القائمة
Check the health of the Pi TFT display. Use when the user says "pi status", "check pi", "is the pi running", or wants to diagnose display issues.
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Compile and flash ESP32 firmware via USB, then start a timed serial log capture for crash debugging. Use when the user says "flash", "upload firmware", "flash and log", or wants to test new firmware changes on the device.
Deploy display.py to the Pi TFT display. Use when the user says "deploy display", "deploy pi display", "push display", "update display", or after making changes to pi-display/display.py. Do NOT use for Golf/CircuitPython/CIRCUITPY deployments.
Review code against NASA JPL's Power of Ten safety-critical coding rules. Use when the user says "nasa review", "nasa rules", "power of ten", or wants a safety-critical code audit.
Deploy Golf Arduino firmware to the Adafruit Matrix Portal M4. Use when the user says "deploy golf", "flash golf", "deploy it" after editing Golf code, or after making changes to tracker_golf/.
Manage the Railway-hosted proxy server. Use when the user says "railway", "deploy proxy", "proxy logs", "proxy status", "redeploy", or wants to check/manage the Railway deployment.
Deploy server.js to Railway. Use when the user says "deploy server", "push server", "update proxy", or after making changes to server/server.js.
| name | pi-status |
| description | Check the health of the Pi TFT display. Use when the user says "pi status", "check pi", "is the pi running", or wants to diagnose display issues. |
| allowed-tools | Bash |
SSH into the Raspberry Pi and check the TFT display service, system resources, and recent logs.
ssh -i ~/.ssh/pi_proxy pi@airplanes.local "sudo systemctl status tft-display --no-pager"
Expected: Active: active (running). Process manager is systemd (not PM2).
Run these in a single SSH session:
ssh -i ~/.ssh/pi_proxy pi@airplanes.local "echo '--- CPU TEMP ---' && vcgencmd measure_temp && echo '--- MEMORY ---' && free -h && echo '--- UPTIME ---' && uptime && echo '--- DISK ---' && df -h /"
Check the last 20 lines of the display service for errors:
ssh -i ~/.ssh/pi_proxy pi@airplanes.local "sudo journalctl -u tft-display -n 20 --no-pager 2>&1 | grep -i -E 'error|fail|crash|Traceback' | tail -5"
Tell the user: