القائمة
This skill should be used when performing architect calculations including floor area analysis, structural estimation, MEP load calculation, and cost estimation.
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
| name | architect-calculator |
| description | This skill should be used when performing architect calculations including floor area analysis, structural estimation, MEP load calculation, and cost estimation. |
| user-invocable | true |
| metadata | {"class":"B","status":"unverified"} |
⚠️ UNVERIFIED — DO NOT QUOTE NUMBERS AS FACT. The numeric values in this file (fees, penalties, deadlines, thresholds) were drafted from general knowledge and have not been verified clause-by-clause against current Taiwan regulations. Before citing any figure: (1) verify the current provision via MCP
taiwan-building-code_search_building_codeor the Laws & Regulations Database (law.moj.gov.tw); (2) never output a penalty or threshold amount without its governing article number. Methodology: seeraw/建築顧問方法論/不確定性標示與來源管控/uncertainty-and-source-control/SKILL.md.
建築師專用計算工具箱，整合常用設計計算、法規檢查與成本估算功能。
interface ArchitectCalculatorParams {
// 專案條件
projectType: 'Residential' | 'Commercial' | 'Industrial' | 'Public';
siteArea: number; // m²
floors: number;
// 設計條件
buildingCoverage: number; // 建蔽率 %
floorAreaRatio: number; // 容積率
floorHeight: number; // m
// 結構參數
structuralSystem: 'RC' | 'Steel' | 'SC';
span: number; // m
seismicZone: number; // TODO: 台灣地震區 1-4
// 機電參數
coolingLoad: number; // W/m²
electricalLoad: number; // VA/m²
// TODO: 台灣法規參數
taiwanZoning: {
zoneType: string; // TODO: 土地使用分區
coverageLimit: number; // TODO: 各分區建蔽率上限
farLimit: number; // TODO: 各分區容積率上限
};
}
calculateMaxBuildingArea(site, coverage) - 最大建構面積calculateMaxFARArea(site, far) - 最大樓地板面積estimateBeamSize(span, load) - 樑尺寸估算estimateColumnSize(stories, load) - 柱尺寸估算estimateSlabThickness(span) - 樓板厚度估算calculateCoolingLoad(area, usage) - 冷負載計算estimateCost(area, quality) - TODO: 台灣建築成本估算This skill should be used whenever producing a consulting answer or authoring/editing a knowledge-base skill, to control how facts are sourced and how uncertainty is expressed: it defines the source-control iron rule (never infer un-transcribed numeric values from general practice), the three certainty labels (Verified / Secondary / Unverified), the ERROR/WARNING/INFO check-output convention, the To-Verify section format, and the tone rules that prevent confidently-wrong output.
This skill should be used when a contributor wants to submit a new skill, edit an existing skill, or make any change to the Taiwan Architect KB repository. It guides the full lifecycle: clone/fetch, branch, create/edit, self-validate, and submit PR.
This skill should be used when checking stair dimensional compliance for buildings in Taiwan — minimum stair-and-landing width, riser height, tread depth by building-use category, and the critical handrail-encroachment rule (clear width must remain >= 75 cm regardless of handrails), per Taiwan Building Technical Regulations (Design & Construction) Article 33, Chapter 2 Section 7 (Stairs, Railings, Ramps, Articles 33-39). Railings (Art. 38), handrails (Art. 37) and ramps (Art. 39) are stubbed for later completion.
This skill should be used when an architect receives just an address or lot number (地號) for a site in Taichung City, Taiwan, and needs to quickly understand the land's basic data — zoning, registered land area, land value, building numbers and permits, building overlay/footprint status, urban planning land-use regulations, geological hazard zones, slope-land restrictions, fire-break setback zones, active fault distances, and sewer connection announcements — while also getting a head start on the official PDF certificates commonly needed as supporting documents for a later building permit application. Trigger scenarios: evaluating site feasibility right after receiving an address/lot number, checking land-use restrictions and pre-gathering supporting documents before a permit application, due diligence before a real-estate transaction, or converting a Taichung street address to its lot number. Taichung City only — does not work for other Taiwan counties/cities.
This skill should be used when architects or project teams need to query, organize, compare, or source-check Taiwan public works quality-management references, inspection forms, supervision references, traffic-maintenance references, occupational safety references, PCIC construction specifications, and public works checklist sources.
This skill should be used when verifying CNS (Chinese National Standards) on public engineering drawings or querying PCC (Public Construction Commission) guide specifications.