home-assistant-best-practices

name	home-assistant-best-practices
description	Best practices for Home Assistant automations, helpers, scripts, device controls, and Lovelace dashboard configuration. TRIGGER THIS SKILL WHEN: - Creating or editing HA automations, scripts, or scenes - Choosing between template sensors and built-in helpers - Writing or restructuring triggers, conditions, or automation modes - Setting up Zigbee button/remote automations (ZHA or Zigbee2MQTT) - Renaming entities or migrating device_id references to entity_id - Configuring Lovelace dashboard cards and selecting the right sensor or helper to feed them SYMPTOMS THAT TRIGGER THIS SKILL: - Agent uses Jinja2 templates where native conditions, triggers, or helpers exist - Agent uses device_id instead of entity_id in triggers/actions - Agent modifies entity IDs or config objects without checking all consumers - Agent chooses wrong automation mode (e.g., single for motion lights) - Agent hard-codes min/max values or picks a raw sensor when a derived helper is more appropriate for a dashboard card
metadata	{"version":"1.1.0"}

Home Assistant Best Practices

Core principle: Use native Home Assistant constructs wherever possible. Templates bypass validation, fail silently at runtime, and make debugging opaque.

Decision Workflow

Follow this sequence when creating any automation:

0. Gate: modifying existing config?

If your change affects entity IDs or cross-component references — renaming entities, replacing template sensors with helpers, converting device triggers, or restructuring automations — read references/safe-refactoring.md first. That reference covers impact analysis, device-sibling discovery, and post-change verification. Complete its workflow before proceeding.

Steps 1-5 below apply to new config or pattern evaluation.

1. Check for native condition/trigger

Before writing any template, check references/automation-patterns.md for native alternatives.

Common substitutions:

• {{ states('x') | float > 25 }} → numeric_state condition with above: 25
• {{ is_state('x', 'on') and is_state('y', 'on') }} → condition: and with state conditions
• {{ now().hour >= 9 }} → condition: time with after: "09:00:00"
• wait_template: "{{ is_state(...) }}" → wait_for_trigger with state trigger (caveat: different behavior when state is already true — see references/safe-refactoring.md#trigger-restructuring)

2. Check for built-in helper or Template Helper

Before creating a template sensor, check references/helper-selection.md.

Common substitutions:

• Sum/average multiple sensors → min_max integration
• Binary any-on/all-on logic → group helper
• Rate of change → derivative integration
• Cross threshold detection → threshold integration
• Consumption tracking → utility_meter helper

If no built-in helper fits, use a Template Helper — not YAML. Create it via the HA config flow (MCP tool or API) or via the UI: Settings → Devices & Services → Helpers → Create Helper → Template. Only write template: YAML if explicitly requested or if neither path is available.

3. Select correct automation mode

Default single mode is often wrong. See references/automation-patterns.md#automation-modes.

Scenario	Mode
Motion light with timeout	restart
Sequential processing (door locks)	queued
Independent per-entity actions	parallel
One-shot notifications	single

4. Use entity_id over device_id

device_id breaks when devices are re-added. See references/device-control.md.

Exception: Zigbee2MQTT autodiscovered device triggers are acceptable.

5. For Zigbee buttons/remotes

• ZHA: Use event trigger with device_ieee (persistent)
• Z2M: Use device trigger (autodiscovered) or mqtt trigger

See references/device-control.md#zigbee-buttonremote-patterns.

---

Critical Anti-Patterns

Anti-pattern	Use instead	Why	Reference
condition: template with float > 25	condition: numeric_state	Validated at load, not runtime	references/automation-patterns.md#native-conditions
wait_template: "{{ is_state(...) }}"	wait_for_trigger with state trigger	Event-driven, not polling; waits for change (see references/safe-refactoring.md#trigger-restructuring for semantic differences)	references/automation-patterns.md#wait-actions
device_id in triggers	entity_id (or device_ieee for ZHA)	device_id breaks on re-add	references/device-control.md#entity-id-vs-device-id
mode: single for motion lights	mode: restart	Re-triggers must reset the timer	references/automation-patterns.md#automation-modes
Template sensor for sum/mean	min_max helper	Declarative, handles unavailable states	references/helper-selection.md#numeric-aggregation
Template binary sensor with threshold	threshold helper	Built-in hysteresis support	references/helper-selection.md#threshold
Renaming entity IDs without impact analysis	Follow references/safe-refactoring.md workflow	Renames break dashboards, scripts, and scenes silently	references/safe-refactoring.md#entity-renames
template: sensor/binary sensor in YAML	Template Helper (UI or config flow API)	Requires file edit and config reload; harder to manage	references/template-guidelines.md

---

Reference Files

Read these when you need detailed information:

File	When to read	Key sections
references/safe-refactoring.md	Renaming entities, replacing helpers, restructuring automations, or any modification to existing config	#universal-workflow, #entity-renames, #helper-replacements, #trigger-restructuring
references/automation-patterns.md	Writing triggers, conditions, waits, or choosing automation modes	#native-conditions, #trigger-types, #wait-actions, #automation-modes, #ifthen-vs-choose, #trigger-ids
references/helper-selection.md	Deciding whether to use a built-in helper vs template sensor	#numeric-aggregation, #rate-and-change, #time-based-tracking, #counting-and-timing, #scheduling, #entity-grouping, #decision-matrix
references/template-guidelines.md	Confirming templates ARE appropriate for a use case	#when-templates-are-appropriate, #when-to-avoid-templates, #template-sensor-best-practices, #common-patterns, #error-handling
references/device-control.md	Writing service calls, Zigbee button automations, or using target:	#entity-id-vs-device-id, #service-calls-best-practices, #zigbee-buttonremote-patterns, #domain-specific-patterns
references/examples.yaml	Need compound examples combining multiple best practices	—