flipper-notify

name	flipper-notify
description	Send a custom sound, vibration, and text notification to the Flipper Zero via the flipper-claude-buddy bridge daemon (requires the bridge to be running).
allowed-tools	Bash

Flipper Zero Notify

Send a notification to the connected Flipper Zero via the host bridge daemon.

The bridge listens on a Unix socket at /tmp/claude-flipper-bridge.sock.

Notify (sound + vibration + two-line text)

echo '{"action":"notify","sound":"SOUND","vibro":VIBRO,"text":"TITLE","subtext":"SUBTITLE"}' \
  | nc -U /tmp/claude-flipper-bridge.sock

• SOUND — one of the sound names below
• VIBRO — true to vibrate, false for silent
• TITLE / SUBTITLE — up to 20 characters each; omit or leave empty if not needed

Sound reference

Sound	Description
success	Ascending C5-E5-G5 chime + green flash
error	Low double beep G4-G4 + red flash
alert	Single E5 blip + cyan flash
ready	Ascending C5-E5-G5 + cyan flash
connect	Startup chord C5-E5-G5-C6 + green solid (persistent)
disconnect	Shutdown chord C6-G5-E5-C5 + red flash
interrupt	Descending E5-C5 + yellow solid (persistent)
session_end	Descending C6-G5-E5-C5 + yellow flash
led_working	Blue solid LED, no sound (persistent)
led_off	Turn LED off, no sound
voice_start	High ding A5 + red blink (persistent)
voice_start_led	Red blink only, no sound (persistent)
voice_stop	Low dong C5 + red flash then LED off
voice_stop_quiet	LED reset only, no sound

Examples

Task completed:

echo '{"action":"notify","sound":"success","vibro":true,"text":"Done","subtext":"Tests passed"}' \
  | nc -U /tmp/claude-flipper-bridge.sock

Error occurred:

echo '{"action":"notify","sound":"error","vibro":true,"text":"Build failed","subtext":""}' \
  | nc -U /tmp/claude-flipper-bridge.sock

Silent status update:

echo '{"action":"notify","sound":"alert","vibro":false,"text":"Thinking...","subtext":""}' \
  | nc -U /tmp/claude-flipper-bridge.sock

Rules

• Keep text under 20 characters per line
• Use success for completions, error for failures, alert for information
• Use vibro: true for important notifications that need immediate attention
• Sounds marked "persistent" leave the LED on until the next notification resets it
• If the bridge is not running, nc will exit silently with no error shown to the user