postman-session-operator

النجوم٦

التفرعات٠

آخر تحديث٧ يوليو ٢٠٢٦ في ١٣:٥٥

USE FOR: MUST LOAD after sends or live mailbox/session work: passive waits, exact replies, bounded status, stale/dead-letter state, and pane hints. DO NOT USE FOR: first-contact sends, polling loops, or topology audits.

التثبيت

التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.

المصدر

i9wa4

i9wa4/tmux-a2a-postman

فتح مستودع GitHub عرض مستودعات المنشئ

تنزيل

المهن ذات الصلةSOC

استنادا إلى تصنيف SOC المهني

مطوّرو البرمجياتمهن الحاسوب والرياضيات·SOC 15-1252

مستكشف الملفات

2 ملفات

SKILL.md

readonly

name	postman-session-operator
license	MIT
description	USE FOR: MUST LOAD after sends or live mailbox/session work: passive waits, exact replies, bounded status, stale/dead-letter state, and pane hints. DO NOT USE FOR: first-contact sends, polling loops, or topology audits.

postman-session-operator

MUST load after sending or live mailbox/session work; first contact uses postman-send-message.

1. USE FOR / Procedure

Do not poll. After sends or delegated work, wait passively for notification, exact reply, timeout/watchdog boundary, explicit user status request, or concrete delivery trouble.
pop is only for explicit notification/current evidence of mail; never run repeated pop or sleep/pop loops.
Bounded status is only for explicit user status request, watchdog boundary, or concrete delivery trouble; never use status as a heartbeat.
tmux-a2a-postman inspect-message --id <message_id> is read-only historical lookup. Use --path for the stored Markdown path and --body for sender-authored body text.
After every successful pop with status=message, read the complete archived Markdown body before any handling, routing, reply, status decision, or no-action or no-op decision. messageType: ping, replyPolicy: none, and other metadata do not allow skipping the body. truncated command output does not count as a complete read.
Both send-heredoc and pop output a submit_path field (daemon-submit or post) identifying whether daemon mediation was used or bypassed by direct filesystem access. This applies to all output including empty pop results. Use submit_path to audit fallback behavior.
Filling an input request closes transport, not task acceptance. After any exact reply, check send JSON fill, required_input, and notice. DONE/completion or BLOCKED/task-acceptance replies require Task artifact: <artifact-reference>, Original checklist: PASS, evidence, and Remaining blockers: none. Use BLOCKED with Original checklist: FAIL.
Receivers verify checklist status, durable references, evidence, and blockers before relaying, approving, or closing work.
Pane ids require exact tmux verification; missing panes are stale evidence. Dead letters, missing routes, or stale topology go to postman-config-auditor. More detail: Session Flow.

المزيد من هذا المستودع

نفس المستودع

postman-config-auditor

i9wa4/tmux-a2a-postman

USE FOR: Audit tmux-a2a-postman config, postman.md topology and syntax, node templates, skill_path catalogs, and postman.md versus SKILL.md boundaries. Use when reviewing or fixing postman.toml, postman.md, nodes/*, Mermaid edges, ui_node, dead-letter routes, unread backlogs, skill catalog triggers, or node renames. DO NOT USE FOR: generic CLI help; run tmux-a2a-postman help.

2026-07-106

postman-send-message

i9wa4/tmux-a2a-postman

USE FOR: MUST LOAD before first-contact or initial send-heredoc messages; preserves body text and blocks post-send polling. DO NOT USE FOR: waiting, polling, inbox reads, session work, or status after a send.

2026-07-076

postman-session-operator

MUST load after sending or live mailbox/session work; first contact uses postman-send-message.

1. USE FOR / Procedure

Do not poll. After sends or delegated work, wait passively for notification, exact reply, timeout/watchdog boundary, explicit user status request, or concrete delivery trouble.

pop is only for explicit notification/current evidence of mail; never run repeated pop or sleep/pop loops.

Bounded status is only for explicit user status request, watchdog boundary, or concrete delivery trouble; never use status as a heartbeat.

tmux-a2a-postman inspect-message --id <message_id> is read-only historical lookup. Use --path for the stored Markdown path and --body for sender-authored body text.

After every successful pop with status=message, read the complete archived Markdown body before any handling, routing, reply, status decision, or no-action or no-op decision. messageType: ping, replyPolicy: none, and other metadata do not allow skipping the body. truncated command output does not count as a complete read.

Both send-heredoc and pop output a submit_path field (daemon-submit or post) identifying whether daemon mediation was used or bypassed by direct filesystem access. This applies to all output including empty pop results. Use submit_path to audit fallback behavior.

Filling an input request closes transport, not task acceptance. After any exact reply, check send JSON fill, required_input, and notice. DONE/completion or BLOCKED/task-acceptance replies require Task artifact: <artifact-reference>, Original checklist: PASS, evidence, and Remaining blockers: none. Use BLOCKED with Original checklist: FAIL.

Receivers verify checklist status, durable references, evidence, and blockers before relaying, approving, or closing work.

Pane ids require exact tmux verification; missing panes are stale evidence. Dead letters, missing routes, or stale topology go to postman-config-auditor. More detail: Session Flow.