writing-user-outputs

name	writing-user-outputs
description	CLI output formatting standards for worktrunk. Use when writing user-facing messages, error handling, progress output, hints, warnings, or working with the output system.

Output System Architecture

Shell Integration

Worktrunk uses file-based directive passing for shell integration:

1. Shell wrapper creates a temp file via mktemp
2. Shell wrapper sets WORKTRUNK_DIRECTIVE_FILE env var to the file path
3. wt writes shell commands (like cd '/path') to that file
4. Shell wrapper sources the file after wt exits

When WORKTRUNK_DIRECTIVE_FILE is not set (direct binary call), commands execute directly and shell integration hints are shown.

Output Functions

The output system handles shell integration automatically. Just call output functions — they do the right thing regardless of whether shell integration is active.

// NEVER DO THIS - don't check mode in command code
if is_shell_integration_active() {
    // different behavior
}

// ALWAYS DO THIS - just call output functions
eprintln!("{}", success_message("Created worktree"));
output::change_directory(&path)?;  // Writes to directive file if set, else no-op

Printing output:

Use eprintln! and println! from worktrunk::styling (re-exported from anstream for automatic color support and TTY detection):

use worktrunk::styling::{eprintln, println, stderr};

// Status messages to stderr
eprintln!("{}", success_message("Created worktree"));

// Primary output to stdout (tables, JSON, pipeable)
println!("{}", table_output);

// Flush before interactive prompts
stderr().flush()?;

Shell integration functions (src/output/global.rs):

Function	Purpose
change_directory(path)	Shell cd after wt exits (writes to directive file if set)
execute(command)	Shell command after wt exits
terminate_output()	Reset ANSI state on stderr
is_shell_integration_active()	Check if directive file set (rarely needed)
pre_hook_display_path(path)	Compute display path for pre-hooks
post_hook_display_path(path)	Compute display path for post-hooks

Message formatting functions (worktrunk::styling):

Function	Symbol	Color
success_message()	✓	green
progress_message()	◎	cyan
info_message()	○	symbol dim, text plain
warning_message()	▲	yellow
hint_message()	↳	dim
error_message()	✗	red
prompt_message()	❯	cyan

Section headings (worktrunk::styling):

use worktrunk::styling::format_heading;

// Plain heading
format_heading("BINARIES", None)  // => "BINARIES" (cyan)

// Heading with suffix
format_heading("USER CONFIG", Some("~/.config/wt.toml"))
// => "USER CONFIG  ~/.config/wt.toml" (title cyan, suffix plain)

stdout vs stderr

Decision principle: If this command is piped, what should the receiving program get?

• stdout → Data for pipes, scripts, eval (tables, JSON, shell code)
• stderr → Status for the human watching (progress, success, errors, hints)
• directive file → Shell commands executed after wt exits (cd, exec)

Examples:

• wt list → table/JSON to stdout (for grep, jq, scripts)
• wt config shell init → shell code to stdout (for eval)
• wt switch → status messages only (nothing to pipe)

Security

WORKTRUNK_DIRECTIVE_FILE is automatically removed from spawned subprocesses (via shell_exec::Cmd). This prevents hooks from writing to the directive file.

Windows Compatibility (Git Bash / MSYS2)

On Windows with Git Bash, mktemp returns POSIX-style paths like /tmp/tmp.xxx. The native Windows binary (wt.exe) needs a Windows path to write to the directive file.

No explicit path conversion is needed. MSYS2 automatically converts POSIX paths in environment variables when spawning native Windows binaries — shell wrappers can use $directive_file directly. See: https://www.msys2.org/docs/filesystem-paths/

---

CLI Output Formatting Standards

User Message Principles

Output messages should acknowledge user-supplied arguments (flags, options, values) by reflecting those choices in the message text.

// User runs: wt switch --create feature --base=main
// GOOD - acknowledges the base branch
"Created new worktree for feature from main @ /path/to/worktree"
// BAD - ignores the base argument
"Created new worktree for feature @ /path/to/worktree"

Avoid "you/your" pronouns: Messages should refer to things directly, not address the user. Imperatives like "Run", "Use", "Add" are fine — they're concise CLI idiom.

// BAD - "Use 'wt merge' to rebase your changes onto main"
// GOOD - "Use 'wt merge' to rebase onto main"

Avoid redundant parenthesized content: Parenthesized text should add new information, not restate what's already said.

// BAD - parentheses restate "no changes"
"No changes after squashing 3 commits (commits resulted in no net changes)"
// GOOD - clear and concise
"No changes after squashing 3 commits"
// GOOD - parentheses add supplementary info
"Committing with default message... (3 files, +45, -12)"

Two types of parenthesized content with different styling:

1. Stats parentheses → Gray ([90m bright-black): Supplementary numerical info that could be omitted without losing meaning.

   ✓ Merged to main (1 commit, 1 file, +1)
   ◎ Squashing 2 commits into a single commit (2 files, +2)...
   

2. Reason parentheses → Message color: Explains WHY an action is happening; integral to understanding.

   ◎ Removing feature worktree & branch in background (same commit as main, _)
   

Stats are truly optional context. Reasons answer "why is this safe/happening?" and belong with the main message. Symbols within reason parentheses still render in their native styling (see "Symbol styling" below).

Show path when hooks run in a different directory: When hooks run in a worktree other than the user's current (or eventual) location, show the path. Use the appropriate helper function:

1. Pre-hooks and manual wt hook — User is at cwd, no cd happens. Use output::pre_hook_display_path(hooks_run_at). Examples: pre-commit, pre-merge, pre-remove, manual wt hook post-merge.

2. Post-hooks — User will cd to destination if shell integration is active. Use output::post_hook_display_path(destination). Examples: post-create, post-switch, post-start, post-merge (after removal).

// Pre-hooks: user is at cwd, no cd happens
run_hook_with_filter(..., crate::output::pre_hook_display_path(ctx.worktree_path))?;

// Post-hooks: user will cd to destination if shell integration active
ctx.spawn_post_start_commands(crate::output::post_hook_display_path(&destination))?;

Avoid pronouns with cross-message referents: Hints appear as separate messages from errors. Don't use pronouns like "it" that refer to something mentioned in the error message.

// BAD - "it" refers to branch name in error message
// Error: "Branch 'feature' not found"
// Hint:  "Use --create to create it"
// GOOD - self-contained hint
// Error: "Branch 'feature' not found"
// Hint:  "Use --create to create a new branch"

Heading Case

Use sentence case for help text headings: "Configuration files", "JSON output", "LLM commit messages".

Message Consistency Patterns

Use consistent punctuation and structure for related messages.

Ampersand for combined actions: Use & when a single operation does multiple things:

"Removing feature worktree & branch in background"
"Commands approved & saved to config"

Semicolon for joining clauses: Use semicolons to connect related information:

"Removing feature worktree in background; retaining branch (--no-delete-branch)"
"Branch unmerged; to delete, run <underline>wt remove -D</>"  // hint uses underline
"{tool} not authenticated; run <bold>{tool} auth login</>"       // warning uses bold

Explicit flag acknowledgment: Show flags in parentheses when they change behavior:

// GOOD - shows the flag explicitly
"Removing feature worktree in background; retaining branch (--no-delete-branch)"
// BAD - doesn't acknowledge user's explicit choice
"Removing feature worktree in background; retaining branch"

Flag locality: Place flag indicators adjacent to the concept they modify. Flags should appear immediately after the noun/action they affect, not at the end of the message:

// GOOD - (--force) is adjacent to "worktree" which it modifies
"Removing feature worktree (--force) & branch in background (same commit as main, _)"
// BAD - (--force) at end, disconnected from the worktree removal it enables
"Removing feature worktree & branch in background (same commit as main, _) (--force)"

This principle ensures readers can immediately understand what each annotation modifies.

Parallel structure: Related messages should follow the same pattern:

// GOOD - parallel structure with integration reason explaining branch deletion
// Target branch is bold; symbol uses its standard styling (dim for _ and ⊂)
"Removing feature worktree & branch in background (same commit as <bold>main</>, <dim>_</>)"  // Integrated
"Removing feature worktree in background; retaining unmerged branch"                          // Unmerged
"Removing feature worktree in background; retaining branch (--no-delete-branch)"              // User flag

Symbol styling: Symbols are atomic with their color — the styling is part of the symbol's identity, not a presentation choice. Each symbol has a defined appearance that must be preserved in all contexts:

• _ and ⊂ — dim (integration/safe-to-delete indicators)
• +N and -N — green/red (diff indicators)

When a symbol appears in a colored message (cyan progress, green success), close the message color before the symbol so it renders in its native styling. This requires breaking out of the message color and reopening it after the symbol. See FlagNote in src/output/handlers.rs for an example — it handles flag acknowledgment notes (like integration reasons) with proper color transitions via after_cyan() and after_green() methods.

Comma + "but" + em-dash for limitations: When stating an outcome with a limitation and its reason:

// Outcome, but limitation — reason
"Worktree for feature @ ~/repo.feature, but cannot change directory — shell integration not installed"

This pattern:

• States what succeeded (worktree exists at path)
• Uses "but" to introduce what didn't work (cannot cd)
• Uses em-dash to explain why (shell integration status)

See compute_shell_warning_reason() in src/output/shell_integration.rs for the complete spec of shell integration warning messages and hints

Compute decisions once: For background operations, check conditions upfront, show the message, then pass the decision explicitly rather than re-checking in background scripts:

// GOOD - check once, pass decision
let should_delete = check_if_merged();
show_message_based_on(should_delete);
spawn_background(build_command(should_delete));

// BAD - check twice (once for message, again in background script)
let is_merged = check_if_merged();
show_message_based_on(is_merged);
spawn_background(build_command_that_checks_merge_again());  // Duplicate check!

Warning Ordering

Core principle: Warnings about state discovered during evaluation appear before the action message that follows from that evaluation.

When a command evaluates state, discovers something unexpected, and proceeds anyway, the warning should come first:

▲ Branch-worktree mismatch; expected feature @ ~/workspace/project.feature ⚑
◎ Removing feature worktree & branch in background (same commit as main, _)

Not:

◎ Removing feature worktree & branch in background (same commit as main, _)
▲ Branch-worktree mismatch; expected feature @ ~/workspace/project.feature ⚑

Warnings that result from the action itself (something failed during execution) naturally come after the action.

Message Types

Success vs Info: Success (✓) means something was created or changed. Info (○) acknowledges state without changing anything.

Success ✓	Info ○
"Created worktree for feature"	"Switched to worktree for feature"
"Created new worktree for feature"	"Already on worktree for feature"
"Commands approved & saved"	"All commands already approved"

Hint vs Info: Hints suggest user action or provide additional non-essential context (supplementary details the user doesn't need but may find useful). Info acknowledges state without changing anything.

Hint ↳	Info ○
"To continue, run wt merge"	"Already up to date with main"
"Commit or stash changes first"	"Skipping hooks (--no-verify)"
"Branch can be deleted"	"Worktree preserved (main worktree)"
"Failed command, exit code 128:"

Warning placement: When something unexpected happens, warn somewhere. Where depends on the nature of the issue:

Is it unexpected?
├── No → Silent (e.g., gh not installed when no GitHub remote)
└── Yes → Warn somewhere:
    ├── Immediate impact OR temporary → Inline (warning_message or in-band indicator)
    ├── Persists until user action → wt config show (can be checked later)
    └── Not user-fixable → log::warn! (developer diagnostics)

Inline warnings for issues affecting the current command:

Issue	Why inline
Rate limit during CI fetch	Temporary — won't be there next time
Network timeout	Temporary — retry might work
Hook failed during operation	Immediate impact on this command

wt config show for issues that persist until the user fixes them. These don't need to interrupt every command — users can check diagnostics when investigating:

Issue	Why config show
gh not authenticated	User runs gh auth login
Shell integration misconfigured	User updates shell config
Config syntax errors	User fixes config file

log::warn!() for issues users cannot fix. These help developers debug but shouldn't clutter user output:

Issue	Why log::warn!
JSON parse error (API changed)	Requires code fix
Internal invariant violated	Developer bug

Command suggestions in hints: When a hint includes a runnable command, use "To X, run Y" pattern. End with the command for easy copying:

// GOOD - command at end for easy copying
"To delete the unmerged branch, run wt remove feature -D"
"To rebase onto main, run wt step rebase or wt merge"

// GOOD - recovery command after shadowing a remote branch
"To switch to the remote branch, delete this branch and run without --create: wt remove feature && wt switch feature"

// BAD - command without context
"wt remove feature -D deletes unmerged branches"

// BAD - command not at end (hard to copy)
"Run wt switch feature (without --create) to switch to the remote branch"

For general action guidance without a specific command, direct imperatives are clearer:

// GOOD - direct imperative for general guidance
"Commit or stash changes first"
"Run from inside a worktree, or specify a branch name"

// VERBOSE - "To proceed" adds nothing
"To proceed, commit or stash changes first"

Description + command in single message: For warnings/errors that include a recovery command, join with semicolon. Use <bold> for commands in warnings/errors (only hints use <underline>):

// Warning with inline recovery command (bold for commands)
warning_message("Failed to restore stash; run <bold>git stash pop {ref}</> to restore manually")
warning_message("{tool} not authenticated; run <bold>{tool} auth login</>")

// For longer suggestions, use separate hint message (underline for commands)
warning_message("Failed to restore stash")
hint_message("To restore manually, run <underline>git stash pop {ref}</>")

Multiple suggestions in one hint: When combining suggestions with semicolons, put the more commonly needed command last for easy terminal copying:

// GOOD - common action (create) last, easy to select and copy
"To list branches, run wt list --branches; to create a new branch, run wt switch feature --create"

// BAD - common action buried, harder to copy
"To create a new branch, run wt switch feature --create; to list branches, run wt list --branches"

Use suggest_command() from worktrunk::styling for proper shell escaping.

Every user-facing message requires either a symbol or a gutter.

Section titles: For sectioned output (wt hook show, wt config show), use format_heading() from worktrunk::styling (documented above).

Blank Line Principles

Core principle: When presenting the user with text to read and consider, add spacing for readability. When piping output (stdout), keep output dense for parsing.

Specific rules:

• No leading/trailing blanks — Start immediately, end cleanly

• Blank before prompts, not after — Signal "pause, something interactive is happening" before the prompt; once the user responds, output flows continuously

• One blank between phases — When a sub-operation completes and a different operation begins, add a blank line to visually separate them

• Never double blanks — One blank line maximum between elements

• Hints attach to their subject — Never put a blank line between a hint and the message it elaborates on. Hints (↳) are subordinate — they belong directly below their parent message with no gap.

  // GOOD - hint directly follows its subject
  ↳ fish: Not configured shell extension
  ↳ To configure, run wt config shell install
  
  // BAD - blank line detaches hint from subject
  ↳ fish: Not configured shell extension
  
  ↳ To configure, run wt config shell install
  

Prompt spacing: A blank line before the prompt signals "something different is about to happen" and gives the user's eye a natural stopping point before they need to read and respond. No blank line after — the user's input ends the interactive moment and subsequent output flows naturally from that decision.

◎ Detecting available LLM tools...

❯ Configure claude for commit messages? [y/N/?] y
✓ Added to user config:
   ┃ [commit.generation]
   ┃ command = "..."
↳ View config: wt config show

▲ Auto-staging 1 untracked path:
   ┃ a
◎ Generating commit message...

Phase separation: A "phase" is a logically distinct operation. The blank line between the hint and warning above signals "config setup is done, now we're doing the main command workflow."

Interactive prompts must flush stderr before blocking on stdin:

eprint!("❯ Allow and remember? [y/N] ");
stderr().flush()?;
io::stdin().read_line(&mut response)?;

Temporal Locality: Output Should Be Close to Operations

Output should appear immediately adjacent to the operations it describes. Progress messages apply only to slow operations (>400ms): git operations, network requests, builds.

Sequential operations should show immediate feedback:

for item in items {
    eprintln!("{}", progress_message(format!("Removing {item}...")));
    perform_operation(item)?;
    eprintln!("{}", success_message(format!("Removed {item}")));  // Immediate feedback
}

Bad example (output decoupled from operations):

◎ Removing worktree for feature...
◎ Removing worktree for bugfix...
                                    ← Long delay, no feedback
Removed worktree for feature        ← All output at the end
Removed worktree for bugfix

Signs of poor temporal locality: collecting messages in a buffer, single success message for batch operations, no progress before slow operations.

Information Display: Show Once, Not Twice

Progress messages should include all relevant details (what's being done, counts, stats, context). Success messages should be minimal, confirming completion with reference info (hash, path).

// GOOD - detailed progress, minimal success
eprintln!("{}", progress_message("Squashing 3 commits & working tree changes into a single commit (5 files, +60)..."));
perform_squash()?;
eprintln!("{}", success_message("Squashed @ a1b2c3d"));

Style Constants

Only three anstyle constants exist for table rendering (src/styling/constants.rs):

• ADDITION: Green (diffs)
• DELETION: Red (diffs)
• GUTTER: BrightWhite background

For everything else, use cformat! tags.

Styling in Command Code

Use eprintln! with formatting functions. Use cformat! for inner styling:

eprintln!("{}", success_message(cformat!("Created <bold>{branch}</> from <bold>{base}</>")));
eprintln!("{}", hint_message(cformat!("Run <underline>wt merge</> to continue")));

color-print tags: <bold>, <dim>, <underline>, <bright-black>, <red>, <green>, <yellow>, <cyan>, <magenta>

Branch names and status values should be bolded in messages.

Symbol constants in cformat!: For messages that bypass output:: functions (e.g., GitError Display impl), use symbol constants directly:

cformat!("{ERROR_SYMBOL} <red>Branch <bold>{branch}</> not found</>")

Commands and Branches in Messages

Never quote commands or branch names. Use styling to make them stand out:

• In normal font context: Use <bold> for commands and branches
• In hints: Use <underline> for commands and data values (paths, branches). Underline is safe inside <dim> — closing [24m only resets underline, preserving dim. Avoid <bold> inside hints — the closing [22m resets both bold AND dim, so text after </bold> loses dim styling.

// GOOD - bold in normal context
eprintln!("{}", info_message(cformat!("Use <bold>wt merge</> to continue")));
// GOOD - underline for commands in hints
eprintln!("{}", hint_message(cformat!("Run <underline>wt list</> to see worktrees")));
// BAD - quoted commands
eprintln!("{}", hint_message("Run 'wt list' to see worktrees"));

Design Principles

• cformat! for styling — Never manual escape codes (\x1b[...)
• cformat! variables are safe — Tags like <bold> are processed at compile time only. Runtime variable values are NOT interpreted as markup, so user content (branch names, commit messages, paths, shell commands with </> redirects) can be interpolated directly without escaping. Do NOT escape </> in variables — it adds extra chars.
• YAGNI — Most output needs no styling
• Graceful degradation — Colors auto-adjust (NO_COLOR, TTY detection)
• Unicode-aware — Width calculations respect symbols and CJK (via StyledLine)

StyledLine for table rendering with proper width calculations:

use worktrunk::styling::StyledLine;
use anstyle::{AnsiColor, Color, Style};

let mut line = StyledLine::new();
line.push_styled("Branch", Style::new().dimmed());
line.push_raw("  ");
line.push_styled("main", Style::new().fg_color(Some(Color::Ansi(AnsiColor::Cyan))));
println!("{}", line.render());

See src/commands/list/render.rs for advanced usage.

Documentation Examples

Use consistent examples throughout all documentation, help text, and config templates.

Canonical example setup

Element	Value	Notes
Repo directory	myproject	Generic placeholder
Repo path	~/code/myproject	Realistic dev path
Branch	feature/auth	Shows sanitize filter
Worktree path	~/code/myproject.feature-auth	Result of default template

Template variable examples

Use the canonical values from the table above in all examples:

{{ repo }}           — Repository directory name (e.g., `myproject`)
{{ branch }}         — Branch name (e.g., `feature/auth`)
{{ worktree_path }}  — Absolute path to worktree (e.g., `/path/to/myproject.feature-auth`)

In TOML comments:

#   {{ repo }}           - Repository directory name (e.g., "myproject")
#   {{ branch }}         - Raw branch name (e.g., "feature/auth")
#   {{ worktree_name }}  - Worktree directory name (e.g., "myproject.feature-auth")

Worktree path examples

When showing worktree-path template examples:

# Default — siblings in parent directory
# Creates: ~/code/myproject.feature-auth
worktree-path = "../{{ repo }}.{{ branch | sanitize }}"

# Inside the repository
# Creates: ~/code/myproject/.worktrees/feature-auth
worktree-path = ".worktrees/{{ branch | sanitize }}"

Gutter Formatting

Use gutter for quoted content (git output, commit messages, config to copy, hook commands being displayed):

• format_bash_with_gutter() — shell commands (dimmed + syntax highlighting)
• format_with_gutter() — other content

Gutter vs Table: Tables for structured app data; gutter for quoting external content.

Gutter vs Hints: Command suggestions in hints use inline <underline>, not gutter. Gutter is for displaying content (what will execute, config to copy); hints suggest what the user should run.

Newline Convention

Core principle: All formatting functions return content WITHOUT trailing newlines. Callers handle element separation.

This applies to:

• Message functions: error_message(), success_message(), hint_message(), etc.
• Gutter functions: format_with_gutter(), format_bash_with_gutter()

With eprintln!: Adds trailing newline automatically.

eprintln!("{}", progress_message("Merging..."));
eprintln!("{}", format_with_gutter(&log, None));

In Display impls: Use explicit newlines for element separation.

// Pattern: leading \n separates from previous element
write!(f, "{}", error_message(...))?;           // first element, no leading \n
write!(f, "\n{}", format_with_gutter(...))?;    // gutter, separated by \n
write!(f, "\n{}", hint_message(...))            // hint, separated by \n

// For blank line between elements, add extra \n
write!(f, "\n{}\n", format_with_gutter(...))?;  // trailing \n creates blank line
write!(f, "\n{}", hint_message(...))            // hint after blank line

Don't add trailing \n to content:

// GOOD - eprintln! adds newline
eprintln!("{}", progress_message("Merging..."));

// BAD - double newline
eprintln!("{}", progress_message("Merging...\n"));

Avoid bullets — use gutter instead. Instead of "\n - {}: {}" bullet formatting, use format_with_gutter() to present lists.

Error Formatting

Error Message Structure

Error and warning messages should communicate four things:

1. What happened — The actual state or outcome
2. What was expected — The correct or desired state
3. The impact — Why this matters (optional for obvious cases)
4. How to resolve — What the user should do (can be a separate hint message)

// GOOD - states actual, expected, and impact in main message
"Shell probe: wt is binary at /path, not function — won't auto-cd"
//                 ^^^^^^^^^^^^^^^   ^^^^^^^^^^^^   ^^^^^^^^^^^^^^
//                 actual            expected       impact
// Resolution in separate hint: "Restart shell to activate"

// GOOD - actual vs expected with resolution inline
"Config file has 3 errors, expected valid TOML; run wt config validate for details"
//              ^^^^^^^    ^^^^^^^^                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
//              actual     expected                  resolution

// BAD - only states actual, no expected or impact
"Shell probe: wt resolves to binary at /path"
// Missing: what should it be instead? why does it matter?

// BAD - vague, no actionable information
"Shell integration problem detected"
// Missing: what's wrong? what should it be? what to do?

When the expected state is obvious from context, it can be implied:

// OK - expected state (file should exist) is obvious
"Config file not found at ~/.config/wt/config.toml"

// OK - expected state (should succeed) is obvious
"Failed to read config: permission denied"

Diagnostic messages (like wt config show) should follow this pattern especially carefully — users read diagnostics to understand what's wrong.

Single vs Multi-line

Single-line errors with variables are fine:

// GOOD - single-line with path variable
.map_err(|e| format!("Failed to read {}: {}", format_path_for_display(path), e))?

// GOOD - using .context() for simple errors
std::fs::read_to_string(&path).context("Failed to read config")?

Multi-line external output (git, hooks, LLM) needs gutter:

1. Show the command that was run (with arguments)
2. Put multi-line output in a gutter

✗ Commit generation command 'llm --model claude' failed
   ┃ Error: [Errno 8] nodename nor servname provided

// NOT: ✗ ... failed: LLM command failed: Error: [Errno 8]...

See src/git/error.rs for examples of this pattern in GitError Display impls.

Verbose Output (-v and -vv)

-v (verbose): User-facing diagnostic output. Must follow these guidelines. Shows template expansions and other details users might need for debugging config.

Format for template expansion:

○ Expanding name
 ┃ template → result

• Info message for header (○ symbol, "Expanding" + bold name)
• Gutter for quoted content (template → result)
• Arrow → is dim
• For multiline: template lines, dim → on its own line, result lines

-vv (debug): Developer-facing logging output. MAY violate these guidelines. Uses log::debug!() with structured format for deep debugging. Not intended for regular users.

Path Formatting

All user-facing paths must use format_path_for_display() from worktrunk::path. This function replaces home directory prefixes with ~ for readability (e.g., /Users/alex/projects/repo → ~/projects/repo).

Use @ (not "at") before paths in status messages. This is the codebase convention for associating an entity with a location:

// GOOD - @ before path
"Created worktree for feature @ ~/code/repo.feature"
"Squashed @ a1b2c3d"
"Worktree for feature @ ~/repo.feature, but cannot change directory..."

// BAD - "at" before path
"Created worktree for feature at ~/code/repo.feature"

Exception: Prose contexts (error descriptions, doc comments, help text) use "at" — @ is for terse status messages only.

use worktrunk::path::format_path_for_display;

// GOOD - uses format_path_for_display
eprintln!("{}", success_message(cformat!(
    "Created worktree @ {}",
    format_path_for_display(&worktree_path)
)));

// GOOD - error messages too
.map_err(|e| format!("Failed to read {}: {}", format_path_for_display(path), e))?

// BAD - raw path.display()
eprintln!("{}", success_message(format!(
    "Created worktree @ {}",
    worktree_path.display()  // Shows /Users/alex/... instead of ~/...
)));

Applies to:

• Success/info/warning/error messages
• Hints suggesting paths
• Progress messages
• Dry-run previews

Exceptions:

• Debug logging (log::debug!) — full paths help debugging
• Paths passed to git commands — must be real paths

Table Column Alignment

• Text columns (Branch, Path): left-aligned
• Numeric columns (HEAD±, main↕): right-aligned

Snapshot Testing

Every command output must have snapshot tests (tests/integration_tests/). See tests/integration_tests/remove.rs for the standard pattern using setup_snapshot_settings(), make_snapshot_cmd(), and assert_cmd_snapshot!().

Cover success/error states, with/without data, and flag variations.