hmem-sync-setup

name	hmem-sync-setup
description	Set up hmem-sync for cross-device memory sync. Use on 'sync einrichten', 'setup sync', or when /hmem-config detects hmem-sync is missing. Covers first-device setup, additional-device restore, and MCP auto-sync.

hmem-sync Setup

Zero-knowledge encrypted sync for hmem. Memories are encrypted client-side (AES-256-GCM) before leaving the device — the server only sees opaque blobs.

Recommended: Use hmem-sync connect

The connect command replaces setup and restore with a single smart wizard:

npx hmem-sync connect

It automatically:

1. Asks for credentials (new account or existing)
2. Detects local DB + server data
3. Shows entry counts on both sides
4. Asks the user what to sync (push, pull, merge, or skip)
5. Verifies the result

Custom / Self-hosted servers: The --server-url flag accepts any hmem-sync compatible server, not just the default. Examples: https://yourdomain.com/hmem-sync for a self-hosted instance, or http://localhost:3100 for a local development server.

For non-interactive use:

# New account
npx hmem-sync connect --user-id myname --passphrase "pass" --hmem-path ~/.hmem/memory.hmem

# Existing account
npx hmem-sync connect --user-id myname --passphrase "pass" --token abc123... --hmem-path ~/.hmem/memory.hmem

# Custom server
npx hmem-sync connect --server-url http://localhost:3100 --user-id myname --passphrase "pass" --hmem-path ~/.hmem/memory.hmem

The legacy setup and restore commands still work for backwards compatibility.

Legacy: Determine the scenario

If not using connect, pick manually:

A) First device — no sync account exists yet → hmem-sync setup B) Additional device — account exists on another machine → hmem-sync restore

---

Scenario A: First Device Setup

Step 1: Install hmem-sync

npm install -g hmem-sync

Step 2: Run interactive setup

npx hmem-sync setup

This will:

1. Ask for the sync server URL (default: https://sync.hmem.dev)
2. Generate a salt + encryption key from a passphrase you choose
3. Register with the server → receive an auth token
4. Save config files next to your .hmem file

Important: Remember the passphrase — it's the encryption key. Losing it means losing access to synced data. There is no recovery.

Step 3: Enable auto-sync in MCP

Add HMEM_SYNC_PASSPHRASE to your .mcp.json env block:

{
  "mcpServers": {
    "hmem": {
      "env": {
        "HMEM_PATH": "/path/to/your/memory.hmem",
        "HMEM_SYNC_PASSPHRASE": "your-passphrase-here"
      }
    }
  }
}

Without this, hmem works normally but won't auto-sync. With it, every read_memory pulls and every write_memory pushes automatically (with 30s cooldown).

Step 4: Initial push

npx hmem-sync push

Step 5: Save credentials for additional devices

The user needs these values on their other devices:

• Server URL — from .hmem-sync-config.json
• User ID — from .hmem-sync-config.json
• Token — from .hmem-sync-token
• Passphrase — the one they chose in Step 2

Show the user where these files are (in the same directory as your .hmem file):

cat "$(dirname "$HMEM_PATH")/.hmem-sync-config.json"
cat "$(dirname "$HMEM_PATH")/.hmem-sync-token"

---

Scenario B: Additional Device (Restore)

Step 1: Install hmem-sync

npm install -g hmem-sync

Step 2: Gather credentials from the original device

The user needs:

• Server URL (e.g. https://your-server.example.com/hmem-sync)
• User ID (e.g. bbbee)
• Token (64-char hex string from .hmem-sync-token)
• Passphrase (same as original device)

Step 3: Run restore

npx hmem-sync restore

This prompts for all values interactively. Or pass them as flags:

npx hmem-sync restore \
  --server-url https://sync.example.com/hmem-sync \
  --user-id myname \
  --token abc123... \
  --passphrase "my passphrase" \
  --hmem-path ~/.hmem/memory.hmem

IMPORTANT: The --hmem-path must point to the exact .hmem file path. The filename is used as identity for sync — it must match across devices.

Step 4: Verify

After restore, the output shows entry count and path:

✓ Restore complete: 325 entries in ~/.hmem/memory.hmem

Set HMEM_PATH in your .mcp.json to this path.

Step 5: Configure MCP (same as Scenario A, Step 3)

Add HMEM_SYNC_PASSPHRASE to .mcp.json env block and restart the AI tool.

---

Urgent Announcements

Broadcast messages to all synced devices. Each device sees announcements once on the next pull.

When to send

• Server migration (new URL, DNS change)
• Breaking config changes (e.g. "update maxL1Chars to 200")
• Security issues (compromised token, rotate credentials)
• Coordinated action needed across all devices

How to send

# From the directory containing .hmem-sync-config.json:
npx hmem-sync announce --message "Server URL changing to https://new-server/hmem-sync"

# Or via curl:
curl -X POST https://server/hmem-sync/announcements \
  -H "Authorization: Bearer $TOKEN" \
  -H "Content-Type: application/json" \
  -d '{"message":"Your urgent message here"}'

How to edit or delete

# List all announcements:
curl -s https://server/hmem-sync/announcements -H "Authorization: Bearer $TOKEN"

# Edit (by ID from list):
curl -X PUT https://server/hmem-sync/announcements/2 \
  -H "Authorization: Bearer $TOKEN" \
  -H "Content-Type: application/json" \
  -d '{"message":"Corrected message"}'

# Delete:
curl -X DELETE https://server/hmem-sync/announcements/2 \
  -H "Authorization: Bearer $TOKEN"

When you RECEIVE an announcement

Announcements appear as yellow warnings before pull output. They indicate urgent action is needed.

Act on them immediately — before any other work. Do not write to memory, do not start tasks. Read the message, execute the requested action (config change, URL update, etc.), verify it worked, then continue with normal work.

---

Troubleshooting

Problem	Cause	Fix
401 Token verification failed	Passphrase special chars broken by shell	Use --passphrase flag or HMEM_SYNC_PASSPHRASE env in .mcp.json
Config not found	hmem-sync looks in wrong directory	Run from the directory containing your .hmem file, or use --config flag
0 entries after sync	Different HMEM_PATH filename on devices	Filename must match — it's used as sync identity
read_memory returns empty	~/.claude.json caches old HMEM_PATH	Check ~/.claude.json for stale MCP env overrides
"npm ERR" on update	Running npm update inside a project dir	Always use npm update -g hmem-sync (global flag!)

Path Convention

HMEM_PATH points directly to the .hmem file (e.g. ~/.hmem/memory.hmem)
The parent directory is derived automatically.

Config files are always stored next to the .hmem file:

.hmem-sync-config.json  — server URL, user ID, salt (not secret)
.hmem-sync-token        — auth token (chmod 600, never commit)
.hmem-sync.json         — sync state (last push/pull timestamps)

Multi-Server Sync

For redundancy, you can configure multiple servers in hmem.config.json as an array. hmem-sync will push to and pull from all configured servers, so data survives if one server goes down. See the hmem-sync README for the exact schema.