media-kit-macos-codesign-crash

name	media-kit-macos-codesign-crash
description	Fix Flutter macOS app crash at launch due to media_kit library loading failure. Use when: (1) macOS app builds successfully but crashes immediately on launch, (2) Crash log shows "Library not loaded: @rpath/Ass.framework" or similar media_kit framework, (3) Error says "code signature not valid for use in process: Trying to load an unsigned library", (4) Problem appears after flutter clean or fresh clone, (5) Codesign script exists in Podfile but frameworks are still unsigned after build - check build phase ORDER. Fixes unsigned media_kit native frameworks (Ass.framework, Avcodec.framework, etc.) by adding post-build codesigning AND ensuring correct build phase ordering.
author	Claude Code
version	2.0.0
date	"2026-02-22T00:00:00.000Z"

Media Kit macOS Codesign Crash Fix

Problem

Flutter macOS apps using media_kit (video player library) crash immediately at launch after a clean build. The app builds successfully but fails to start due to unsigned native frameworks.

Context / Trigger Conditions

• macOS Flutter app using media_kit or media_kit_video package
• App builds without errors: "Built build/macos/Build/Products/Debug/divine.app"
• App crashes immediately on launch with no UI appearing
• Crash report or console shows:

  Library not loaded: @rpath/Ass.framework/Versions/A/Ass
  Reason: code signature in '...' not valid for use in process: Trying to load an unsigned library
  

• Often occurs after flutter clean, pod deintegrate + pod install, or fresh git clone
• CRITICAL: Can also occur when the codesign script EXISTS but runs in the wrong order

Root Cause: Build Phase Ordering

The most common cause (especially after pod deintegrate + pod install) is that the Xcode build phases end up in the wrong order:

WRONG order (codesign runs before frameworks are copied):

1. [CP] Check Pods Manifest.lock
2. Sources
3. Frameworks
4. Resources
5. Bundle Framework
6. ShellScript (Flutter assemble)
7. Codesign media_kit frameworks    ← SIGNS NOTHING (frameworks not embedded yet)
8. [CP] Embed Pods Frameworks       ← copies frameworks into app bundle

CORRECT order (embed first, then codesign):

1. [CP] Check Pods Manifest.lock
2. Sources
3. Frameworks
4. Resources
5. Bundle Framework
6. ShellScript (Flutter assemble)
7. [CP] Embed Pods Frameworks       ← copies frameworks into app bundle
8. Codesign media_kit frameworks    ← signs the embedded frameworks
9. FlutterFire upload symbols        ← (if applicable, should be last)

Solution

Step 1: Add Codesign Phase via Podfile (if missing)

Add this block inside the post_install do |installer| section:

post_install do |installer|
  # Add script phase to codesign media_kit frameworks (fixes unsigned library crash)
  installer.pods_project.targets.each do |target|
    if target.name == 'media_kit_libs_macos_video'
      target.build_configurations.each do |config|
        config.build_settings['CODE_SIGN_IDENTITY'] = '-'
      end
    end
  end

  # Also add codesigning to the main project's frameworks
  main_project = installer.aggregate_targets.first.user_project
  main_project.targets.each do |target|
    if target.name == 'Runner'
      # Check if script phase already exists
      phase_name = 'Codesign media_kit frameworks'
      existing_phase = target.shell_script_build_phases.find { |p| p.name == phase_name }

      unless existing_phase
        phase = target.new_shell_script_build_phase(phase_name)
        phase.shell_script = <<-SCRIPT
# Codesign media_kit frameworks with ad-hoc signature
for framework in "${BUILT_PRODUCTS_DIR}/${PRODUCT_NAME}.app/Contents/Frameworks"/*.framework; do
  if [ -d "$framework" ]; then
    codesign --force --deep --sign - "$framework" 2>/dev/null || true
  fi
done
        SCRIPT
        phase.shell_path = '/bin/bash'
      end
    end
  end
  main_project.save

  # ... rest of your existing post_install code ...

Step 2: Verify Build Phase Ordering (CRITICAL)

The Podfile adds the codesign phase but cannot guarantee ordering. After pod install, check macos/Runner.xcodeproj/project.pbxproj for the Runner target's buildPhases array.

Search for the buildPhases block in the Runner native target section. Ensure this order:

[CP] Embed Pods Frameworks          ← MUST be BEFORE codesign
Codesign media_kit frameworks       ← MUST be AFTER embed
FlutterFire: upload symbols         ← SHOULD be last (if present)

If the order is wrong, swap the lines in the buildPhases array. Example fix:

 buildPhases = (
     ...
     3399D490228B24CF009A79C7 /* ShellScript */,
-    9AD7FD721DF2C6A84F6A1FC3 /* Codesign media_kit frameworks */,
-    51BD49356784271F7E3B2B6C /* [CP] Embed Pods Frameworks */,
-    BBC532B406767D40236ED3DB /* FlutterFire: "flutterfire upload-crashlytics-symbols" */,
+    51BD49356784271F7E3B2B6C /* [CP] Embed Pods Frameworks */,
+    9AD7FD721DF2C6A84F6A1FC3 /* Codesign media_kit frameworks */,
+    BBC532B406767D40236ED3DB /* FlutterFire: "flutterfire upload-crashlytics-symbols" */,
 );

Step 3: Rebuild

flutter clean
flutter pub get
cd macos && pod install && cd ..
flutter run -d macos

Emergency Quick Fix (Manual Codesign)

If you need the app running NOW before fixing build phases:

for fw in build/macos/Build/Products/Debug/<app>.app/Contents/Frameworks/*.framework; do
  codesign --force --deep --sign - "$fw"
done
codesign --force --deep --sign - "build/macos/Build/Products/Debug/<app>.app"
open "build/macos/Build/Products/Debug/<app>.app"

Verification

1. Build output should show: "warning: Run script build phase 'Codesign media_kit frameworks' will be run during every build"
2. App should launch without crash
3. Verify frameworks are signed: codesign -v build/macos/.../app.app/Contents/Frameworks/Ass.framework

Diagnosing Build Phase Order Issues

If the codesign script exists but frameworks are still unsigned, check ordering:

# Check which frameworks are unsigned in the built app
for fw in build/macos/Build/Products/Debug/<app>.app/Contents/Frameworks/*.framework; do
  result=$(codesign -v "$fw" 2>&1)
  if echo "$result" | grep -q "not signed"; then
    echo "UNSIGNED: $(basename $fw)"
  fi
done

If ALL media_kit frameworks (Ass, Avcodec, Avformat, etc.) are unsigned but the codesign script exists in the project, it's almost certainly a build phase ordering problem.

Notes

• This affects debug builds primarily; release builds with proper code signing may not need this
• The - sign identity means ad-hoc signing (no certificate required)
• Affected frameworks from media_kit include: Ass.framework, Avcodec.framework, Avformat.framework, Avutil.framework, Dav1d.framework, Freetype.framework, Fribidi.framework, Harfbuzz.framework, Mbedcrypto.framework, Mbedtls.framework, Mbedx509.framework, Mpv.framework, Png16.framework, Swresample.framework, Swscale.framework, Uchardet.framework, Xml2.framework
• The || true in the script prevents build failures if codesigning fails for any framework
• Build phase ordering can silently break after pod deintegrate + pod install cycles
• The new_shell_script_build_phase CocoaPods API appends to the end of build phases, which may be AFTER CocoaPods' own embed phase—but after pod reinstalls, the embed phase can get re-added at the very end, pushing it AFTER your codesign phase

Related: Duplicate Mpv.framework Warning

If you see ObjC runtime warnings like:

Class Application is implemented in both .../Mpv.framework/Versions/A/Mpv (0xADDR1) and
.../Mpv.framework/Versions/A/Mpv (0xADDR2). This may cause spurious casting failures.

This indicates Mpv.framework is loaded twice, often caused by using a git fork of media_kit_video alongside pub.dev media_kit_libs_macos_video. The fork's podspec links -framework Mpv directly while the libs package also vendors it. This can cause mpv config cache corruption and crashes like:

Assertion failed: (group_index >= 0), function m_config_cache_from_shadow, file m_config_core.c

A clean build usually resolves this. If persistent, consider switching to the released version of media_kit_video.

References

• media_kit GitHub: https://github.com/media-kit/media-kit
• Apple Code Signing Guide: https://developer.apple.com/documentation/security/code_signing_services