firewall-config

name	firewall-config
description	Configure iptables, nftables, and cloud firewalls. Implement network segmentation and traffic filtering. Use when securing network perimeters or implementing security zones.
license	MIT
metadata	{"author":"devops-skills","version":"1.0"}

Firewall Configuration

Configure host-based and cloud firewalls for network security.

When to Use This Skill

Use this skill when:

• Setting up a new server and need to restrict network access
• Implementing network segmentation between application tiers
• Configuring cloud security groups for AWS, GCP, or Azure resources
• Migrating from iptables to nftables
• Auditing existing firewall rules for compliance
• Responding to a security incident requiring emergency network blocks

Prerequisites

• Root or sudo access on Linux hosts
• AWS CLI configured for cloud security groups
• Understanding of TCP/IP, ports, and protocols
• Network diagram showing required traffic flows

iptables

Basic Setup with Default Deny

# Flush existing rules
iptables -F
iptables -X
iptables -t nat -F
iptables -t mangle -F

# Default policies - deny all inbound, allow outbound
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT ACCEPT

# Allow established connections
iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

# Allow loopback
iptables -A INPUT -i lo -j ACCEPT

# Drop invalid packets
iptables -A INPUT -m conntrack --ctstate INVALID -j DROP

# Allow SSH (restrict to management subnet)
iptables -A INPUT -p tcp --dport 22 -s 10.0.100.0/24 -j ACCEPT

# Allow HTTP/HTTPS from anywhere
iptables -A INPUT -p tcp -m multiport --dports 80,443 -j ACCEPT

# Allow ICMP (ping) with rate limiting
iptables -A INPUT -p icmp --icmp-type echo-request -m limit --limit 1/s --limit-burst 4 -j ACCEPT

# Log dropped packets (rate limited to avoid log flooding)
iptables -A INPUT -m limit --limit 5/min -j LOG --log-prefix "IPTABLES-DROP: " --log-level 4

# Save rules (Debian/Ubuntu)
iptables-save > /etc/iptables/rules.v4
ip6tables-save > /etc/iptables/rules.v6

Anti-DDoS Rules

# SYN flood protection
iptables -A INPUT -p tcp --syn -m limit --limit 25/s --limit-burst 50 -j ACCEPT
iptables -A INPUT -p tcp --syn -j DROP

# Limit new connections per source IP
iptables -A INPUT -p tcp --dport 80 -m connlimit --connlimit-above 50 -j REJECT

# Block port scanning (detect TCP flags abuse)
iptables -A INPUT -p tcp --tcp-flags ALL NONE -j DROP
iptables -A INPUT -p tcp --tcp-flags ALL ALL -j DROP
iptables -A INPUT -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP
iptables -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
iptables -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP

Application-Specific Rules

# Web server with database backend
# Allow app servers to reach database (port 5432)
iptables -A INPUT -p tcp --dport 5432 -s 10.0.1.0/24 -j ACCEPT

# Allow monitoring (Prometheus node exporter)
iptables -A INPUT -p tcp --dport 9100 -s 10.0.200.0/24 -j ACCEPT

# DNS resolution
iptables -A INPUT -p udp --sport 53 -j ACCEPT
iptables -A INPUT -p tcp --sport 53 -j ACCEPT

# NTP
iptables -A INPUT -p udp --sport 123 -j ACCEPT

# Block specific IP (incident response)
iptables -I INPUT 1 -s 203.0.113.50 -j DROP

UFW (Uncomplicated Firewall)

# Enable UFW with default deny
ufw default deny incoming
ufw default allow outgoing
ufw enable

# Allow SSH from management network
ufw allow from 10.0.100.0/24 to any port 22 proto tcp

# Allow HTTP/HTTPS
ufw allow 80/tcp
ufw allow 443/tcp

# Allow specific application profile
ufw allow 'Nginx Full'

# Rate limit SSH (max 6 connections in 30 seconds)
ufw limit ssh

# Allow port range
ufw allow 8000:8080/tcp

# Deny specific IP
ufw deny from 203.0.113.50

# Check status
ufw status verbose
ufw status numbered

# Delete a rule by number
ufw delete 3

# Application profiles
ufw app list
ufw app info 'Nginx Full'

nftables

Complete Server Configuration

#!/usr/sbin/nft -f
flush ruleset

# Define variables
define LAN = 10.0.0.0/16
define MGMT = 10.0.100.0/24
define MONITOR = 10.0.200.0/24

table inet filter {
  # Rate limiting set
  set rate_limit {
    type ipv4_addr
    flags dynamic,timeout
    timeout 1m
  }

  chain input {
    type filter hook input priority 0; policy drop;

    # Connection tracking
    ct state established,related accept
    ct state invalid drop

    # Loopback
    iif "lo" accept

    # ICMP and ICMPv6
    ip protocol icmp icmp type { echo-request, destination-unreachable, time-exceeded } limit rate 10/second accept
    ip6 nexthdr icmpv6 icmpv6 type { echo-request, nd-neighbor-solicit, nd-router-advert } accept

    # SSH from management only
    tcp dport 22 ip saddr $MGMT accept

    # HTTP/HTTPS from anywhere
    tcp dport { 80, 443 } accept

    # Prometheus metrics from monitoring subnet
    tcp dport 9100 ip saddr $MONITOR accept

    # Rate limit new connections
    tcp flags syn limit rate over 25/second burst 50 packets drop

    # Log dropped traffic
    log prefix "nft-drop: " level warn limit rate 5/minute
  }

  chain forward {
    type filter hook forward priority 0; policy drop;
  }

  chain output {
    type filter hook output priority 0; policy accept;

    # Optional: restrict outbound to known destinations
    # tcp dport { 80, 443, 53 } accept
    # udp dport { 53, 123 } accept
    # ct state established,related accept
    # drop
  }
}

# NAT table for port forwarding
table ip nat {
  chain prerouting {
     nat hook prerouting priority -100;
    
    tcp dport 8080 dnat to 10.0.1.10:8080
  }

  chain postrouting {
     nat hook postrouting priority 100;
    oifname  masquerade
  }
}

nftables Management Commands

# Load configuration
nft -f /etc/nftables.conf

# List all rules
nft list ruleset

# List specific table
nft list table inet filter

# Add a rule dynamically
nft add rule inet filter input tcp dport 8443 accept

# Insert rule at position
nft insert rule inet filter input position 5 ip saddr 10.0.50.0/24 tcp dport 3306 accept

# Delete a rule by handle
nft -a list chain inet filter input  # show handles
nft delete rule inet filter input handle 15

# Monitor in real time
nft monitor

AWS Security Groups

Terraform Configuration

# Web tier security group
resource "aws_security_group" "web" {
  name_prefix = "web-sg-"
  vpc_id      = aws_vpc.main.id
  description = "Security group for web servers"

  ingress {
    description = "HTTPS from internet"
    from_port   = 443
    to_port     = 443
    protocol    = "tcp"
    cidr_blocks = ["0.0.0.0/0"]
  }

  ingress {
    description = "HTTP redirect"
    from_port   = 80
    to_port     = 80
    protocol    = "tcp"
    cidr_blocks = ["0.0.0.0/0"]
  }

  egress {
    description = "All outbound"
    from_port   = 0
    to_port     = 0
    protocol    = "-1"
    cidr_blocks = ["0.0.0.0/0"]
  }

  tags = {
    Name        = "web-sg"
    Environment = "production"
    ManagedBy   = "terraform"
  }
}

# App tier - only accepts traffic from web tier
resource "aws_security_group" "app" {
  name_prefix = "app-sg-"
  vpc_id      = aws_vpc.main.id
  description = "Security group for application servers"

  ingress {
    description     = "HTTP from web tier"
    from_port       = 8080
    to_port         = 8080
    protocol        = "tcp"
    security_groups = [aws_security_group.web.id]
  }

  egress {
    from_port   = 0
    to_port     = 0
    protocol    = "-1"
    cidr_blocks = ["0.0.0.0/0"]
  }
}

# Database tier - only accepts from app tier
resource "aws_security_group" "db" {
  name_prefix = "db-sg-"
  vpc_id      = aws_vpc.main.id
  description = "Security group for database servers"

  ingress {
    description     = "PostgreSQL from app tier"
    from_port       = 5432
    to_port         = 5432
    protocol        = "tcp"
    security_groups = [aws_security_group.app.id]
  }

  egress {
    from_port   = 0
    to_port     = 0
    protocol    = "-1"
    cidr_blocks = ["0.0.0.0/0"]
  }
}

AWS CLI Commands

# Create security group
aws ec2 create-security-group \
  --group-name web-sg \
  --description "Web server SG" \
  --vpc-id vpc-0abc123

# Add inbound rule
aws ec2 authorize-security-group-ingress \
  --group-id sg-0abc123 \
  --protocol tcp --port 443 \
  --cidr 0.0.0.0/0

# Add rule referencing another security group
aws ec2 authorize-security-group-ingress \
  --group-id sg-0db456 \
  --protocol tcp --port 5432 \
  --source-group sg-0app789

# Remove a rule
aws ec2 revoke-security-group-ingress \
  --group-id sg-0abc123 \
  --protocol tcp --port 22 \
  --cidr 0.0.0.0/0

# Describe rules
aws ec2 describe-security-group-rules \
  --filters Name=group-id,Values=sg-0abc123

Firewall Rule Audit Script

#!/bin/bash
# firewall-audit.sh - Audit current firewall rules for common issues

echo "=== Firewall Audit Report ==="
echo "Date: $(date -u +%Y-%m-%dT%H:%M:%SZ)"
echo "Host: $(hostname)"
echo ""

# Check if firewall is active
if command -v nft &>/dev/null; then
    echo "--- nftables rules ---"
    nft list ruleset
elif command -v iptables &>/dev/null; then
    echo "--- iptables rules ---"
    iptables -L -n -v --line-numbers
fi

echo ""
echo "--- Open ports ---"
ss -tlnp

echo ""
echo "--- Potential issues ---"

# Check for overly permissive rules
if iptables -L INPUT -n 2>/dev/null | grep -q "0.0.0.0/0.*dpt:22"; then
    echo "WARNING: SSH (port 22) open to 0.0.0.0/0 - restrict to management subnet"
fi

if iptables -L INPUT -n 2>/dev/null | grep -q "0.0.0.0/0.*dpt:3306"; then
    echo "CRITICAL: MySQL (port 3306) open to 0.0.0.0/0"
fi

if iptables -L INPUT -n 2>/dev/null | grep -q "0.0.0.0/0.*dpt:5432"; 
     



DEFAULT_INPUT=$(iptables -L INPUT 2>/dev/null |  -1 | grep -oP )
 [  =  ]; 
     

Troubleshooting

Problem	Cause	Solution
Locked out of SSH	Rule order or default deny applied before allow	Use out-of-band console access; add SSH allow rule first
Rules lost after reboot	Rules not persisted	Install iptables-persistent or save to /etc/nftables.conf
Docker bypasses iptables	Docker modifies iptables FORWARD chain	Use DOCKER-USER chain for custom rules; set "iptables": false in daemon.json
nftables and iptables conflict	Both running simultaneously	Migrate fully to nftables; remove iptables packages
AWS SG rule limit reached	Max 60 inbound rules per SG	Use prefix lists or consolidate CIDR ranges
Legitimate traffic blocked	Rule ordering issue	Place more specific allow rules before general deny rules

Best Practices

• Default deny policy on all chains
• Minimal rule sets - only open what is required
• Regular rule audits (monthly minimum)
• Log denied traffic for security monitoring
• Document all rules with descriptions and ticket references
• Use connection tracking for stateful inspection
• Rate limit inbound connections to prevent DDoS
• Separate management traffic from application traffic
• Test rule changes in staging before production
• Keep persistent backups of working rule sets

Related Skills

• linux-hardening - System security
• aws-vpc - AWS networking
• zero-trust - Identity-based access patterns
• vpn-setup - Secure tunnel configuration