name	review-proposal
description	Review a Compound governance proposal using the verification checklist
disable-model-invocation	true
argument-hint	<proposal-id>

Review Compound governance proposal $ARGUMENTS following this verification guide.

Compound Governance Proposal Review Guide

This guide outlines the verification steps to assess the security and correctness of a Compound governance proposal.

Important Instructions

Output Requirements

You MUST write the review to a markdown file: reviews/proposal-$ARGUMENTS.md

The review file should follow the output template in Section 14.

Decoder Modifications

You are allowed and encouraged to modify the proposal decoder (packages/decoder/src/) during the review if needed to:

Fix bugs in decoding logic
Add support for new function signatures
Improve output formatting or clarity
Add new chain or contract support

If you modify the decoder, note the changes in your review under a "Decoder Updates" section.

Finding Severity Definitions

Use these severity levels when documenting findings:

Severity	Criteria	Examples
CRITICAL	Proposal will fail, funds at risk, or enables governance attack	Wrong recipient address, insufficient balance, bridge paused
HIGH	Incorrect parameters with significant financial impact	Wrong supply cap (off by 10x), incorrect interest rate
MEDIUM	Minor parameter mismatches or suboptimal values	Small discrepancy from forum, non-standard gas limit
LOW	Cosmetic issues, non-standard patterns	Unusual ordering of actions, redundant approvals
INFO	Observations, no action required	First use of a new bridge route, large but correct transfer

1. Decode the Proposal

First, decode the proposal calldata to understand what actions it performs:

pnpm decode $ARGUMENTS

Identify:

Number of actions
Target contracts
Function calls and parameters
Values being transferred

2. Forum Discussion Comparison (Ground Truth)

CRITICAL STEP: Before detailed verification, fetch the forum discussion link from Tally and compare decoded values against the forum's "ground truth" values.

Finding the Forum Link

Visit the Tally proposal page: https://www.tally.xyz/gov/compound/proposal/$ARGUMENTS
Look for the forum discussion link (usually on comp.xyz)
The forum post contains the intended values from the proposal author (e.g., Gauntlet, OpenZeppelin)

Comparison Checklist

For each parameter change in the proposal, verify against forum values:

Parameter Type	What to Check
Supply Caps	Old → New values match forum exactly
Collateral Factors	Percentage changes match forum
Liquidation Factors	Percentage changes match forum
Interest Rate Curves	Base, Slope Low, Kink, Slope High match forum
Price Feeds	New addresses match forum (if specified)
Token Amounts	Transfer amounts match forum budget

Documenting Mismatches

Create a comparison table in your review:

| Parameter | Forum Value | Decoded Value | Status |
|-----------|-------------|---------------|--------|
| USDC Supply Cap | 500,000 → 0 | 500.00K → 0 | ✓ MATCH |
| Borrow Kink | 90% → 85% | 85% (unchanged) | ⚠️ NOTE |
| Transfer Amount | 10,000 COMP | 9,500 COMP | **CRITICAL MISMATCH** |

CRITICAL: If decoded values don't match forum values:

Mark the mismatch prominently in the review
Investigate whether the discrepancy is:
- A previous proposal already applied the change (decoder shows "unchanged")
- An error in the proposal encoding
- An intentional deviation from the forum post
Request clarification from the proposal author if unresolved

3. Address Verification

Do not trust Etherscan labels alone - they are user-submitted and not authoritative proof.

Authoritative Sources

Contract Type	Where to Verify
Compound V2 contracts (Comptroller, Timelock, COMP)	compound-protocol/networks/mainnet.json
Compound III contracts (Comet, CometRewards, Configurator)	comet/deployments/{chain}/{market}/roots.json
OP Stack bridges (Base, Optimism)	Base Docs or Optimism Docs
Bridged tokens	On-chain: query `REMOTE_TOKEN()` or `l1Token()` to verify L1 counterpart

On-Chain Verification

Always verify relationships on-chain:

# Verify Timelock is admin of Comptroller
cast call <COMPTROLLER> "admin()(address)"

# Verify COMP token address from Comptroller
cast call <COMPTROLLER> "getCompAddress()(address)"

# Verify bridged token links to correct L1 token
cast call <L2_TOKEN> "REMOTE_TOKEN()(address)" --rpc-url <L2_RPC>

# Verify CometRewards is configured with correct reward token
cast call <COMET_REWARDS> "rewardConfig(address)" <COMET_ADDRESS> --rpc-url <L2_RPC>

# Verify Governor points to correct Timelock
cast call <GOVERNOR> "timelock()(address)"

4. Execution Feasibility Checks

Verify the proposal will not revert during execution.

Token Balances & Allowances

# Check source has sufficient balance
cast call <TOKEN> "balanceOf(address)(uint256)" <SOURCE_ADDRESS>

# Check current allowances (should be 0 or sufficient)
cast call <TOKEN> "allowance(address,address)(uint256)" <OWNER> <SPENDER>

Contract State

# Check if bridges are paused
cast call <L1_STANDARD_BRIDGE> "paused()(bool)"
cast call <OPTIMISM_PORTAL> "paused()(bool)"

# Check if bridge route has been used before (proves it works)
cast call <L1_STANDARD_BRIDGE> "deposits(address,address)(uint256)" <L1_TOKEN> <L2_TOKEN>

Function-Specific Checks

For _grantComp:

Comptroller must have sufficient COMP balance
Caller must be admin (Timelock via governance)

For approve:

Generally cannot fail unless token has special restrictions

For depositERC20To (bridge):

Bridge and portal must not be paused
Token pair must be registered (check deposits mapping or previous transactions)
_minGasLimit should be adequate (200,000 is standard for ERC20 deposits)

5. Parameter Validation

Amount Consistency

Verify amounts are consistent across related actions:

Grant amount = Approve amount = Bridge amount (for bridge proposals)

Bridge Parameters

Parameter	Expected Value	Notes
`_minGasLimit`	200,000	Optimism recommended
`_extraData`	`0x`	Usually empty

Addresses

_l1Token must match the token being approved
_l2Token must be the correct bridged representation (verify with REMOTE_TOKEN())
_to must be the intended recipient (e.g., CometRewards contract)

6. Governor & Voting Verification

Governor Legitimacy

# Verify Governor is active and legitimate
cast call <GOVERNOR> "proposalCount()(uint256)"

# Verify Governor's Timelock matches protocol Timelock
cast call <GOVERNOR> "timelock()(address)"

Quorum & Voting Feasibility

# Check quorum requirement
cast call 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0 "quorumVotes()(uint256)" --rpc-url https://ethereum-rpc.publicnode.com

# Check proposal state and votes
cast call 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0 "proposals(uint256)((uint256,address,uint256,uint256,uint256,uint256,uint256,uint256,bool,bool))" $ARGUMENTS --rpc-url https://ethereum-rpc.publicnode.com

7. Proxy Upgrade Verification

For proposals that upgrade contract implementations (_setImplementation, upgradeTo, upgradeAndCall):

Pre-Upgrade Checks

# Get current implementation
cast call <PROXY> "implementation()(address)" --rpc-url https://ethereum-rpc.publicnode.com

# Verify new implementation is verified on Etherscan
# Check: https://etherscan.io/address/<NEW_IMPL>#code

Verification Checklist

Check	Status
New implementation is verified on Etherscan
Storage layout is compatible (no slot collisions)
Initializer cannot be called again (or is intentionally callable)
New implementation has been audited
Upgrade path has been tested

Storage Layout Comparison

If the proposal upgrades a proxy, compare storage layouts between old and new implementations to ensure no collisions.

8. Current State Analysis

Check the current state to understand the proposal's impact:

# For rewards top-ups: check current rewards balance
cast call <REWARD_TOKEN> "balanceOf(address)(uint256)" <REWARDS_CONTRACT> --rpc-url <L2_RPC>

9. Potential Failure Conditions Checklist

Condition	How to Check	Risk
Insufficient token balance	`balanceOf()` on source	Transaction reverts
Unauthorized caller	Verify execution path through governance	Transaction reverts
Bridge paused	`paused()` on bridge contracts	Transaction reverts
Token not bridgeable	Check `deposits()` mapping or history	Transaction reverts
Insufficient gas limit	Compare to recommended values	L2 finalization fails, funds stuck
Wrong token addresses	Verify with `REMOTE_TOKEN()`	Funds sent to wrong destination

10. DoS / Execution Prevention Analysis

Analyze vectors that could prevent proposal execution between now and when it executes.

Important: Every finding must include its verification source (cast command, URL, or derivation).

Competing Proposals

Check if other pending proposals could drain the same tokens:

# Check states of recent proposals (0=Pending, 1=Active, 2=Canceled, 7=Executed)
for i in {518..525}; do
  echo "Proposal $i: $(cast call 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0 'state(uint256)(uint8)' $i --rpc-url https://ethereum-rpc.publicnode.com)"
done

# Decode pending proposals to check what tokens they use
pnpm decode <PROPOSAL_ID>

Document findings as:

Proposal	State	Asset	Source
522	Pending	USDC	`cast call 0x309a... 'state(uint256)(uint8)' 522`
523	Pending	COMP	`pnpm decode 523`

Balance Buffer Analysis

Calculate the margin between available balance and required amount:

# Check current balance
cast call <TOKEN> "balanceOf(address)(uint256)" <TIMELOCK> --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Metric	Value	Source
Available	133,376 USDC	`cast call 0xA0b8... "balanceOf(address)(uint256)" 0x6d90...`
Required	57,500 USDC	Decoded from proposal Action #0
Buffer	75,876 USDC (132%)	Calculated: Available - Required

Governance Attack Timing

Calculate minimum time for a malicious proposal to execute:

# Get governance parameters
cast call <GOVERNOR> "votingDelay()(uint256)"   # blocks until voting starts
cast call <GOVERNOR> "votingPeriod()(uint256)"  # blocks for voting
cast call <TIMELOCK> "delay()(uint256)"         # seconds in timelock queue

Document findings as:

Phase	Value	Human Readable	Source
Voting Delay	13140 blocks	1.82 days	`cast call 0x309a... "votingDelay()(uint256)"`
Voting Period	19710 blocks	2.73 days	`cast call 0x309a... "votingPeriod()(uint256)"`
Timelock Delay	172800 seconds	2.00 days	`cast call 0x6d90... "delay()(uint256)"`
Total	-	~6.5 days	Calculated: (13140+19710)*12s/86400 + 172800/86400

Existing Allowances

Check if Timelock has token allowances that could be exploited:

# Check allowances to known spenders (bridges, etc.)
cast call <TOKEN> "allowance(address,address)(uint256)" <TIMELOCK> <SPENDER> --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Spender	Allowance	Source
Base L1StandardBridge	0	`cast call 0xA0b8... "allowance(address,address)(uint256)" 0x6d90... 0x3154...`

Target Contract Front-Running

For proposals calling initialize() or similar one-time functions, verify access control:

# Check who can call the function (read source code on Etherscan)
# Example: Streamer.initialize() has onlyStreamCreator modifier

# Verify the authorized caller
cast call <CONTRACT> "streamCreator()(address)" --rpc-url https://ethereum-rpc.publicnode.com

# Check current state
cast call <CONTRACT> "startTimestamp()(uint256)" --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Check	Value	Source
Access Control	`onlyStreamCreator` modifier	Etherscan source
Authorized Caller	Timelock (0x6d90...)	`cast call <CONTRACT> "streamCreator()(address)"`
Current State	Not initialized (startTimestamp=0)	`cast call <CONTRACT> "startTimestamp()(uint256)"`

External Token Risks

For proposals involving centralized stablecoins (USDC, USDT):

# Check if token is paused
cast call <TOKEN> "paused()(bool)" --rpc-url https://ethereum-rpc.publicnode.com

# Check if addresses are blacklisted
cast call <TOKEN> "isBlacklisted(address)(bool)" <ADDRESS> --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Check	Status	Source
USDC Paused	false	`cast call 0xA0b8... "paused()(bool)"`
Timelock Blacklisted	false	`cast call 0xA0b8... "isBlacklisted(address)(bool)" 0x6d90...`

DoS Risk Summary Template

Vector	Risk Level	Mitigation	Verification
Competing proposals	Low/Medium/High	Description	`pnpm decode` + `cast call state()`
Governance attack	Low	X-day detection window	Governance parameter queries
Allowance exploitation	None/Low	Current allowances	`cast call allowance()`
Front-running	None/Low	Access control details	Etherscan source + `cast call`
Token pause/blacklist	External	Current status	`cast call paused()` / `isBlacklisted()`
Balance race	Low/Medium	X% buffer	`cast call balanceOf()`

11. Proposal Simulation

Simulate the proposal execution on a Tenderly virtual testnet to verify it executes successfully end-to-end.

Setup

Create a Tenderly virtual testnet (fork of mainnet)
Configure packages/simulator/proposal.config.json with your Tenderly RPC URL:

{
    "chains": {
        "mainnet": {
            "rpcUrl": "https://virtual.mainnet.eu.rpc.tenderly.co/<YOUR-TESTNET-ID>",
            "chainId": "1",
            "timelockAddress": "0x6d903f6003cca6255D85CcA4D3B5E5146dC33925",
            "governorAddress": "0x309a862bbC1A00e45506cB8A802D1ff10004c8C0"
        }
    }
}

Running the Simulation

# From the monorepo root, simulate a proposal
pnpm simulate $ARGUMENTS

# Simulate with persistence (creates snapshot)
pnpm simulate $ARGUMENTS --persist

# Simulate each action separately (useful for debugging)
pnpm simulate $ARGUMENTS --separately

What the Simulator Does

Syncs state with Tenderly virtual testnet
Delegates COMP to a whale address for voting power
Advances blocks to make proposal active
Casts vote in favor of the proposal
Advances blocks to end voting period
Queues proposal to timelock
Advances time past the timelock delay
Executes the proposal
For L2 bridging proposals, simulates message relay on the target chain

Expected Output

Delegating 300000000000000000000000 COMP to 0x73AF3bcf944a6559933396c1577B257e2054D935...
Delegate transaction sent: 0x...
Syncing state...
Proposal created with ID: 522
Current block number: 24282349
Advancing to 24284235 block to make proposal active...
Casting vote for proposal...
Queueing proposal...
Advancing time by 1209600 seconds...
Executing proposal...
Execution result: 0x...

Interpreting Results

Output	Meaning
`Execution result: 0x...`	Proposal executed successfully
`Skipping target: 0x...`	Target is not a bridge (mainnet-only action)
Error/revert message	Proposal would fail - investigate the cause

Simulation Limitations

Does not simulate actual token bridging (only Compound governance messages)
L2 simulations require separate Tenderly virtual testnets for each chain
Time/block manipulation may not perfectly match mainnet conditions

Document findings as:

Check	Result	Source
Simulation Status	Success	`pnpm simulate $ARGUMENTS`
Execution TX	`0xdc77...`	Tenderly virtual testnet
L2 Bridging	N/A (mainnet-only)	Skipped targets in output

12. Test Report Review

If the proposal includes a test report, verify:

All tests pass (especially chain-specific tests)
Pre and post conditions are checked
Both fast-execute and standard submission paths tested

13. Common Pitfalls

Watch out for these known issues:

Pitfall	Description	How to Detect
Unichain mislabeling	Bridge at `0x81014F44...` shows as "Optimism" in some decoders	Verify via Etherscan
"Unchanged" values	Decoder shows "unchanged" when a prior proposal already applied the change	Check recent executed proposals
Decimal confusion	USDC/USDT have 6 decimals, COMP/WETH have 18	Verify token decimals on-chain
Stale forum posts	Forum post may have been updated after initial posting	Check forum post edit history
Multiple recipients	Bridge proposals may split funds across multiple L2 contracts	Verify all recipients are correct
Gas limit too low	Non-standard `_minGasLimit` for complex L2 operations	Compare to similar past proposals
The required gas exceed tx gas limit	The tx gas limit on Ethereum is 16 mil. No proposal should exceed this.	Check the current tx limit and compare it to the one consumed by the proposal.

14. Review Output Template

Write your review to reviews/proposal-$ARGUMENTS.md using this template:

# Proposal $ARGUMENTS Review

**Date:** YYYY-MM-DD
**Reviewer:** [Name]
**Status:** PENDING REVIEW | APPROVED | APPROVED WITH NOTES | REJECTED

## Summary

- **Proposal Type:** [Parameter Change / Token Transfer / Bridge / Upgrade / Mixed]
- **Risk Level:** [Low / Medium / High / Critical]
- **Actions:** [Number] actions across [Number] chains

[1-2 sentence description of what this proposal does]

## Findings

| # | Severity | Description | Status |
|---|----------|-------------|--------|
| 1 | INFO | Example finding | Verified |

## Forum Comparison

| Parameter | Forum Value | Decoded Value | Status |
|-----------|-------------|---------------|--------|
| ... | ... | ... | ✓ MATCH |

## Address Verification

| Address | Expected | Verified | Source |
|---------|----------|----------|--------|
| ... | ... | ✓ | [Source] |

## Execution Feasibility

| Check | Result | Source |
|-------|--------|--------|
| Token Balance | Sufficient | `cast call ...` |
| Bridge Status | Not Paused | `cast call ...` |

## DoS Risk Analysis

| Vector | Risk Level | Notes |
|--------|------------|-------|
| Competing proposals | Low | No conflicting proposals |

## Simulation Results

| Check | Result |
|-------|--------|
| Mainnet Simulation | Success/Failed |
| L2 Relay | N/A or Success/Failed |

## Decoder Updates

[If you modified the decoder during this review, document changes here]

- None

## Recommendation

**[APPROVE / APPROVE WITH NOTES / REJECT]**

[Explanation of recommendation]

Quick Reference: Common RPC Endpoints

# Ethereum
--rpc-url https://ethereum-rpc.publicnode.com

# Base
--rpc-url https://base-rpc.publicnode.com

# Optimism
--rpc-url https://optimism-rpc.publicnode.com

# Arbitrum
--rpc-url https://arbitrum-one-rpc.publicnode.com

# Polygon
--rpc-url https://polygon-bor-rpc.publicnode.com

# Ronin
--rpc-url https://api.roninchain.com/rpc

# Unichain
--rpc-url https://mainnet.unichain.org

Quick Reference: Common Contract Addresses

Compound V2 (Ethereum)

Comptroller: 0x3d9819210A31b4961b30EF54bE2aeD79B9c9Cd3B
Timelock: 0x6d903f6003cca6255D85CcA4D3B5E5146dC33925
COMP Token: 0xc00e94Cb662C3520282E6f5717214004A7f26888
New Governor: 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0

Base L1 Contracts (on Ethereum)

L1StandardBridge: 0x3154Cf16ccdb4C6d922629664174b904d80F2C35
OptimismPortal: 0x49048044D57e1C92A77f79988d21Fa8fAF74E97e

Optimism L1 Contracts (on Ethereum)

L1StandardBridge: 0x99C9fc46f92E8a1c0deC1b1747d010903E884bE1
OptimismPortal: 0xbEb5Fc579115071764c7423A4f12eDde41f106Ed

Unichain L1 Contracts (on Ethereum)

L1StandardBridge: 0x81014F44b0a345033bB2b3B21C7a1A308B35fEeA

WARNING: The Unichain bridge address (0x81014F44...) is often mislabeled by decoders as "Optimism". Always verify the bridge network via Etherscan labels.

name	review-proposal
description	Review a Compound governance proposal using the verification checklist
disable-model-invocation	true
argument-hint	<proposal-id>

Review Compound governance proposal $ARGUMENTS following this verification guide.

Compound Governance Proposal Review Guide

This guide outlines the verification steps to assess the security and correctness of a Compound governance proposal.

Important Instructions

Output Requirements

You MUST write the review to a markdown file: reviews/proposal-$ARGUMENTS.md

The review file should follow the output template in Section 14.

Decoder Modifications

You are allowed and encouraged to modify the proposal decoder (packages/decoder/src/) during the review if needed to:

Fix bugs in decoding logic
Add support for new function signatures
Improve output formatting or clarity
Add new chain or contract support

If you modify the decoder, note the changes in your review under a "Decoder Updates" section.

Finding Severity Definitions

Use these severity levels when documenting findings:

Severity	Criteria	Examples
CRITICAL	Proposal will fail, funds at risk, or enables governance attack	Wrong recipient address, insufficient balance, bridge paused
HIGH	Incorrect parameters with significant financial impact	Wrong supply cap (off by 10x), incorrect interest rate
MEDIUM	Minor parameter mismatches or suboptimal values	Small discrepancy from forum, non-standard gas limit
LOW	Cosmetic issues, non-standard patterns	Unusual ordering of actions, redundant approvals
INFO	Observations, no action required	First use of a new bridge route, large but correct transfer

1. Decode the Proposal

First, decode the proposal calldata to understand what actions it performs:

pnpm decode $ARGUMENTS

Identify:

Number of actions
Target contracts
Function calls and parameters
Values being transferred

2. Forum Discussion Comparison (Ground Truth)

CRITICAL STEP: Before detailed verification, fetch the forum discussion link from Tally and compare decoded values against the forum's "ground truth" values.

Finding the Forum Link

Visit the Tally proposal page: https://www.tally.xyz/gov/compound/proposal/$ARGUMENTS
Look for the forum discussion link (usually on comp.xyz)
The forum post contains the intended values from the proposal author (e.g., Gauntlet, OpenZeppelin)

Comparison Checklist

For each parameter change in the proposal, verify against forum values:

Parameter Type	What to Check
Supply Caps	Old → New values match forum exactly
Collateral Factors	Percentage changes match forum
Liquidation Factors	Percentage changes match forum
Interest Rate Curves	Base, Slope Low, Kink, Slope High match forum
Price Feeds	New addresses match forum (if specified)
Token Amounts	Transfer amounts match forum budget

Documenting Mismatches

Create a comparison table in your review:

| Parameter | Forum Value | Decoded Value | Status |
|-----------|-------------|---------------|--------|
| USDC Supply Cap | 500,000 → 0 | 500.00K → 0 | ✓ MATCH |
| Borrow Kink | 90% → 85% | 85% (unchanged) | ⚠️ NOTE |
| Transfer Amount | 10,000 COMP | 9,500 COMP | **CRITICAL MISMATCH** |

CRITICAL: If decoded values don't match forum values:

Mark the mismatch prominently in the review
Investigate whether the discrepancy is:
- A previous proposal already applied the change (decoder shows "unchanged")
- An error in the proposal encoding
- An intentional deviation from the forum post
Request clarification from the proposal author if unresolved

3. Address Verification

Do not trust Etherscan labels alone - they are user-submitted and not authoritative proof.

Authoritative Sources

Contract Type	Where to Verify
Compound V2 contracts (Comptroller, Timelock, COMP)	compound-protocol/networks/mainnet.json
Compound III contracts (Comet, CometRewards, Configurator)	comet/deployments/{chain}/{market}/roots.json
OP Stack bridges (Base, Optimism)	Base Docs or Optimism Docs
Bridged tokens	On-chain: query `REMOTE_TOKEN()` or `l1Token()` to verify L1 counterpart

On-Chain Verification

Always verify relationships on-chain:

# Verify Timelock is admin of Comptroller
cast call <COMPTROLLER> "admin()(address)"

# Verify COMP token address from Comptroller
cast call <COMPTROLLER> "getCompAddress()(address)"

# Verify bridged token links to correct L1 token
cast call <L2_TOKEN> "REMOTE_TOKEN()(address)" --rpc-url <L2_RPC>

# Verify CometRewards is configured with correct reward token
cast call <COMET_REWARDS> "rewardConfig(address)" <COMET_ADDRESS> --rpc-url <L2_RPC>

# Verify Governor points to correct Timelock
cast call <GOVERNOR> "timelock()(address)"

4. Execution Feasibility Checks

Verify the proposal will not revert during execution.

Token Balances & Allowances

# Check source has sufficient balance
cast call <TOKEN> "balanceOf(address)(uint256)" <SOURCE_ADDRESS>

# Check current allowances (should be 0 or sufficient)
cast call <TOKEN> "allowance(address,address)(uint256)" <OWNER> <SPENDER>

Contract State

# Check if bridges are paused
cast call <L1_STANDARD_BRIDGE> "paused()(bool)"
cast call <OPTIMISM_PORTAL> "paused()(bool)"

# Check if bridge route has been used before (proves it works)
cast call <L1_STANDARD_BRIDGE> "deposits(address,address)(uint256)" <L1_TOKEN> <L2_TOKEN>

Function-Specific Checks

For _grantComp:

Comptroller must have sufficient COMP balance
Caller must be admin (Timelock via governance)

For approve:

Generally cannot fail unless token has special restrictions

For depositERC20To (bridge):

Bridge and portal must not be paused
Token pair must be registered (check deposits mapping or previous transactions)
_minGasLimit should be adequate (200,000 is standard for ERC20 deposits)

5. Parameter Validation

Amount Consistency

Verify amounts are consistent across related actions:

Grant amount = Approve amount = Bridge amount (for bridge proposals)

Bridge Parameters

Parameter	Expected Value	Notes
`_minGasLimit`	200,000	Optimism recommended
`_extraData`	`0x`	Usually empty

Addresses

_l1Token must match the token being approved
_l2Token must be the correct bridged representation (verify with REMOTE_TOKEN())
_to must be the intended recipient (e.g., CometRewards contract)

6. Governor & Voting Verification

Governor Legitimacy

# Verify Governor is active and legitimate
cast call <GOVERNOR> "proposalCount()(uint256)"

# Verify Governor's Timelock matches protocol Timelock
cast call <GOVERNOR> "timelock()(address)"

Quorum & Voting Feasibility

# Check quorum requirement
cast call 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0 "quorumVotes()(uint256)" --rpc-url https://ethereum-rpc.publicnode.com

# Check proposal state and votes
cast call 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0 "proposals(uint256)((uint256,address,uint256,uint256,uint256,uint256,uint256,uint256,bool,bool))" $ARGUMENTS --rpc-url https://ethereum-rpc.publicnode.com

7. Proxy Upgrade Verification

For proposals that upgrade contract implementations (_setImplementation, upgradeTo, upgradeAndCall):

Pre-Upgrade Checks

# Get current implementation
cast call <PROXY> "implementation()(address)" --rpc-url https://ethereum-rpc.publicnode.com

# Verify new implementation is verified on Etherscan
# Check: https://etherscan.io/address/<NEW_IMPL>#code

Verification Checklist

Check	Status
New implementation is verified on Etherscan
Storage layout is compatible (no slot collisions)
Initializer cannot be called again (or is intentionally callable)
New implementation has been audited
Upgrade path has been tested

Storage Layout Comparison

If the proposal upgrades a proxy, compare storage layouts between old and new implementations to ensure no collisions.

8. Current State Analysis

Check the current state to understand the proposal's impact:

# For rewards top-ups: check current rewards balance
cast call <REWARD_TOKEN> "balanceOf(address)(uint256)" <REWARDS_CONTRACT> --rpc-url <L2_RPC>

9. Potential Failure Conditions Checklist

Condition	How to Check	Risk
Insufficient token balance	`balanceOf()` on source	Transaction reverts
Unauthorized caller	Verify execution path through governance	Transaction reverts
Bridge paused	`paused()` on bridge contracts	Transaction reverts
Token not bridgeable	Check `deposits()` mapping or history	Transaction reverts
Insufficient gas limit	Compare to recommended values	L2 finalization fails, funds stuck
Wrong token addresses	Verify with `REMOTE_TOKEN()`	Funds sent to wrong destination

10. DoS / Execution Prevention Analysis

Analyze vectors that could prevent proposal execution between now and when it executes.

Important: Every finding must include its verification source (cast command, URL, or derivation).

Competing Proposals

Check if other pending proposals could drain the same tokens:

# Check states of recent proposals (0=Pending, 1=Active, 2=Canceled, 7=Executed)
for i in {518..525}; do
  echo "Proposal $i: $(cast call 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0 'state(uint256)(uint8)' $i --rpc-url https://ethereum-rpc.publicnode.com)"
done

# Decode pending proposals to check what tokens they use
pnpm decode <PROPOSAL_ID>

Document findings as:

Proposal	State	Asset	Source
522	Pending	USDC	`cast call 0x309a... 'state(uint256)(uint8)' 522`
523	Pending	COMP	`pnpm decode 523`

Balance Buffer Analysis

Calculate the margin between available balance and required amount:

# Check current balance
cast call <TOKEN> "balanceOf(address)(uint256)" <TIMELOCK> --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Metric	Value	Source
Available	133,376 USDC	`cast call 0xA0b8... "balanceOf(address)(uint256)" 0x6d90...`
Required	57,500 USDC	Decoded from proposal Action #0
Buffer	75,876 USDC (132%)	Calculated: Available - Required

Governance Attack Timing

Calculate minimum time for a malicious proposal to execute:

# Get governance parameters
cast call <GOVERNOR> "votingDelay()(uint256)"   # blocks until voting starts
cast call <GOVERNOR> "votingPeriod()(uint256)"  # blocks for voting
cast call <TIMELOCK> "delay()(uint256)"         # seconds in timelock queue

Document findings as:

Phase	Value	Human Readable	Source
Voting Delay	13140 blocks	1.82 days	`cast call 0x309a... "votingDelay()(uint256)"`
Voting Period	19710 blocks	2.73 days	`cast call 0x309a... "votingPeriod()(uint256)"`
Timelock Delay	172800 seconds	2.00 days	`cast call 0x6d90... "delay()(uint256)"`
Total	-	~6.5 days	Calculated: (13140+19710)*12s/86400 + 172800/86400

Existing Allowances

Check if Timelock has token allowances that could be exploited:

# Check allowances to known spenders (bridges, etc.)
cast call <TOKEN> "allowance(address,address)(uint256)" <TIMELOCK> <SPENDER> --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Spender	Allowance	Source
Base L1StandardBridge	0	`cast call 0xA0b8... "allowance(address,address)(uint256)" 0x6d90... 0x3154...`

Target Contract Front-Running

For proposals calling initialize() or similar one-time functions, verify access control:

# Check who can call the function (read source code on Etherscan)
# Example: Streamer.initialize() has onlyStreamCreator modifier

# Verify the authorized caller
cast call <CONTRACT> "streamCreator()(address)" --rpc-url https://ethereum-rpc.publicnode.com

# Check current state
cast call <CONTRACT> "startTimestamp()(uint256)" --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Check	Value	Source
Access Control	`onlyStreamCreator` modifier	Etherscan source
Authorized Caller	Timelock (0x6d90...)	`cast call <CONTRACT> "streamCreator()(address)"`
Current State	Not initialized (startTimestamp=0)	`cast call <CONTRACT> "startTimestamp()(uint256)"`

External Token Risks

For proposals involving centralized stablecoins (USDC, USDT):

# Check if token is paused
cast call <TOKEN> "paused()(bool)" --rpc-url https://ethereum-rpc.publicnode.com

# Check if addresses are blacklisted
cast call <TOKEN> "isBlacklisted(address)(bool)" <ADDRESS> --rpc-url https://ethereum-rpc.publicnode.com

Document findings as:

Check	Status	Source
USDC Paused	false	`cast call 0xA0b8... "paused()(bool)"`
Timelock Blacklisted	false	`cast call 0xA0b8... "isBlacklisted(address)(bool)" 0x6d90...`

DoS Risk Summary Template

Vector	Risk Level	Mitigation	Verification
Competing proposals	Low/Medium/High	Description	`pnpm decode` + `cast call state()`
Governance attack	Low	X-day detection window	Governance parameter queries
Allowance exploitation	None/Low	Current allowances	`cast call allowance()`
Front-running	None/Low	Access control details	Etherscan source + `cast call`
Token pause/blacklist	External	Current status	`cast call paused()` / `isBlacklisted()`
Balance race	Low/Medium	X% buffer	`cast call balanceOf()`

11. Proposal Simulation

Simulate the proposal execution on a Tenderly virtual testnet to verify it executes successfully end-to-end.

Setup

Create a Tenderly virtual testnet (fork of mainnet)
Configure packages/simulator/proposal.config.json with your Tenderly RPC URL:

{
    "chains": {
        "mainnet": {
            "rpcUrl": "https://virtual.mainnet.eu.rpc.tenderly.co/<YOUR-TESTNET-ID>",
            "chainId": "1",
            "timelockAddress": "0x6d903f6003cca6255D85CcA4D3B5E5146dC33925",
            "governorAddress": "0x309a862bbC1A00e45506cB8A802D1ff10004c8C0"
        }
    }
}

Running the Simulation

# From the monorepo root, simulate a proposal
pnpm simulate $ARGUMENTS

# Simulate with persistence (creates snapshot)
pnpm simulate $ARGUMENTS --persist

# Simulate each action separately (useful for debugging)
pnpm simulate $ARGUMENTS --separately

What the Simulator Does

Syncs state with Tenderly virtual testnet
Delegates COMP to a whale address for voting power
Advances blocks to make proposal active
Casts vote in favor of the proposal
Advances blocks to end voting period
Queues proposal to timelock
Advances time past the timelock delay
Executes the proposal
For L2 bridging proposals, simulates message relay on the target chain

Expected Output

Delegating 300000000000000000000000 COMP to 0x73AF3bcf944a6559933396c1577B257e2054D935...
Delegate transaction sent: 0x...
Syncing state...
Proposal created with ID: 522
Current block number: 24282349
Advancing to 24284235 block to make proposal active...
Casting vote for proposal...
Queueing proposal...
Advancing time by 1209600 seconds...
Executing proposal...
Execution result: 0x...

Interpreting Results

Output	Meaning
`Execution result: 0x...`	Proposal executed successfully
`Skipping target: 0x...`	Target is not a bridge (mainnet-only action)
Error/revert message	Proposal would fail - investigate the cause

Simulation Limitations

Does not simulate actual token bridging (only Compound governance messages)
L2 simulations require separate Tenderly virtual testnets for each chain
Time/block manipulation may not perfectly match mainnet conditions

Document findings as:

Check	Result	Source
Simulation Status	Success	`pnpm simulate $ARGUMENTS`
Execution TX	`0xdc77...`	Tenderly virtual testnet
L2 Bridging	N/A (mainnet-only)	Skipped targets in output

12. Test Report Review

If the proposal includes a test report, verify:

All tests pass (especially chain-specific tests)
Pre and post conditions are checked
Both fast-execute and standard submission paths tested

13. Common Pitfalls

Watch out for these known issues:

Pitfall	Description	How to Detect
Unichain mislabeling	Bridge at `0x81014F44...` shows as "Optimism" in some decoders	Verify via Etherscan
"Unchanged" values	Decoder shows "unchanged" when a prior proposal already applied the change	Check recent executed proposals
Decimal confusion	USDC/USDT have 6 decimals, COMP/WETH have 18	Verify token decimals on-chain
Stale forum posts	Forum post may have been updated after initial posting	Check forum post edit history
Multiple recipients	Bridge proposals may split funds across multiple L2 contracts	Verify all recipients are correct
Gas limit too low	Non-standard `_minGasLimit` for complex L2 operations	Compare to similar past proposals
The required gas exceed tx gas limit	The tx gas limit on Ethereum is 16 mil. No proposal should exceed this.	Check the current tx limit and compare it to the one consumed by the proposal.

14. Review Output Template

Write your review to reviews/proposal-$ARGUMENTS.md using this template:

# Proposal $ARGUMENTS Review

**Date:** YYYY-MM-DD
**Reviewer:** [Name]
**Status:** PENDING REVIEW | APPROVED | APPROVED WITH NOTES | REJECTED

## Summary

- **Proposal Type:** [Parameter Change / Token Transfer / Bridge / Upgrade / Mixed]
- **Risk Level:** [Low / Medium / High / Critical]
- **Actions:** [Number] actions across [Number] chains

[1-2 sentence description of what this proposal does]

## Findings

| # | Severity | Description | Status |
|---|----------|-------------|--------|
| 1 | INFO | Example finding | Verified |

## Forum Comparison

| Parameter | Forum Value | Decoded Value | Status |
|-----------|-------------|---------------|--------|
| ... | ... | ... | ✓ MATCH |

## Address Verification

| Address | Expected | Verified | Source |
|---------|----------|----------|--------|
| ... | ... | ✓ | [Source] |

## Execution Feasibility

| Check | Result | Source |
|-------|--------|--------|
| Token Balance | Sufficient | `cast call ...` |
| Bridge Status | Not Paused | `cast call ...` |

## DoS Risk Analysis

| Vector | Risk Level | Notes |
|--------|------------|-------|
| Competing proposals | Low | No conflicting proposals |

## Simulation Results

| Check | Result |
|-------|--------|
| Mainnet Simulation | Success/Failed |
| L2 Relay | N/A or Success/Failed |

## Decoder Updates

[If you modified the decoder during this review, document changes here]

- None

## Recommendation

**[APPROVE / APPROVE WITH NOTES / REJECT]**

[Explanation of recommendation]

Quick Reference: Common RPC Endpoints

# Ethereum
--rpc-url https://ethereum-rpc.publicnode.com

# Base
--rpc-url https://base-rpc.publicnode.com

# Optimism
--rpc-url https://optimism-rpc.publicnode.com

# Arbitrum
--rpc-url https://arbitrum-one-rpc.publicnode.com

# Polygon
--rpc-url https://polygon-bor-rpc.publicnode.com

# Ronin
--rpc-url https://api.roninchain.com/rpc

# Unichain
--rpc-url https://mainnet.unichain.org

Quick Reference: Common Contract Addresses

Compound V2 (Ethereum)

Comptroller: 0x3d9819210A31b4961b30EF54bE2aeD79B9c9Cd3B
Timelock: 0x6d903f6003cca6255D85CcA4D3B5E5146dC33925
COMP Token: 0xc00e94Cb662C3520282E6f5717214004A7f26888
New Governor: 0x309a862bbC1A00e45506cB8A802D1ff10004c8C0

Base L1 Contracts (on Ethereum)

L1StandardBridge: 0x3154Cf16ccdb4C6d922629664174b904d80F2C35
OptimismPortal: 0x49048044D57e1C92A77f79988d21Fa8fAF74E97e

Optimism L1 Contracts (on Ethereum)

L1StandardBridge: 0x99C9fc46f92E8a1c0deC1b1747d010903E884bE1
OptimismPortal: 0xbEb5Fc579115071764c7423A4f12eDde41f106Ed

Unichain L1 Contracts (on Ethereum)

L1StandardBridge: 0x81014F44b0a345033bB2b3B21C7a1A308B35fEeA

WARNING: The Unichain bridge address (0x81014F44...) is often mislabeled by decoders as "Optimism". Always verify the bridge network via Etherscan labels.