bithumb-deposit

name	bithumb-deposit
description	Manage Bithumb deposits: deposit address generation/lookup, deposit history (crypto and KRW), and KRW deposit requests. Requires API credentials. Do NOT use for deposit availability status (whether deposits are currently enabled) — use bithumb-account. 빗썸 입금 주소 조회·생성, 코인·원화 입금 내역 확인, 원화 입금 요청을 처리합니다. 입금 주소·입금 내역·원화 입금 관련 요청에 사용하세요. 입금 가능 여부 상태는 bithumb-account를 사용하세요.

Bithumb Deposit CLI

Deposit address management, deposit history, and KRW (원화) deposit requests on Bithumb exchange. Requires API credentials.

Tool Routing

Writes are CLI-first: when both the Bithumb CLI and MCP tools exist, use the bithumb ... CLI for writes (it carries per-profile read-only enforcement, account isolation, and reproducibility that MCP lacks); fall back to MCP only if the CLI is unavailable/fails or the user asks. Reads: either path is fine.

Prerequisites

Install the CLI (npm install -g @bithumb-official/bithumb-cli) and set credentials (BITHUMB_ACCESS_KEY, BITHUMB_SECRET_KEY).

Skill Routing

Market data → bithumb-market; account assets / wallet status / deposit availability → bithumb-account; orders → bithumb-trade; withdrawals → bithumb-withdraw; audit logs / diagnostics → bithumb-system. Deposits (this skill).

Command Index

#	Command	Type	Description
1	bithumb deposit addresses	READ	Get all deposit addresses
2	bithumb deposit address	READ	Get deposit address for specific currency + network
3	bithumb deposit generate-address	WRITE	Generate new deposit address
4	bithumb deposit get	READ	Get a single deposit by deposit ID or txid
5	bithumb deposit list	READ	List coin deposit history
6	bithumb deposit list-krw	READ	List KRW deposit history
7	bithumb deposit krw	WRITE	Request KRW deposit (2FA required)

See deposit-commands.md for per-command parameters, examples, and input-format details.

---

Operation Flow

🛑 Mandatory Pre-flight Checklist — deposit krw / deposit generate-address

Before any write operation in this skill, run all of the following in order. Do not skip steps even if the user says "just do it". Stop and ask for explicit user confirmation between step 2 and step 3.

#	Command	Purpose
0	bithumb config show --json	Read-only gate (run first, both writes). Read the effective profile's read_only. If true, stop here — do not run steps 1–3. List write-capable profiles and ask the user to re-run with --profile <name> (never bypass read-only — do not auto-select a profile, switch profiles, or disable read_only yourself; see gate). Once-per-session: skip if already checked. See read-only-gate.md.
1	For generate-address: discover the valid net_type first (bithumb deposit addresses or bithumb withdraw chance --currency <c>). For krw: confirm the exact KRW amount	Avoid wrong-network address generation / wrong amount
2	🤚 Stop. Ask user to confirm: for generate-address — currency + net_type; for krw — amount, and that Kakao 2FA will be triggered	Explicit approval
3	generate-address: bithumb deposit generate-address --currency <c> --net-type <n> / krw: bithumb deposit krw --amount <a> --two-factor-type kakao	Execute
4	generate-address: bithumb deposit address --currency <c> --net-type <n> (confirm new address) / krw: bithumb deposit list-krw (check status)	Verify after write

Step 1 — Identify deposit action (route to a command)

User intent	Command
First time / multi-network coin (USDT, USDC, XRP, etc.) — discover available net_types	bithumb deposit addresses or bithumb withdraw chance --currency <c> to list valid net_type values before any address call
View all deposit addresses	bithumb deposit addresses
Get address for specific coin + network	bithumb deposit address --currency BTC --net-type BTC
Generate new deposit address (WRITE)	run the Pre-flight Checklist above
Look up one deposit by txid / deposit ID (single identifier)	bithumb deposit get --currency BTC --txid "<txid>"
Look up / search deposits by multiple or no identifiers	bithumb deposit list (coin) / bithumb deposit list-krw (KRW)
Request KRW deposit (WRITE)	run the Pre-flight Checklist above

Identifier rule (txid first): deposits use txid as the primary identifier. A bare numeric ID is ambiguous (KRW txid and deposit_id are both numeric), so query --txids first → if empty, retry the same value with --deposit-ids (or ask) before concluding "not found". Special-char/space/comma txids must use single get, not list. Details in deposit-commands.md.

Read commands (addresses, address, get, list, list-krw) run immediately — no gate.

---

Edge Cases (safety-critical)

🌐 Multi-network coins (USDT, USDC, XRP, etc.): The same currency may have multiple net_type values. Before any deposit address call, discover the real values with bithumb deposit addresses or bithumb withdraw chance --currency <c>. Using a wrong net_type results in permanent loss of funds. Never guess — always discover first.

• Secondary address (memo/tag): XRP, EOS, ATOM, and similar coins require a secondary_address. Always display it when present. Step 4 verify: confirm secondary_address is shown for these currencies — if missing, do NOT proceed with the deposit.
• XRP net_type: --net-type XRP may not be valid in all environments. Run bithumb deposit addresses first and use the actual registered net_type — do not assume XRP.
• KRW deposit 2FA: deposit krw requires Kakao authentication; the user must complete 2FA on their phone.
• Block confirmations: Crypto deposits require blockchain confirmations. Check bithumb account wallet-status (in bithumb-account) for block sync status before deposits.
• Deposit states: KRW — PROCESSING / ACCEPTED / CANCELLED. Coin states differ (UPPERCASE, e.g. DEPOSIT_PROCESSING); see deposit-commands.md.

Global Notes

• When you query deposits (deposit list / list-krw / get) and present the result to the user, always include each entry's deposit_id — they need it to look up the deposit later.
• All commands require valid API credentials.
• Bithumb has no demo mode — all deposit operations are real (real funds).
• --json returns raw Bithumb API response (any command).