL flow this skill uses, the extension is not required — the service URL is passed straight through to execute_functionality.

---

Phase 1 — Inventory the legacy app's user-visible features

This is the heart of the annotation plan. The FE app must reproduce every user-visible behavior of the legacy app. Read every relevant legacy file and produce a feature inventory.

1a. Read the legacy manifest

Read: <source_app>/webapp/manifest.json

Pull: sap.ui5.routing.routes (what URLs the user can reach), sap.ui5.rootView, sap.app.dataSources, i18n. The routes tell you the navigation tree; the data sources tell you what service shape the legacy app expects.

1b. Read every legacy view

Bash: ls <source_app>/webapp/view/
Read: <source_app>/webapp/view/<each>.view.xml

For each view, inventory:

• Page title (from <Page title=...>).
• Header content — buttons, with their conditions (e.g. enabled="{= ${Status} === 'D'}").
• List/table columns — every <Column> with its bound field, sort direction, alignment.
• Search fields — <SearchField> with liveChange + placeholder.
• Sort defaults — sorter clause on list bindings (path + ascending/descending).
• Item structure — ObjectListItem/ColumnListItem/ObjectHeader with their attributes, status fields, formatter calls.
• Tab structure — IconTabBar + IconTabFilter entries (which entities are tabbed, whether each tab has a counter).
• Navigation handlers — press/selectionChange callbacks (rows clickable → navigation).
• Counters, footers — informational widgets (item counts, totals).

1c. Read every legacy controller

Bash: ls <source_app>/webapp/controller/
Read: <source_app>/webapp/controller/<each>.controller.js

For each controller, inventory:

• Action handlers — what does each on<Action> method do? (Call OData function import? Filter? Re-bind? Show MessageBox?)
• Filtering / search logic — what fields, what FilterOperator, what bind path?
• Function-import calls — oModel.callFunction(...) calls and their parameter shapes.
• Custom validation — pre-call checks before function imports / submits.
• Custom navigation — anything that bypasses the manifest router.
• Custom client-side state — JSONModels created for UI-only state (e.g. tab counters fed from non-OData sources).

1d. Read every legacy formatter

Read: <source_app>/webapp/model/formatter.js

For each formatter function, inventory:

• What it formats — status code → text, status code → semantic state (Success/Warning/Error), date → short format, hours → decimal, etc.
• The code→text mapping — capture the exact values (e.g. D → "Draft", A → "Active", C → "Closed").

These map directly to CDS annotation patterns — @Common.Text + @UI.TextArrangement, @UI.Criticality, value-help collections, etc.

1e. Build the feature inventory

Print the structured inventory to the user:

Feature inventory — <source_app>:

ROOT ENTITY (Project):
  Display name (header):    Title
  Description (sub):        ProjectId
  Status (criticality):     Status field — values D=Draft (Warning) / A=Active (Success) / C=Closed (Neutral)
  Sort default:             StartDate descending
  Search (master):          ProjectId, Title (Contains, OR-joined)
  Audit fields:             Erdat (Created), Ernam (Created by), Aedat (Changed), Aenam (Changed by)
  Header button:            Approve — enabled when Status == 'D', calls /ApproveProject(ProjectId)
  Count footer:             "<n> projects" displayed below the list

CHILD ENTITY (Task):
  Tab in detail:            "Tasks"
  Counter:                  from binding length
  Columns:                  TaskId, Title+Description, Status, Priority, DueDate, AssignedTo, EstimatedHours
  Status criticality:       Status: D/IP/D/C (Draft/InProgress/Done/Cancelled) — see formatter
  Priority criticality:     L/M/H (Low/Medium/High) — see formatter
  Click behavior:           Selecting a task populates the TimeEntries tab

CHILD-OF-CHILD ENTITY (TimeEntry):
  Tab in detail:            "Time Entries"
  Counter:                  from selected task's TimeEntries length
  Columns:                  EntryId, TaskId, WorkDate, WorkHours, Description, Username

FORMATTERS:
  statusText:       D → "Draft", A → "Active", C → "Closed"
  statusState:      D → Warning, A → Success, C → Neutral
  taskStatusText:   D → "Draft", IP → "In Progress", DN → "Done", CN → "Cancelled"
  taskStatusState:  same scheme
  priorityText:     L → "Low", M → "Medium", H → "High"
  priorityState:    L → Neutral, M → Warning, H → Error
  dateShort:        custom YYYY-MM-DD
  hoursDecimal:     two decimal places

FUNCTION IMPORT (V2):
  ApproveProject(ProjectId) → translates to RAP action approve_project (already in BDEF)

This inventory is the contract for Phase 2.

---

Phase 2 — Map features to annotations + extensions

Classify each inventory item as one of:

• STANDARD — FE templates render this natively (pagination, row click navigation, search-by-key, basic edit, basic create, basic delete, draft support).
• ANNOTATION — needs a specific @UI.* / @Common.* / @ObjectModel.* annotation on the CDS projection. Most legacy features land here.
• EXTENSION — genuinely custom behavior FE templates can't express; needs a controller extension on the FE app side.

2a. Annotation map — starting points (verify each pattern via sap-docs)

The table below is a quick reference, not a definitive catalog. Apply the search recipe from the "Using mcp__sap-docs__search" section above to confirm the current canonical syntax for your release, especially for anything tagged ⚠ below.

Legacy feature	Starting annotation + showcase tag
Header title = Title	@UI.HeaderInfo.title.value: 'Title' — #HeaderInfo
Header description = ProjectId	@UI.HeaderInfo.description.value: 'ProjectId' — #HeaderInfo
Header type label	@UI.HeaderInfo.typeName: 'Project', typeNamePlural: 'Projects' — #HeaderInfo
List columns (master)	@UI.lineItem: [{ position: N, importance: #HIGH }] per field — #LineItemHighlight for the variant with criticality
⚠ Status code → text + color	Multiple valid patterns; choose by release/draft constraints. Search #LineItemHighlight for the criticality-via-real-column path. For a calculated criticality without a persistent column, see /abap-docs-standard/ABENCDS_PROJ_VIEW_VIRTUAL_ELEMENT + @ObjectModel.virtualElementCalculatedBy: 'ABAP:<class>'. On 7.58 + draft, both have known constraints (Run 7 §1 details). Search before adopting.
Sort default	@UI.presentationVariant.sortOrder: [{ by: '<field>', direction: #DESC }] — #PresentationVariant
Search across fields	@Search.searchable: true at view level + @Search.defaultSearchElement: true per field — #Search
Filter bar	@UI.selectionFields: [...] — #SelectionFields
Audit fields display	@UI.fieldGroup + @UI.facet of #FIELDGROUP_REFERENCE — #HeaderFieldGroup
Approve button (header)	@UI.identification: [{ type: #FOR_ACTION, dataAction: 'approve_project', label: 'Approve', criticality: 3, criticalityRepresentation: #WITH_ICON }] — #OPHeaderAction. The action does NOT auto-render from the BDEF. Projection BDEF must already expose use action approve_project;.
LR toolbar action	Same shape on @UI.lineItem — #ActionInLineItem, #WithAction
OP table for child entity	@UI.facet: [{ type: #LINEITEM_REFERENCE, targetElement: '_AssocName', label: '...' }] on the parent + @UI.lineItem on the child projection — #OPTable
⚠ Multi-level navigation (Project → Task → TimeEntry)	Two valid shapes — research before picking. (a) Nested LineItem facet referencing _Tasks._TimeEntries from the root projection (release-dependent FE support). (b) Separate Task OP route — annotate ZC_DM_TASK with @UI.headerInfo + its own _TimeEntries facet, then add a Task routing target to the FE app's manifest. Search #OPTable, #Subpages, #InboundNav (cap-fiori-showcase); plus SAPUI5 "Configuring Internal Navigation" (sap-help) for manifest routing shape.
Semantic key bolding	@ObjectModel.semanticKey: ['ProjectId'] — #SemanticKey
Dynamic CRUD (hide buttons by row state)	@UI.updateHidden + @UI.deleteHidden bound to a field — #DynamicCRUD

DDLS-vs-DDLX scope on 7.58. Several entity-level annotations (@UI.facet, @UI.selectionFields, header FOR_ACTION via @UI.identification) were rejected on the projection DDLS in Run 7 but succeeded when moved to a DDLX metadata extension (annotate view <ZC_*> with @UI.facet: [...] etc.). If a DDLS entity-level annotation errors with "wrong scope" / "unknown", route it through DDLX. Confirm with the relevant #Tag in /abap-fiori-showcase — the showcase patterns are already split between DDLS and DDLX where the on-prem release requires it.

2b. Extension map (typical)

Legacy feature	Extension hook
Status === 'D' guard on Approve	FE's BDEF action button is enabled per the BDEF's precheck. If the legacy app's enable rule differs from the BDEF, add the precheck on the BDEF (Step 2c) rather than overriding in JS.
Custom validation before Approve (e.g. require Description)	editFlow.onBeforeAction controller extension on the ObjectPage
Custom client-side count footer phrasing	Skipped — FE list-report shows native count
Custom navigation patterns	Almost never needed; FE's row → OP nav is default
MessageBox on approve failure	Native FE error toast already handles this

2c. BDEF-side preparation (run AFTER 2b, BEFORE Phase 4)

If the inventory surfaced a guard like "Approve button only when Status === 'D'", that's a precondition, not a UI concern. Encode it on the BDEF side via the action's precheck clause, then re-activate. (This step belongs in migrate-segw-to-rap.md Step 5 but call it out explicitly here when the legacy guard wasn't already lifted.) Example:

action approve_project precheck result [1] $self;

with a precheck method in the behavior pool that fills %cid / %key and asserts Status == 'D'. Skill defers the actual precheck body to edit_method if needed.

---

Phase 3 — Plan + user approval

Print the plan in this exact format and STOP for ok / edit / question:

Plan — generate FE app at <fe_app>:

Floorplan:           List Report + Object Page (LROP V4)
Namespace:           <source_namespace>.fe
UI5 version:         <user-provided, default latest 1.x>
V4 service:          <V4_service_URL>
Main entity:         <root_alias> (alias on the root projection)
Generator:           SAP Fiori MCP server (@sap-ux/fiori-mcp-server)

Backend annotation writes (via SAPWrite update DDLS on the projection):
  <root_projection>:
    @UI.HeaderInfo, @UI.SelectionFields, @UI.LineItem (root columns),
    @UI.Identification, @UI.PresentationVariant.SortOrder,
    @UI.FieldGroup.Audit, @UI.Facet (Identification + Tasks)
    @Common.Text + virtual <field>Criticality (Status)

  <child_projection_task>:
    @UI.LineItem (Task columns), @UI.HeaderInfo,
    @UI.Facet (Task identification + TimeEntries),
    @Common.Text + virtual fields for Status, Priority

  <child_projection_timeentry>:
    @UI.LineItem (TimeEntry columns), @UI.HeaderInfo

BDEF-side adjustments (via SAPWrite update BDEF / edit_method):
  <list precheck additions, if any>

FE app generation (via Fiori MCP):
  Step 1: list_functionalities      → enumerate supported FE app creations
  Step 2: get_functionality_details → "create FE V4 list-report+OP for external OData service"
  Step 3: execute_functionality     → pass service URL, root entity, namespace, target folder

Extension scaffold (post-generation):
  - <controller-extension list per Phase 2b>

Validation:
  - ui5-linter clean
  - manifest validation clean
  - tsc --noEmit clean
  - browser smoke against every Phase 1 inventory item

Type `ok` to proceed, `edit` to revise, or ask any question.

Wait for ok before mutating anything in the SAP system or generating the FE app.

---

Phase 4 — Write @UI.* annotations to CDS projections (backend preparation)

This is the "prepare the annotations in the backend" step. Do all the CDS writes here BEFORE invoking the Fiori MCP generator — the generator reads the annotated $metadata, so the annotations must be active and the SRVB republished before the generator runs.

4a. Annotate the root projection

SAPRead(type="DDLS", name="<root_projection>")

Splice in the planned annotations. Concrete shape (substitute your entities):

@Metadata.allowExtensions: true

@UI.headerInfo: {
  typeName:       'Project',
  typeNamePlural: 'Projects',
  title:          { value: 'Title' },
  description:    { value: 'ProjectId' }
}
@UI.selectionFields: [ 'ProjectId', 'Title', 'Status' ]
@UI.presentationVariant: [{
  qualifier: 'DefaultSort',
  sortOrder: [{ by: 'StartDate', direction: #DESC }]
}]
@UI.facet: [
  { id: 'GeneralInfo',  purpose: #STANDARD, type: #IDENTIFICATION_REFERENCE, label: 'General' },
  { id: 'AuditInfo',    purpose: #STANDARD, type: #FIELDGROUP_REFERENCE, label: 'Audit',
    targetQualifier: 'Audit' },
  { id: 'Tasks',        purpose: #STANDARD, type: #LINEITEM_REFERENCE, label: 'Tasks',
    targetElement: '_Tasks' }
]
// Header action — renders as an "Approve" button on the OP header (showcase #OPHeaderAction).
// criticality 3 = green (success), 0 = neutral, 1 = red.
@UI.identification: [
  { type: #FOR_ACTION,
    dataAction: 'approve_project',
    label: 'Approve',
    criticality: 3,
    criticalityRepresentation: #WITH_ICON }
]
@Search.searchable: true
define root view entity <root_projection>
  provider contract transactional_query
  as projection on <root_view>
{
  key   @UI.lineItem:       [{ position: 10, importance: #HIGH }]
        @UI.identification: [{ position: 10 }]
        @UI.selectionField: [{ position: 10 }]
        @Search.defaultSearchElement: true
        ProjectId,

        @UI.lineItem:       [{ position: 20, importance: #HIGH }]
        @UI.identification: [{ position: 20 }]
        @UI.selectionField: [{ position: 20 }]
        @Search.defaultSearchElement: true
        Title,

        @UI.lineItem:       [{ position: 30, criticality: 'StatusCriticality' }]
        @UI.identification: [{ position: 30 }]
        @UI.selectionField: [{ position: 30 }]
        Status,

        @UI.lineItem:       [{ position: 40 }]
        @UI.identification: [{ position: 40 }]
        StartDate,

        @UI.lineItem:       [{ position: 50 }]
        @UI.identification: [{ position: 50 }]
        EndDate,

        @UI.identification: [{ position: 60 }]
        Description,

        @UI.fieldGroup: [{ qualifier: 'Audit', position: 10, label: 'Created at' }]
        Erdat,
        @UI.fieldGroup: [{ qualifier: 'Audit', position: 20, label: 'Created by' }]
        Ernam,
        @UI.fieldGroup: [{ qualifier: 'Audit', position: 30, label: 'Changed at' }]
        Aedat,
        @UI.fieldGroup: [{ qualifier: 'Audit', position: 40, label: 'Changed by' }]
        Aenam,

        // virtual criticality field (computed from Status code)
        @ObjectModel.virtualElementCalculatedBy: 'ABAP:<root_class>'  // OR via case-when below
        virtual StatusCriticality : abap.int1,

        /* associations */
        _Tasks
}

For the virtual criticality, simplest cross-7.58-compatible option is a case-when directly in the projection:

case Status
  when 'D' then 2    // Critical (Warning)
  when 'A' then 3    // Positive (Success)
  when 'C' then 0    // Neutral
  else          0
end as StatusCriticality,

Write the spliced source:

SAPWrite(action="update", type="DDLS", name="<root_projection>",
         source="<spliced source>", transport="<transport>")
SAPActivate(type="DDLS", name="<root_projection>")

4b. Annotate every child projection

Repeat the pattern for each <child_projection_X>. Each child gets:

• @UI.headerInfo (title/description)
• @UI.lineItem for every column the legacy view showed
• @UI.facet if the child has further children (e.g. _TimeEntries under Task)
• Virtual criticality fields for any code-with-color field surfaced in the inventory

4c. Publish the SRVB

The SRVB needs republishing for the new annotations to surface in $metadata:

SAPWrite(action="publish_srvb", name="<V4_SRVB>")

4d. Verify annotations land in $metadata

Bash: curl -s "<base>/<V4_service_URL>/$metadata" | grep -oE 'UI\.(LineItem|HeaderInfo|Facets|SelectionFields|PresentationVariant|FieldGroup|Identification)' | sort -u

Expected output: every annotation kind you wrote shows up in the listing. If empty, the SRVB didn't pick up the changes — re-run publish_srvb. If only some show, the projection wasn't re-activated cleanly — SAPDiagnose(action="object_state", type="DDLS", name="<root_projection>") to inspect.

---

Phase 5 — Generate the FE app via the SAP Fiori MCP server

This is the "use Fiori MCP to create the app" step. The Fiori MCP server exposes a three-tool dance — list_functionalities → get_functionality_details → execute_functionality. Each step narrows scope. Do not skip steps even if you think you know the params.

References:

• SAP/open-ux-tools — fiori-mcp-server README
• npm: @sap-ux/fiori-mcp-server
• SAP Community: First Release of the SAP Fiori MCP Server

The Fiori MCP server is experimental at the time of this skill's writing. Tool signatures may change. If list_functionalities returns a different shape than expected, follow the live response — the README above is the source of truth.

5a. Discover what the server can do

mcp__fiori-mcp__list_functionalities

Inspect the response for a functionality that matches "create a new Fiori elements application for an external OData V4 service". The exact name in the response depends on the server version — look for keywords like create, fiori-elements, list-report, lropv4, external-service.

If the server doesn't have a matching functionality:

• It might require a CAP project. In that case, generate via the legacy fallback (@sap/generator-fiori CLI — see 5d) and document the gap as a Run capture for next iteration.
• Or the user's Fiori MCP version is older than expected. Re-check by running:

  Bash: npx --yes @sap-ux/fiori-mcp-server@latest --version
  

  and instructing the user to update the MCP config to pin the latest.

5b. Get parameter requirements for the chosen functionality

mcp__fiori-mcp__get_functionality_details(name="<the-functionality-name-from-5a>")

The response lists required + optional parameters. For the LROP-for-external-service flow, typical required parameters include:

• serviceUrl — <V4_service_URL> (the $metadata-backed endpoint from Phase 0a)
• mainEntity or entitySet — the root entity alias from the SRVB (e.g. Project)
• targetPath — <fe_app>/ (the folder to generate into)
• namespace — <source_namespace>.fe
• appId / appName — the application identifier
• ui5Version — user-provided (default: latest 1.x)
• language — typescript

Map the user-supplied inputs onto the required parameters. If a required parameter has no mapping, stop and ask the user. Do not invent values.

5c. Execute the generator

mcp__fiori-mcp__execute_functionality(
  name="<the-functionality-name-from-5a>",
  parameters={
    serviceUrl: "<V4_service_URL>",
    mainEntity: "<root_alias>",
    targetPath: "<fe_app>",
    namespace:  "<source_namespace>.fe",
    appName:    "<short-app-id>",
    ui5Version: "<ui5-version>",
    language:   "typescript"
  }
)

Wait for the generator to finish. Verify the structure:

Bash: ls <fe_app>/webapp/ && cat <fe_app>/webapp/manifest.json | head -40

Expected:

• webapp/Component.ts
• webapp/manifest.json with sap.ui.generic.app / sap.fe.templates config
• webapp/i18n/i18n.properties
• webapp/ext/ (extension folder — may be empty)
• package.json / ui5.yaml / tsconfig.json

5d. Fallback if the MCP server can't do it

If list_functionalities doesn't expose an external-service path, fall back to the @sap/generator-fiori CLI:

Bash: cd <workspace> && npx --yes @sap/generator-fiori --no-deploy

Walk through the prompts (or pass --skip-install with explicit args). This is the same generator the MCP server wraps — slower because it's interactive, but always works.

5e. Known Fiori MCP rough edges (track upstream)

The Fiori MCP server is experimental. Two known issues to recognize and work around:

• fetch-service-metadata returns an MCP framework error instead of a structured response when the @sap-ux/store has no entry for the target system. Workaround: curl $metadata yourself to a local file (e.g. <fe_app>/metadata.xml), then point execute_functionality at the file. Tracked upstream: SAP/open-ux-tools#4652 — when this closes, the curl workaround can be dropped.
• fetch-service-metadata requires Connection Manager configuration for stored system entries; direct URL passthrough to execute_functionality bypasses this. Skill's Phase 0e already documents the direct-URL path.

Capture any new rough edges in RUN-NOTES.md so the next iteration can either work around them or file follow-up upstream issues.

---

Phase 6 — Configure extensions for the EXTENSION list from Phase 2b

For each row in the Phase 2b extension map, scaffold a TS controller extension. FE V4 extensions come in two flavors:

• Controller extensions — extend the LR or OP controller via the editFlow / routing / appComponent API.
• Extension points — slot custom XML/Fragment into a specific spot (header, footer, before/after a section).

For the talk demo's typical extension (a precheck on approve that the BDEF doesn't already encode):

Write: <fe_app>/webapp/ext/ObjectPageExt.ts

import ControllerExtension from "sap/ui/core/mvc/ControllerExtension";
import MessageBox from "sap/m/MessageBox";

/**
 * @namespace <source_namespace>.fe.ext
 */
export default class ObjectPageExt extends ControllerExtension {
  public static overrides = {
    editFlow: {
      onBeforeAction: async function (
        this: ObjectPageExt,
        mParameters: { actionName: string; context: any }
      ) {
        if (!mParameters.actionName.endsWith(".approve_project")) return;
        const description = mParameters.context.getProperty("Description");
        if (!description) {
          MessageBox.error("Cannot approve a project without a description.");
          throw new Error("Approval blocked by extension");
        }
      }
    }
  };
}

Register the extension in <fe_app>/webapp/manifest.json:

"sap.ui5": {
  "extends": {
    "extensions": {
      "sap.ui.controllerExtensions": {
        "sap.fe.templates.ObjectPage.ObjectPageController": {
          "controllerName": "<source_namespace>.fe.ext.ObjectPageExt"
        }
      }
    }
  }
}

Run the linter after each extension scaffold:

mcp__SAPUI5_MCP_Server__run_ui5_linter(files=["<fe_app>/webapp/ext/ObjectPageExt.ts"])

Repeat for every entry in the extension map. Keep extensions small — one concern per class.

If a feature classification is ambiguous (annotation? extension?), use the Fiori MCP's docs search to resolve:

mcp__fiori-mcp__search_docs(query="custom validation before action Fiori elements V4")

This pulls the authoritative SAP guidance and prevents speculation.

---

Phase 7 — Validation + smoke test

7a. Static checks

mcp__SAPUI5_MCP_Server__run_ui5_linter
mcp__SAPUI5_MCP_Server__run_manifest_validation
Bash: cd <fe_app> && npx tsc --noEmit

All three must return clean.

7b. Dev server

Restart the dev server on a free port (default 8082 — pick a different port if the legacy app's dev server or another running tool already uses it):

Bash: cd <fe_app> && pkill -f "ui5 serve" ; (npm start -- --port 8082 &)

Wait ~5 seconds for the server to come up. Probe the entry point:

Bash: curl -s -o /dev/null -w "%{http_code}\n" http://localhost:8082/index.html

7c. Browser smoke against the Phase 1 inventory

Open http://localhost:8082 in a browser and validate every Phase 1 inventory item. The acceptance criterion is: the FE app reproduces every user-visible feature of the legacy app, either through annotations or extensions.

Reference checklist (adapt to the user's inventory):

1. List-report renders with the columns from @UI.LineItem in the right order.
2. Filter bar shows the fields from @UI.SelectionFields.
3. Search works on the fields marked @Search.defaultSearchElement.
4. Default sort matches @UI.PresentationVariant.SortOrder.
5. Row click opens the OP.
6. OP header shows the right title/description from @UI.HeaderInfo.
7. Status field in the row has the right color (criticality).
8. Tabs/facets render each @UI.Facet-referenced association.
9. Nested facets drill into grandchild entities (e.g. TimeEntries under Tasks).
10. Action button renders for the BDEF action (from @UI.identification DataFieldForAction); clicking executes via the framework's standard CSRF/etag flow — no extension required for the round-trip.
11. Extension hook fires for the cases inventoried in Phase 2b (validation, custom prompts).
12. Audit fields show in the Audit facet on the OP.
13. Native FE count in the list-report header matches the legacy footer phrasing (allowing for "X projects" vs "Showing X of Y" UX differences).

7c.1 — Draft V4 reality (verified in Run 6)

The V4 service exposes IsActiveEntity as part of every entity key under a draft scenario. Two consequences for testing:

• Keyed reads must include IsActiveEntity: Project(ProjectId='PRJ-0001',IsActiveEntity=true) returns 200; the legacy-style Project('PRJ-0001') returns 400.
• Action invocation requires the full CSRF dance: GET <service-root>/?sap-client=<n> with X-CSRF-Token: Fetch first → POST the action URL with the returned X-CSRF-Token, session cookie, and If-Match: <etag>. Skipping If-Match returns 428 (CX_OD_PRECOND_REQUIRED).

These are normal for any V4 + draft service; FE templates handle them automatically at runtime. The notes here are for manual curl smokes only.

If any step fails:

• For an annotation issue, return to Phase 4 and adjust the CDS, re-activate, publish_srvb, rerun the smoke step.
• For an extension issue, debug the controller extension in browser DevTools.
• For an FE rendering issue that looks like a tool bug, run mcp__fiori-mcp__search_docs(query="<exact symptom>") to find the authoritative reference.

7d. Final report

Fiori Elements conversion complete — <fe_app>

Floorplan:        LROP V4 (TS)
UI5:              <version>
V4 service:       <V4_service_URL>
Annotations:      <n> @UI.* annotations written across <m> projections
Extensions:       <n> controller extensions
Linter:           clean
Manifest:         clean
TypeCheck:        clean
Browser smoke:    <12+/12+> inventory items reproduced

What just happened (3 sentences):
  - Mined the legacy app's user-visible feature set (columns, sort, search, actions,
    tab structure, formatters).
  - Wrote the equivalent @UI.* / @Common.* / @Search.* annotations onto the RAP CDS
    projections via ARC-1.
  - Generated the FE app on top of the now-annotated $metadata via the SAP Fiori MCP
    server, with extension hooks for the few cases FE templates can't express natively.

ARC-1 calls used:
  - SAPManage(action=probe)
  - SAPRead(type=DDLS, name=<root_projection>)
  - SAPRead(type=SRVB, name=<V4_SRVB>)
  - SAPWrite(action=update, type=DDLS, ...) × <m> projections
  - SAPActivate(type=DDLS, ...)
  - SAPWrite(action=publish_srvb, name=<V4_SRVB>)
  - (Optional) SAPWrite(action=update, type=BDEF, ...) + SAPActivate for BDEF precheck

Fiori MCP calls used:
  - mcp__fiori-mcp__list_functionalities
  - mcp__fiori-mcp__get_functionality_details(name=<chosen>)
  - mcp__fiori-mcp__execute_functionality(...)
  - mcp__fiori-mcp__search_docs(...) × <n> (during extension scaffolding)

UI5 MCP calls used:
  - mcp__SAPUI5_MCP_Server__run_ui5_linter × <n>
  - mcp__SAPUI5_MCP_Server__run_manifest_validation

---

Error handling — known modes

Symptom	Cause	Fix
$metadata reflects no annotations after SAPWrite update DDLS	DDLS reactivated but SRVB wasn't republished	SAPWrite(action="publish_srvb", name="<V4_SRVB>")
mcp__fiori-mcp__list_functionalities returns empty / fails	Server not registered, or npx cache stale	Verify .cursor/mcp.json; in a fresh shell, npx --yes @sap-ux/fiori-mcp-server@latest fiori-mcp should print server-ready logs
Generator fails with "service unreachable"	The <V4_service_URL> is gated by 403 because of the V4 routing group	Surface the /n/IWFND/MAINT_SERVICE manual step from migrate-segw-to-rap.md Phase 6
Generator succeeds but FE app shows a blank shell	mainEntity passed without annotated CDS	Re-check Phase 4 — every entity in the @UI.Facet chain needs at least @UI.LineItem and (for OP root) @UI.HeaderInfo
List-report shows no columns	@UI.LineItem annotation is on the root view, not the projection	Move annotations to the projection; FE reads them from the SRVB-exposed projection
Action button not visible	Action wasn't exposed on the projection BDEF, or projection BDEF missing use action approve_project	Check projection BDEF (define behavior for <root_projection> { ... use action approve_project; }) and re-publish
Filter bar empty	@UI.SelectionFields annotation missing or pointing at field that's not marked @Search.searchable at view level	Add @Search.searchable: true at the view level and @Search.defaultSearchElement: true on the right fields
Status field uncolored	No criticality binding	Add the criticality: '<field>Criticality' reference on the @UI.LineItem entry, AND a virtual <field>Criticality projection field that maps the code to FE criticality (0=Neutral, 1=Negative, 2=Critical, 3=Positive)
Nested facet (TimeEntries under Tasks) doesn't render	Some 7.5x releases don't honor _Tasks._TimeEntries LineItem facet paths	Render TimeEntries as a separate OP if you must — drill from the Task LineItem; verify on user's release
Controller extension throws "Override target not found"	Wrong controller path in manifest	LR: sap.fe.templates.ListReport.ListReportController; OP: sap.fe.templates.ObjectPage.ObjectPageController
MCP server timed out	Long-running execute_functionality blocked by slow $metadata fetch	Increase the MCP timeout in .cursor/mcp.json (currently 600s); the default is usually enough for the talk-demo's service size
Generator hangs on a confirmation prompt	The MCP server tried to interactively confirm an overwrite	Pre-delete <fe_app>/ before re-running, or pass overwrite: true if the functionality details list it

---

What this skill explicitly does NOT cover

• Multi-floorplan composition (Overview Page + LRO + ALP). Single LRO+OP is the talk demo's scope. Composition is a follow-up.
• Heavy custom rendering that genuinely can't fit into FE building blocks. If the user needs that, they should pick the freestyle path (modernize-ui5-app.md) instead.
• Mock/local-service mode. The skill targets the live V4 RAP service. The Fiori MCP can generate apps for CAP projects, but that's a different flow.
• Authorization policy. FE renders what the service authorizes. PFCG / S_DEVELOP changes happen on the SAP side, not in this skill.
• Translation/localization beyond what the CDS @EndUserText.label provides. FE picks labels from the service metadata; additional i18n lives in the FE app's i18n files.
• CAP-side generation. This skill assumes a RAP backend; for CAP-only flows use the Fiori MCP server's CAP-targeted prompts directly.

---

Notes for the LLM running this skill

• The annotation-first discipline is the whole point. Never let the FE generator run against an un-annotated $metadata — the result is a useless shell.
• The Fiori MCP server is experimental. Tool names and parameter shapes may have shifted since this skill was written. Always start with list_functionalities and adapt.
• Annotations belong on the projection, not the root view. The SRVB exposes the projection; FE reads from there.
• Republish the SRVB after every CDS change that affects exposed annotations. ADT does not do this automatically.
• The "facets reference associations" pattern is the trickiest part: a facet of type #LINEITEM_REFERENCE with targetElement: '_Tasks' only works if _Tasks is an exposed association on the projection. Check the projection's use association _Tasks { ... } block.
• Controller extensions are the escape hatch — when in doubt about whether something needs one, ask the user. The FE template can express more than people expect; only escalate when truly necessary.
• Reach for mcp__fiori-mcp__search_docs (or mcp__sap-docs__search with topic="fiori-elements") before guessing annotation syntax. SAP's annotation reference is the authoritative source.
• If mcp__fiori-mcp__list_functionalities returns capabilities you didn't expect (e.g. "add page to existing app", "modify manifest"), surface them in the plan — they may simplify Phase 6 extension work.
• Do not edit manifest.json by hand to add pages or change routing if the Fiori MCP can do it via execute_functionality. The MCP's edits are schema-aware and survive re-generation; hand edits can be overwritten.

Sources

• SAP/open-ux-tools — fiori-mcp-server README
• npm: @sap-ux/fiori-mcp-server
• SAP Community: First Release of the SAP Fiori MCP Server
• SAP-samples/ui5con-2026-fiori-mcp-server (hands-on exercises)
• SAP-samples/fiori-mcp-server-hands-on
• sapdev.eu: Using Fiori MCP Server in VSCode with Cline or GitHub Copilot