git-guardrails

name	git-guardrails
description	Configure des hooks Claude Code pour bloquer les commandes git dangereuses (push, force-push, reset --hard, clean, branch -D, checkout/restore) avant leur exécution. Empêche les opérations git destructrices au niveau de l'agent.
version	1.1.0
license	MIT
metadata	{"author":"Foundation Skills","adapted_from":"DamienBattistella/skills/git-guardrails-claude-code"}

Git Guardrails

Sets up a PreToolUse hook that intercepts and blocks dangerous git commands before Claude Code executes them.

Prerequisites

• jq: required for the hook script to parse tool input — install with brew install jq or apt-get install jq
  • Important: if jq is not installed, the hook will fail open (allow all commands). Always verify jq is available after setup.

When to Use This Skill

Activate when the user:

• Wants to prevent destructive git operations from being run by the AI agent
• Asks to add git safety hooks to Claude Code
• Wants to block git push, git reset --hard, or other dangerous commands
• Is setting up a new project and wants guardrails on git operations

What Gets Blocked

The following commands are intercepted and blocked before execution:

Pattern	Description
git push	All push variants (prevents unreviewed pushes)
git push --force	Force push (rewrites remote history)
git push --force-with-lease	Force push variant
git reset --hard	Discards all uncommitted changes
git clean -f / git clean -fd	Deletes untracked files permanently
git branch -D	Force-deletes a branch without merge check
git checkout .	Discards all working tree changes
git restore .	Discards all working tree changes
git rebase on main/master	Prevents rebase of protected branches

When blocked, Claude sees a message telling it that it does not have authority to run these commands. The user must run them manually if needed.

Setup Steps

Step 1: Ask Scope

Ask the user: install for this project only (.claude/settings.json) or all projects (~/.claude/settings.json)?

Step 2: Copy the Hook Script

The bundled script is at: reference/block-dangerous-git.sh

Copy it to the target location based on scope:

• Project: .claude/hooks/block-dangerous-git.sh
• Global: ~/.claude/hooks/block-dangerous-git.sh

Make it executable:

chmod +x <path-to-script>

Step 3: Add Hook to Settings

Add to the appropriate settings file.

Project scope (.claude/settings.json):

{
  "hooks": {
    "PreToolUse": [
      {
        "matcher": "Bash",
        "hooks": [
          {
            "type": "command",
            "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/block-dangerous-git.sh"
          }
        ]
      }
    ]
  }
}

Global scope (~/.claude/settings.json):

{
  "hooks": {
    "PreToolUse": [
      {
        "matcher": "Bash",
        "hooks": [
          {
            "type": "command",
            "command": "~/.claude/hooks/block-dangerous-git.sh"
          }
        ]
      }
    ]
  }
}

If the settings file already exists, merge the hook into the existing hooks.PreToolUse array. Do not overwrite other settings.

Step 4: Ask About Customization

Ask if the user wants to add or remove any patterns from the blocked list. Edit the copied script accordingly.

Common additions users may want:

• Block git stash drop (prevents accidental stash loss)
• Block git tag -d (prevents tag deletion)
• Allow git push but only block --force variants

Step 5: Verify Installation

Run a quick test to confirm the hook works:

echo '{"tool_input":{"command":"git push origin main"}}' | <path-to-script>

Expected result: exits with code 2 and prints a BLOCKED message to stderr.

Run a second test with a safe command:

echo '{"tool_input":{"command":"git status"}}' | <path-to-script>

Expected result: exits with code 0 (allowed).

How It Works

Claude Code supports PreToolUse hooks that run before any tool invocation. The hook:

1. Receives the tool input as JSON on stdin
2. Extracts the command field using jq
3. Checks the command against a list of dangerous patterns
4. If a match is found, exits with code 2 (which tells Claude the command is blocked)
5. If no match, exits with code 0 (which allows normal execution)

Important Notes

• The hook only blocks commands run by the AI agent. The user can still run any git command manually in their terminal.
• The blocked patterns use regex matching, so git push also catches git push origin main --force.
• If jq is not installed, the script will fail open (allow all commands). Ensure jq is available.
• The hook does not modify any git configuration; it only intercepts Claude Code tool calls.