cash-apply

name	cash-apply
description	Implement Spectra tasks with a sub-agent quality gate after completion
license	MIT
metadata	{"author":"spectra","version":"1.0","compatibility":"Requires spectra CLI."}

Implement tasks from a Spectra change.

Input: Optionally specify a change name (e.g., /cash-apply add-auth). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.

Task tracking is file-based only. The tasks file's markdown checkboxes (- [ ] / - [x]) are the single source of truth for progress. Do NOT use any external task management system, built-in task tracker, or todo tool. When a task is done, edit the checkbox in the tasks file — that is the only way to record progress.

Prerequisites: This skill requires the spectra CLI. If any spectra command fails with "command not found" or similar, report the error and STOP.

Steps

1. Select the change

   If a name is provided, use it. Otherwise:

   • Infer from conversation context if the user mentioned a change
   • Auto-select if only one active change exists
   • If ambiguous, run spectra list --json AND spectra list --parked --json to get all available changes (including parked ones). Parked changes should be annotated with "(parked)" in the selection list. Use the AskUserQuestion tool to let the user select

   Always announce: "Using change: " and how to override (e.g., /cash-apply <other>).

2. Check status to understand the schema

   spectra status --change "<name>" --json
   

   If the command fails: show the error and STOP.

   If the command succeeds, check whether the change is parked (status can succeed even for parked changes):

   spectra list --parked --json
   

   Look for the change name in the parked array of the JSON output.

   • If the change IS in the parked list (it's parked): Inform the user that this change is currently parked（暫存）. Use the AskUserQuestion tool to ask whether to continue. Two options:

     • Continue: Unpark the change and proceed with apply
     • Cancel: Stop the workflow

     If the user chooses to continue:

     spectra unpark "<name>"
     

     Then mark it as in-progress:

     spectra in-progress add "<name>"
     

     This is a silent operation — do not show the output to the user.

     Then re-run spectra status --change "<name>" --json and continue normally.

     If there is no AskUserQuestion tool available (non-Claude-Code environment): Inform the user that this change is currently parked（暫存）and ask via plain text whether to unpark and continue, or cancel. Wait for the user's response. If the user confirms, run spectra unpark "<name>", then set spectra in-progress add "<name>", and continue normally.

   • If the change is NOT in the parked list: mark it as in-progress and proceed normally.

     spectra in-progress add "<name>"
     

     This is a silent operation — do not show the output to the user.

   Parse the JSON to understand:

   • schemaName: The workflow being used (e.g., "spec-driven")
   • Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)

3. Get apply instructions

   spectra instructions apply --change "<name>" --json
   

   This returns:

   • Context file paths (varies by schema)
   • Progress (total, complete, remaining)
   • Task list with status
   • Dynamic instruction based on current state

   Handle states:

   • If state: "blocked" (missing artifacts): show message, suggest using /cash-propose to create the change artifacts first
   • If state: "all_done": continue to the cash quality gate before any archive guidance
   • Otherwise: proceed to implementation

3b. Preflight check

If the apply instructions JSON includes a preflight field, act on its status:

• "clean": silently continue — no output needed.

• "warnings": display a brief summary, then continue automatically:

  ⚠ Preflight warnings:
  - Drifted files (modified after change was created): <list paths>
  - Change is <N> days old
  Continuing...
  

  Only show the lines that are relevant (skip drifted if none, skip staleness if not stale).

• "critical": display missing files with their source artifact, then use the AskUserQuestion tool to ask the user:

  ⚠ Preflight: missing files detected
  - <path> (referenced in <source artifact>)
  - ...
  These files are referenced in the change artifacts but no longer exist on disk.
  

  Options: "Continue anyway" / "Stop" If the user chooses "Stop", end the workflow.

  If there is no AskUserQuestion tool available: Display the same information as plain text and ask whether to continue or stop. Wait for the user's response.

If the preflight field is absent (blocked or all_done states), skip this step.

3c. Artifact quality check

Run spectra analyze <change-name> --json to check cross-artifact consistency (Coverage, Consistency, Ambiguity, Gaps).

• Zero findings: silently continue.

• Warning/Suggestion only: display a one-line summary (e.g., "⚠ Artifact analysis: 2 warnings found") and continue automatically.

• Critical findings: display each Critical finding (summary + location + recommendation), then use the AskUserQuestion tool:

  • Fix and continue — fix the artifact issues inline, then proceed
  • Continue anyway — skip fixes and start implementation
  • Stop — end the workflow

  If there is no AskUserQuestion tool available, present options as plain text and wait for the user's response.

3d. Drift dormancy check (passive trigger for stale changes)

When the change has been dormant for more than 5 days AND the change directory has had zero commits in the past 3 days, surface a drift report before tasks begin — the change is likely out-of-sync with the current codebase.

Detect dormancy from .openspec.yaml created and git log -1 --format=%at -- openspec/changes/<name>/:

• Both conditions met: run spectra drift <change-name>, display the report, then use the AskUserQuestion tool:
  • Continue with apply — proceed to tasks (recommended for Light drift)
  • Refresh first — pause apply, run /cash-ingest <change-name> to update artifacts, then resume
  • Stop — end the workflow
• Either condition not met: silently continue, no output.

The trigger is guidance only — it MUST NOT block apply from proceeding when the user chooses to continue. Hard-blocking on dormancy would punish legitimate "I came back after a long weekend" cases.

(Threshold reasoning: AI-assisted commits are daily-cadence. ≥5 days dormant + ≥3 days no commit ≈ genuine stagnation, not normal pacing.)

If there is no AskUserQuestion tool available, present options as plain text and wait for the user's response.

4. Read context files

   Read the files listed in contextFiles from the apply instructions output. The files depend on the schema being used:

   • spec-driven: proposal, specs, design, tasks
   • Other schemas: follow the contextFiles from CLI output

5. Check project preferences

   Read .spectra.yaml in the project root. If tdd: true is set, apply TDD discipline throughout implementation:

   • For each task, write a failing test FIRST, then implement to make it pass
   • Fetch TDD instructions by running spectra instructions --skill tdd, then follow the Red-Green-Refactor cycle
   • For bug fixes, reproduce the bug with a failing test before fixing

   If audit: true is set, apply sharp-edges discipline throughout implementation:

   • When designing APIs or interfaces, evaluate through 3 adversary lenses (Scoundrel, Lazy Developer, Confused Developer)
   • When adding configuration options, verify defaults are secure and zero/empty values are safe
   • When accepting parameters, check for type confusion and silent failures
   • Fetch audit instructions by running spectra instructions --skill audit, follow the discipline checklist (not the standalone 3-agent workflow)

   If parallel_tasks: true is set, check whether consecutive pending tasks have [P] markers (format: - [ ] [P] Task description). You SHALL dispatch consecutive [P] tasks as parallel agents. Only fall back to sequential when tasks have a data dependency (one task's output is another's input) or when tasks modify overlapping regions of the same file. Targeting the same file alone is NOT a reason to skip parallel dispatch — if the modified regions are disjoint, dispatch in parallel. If the environment does not support parallel execution, ignore [P] markers and execute tasks sequentially.

6. Show current progress

   Display:

   • Schema being used
   • Progress: "N/M tasks complete"
   • Remaining tasks overview
   • Dynamic instruction from CLI

7. Implement tasks (loop until done or blocked)

   Reminder: Track progress by editing checkboxes in the tasks file only. Do not use any built-in task tracker.

   For each pending task:

   • Show which task is being worked on
   • Re-read the sections of design and spec files that are relevant to this task's scope — do not rely on memory from earlier in the conversation, as context may have been compressed
   • Read the Implementation Contract for this task before editing any source file. If design.md exists and contains an ## Implementation Contract section (or contract content under another heading the design uses), read the part of it that covers this task's scope. The contract names the observable behavior, interface or data shape, failure modes, acceptance criteria, and scope boundaries you must satisfy. Treat the contract as the durable handoff — it is what the task will be measured against, regardless of who started the change.
   • Detect unclear or path-only tasks before writing code. A task is unclear if it:
     • only names files to edit ("edit foo.rs", "update bar.svelte") with no behavior, contract, or verification target;
     • is vague ("handle edge cases", "wire it up", "make it work");
     • conflicts with the implementation contract (asks for behavior the contract excludes, or omits behavior the contract requires). When this happens, pause. Either update the artifact (design or tasks) so the task names a concrete behavior and verification target, or report the blocker and wait for guidance. Do NOT silently guess against unclear requirements.
   • Before writing code, check:
     1. Reuse — search adjacent modules and shared utilities for existing implementations before writing new code
     2. Quality — derive values from existing state instead of duplicating; use existing types and constants over new literals
     3. Efficiency — parallelize independent async operations; avoid unnecessary awaits; match operation scope to actual need
     4. No Placeholders in artifacts — if the design or spec for this task contains placeholder language (TBD, TODO, "add appropriate handling"), pause and fix the artifact first or flag to the user. Do not implement against vague requirements.
     5. Examples as verification — if the spec for this task's scope includes ##### Example: blocks, use them as concrete test cases:
        • When TDD is enabled: derive the first failing test directly from the example's GIVEN/WHEN/THEN values
        • When TDD is not enabled: after implementing, verify the code handles the example's input→output correctly
        • Example tables map to parameterized tests — one test per row Do NOT invent additional test values beyond what the spec examples provide without reason. The examples ARE the agreed specification.
   • Make the code changes required
   • Keep changes minimal and focused
   • Verify before marking done — re-read the task description from the tasks file AND the relevant Implementation Contract content from design.md. For each requirement stated in the task description and each contract item that covers this task's scope, confirm it is addressed by your changes. Confirm the verification target named by the task (test name, CLI invocation, analyzer check, or manual assertion) actually passes. If any contract item, task requirement, or verification target is missing or failing, implement/fix it now. Do not mark the task complete until every part of the description is covered and the contract for this task is satisfied.
   • Mark task complete by running: spectra task done --change "<name>" <task-id> This command marks the checkbox in tasks.md AND records which files were modified for this task.
   • Continue to next task

   Parallel task dispatch: When consecutive [P]-marked tasks are found and parallel_tasks: true is configured (see Step 5), dispatch them as parallel agents in a single message. If any [P] task fails, pause and report.

   Pause if:

   • Task is unclear → ask for clarification
   • Implementation reveals a design issue → suggest updating artifacts
   • Error or blocker encountered → report and wait for guidance
   • User interrupts

---

Rationalization Table

What You're Thinking	What You Should Do
"This task looks done, I'll mark it complete"	Re-read the task description first. Check whether your diff covers every part of it. Incomplete tasks marked done are the #1 source of rework
"This task is trivial, I don't need to re-read the design"	Re-read. Context compression loses details. 30s of reading saves 30min of rework
"I already know how this works, skip the code search"	Search anyway. Someone may have added a utility since you last looked
"The test is obvious, I'll add it after implementation"	If TDD is enabled, test first. If not, still write it before marking done
"This is just a small refactor, no test needed"	Small refactors are how regressions sneak in. Write the test
"The artifact says X but Y makes more sense"	Pause and suggest updating the artifact. Don't silently deviate
"I'll fix this other thing I noticed while I'm here"	Finish current task first. Address the other thing separately
"The example values are just illustrations, I'll pick better ones"	Use the spec example values exactly. They were chosen deliberately

---

Surgical & Simplicity Discipline

在 step 7 的 task loop 期間，編輯任何來源碼之前必須套用以下兩項紀律。它們補充（而不取代）既有的 Reuse / Quality / Efficiency / No Placeholders / Examples as verification 檢查。

Simplicity First — 寫最少能解決任務的程式碼

• 不要實作 tasks.md 任務描述與 design.md Implementation Contract 以外的功能。
• 不要為單一使用情境引入抽象層、設定選項或「彈性」；YAGNI 優先於可擴充性。
• 不要為 contract 已排除或型別已保證的情境撰寫錯誤處理；只在系統邊界（外部輸入、外部 API）驗證。
• 完成後若發現實作行數遠超必要（例如 200 行能壓到 50 行），先檢查是否過度設計，必要時重寫成更小的版本。
• 自問：「資深工程師會不會說這太複雜？」如果會，就簡化。

Surgical Changes — 只動該動的，且只清自己造成的殘骸

• 不要「順手」改鄰近區塊的程式碼、註解或格式。
• 不要重構沒壞的東西；不要為了個人風格偏好改既有寫法。
• 即使既有風格與你習慣不同，跟著現況走（match existing style）。
• 若注意到不相關的死碼、bug 或可改進處，不要直接刪或改 — 依照 Implementation Notes Protocol 在 implementation-notes.md 以 open-question 條目記錄，交給使用者決定。
• 只移除「因為本次改動而變成 orphan」的 import、變數、函式；既有的 pre-existing 死碼不要動。
• 驗收標準：本次 diff 的每一行，都能直接追溯到 tasks.md 中的某條任務或 design.md 中的 Implementation Contract 項目。

Maintain Balance — Simplicity 不等於程式碼高爾夫

Simplicity First 與 Surgical Changes 的目的是「不寫不必要的東西」，不是「越短越好」。下列反例同樣違反紀律，被 review loop 視為 Critical：

• 巢狀三元運算子（nested ternary）— 用 if/else 或 switch 替代。
• 為了減少行數犧牲可讀性的 dense one-liner、過度連鎖的 method chain。
• 為了「合併」把多個關注點塞進同一個 function、component 或檔案。
• 移除有意義的中介變數，讓 expression 變成難以閱讀或除錯的長句。
• 移除真正在傳遞意圖的命名常數，改用 magic number 或 inline literal。
• 拿掉合理的抽象（helper、type alias）只為了減少一層間接。

判準：實作完成後重讀 diff，若 future-self 或 reviewer 需要花超過幾秒才能理解某行的意圖，那不是 simpler，是 cleverer。Cleverer 違反紀律。Clarity 永遠優先於 brevity。

若違反上述任一條（無論刻意或非刻意），視同 task 未完成 — 在執行 spectra task done 之前先修正。若是刻意 deviate（例如 contract 與既有程式衝突，需要動到鄰近區塊），依 Implementation Notes Protocol 寫一筆 deviation 條目，說明原因。

Keep verbatim (do not translate): shell commands, file paths, code identifiers, schema field names (applyRequires, outputPath 等), artifact IDs, capability slugs, and quoted source text. If the user explicitly requests another language later, follow the latest user instruction.

8. Implementation Notes Protocol

   During the cash-apply task loop, maintain a lightweight running log at openspec/changes/<change>/implementation-notes.md that captures only two categories of information:

   • Deviations: places where the implementation intentionally departs from spec.md, design.md, or tasks.md (because the spec was ambiguous, the codebase reality differs, or a discovered issue forced a different path).
   • Open questions: items that need user confirmation or revision before this change can be considered complete.

   Design decisions that match the spec, ordinary tradeoffs, and small judgment calls do NOT belong here — they are already covered by design.md, tasks.md, and the review-loop round files. Keep this log narrow.

   File creation rule (eager)

   • At the start of Step 7 (the task loop), before processing the first task, create openspec/changes/<change>/implementation-notes.md if it does not already exist.
   • Initialize the file with a single-line HTML comment header (and nothing else):

     <!-- cash-apply implementation notes | change: <change-name> | initialized: <YYYY-MM-DD HH:MM> | no entries below means no deviations or open questions were recorded -->
     

   • Entries (see below) are appended in order beneath this header.
   • Eager creation makes "no entries" an explicit positive signal (cash-apply ran and found nothing to report), distinct from file-absent which signals a workflow integrity failure.

   Entry format

   Each entry MUST be appended (never rewriting earlier entries) using this exact structure:

   ## <YYYY-MM-DD HH:MM> — <short title>
   - 類別：deviation | open-question
   - 任務：<task-id or "n/a">
   - 內容：<one-paragraph description of what happened or what needs answering>
   - 原因：<why this path was chosen, or why the user needs to weigh in>
   

   Prose (內容, 原因, title) is written in Traditional Chinese, matching the cash-apply response-language rule. CLI commands, file paths, code identifiers, capability slugs, and quoted source text remain verbatim in English.

   When to write an entry

   • When task-level implementation diverges from design.md Implementation Contract, tasks.md description, or relevant spec.md requirements — write a deviation entry before marking the task done.
   • When the task surfaces a question the user must decide (e.g. ambiguous requirement, missing schema field, contested naming) and the agent has to proceed under an assumption — write an open-question entry naming the assumption.
   • Do not batch entries to the end of the session; record at the moment the decision is made, while context is fresh.

   When NOT to write an entry

   • Routine implementation that matches the artifacts — no entry.
   • Trivial naming or formatting choices — no entry.
   • Anything already documented in design.md or the round-<N> review files — no entry.

   Sub-agent reviewer requirement

   Reviewer A — Adherence in the Sub-Agent Review/Rating/Fix Loop MUST, at the start of each full round, read openspec/changes/<change>/implementation-notes.md. In each micro round, Reviewer V MUST read the same file before verifying fixes.

   • File absent: this is a Critical finding — cash-apply failed to initialize the running log, indicating either an aborted workflow or a skill-integrity failure. The round MUST NOT pass; recommend re-running cash-apply or back-filling the file before the next round.
   • File present with only the initialization comment and no entries: treat as confirmed empty — cash-apply reached the task loop and found nothing requiring a deviation or open-question entry. No finding raised by virtue of emptiness alone.
   • File present with entries:
     • deviation entries are evaluated for whether the divergence is justified. An unjustified deviation is a Critical finding; a justified-but-undocumented-in-design.md deviation is at minimum a Warning recommending the divergence be back-filled into design.md during Fix Actions.
     • open-question entries are surfaced as Warning findings with a recommended ## Fix Actions step naming how to obtain user confirmation before the round can pass.

   The main agent derives the round decision mechanically from the post-filter reviewer findings and does not read this file directly; that round's reviewer findings already incorporate the notes context.

   Idempotence and ingest interaction

   • /cash-ingest may modify tasks.md / design.md / proposal.md. After ingest resolves an open question, the agent MUST append a follow-up entry noting the resolution (do not delete or rewrite the original open-question entry — the historical record is the point).
   • Reviewer treats a resolved open-question entry (i.e. one followed by a resolution entry) as no longer blocking.

9. Final check

   After completing all tasks, re-run:

   spectra instructions apply --change "<name>" --json
   

   Confirm state: "all_done". If not, review remaining tasks and complete them.

10. On completion or pause, show status

Display:

• Tasks completed this session
• Overall progress: "N/M tasks complete"
• If all done: state that tasks are complete; archive guidance is deferred until the cash quality gate passes
• If paused: explain why and wait for guidance

11. Cash-apply response language

For cash-apply, ai 的回覆要用中文.

All user-facing AI responses during this workflow MUST be written in Traditional Chinese unless the user explicitly requests another language.

This includes:

• Status updates while tasks are being implemented.
• Pause messages when a blocker is encountered.
• Review loop summaries.
• Final implementation summaries.

This does not require translating:

• Shell commands.
• File paths.
• Code identifiers.
• Existing quoted source text.

If the user explicitly requests another language later, follow the latest user instruction.

Keep technical names exact even when the surrounding explanation is Chinese.

Do not mix languages for ordinary prose unless a command, path, symbol, or quoted artifact requires it.

The goal is predictable Chinese-facing interaction for cash-apply while preserving exact technical references.

Artifact modifications during cash-apply

When the cash-apply workflow modifies an artifact — during review-loop fix actions, or after /cash-ingest updates tasks.md / design.md / proposal.md — the updated artifact content MUST follow the same Chinese language rule as cash-propose:

• tasks.md, design.md, proposal.md, and other non-spec artifacts under openspec/changes/<change>/: Traditional Chinese.
• Spec files (openspec/changes/<change>/specs/**/spec.md and openspec/specs/**/spec.md): always English, regardless of any other language rule. Delta specs are merged into master specs and must use normative SHALL/MUST wording.

Keep CLI commands, file paths, code identifiers, schema field names, artifact IDs, capability slugs, and existing quoted source text verbatim. If the user explicitly requests another language later, follow the latest user instruction.

Archive guidance timing

Do not suggest archive before the Sub-Agent Review/Rating/Fix Loop has ended with decision: passed.

• If the final round decision is passed, the final response MAY tell the user they can archive with /cash-archive.
• If the final round decision is aborted, do NOT suggest archive; summarize the unresolved findings and point to the final round file.

12. Sub-Agent Review/Rating/Fix Loop

Run this review/rating/fix loop once per change, after the normal workflow has completed its required artifact or task work.

Entry conditions

• For cash-propose, start this loop only after proposal, design, specs, and tasks artifacts required for apply are complete AND spectra validate "<name>" has passed. If validation fixes are required, complete them before entering this loop.
• For cash-apply, start this loop only after all implementation tasks are complete and tasks.md 全 [x].
• Do not run this loop per artifact or per task; the granularity is per-change.

Pre-round mechanical self-check (main agent, inline)

• Run this self-check inline (grep/read, no sub-agent) before spawning round 1's reviewers, and again whenever a round's fix actions modified any artifact (or, for cash-apply, any implementation file) — before spawning the next round's reviewers. Reviewer rounds are expensive; these defects are machine-catchable and MUST be caught here, not by reviewers.
• Checks:
  • Comment/annotation lint: in every spec delta file, <!-- and --> counts MUST match; no unclosed annotation block (e.g. a dangling <!-- @trace line) and no stray --- separator may remain inside a requirement or scenario section.
  • Count-consistency scan: every numeric claim one artifact makes about another (e.g. proposal or design stating a scenario, requirement, or task count) MUST match the actual count in the referenced artifact. Recount at the source and update stale numbers.
  • Identifier cross-grep: for each function name, entry point, file path, flag, or artifact ID that design.md defines, grep ALL artifacts (and for cash-apply, the changed files) and verify every occurrence is consistent in spelling and meaning.
  • Signal-derived checks:
    1. For EVERY open signal whose frontmatter contains a check field, execute the check value from the project root by passing it as the single command-string argument to sh -c, without applying relevance filtering. Executing a check command MUST NOT modify any file. Exit 0 means the check passed. Exit 1 means the anti-pattern is present: inspect any project-root-relative paths printed by the check command and compare them with this change's artifacts and, for cash-apply, changed files. If at least one printed path is in that artifact/source file set, treat the failure as in scope. If the check command prints no usable project-root-relative path, or the output cannot be reliably mapped to a project-root-relative path, fail closed and treat the detected instance as in scope unless the already-read repository state proves the instance is pre-existing or the required fix location is outside the structured scope declarations. If the detected instance is in scope and the fix location is not a protected grader path that is not covered by the structured-scope exception, fix it before spawning reviewers. If the detected instance is pre-existing, or its fix lies outside this change's structured scope declarations, or its fix lies inside a protected grader path that is not covered by the structured-scope exception, do not fix it, record one 範圍外 check 失敗 note in that round file's ## Fix Actions, include the failing check result in the reviewers' context, and proceed to spawn reviewers. Any other exit code is an execution error: fall back to the existing best-effort judgment for that signal and record one fallback note in ## Fix Actions. These note lines coexist with None; pass condition met. and do not count toward ledger fixed_files.
    2. For open signals without a check field, or signals whose check execution fell back because of an execution error, keep the existing best-effort behavior: if any relevant signal (see "Signals in reviewer context" below) describes a machine-checkable anti-pattern, run a corresponding check for it.
• Fix every failure before spawning the reviewers. When the self-check runs after a round's fix actions, record what it caught and fixed in that round's ## Fix Actions; self-check results are NOT reviewer findings and never feed the round decision.

Graded convergence and micro-verification round

• Run max 6 rounds per loop run.
• The first round of each loop run MUST be a full round. When a round ends with decision: next_round, derive the next round type from its position within the current run: the next round MUST be full if and only if it is the fourth round of the current run; otherwise it MUST be micro.
• Consecutive micro rounds are valid. Micro rounds count toward the 6-round cap. Fix actions that modify behavior or a design statement do not change the position-derived round type; the fourth-round checkpoint is the only full re-scan after the run's first round.
• Except in an unseeded run's first round, every reviewer finding classified Critical or Warning MUST include disposition: one of unresolved-prior, fix-introduced, or new.
  • unresolved-prior: the finding matches a blocking finding from any prior round of this loop, including a bucket-1 seed from a prior run. A re-report is evidence that any recorded fix was ineffective.
  • fix-introduced: the finding cites one or more recorded fix actions that introduced the defect. Reviewer V and cash-propose reviewers MUST include the fix-action reference; cash-apply Reviewer B also follows the introduced_by rule below.
  • new: the finding matches no prior blocking finding. A finding that matches only a prior non-blocking triage note remains new; record only a one-line cross-reference to the original triage note, not a duplicate triage note or signal.
• Disposition matching uses the same artifact or file and the same defect mechanism; line ranges are advisory. If deduplicated findings disagree, a blocking disposition (unresolved-prior or fix-introduced) wins over new.
• Before accepting a new tag, the main agent MUST inspect whether the finding is at a fix-touched location from this loop or, for a seeded re-run, the prior run. If the defect stems from those fix actions, correct it to fix-introduced and record the original tag, corrected tag, and evidence in ## Fix Actions. Record every disposition correction; list blocking-to-non-blocking corrections in the completion output.
• A surviving Critical or Warning finding is blocking if and only if its verified disposition is unresolved-prior or fix-introduced. In a run's first round, every surviving Critical and Warning is blocking; a seeded re-run's first round instead uses the seeded cumulative blocking set.
• A finding whose latest state is a non-blocking triage note MUST NOT become blocking again merely because it is re-reported. The only exception is new evidence tying it to recorded fix actions, which returns it as fix-introduced with a traced correction.
• Every surviving new finding is non-blocking. Record it as a triage note in ## Fix Actions, include it in the signals write step, and list it prominently in the completion output. For a non-blocking Critical, also recommend a follow-up change proposal.
• Maintain a cumulative blocking set across the run. Every blocking finding enters the set in the round it is found. A member remains in the set even when a reviewer does not re-report it and leaves only through:
  1. verified resolution — a fix is recorded and a later reviewer confirms the fixed location is resolved without re-reporting the finding; or
  2. accepted risk — the member matches a user-consented accepted-risks entry.
• Reviewer V, both fourth-round checkpoint reviewers, and both seeded re-run first-round reviewers MUST return an explicit resolved/unresolved verdict per member. If checkpoint reviewers disagree, any unresolved verdict keeps the member in the set. Record every verified-resolution removal with the member, fix reference, and verifying reviewer. Record every accepted-risk removal with the member and accepted-risk reference as a downgrade trace.
• If all members are withheld under grader protection and no consented accepted-risk exit is obtainable, stop before spawning another reviewer and end with decision: aborted plus Abort triage. If this becomes true during the fix phase, override the pending next_round decision with aborted in the current not-yet-finalized round file.
• Round files for completed rounds are immutable during an active loop; completed round files are immutable gate inputs. Write fix records, triage notes, downgrade traces, and corrections only in the round where they occur.
• Except in an unseeded run's first round, pass if and only if the post-filter cumulative blocking set contains no blocking Critical and no blocking Warning. Non-blocking findings do not cause next_round.
• If the sixth round does not pass, record decision: aborted, perform Abort triage, and end the workflow.

Fresh sub-agent calls

• Full rounds occur only at the run's first round and, when still needed, its fourth-round checkpoint. Each full round MUST spawn exactly TWO fresh reviewer sub-agents in parallel in one message:
  • Reviewer A — Adherence: checks that the artifacts (and for cash-apply, the implementation diff) match the prior artifacts. For cash-propose: proposal ↔ design ↔ spec ↔ tasks internal consistency, scope coverage, and acceptance criteria completeness. For cash-apply: implementation matches design.md Implementation Contract, tasks.md task descriptions, and spec.md requirements; implementation-notes.md deviations are justified.
  • Reviewer B — Quality: scans for bugs, regressions, missing tests, security sharp edges, and risks NOT directly named in the artifacts. For cash-propose: missing risks, unstated assumptions, scope gaps. For cash-apply: logic bugs, error-handling gaps at real boundaries, untested edge cases from spec ##### Example: blocks.
• Each micro round MUST spawn exactly ONE fresh sub-agent:
  • Reviewer V — Verification: performs delta verification against the cumulative blocking set and recorded fixes. Reviewer V MUST return an explicit resolved/unresolved verdict per member, check fix propagation, and report defects introduced by fixes.
• A pre-spawn short-circuit round uses round_type: full and spawns no reviewer; this is the explicit exception for a seeded re-run where all members are withheld under grader protection and no consented exit exists.
• Full-round reviewers receive identical context and return findings independently. Do not pass Reviewer A output into Reviewer B or vice versa.
• Every reviewer after the run's first round receives every prior round file, the current cumulative blocking set, the artifact paths, the changed-file list for cash-apply, accepted-risks.md when present, and relevant open signals. In a seeded re-run, include prior-run round files too.
• Round context extract fallback: when every prior round file cannot fit practical context, provide one extract per round containing all surviving findings and the complete ## Fix Actions; record in the current round's ## Fix Actions which rounds used extracts.
• Signals in reviewer context: before spawning a round's reviewer(s), read openspec/signals/ entries whose frontmatter status is open, select relevant issue classes, and include them in every reviewer context. This is read-only; continue silently when none exist.
• Run-first-round claim verification (Reviewer A): in the first round of every run, including a re-run, Reviewer A MUST verify code-facing claims in design.md against actual call sites and code before its other checks. A claim that does not hold is a finding.
• After reviewers complete, aggregate findings by location + summary. When full-round reviewers independently raise the same finding with different layer values, the merged finding MUST take layer == design; when they disagree on a seeded member's verdict, any unresolved verdict wins.
• Reviewer roles are independent calls. Do not perform review inline, reuse a reviewer, or invoke a scoring sub-agent.

Accepted-risks ledger

• The optional ledger path is openspec/changes/<change>/reviews/accepted-risks.md.
• Every entry records severity, location, defect mechanism, acceptance rationale, and date.
• Create, modify, or delete an entry only after explicit user consent in the current session. The loop MUST NOT edit this gate input as a fix action. If interaction is unavailable, do not write the entry and keep the finding surviving. A write failure prints a warning and does not fail the workflow.
• When the file exists, include it in every reviewer context and re-evaluate both findings and cumulative-set members against it every round.
• A finding that matches the same artifact or file and the same defect mechanism MUST be reduced to confidence ≤ 25; line ranges are advisory. The same subsystem alone MUST NOT trigger the downgrade.
• Record every accepted-risks downgrade in ## Fix Actions, naming the finding and matched entry, and list all such downgrades in the completion output.

Reviewer output requirements

• All reviewers classify findings as Critical, Warning, or Suggestion.
• Every finding includes:
  • severity: Critical, Warning, or Suggestion
  • confidence: integer 0–100
  • layer: design or text
  • location: artifact + section, or file path + line range
  • summary: one-line issue description
  • recommendation: concrete resolution
  • disposition: unresolved-prior, fix-introduced, or new after the run's first round, and in a seeded re-run's first round
• Every fix-introduced finding MUST include introduced_by, citing one or more recorded fix actions that introduced the defect.
• Classify a finding as text only for synchronization-only wording, count, spelling, or identifier consistency that changes no behavior or design statement. Otherwise use design. When a reviewer cannot decide between design and text, it MUST classify the finding as design.
• cash-apply introduced-by evidence: in cash-apply, every Reviewer B Critical or Warning finding MUST include introduced_by, citing a concrete change-diff location, one or more fix-action records, or all fix actions from a named round when their interaction caused the regression. This rule does not apply to cash-propose.
• Every finding names the artifact, section, source path, or changed file it applies to. Proposal-level scope errors may abort instead of entering fixes.

Confidence scoring rubric (per finding)

• 0 — Not confident at all. False positive or pre-existing issue. SHOULD NOT be reported.
• 25 — Somewhat confident. Could be real but was not verified.
• 50 — Moderately confident. Verified but minor, unlikely, or outside changed scope.
• 75 — Highly confident. Verified and likely to occur, without direct artifact proof.
• 100 — Certain. Direct evidence or a cited SHALL, Implementation Contract item, task line, or proposal non-goal proves the violation.
• Direct artifact-requirement violations MUST score 100, except the accepted-risks and cash-apply introduced-by downgrades below take precedence.

Confidence filter (applied by main agent before the decision)

• Re-check every text finding; if its fix can affect behavior or design, reclassify it to design. The main agent MUST NOT reclassify a design finding to text.
• For an accepted-risks match, set confidence ≤ 25 and record the downgrade trace.
• In cash-apply, a Reviewer B Critical or Warning finding without verifiable introduced_by evidence MUST be reduced to confidence ≤ 25. Record the finding and unverifiable reason in ## Fix Actions, and list every such downgrade in the completion output.
• Drop findings with confidence < 50; their required downgrade traces remain in ## Fix Actions.
• Downgrade findings with confidence ∈ [50, 80) to Suggestion.
• Only findings with confidence ≥ 80 remain Critical or Warning.
• Verify each disposition after filtering, then update the cumulative blocking set. Only that set feeds the decision after the first round.
• critical_gap is true if and only if the post-filter cumulative blocking set contains a Critical; the first round uses its surviving Criticals unless it is seeded.

Common false positives — do NOT flag The following SHOULD NOT be reported, or if reported MUST be scored ≤ 25:

• Pre-existing issues on lines not modified by this change (cash-apply) or content not introduced by this proposal (cash-propose).
• Issues a linter, typechecker, formatter, or compiler would catch (missing imports, type errors, formatting, broken syntax). CI will fail separately; the review loop is not the right channel.
• Pedantic style nitpicks that a senior engineer would not call out in review.
• "Missing test coverage" complaints unless tasks.md or design.md explicitly required the test, or a spec ##### Example: block is not exercised.
• Issues already documented as intentional in design.md, implementation-notes.md, the proposal's Non-Goals section, or ## Alternatives Considered.
• Intentional behavior changes that align with the proposal's ## What Changes or ## Proposed Solution.
• Suggestions to add abstractions, configurability, or defensive error handling that the spec/contract did not require — these conflict with Simplicity First.
• Suggestions to refactor unrelated code touched only incidentally — these conflict with Surgical Changes.

Failure handling

• If a reviewer returns no response or malformed output, retry once with a fresh sub-agent invocation for the reviewer role.
• If both full-round parallel reviewers fail in the same round, treat it as a single role failure (the reviewer role); retry once.
• If the same role fails two consecutive times in a single round, abort the entire cash workflow.
• On abort from sub-agent failure, write the current round file with decision: aborted and include the failure note in ## Decision.
• Do not mark a malformed or failed round as passed, and do not continue to the next round after two consecutive failures.

Decision record requirements

• Record the post-filter cumulative blocking set's Critical count and Warning count. In an unseeded run's first round, use all surviving Critical and Warning findings because all are blocking.
• Record the non-blocking triaged finding count.
• Record critical_gap as true or false; it is true only when the post-filter cumulative blocking set contains a Critical.
• The main agent records round_type as exactly full or micro.
• The main agent records one concise rationale paragraph explaining why the round is passed, next_round, or aborted.
• The decision follows only from the post-filter cumulative blocking set; do not pass a round that retains a blocking Critical or blocking Warning. Non-blocking findings are triaged and do not block pass.

Round file path

• Create the reviews directory if needed: openspec/changes/<change>/reviews/.
• For cash-propose, write openspec/changes/<change>/reviews/propose-r<N>.md.
• For cash-apply, write openspec/changes/<change>/reviews/apply-r<N>.md.
• On a first run, use <N> as the 1-based round number. On a re-run after abort, continue numbering after the highest existing round file for that skill; never overwrite a completed round file.
• The generic path pattern is openspec/changes/<change>/reviews/<skill>-r<N>.md.

Round file schema

• # Cash Propose Review — Round <N> or # Cash Apply Review — Round <N>
• ## Reviewer Findings — list aggregated, post-filter findings grouped under Critical / Warning / Suggestion. Each entry includes severity, confidence, layer, location, summary, recommendation, reviewer source, and where required disposition and introduced_by.
• ## Rating — post-filter cumulative blocking set Critical count, post-filter cumulative blocking set Warning count, non-blocking triaged finding count, critical_gap, round_type, and rationale.
• ## Fix Actions
• ## Decision — value MUST be exactly one of passed, next_round, or aborted.

Fix actions

• If the decision is next_round, address every surviving finding and every cumulative-set carryover before spawning the next round.
• Fix propagation: fixes are the primary source of new defects. For EVERY concept a fix touches (an identifier, a count, a heading, a rule), grep that concept across ALL artifacts (and for cash-apply, the changed files) and synchronize every occurrence in the same fix pass — never fix only the flagged location.
• After completing all fix actions, re-run the pre-round mechanical self-check and fix any failures before spawning the next round's reviewers.
• Record modified files and the reason for each fix in ## Fix Actions.
• Re-run relevant CLI checks or tests before the next round when fixes affect generated artifacts or implementation code.
• For cash-propose, if any fix action modifies proposal, design, tasks, or spec artifacts, run spectra validate "<name>" again and fix validation errors before starting the next round.
• If no fixes are needed because the round passed, write None; pass condition met.
• Fix-loop design circuit breaker: cash-apply only. If resolving a surviving finding requires a synchronization primitive, identity/generation type, or state machine not defined in design.md, do not implement it. Record a needs-design note naming the finding, required mechanism, and reason; set decision: aborted; run Abort triage; and direct the user to /cash-ingest. In cash-propose, defining the mechanism in its own design.md is a normal fix and does not trigger this rule.
• Review round action obligation: before a next_round, every surviving finding and every cumulative-set member counted in the decision MUST have an action in the current ## Fix Actions.
  • A blocking finding/member MUST have exactly one of these three blocking actions: a fix naming modified files, a grader-protection note, or a user-consented accepted-risks entry. A triage note is not a valid action for a blocking member.
  • A non-blocking new finding uses its triage note. A re-report of a prior triage finding uses a one-line cross-reference to the original note and creates no duplicate signal.
  • A needs-design note forces aborted and cannot coexist with next_round.
  • Do not spawn the next reviewer while any required action is missing.

Abort triage

• When aborting because of the round cap, the design circuit breaker, or a fully grader-protected short-circuit, classify every unresolved finding into exactly one bucket and record the same triage in the final round's ## Fix Actions and completion output:
  • bucket 1 — remains this change's obligation: every cumulative blocking set member not accepted with consent. It seeds a later re-run.
  • bucket 2 — a newly discovered issue that was never blocking: write it through the signals step; for Critical, recommend a follow-up change proposal. Never place a previously blocking finding here.
  • bucket 3 — accepted trade-off: write it to accepted-risks.md only with explicit consent. Without consent, move it to bucket 1 and note that accepted-risks recording awaits consent.
• Do not recommend re-running unchanged. State the concrete prerequisite: fix bucket 1, obtain bucket-3 consent, or update design/scope.
• A re-run MUST continue numbering after the highest existing round file, include every prior round file or the extract fallback, seed the cumulative blocking set from the prior run's bucket-1 findings, and apply the cumulative-set pass condition in its first full round. Its first-round reviewers return an explicit resolved/unresolved verdict per member.
• The 6-round cap and round type use positions within the new run, independent of global round-file numbers.
• If a seeded re-run starts while all members are withheld under grader protection and no consented exit exists, short-circuit before reviewers: write one continued-number round file with no reviewer findings, round_type: full, decision: aborted, and triage; append one ledger row. The pre-spawn short-circuit round uses round_type: full and spawns no reviewer. The completion output MUST direct the user to obtain consent for the protected members or expand the structured scope declarations via /cash-ingest before any further re-run.
• Consecutive sub-agent failure aborts and proposal-level scope-error aborts are exempt from this triage.

Grader immutability

• During an active cash review loop, the main agent MUST NOT modify, whether as a fix action or as a mechanical self-check fix, any file in this protected grader path set unless that file is explicitly named in the current change's proposal ## Impact section or in its tasks.md:
  • .claude/skills/cash-propose/SKILL.md
  • .claude/skills/cash-apply/SKILL.md
  • .agents/skills/cash-propose/SKILL.md
  • .agents/skills/cash-apply/SKILL.md
  • .spectra.yaml
  • scripts/cash-skills/tests/skill-checks.fish
  • openspec/specs/
• Structured scope declarations: A file counts as explicitly named only when its project-root-relative path appears in a structured scope declaration: an affected-code entry in proposal ## Impact, or a tasks.md path that is explicitly identified as a delivery target. A path that appears only in a verification command, a rule description, an example, a review finding, reviewer context, or other incidental prose MUST NOT count as a structured scope declaration. Naming a directory path in a structured scope declaration names every file under it.
• A loop already in progress continues under the instruction version it started with; regenerated instructions take effect only from the next loop run.
• The main agent MUST NOT add, modify, or remove the check frontmatter field of any signal under openspec/signals/, regardless of declared scope. The check field is grader input for the pre-round mechanical self-check.
• If fixing a surviving finding would require modifying a protected file outside the structured scope declarations, or touching any signal's check field, do not make that modification. Record 未修復：裁判面保護 (an unfixed-due-to-grader-protection note) in ## Fix Actions, naming the protected file and finding. The finding remains surviving for the round decision. This is the explicit exception to the obligations to fix Critical/Warning findings before the next round in the cash-propose quality gate and cash-apply quality gate requirements: fixes are required except any finding withheld under the grader-immutability rule.
• A protected file modified under the declared-scope exception does not alter the position-derived next round type. If the loop reaches round 6 without passing because protected findings remain, write decision: aborted under the existing round-limit rule.
• The cash workflow completion output MUST list every 未修復：裁判面保護 record from every round, even if a later round passes: for cash-propose with decision: passed, list the records in the final summary; for cash-apply with decision: passed, list the records in the gate-complete final response; for any decision: aborted, list the records in the unresolved-findings warning.

Loop ledger step

• After each round file is finalized, append exactly one row to openspec/changes/<change>/reviews/loop-ledger.tsv. For a next_round round, append immediately before spawning the next round's reviewers, after all fix actions, post-fix self-check records, and validation re-run fix records have been written. For a final passed or aborted round, append at loop end before the signals write step.
• If loop-ledger.tsv does not exist, create it first with this exact tab-separated header row: skill round round_type criticals warnings decision fixed_files.
• Append data rows with exactly seven tab-separated fields in this order:
  • skill: propose or apply
  • round: 1-based round number
  • round_type: full or micro
  • criticals: post-filter cumulative blocking set Critical count; in an unseeded first round, all surviving Criticals; 0 when empty, including failure-aborted rounds
  • warnings: post-filter cumulative blocking set Warning count; in an unseeded first round, all surviving Warnings; 0 when empty, including failure-aborted rounds
  • decision: passed, next_round, or aborted
  • fixed_files: number of distinct files recorded as modified in that round's ## Fix Actions; use 0 when none are recorded, and do not count fallback, triage, downgrade-trace, disposition-correction, or grader-protection notes
• The ledger is an append-only event log. Rows from propose loops, apply loops, and later re-runs after an abort accumulate chronologically in the same file. (skill, round) is not a unique key; duplicate round numbers from re-runs are valid.
• Round files remain authoritative. If a round file and ledger disagree, trust the round file.
• If writing the ledger fails, print a warning and continue the cash workflow unchanged.

Round file language

• The Round file (openspec/changes/<change>/reviews/<skill>-r<N>.md) prose content — Reviewer Findings, Rating rationale, Fix Actions descriptions, and the ## Decision explanation — MUST be written in Traditional Chinese.
• Keep the following verbatim (do not translate):
  • Section headings: # Cash Propose Review — Round <N>, # Cash Apply Review — Round <N>, ## Reviewer Findings, ## Rating, ## Fix Actions, ## Decision.
  • The decision value: one of passed, next_round, aborted.
  • Field names and their values: critical_gap (true / false), round_type (full / micro), severity, confidence, layer (design / text), disposition (unresolved-prior / fix-introduced / new), introduced_by, location, summary, recommendation.
  • Direct quotations from spec delta, master spec, or any other English-language artifact.
  • CLI commands, file paths, code identifiers, artifact IDs, capability slugs.
• This rule applies to both cash-propose and cash-apply round files because they share this review-loop template.
• If the user explicitly requests another language later, follow the latest user instruction.

Signals write step

• When it runs: Run this step only after the review loop has ENDED — that is, the final round file's decision is passed or aborted — and the mechanical decision has already been recorded. This step MUST run only after that decision is recorded, and it MUST NOT change the decision of any round file. It applies to both cash-propose and cash-apply, since this template is shared.
• Target set: The target set is every finding that, in ANY single round of THIS change's loop, survived the confidence filter classified as Critical or Warning. Cover findings from every round, not only the final round — a finding that was caught and fixed in an early round of an otherwise-passing loop still produces a signal. Deduplicate the target set by issue class, so an issue class seen across multiple rounds is processed exactly once. This issue-class deduplication is INDEPENDENT of any per-round location + summary aggregation deduplication used elsewhere in the loop. Findings classified Suggestion, and any finding with confidence < 80, MUST NOT produce a signal.
• Matching rubric: For each deduplicated finding class, read the existing signals under openspec/signals/ and judge issue-class match by: SAME capability or domain AND SAME underlying rule or anti-pattern. Differing free-text wording alone does NOT make a different class; a different root cause DOES make a different class. When uncertain, PREFER creating a new signal over merging into an existing one.
• On match to an existing open signal: Reuse that signal's slug and update it in place — increment occurrences, update last_seen to today (YYYY-MM-DD), append one ## Occurrences entry (date, change name, source skill + round, and a one-line context), and append the source round file path to links. Do NOT change its status. Do NOT add, modify, or remove its check field; preserve any existing human-authored check byte-for-byte.
• On no open match (including when only an addressed or dismissed signal matches): Create a NEW signal. Before coining the <slug>, list the existing openspec/signals/*.md files and choose a <slug> that does NOT already exist. The slug is a short semantic ASCII kebab-case issue-class identifier matching ^[a-z0-9]+(-[a-z0-9]+)*$ (e.g. spec-requirement-no-backing-task); it is NOT a mechanical transform of location + summary. If the natural slug is already taken, disambiguate with a suffix. Creating a signal MUST NOT overwrite any existing signal file and MUST NOT change any existing signal's human-maintained status. The new signal has status: open, occurrences: 1, and first_seen = last_seen = today.
• Signal file schema: Each signal file has frontmatter with id (= slug), type (default recurring-finding for review-loop-written signals), status, occurrences, first_seen, last_seen, links, and optional human-authored check; followed by a title, a description paragraph, and a ## Occurrences section. New signals created by this step MUST NOT contain an automatically authored check.
• Failure handling: If writing under openspec/signals/ fails, print a warning but do NOT fail the cash workflow — signals are an auxiliary layer. If there are no qualifying findings, write nothing.

Output During Implementation

## Implementing: <change-name> (schema: <schema-name>)

Working on task 3/7: <task description>
[...implementation happening...]
✓ Task complete

Working on task 4/7: <task description>
[...implementation happening...]
✓ Task complete

Output On Completion

## Implementation Complete

**Change:** <change-name>
**Schema:** <schema-name>
**Progress:** 7/7 tasks complete ✓

### Completed This Session
- [x] Task 1
- [x] Task 2
...

All tasks complete. The cash quality gate runs next; archive guidance is shown only if it passes.

Output On Pause (Issue Encountered)

## Implementation Paused

**Change:** <change-name>
**Schema:** <schema-name>
**Progress:** 4/7 tasks complete

### Issue Encountered
<description of the issue>

**Options:**
1. <option 1>
2. <option 2>
3. Other approach

What would you like to do?

Guardrails

• Keep going through tasks until done or blocked
• Always read context files before starting (from the apply instructions output)
• If task is ambiguous, pause and ask before implementing
• If implementation reveals issues, pause and suggest artifact updates
• Keep code changes minimal and scoped to each task
• Update task checkbox immediately after completing each task
• Pause on errors, blockers, or unclear requirements - don't guess
• Use contextFiles from CLI output, don't assume specific file names
• No external task tracking — do not use any built-in task management, todo list, or progress tracking tool; the tasks file is the only system
• If AskUserQuestion tool is not available, ask the same questions as plain text and wait for the user's response

Fluid Workflow Integration

This skill supports the "actions on a change" model:

• Can be invoked anytime: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
• Allows artifact updates: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly