تشغيل أي مهارة في Manus بنقرة واحدة

swpilotcli-sweep-ic-by-dimension

النجوم٢٣

التفرعات٢

آخر تحديث٣٠ أبريل ٢٠٢٦ في ٠٣:٤٦

Sweep the validated driving dimension in the active SolidWorks sketch and print the computed IC coordinates for each step. Uses the current Yeti 6-bar point tracking method validated in this session. Use when you need the IC path as coordinates before plotting points.

التثبيت

التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.

تشغيل في Manus

المصدر

arthurle3210

arthurle3210/SwpilotCLI

فتح مستودع GitHub عرض مستودعات المنشئ

تنزيل

تشغيل في Manus

المهن ذات الصلةSOC

استنادا إلى تصنيف SOC المهني

رسامو الهندسة الميكانيكيةمهن الهندسة المعمارية والهندسة·SOC 17-3013

مستكشف الملفات

4 ملفات

SKILL.md

readonly

name	swpilotcli-sweep-ic-by-dimension
description	Sweep the validated driving dimension in the active SolidWorks sketch and print the computed IC coordinates for each step. Uses the current Yeti 6-bar point tracking method validated in this session. Use when you need the IC path as coordinates before plotting points.

swpilotcli-sweep-ic-by-dimension

Compute IC coordinates across a dimension sweep and print them to the console.

Quick start

dotnet run --project ./sup_tools/swpilotcli-sweep-ic-by-dimension/scripts/SweepIcByDimension/SweepIcByDimension.csproj

المزيد من هذا المستودع

نفس المستودع

swpilotcli-active-doc-info

arthurle3210/SwpilotCLI

Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.

2026-04-3023

swpilotcli-eye-screenshot

arthurle3210/SwpilotCLI

YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.

2026-04-3023

swpilotcli-actiongroup-replace-notes

arthurle3210/SwpilotCLI

"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.

2026-04-3023

swpilotcli-batch-xt-to-step

arthurle3210/SwpilotCLI

Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.

2026-04-3023

swpilotcli-check-dangling-dims

arthurle3210/SwpilotCLI

Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

2026-04-3023

swpilotcli-close-doc

arthurle3210/SwpilotCLI

Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.

2026-04-3023