latex-empirical-tables

name	latex-empirical-tables
description	Set up, format, fix, and clean up LaTeX regression and estimation tables in empirical economics or finance papers. Use when (a) creating a .tex, results.tex, main.tex, or preamble to display regression or estimation output from Python (pyfixest), Stata, or R — including any mention of estout, esttab, estauto, estwide, or table fragments; (b) formatting or repairing estout-style regression tables that overflow the right margin, have cramped or boxed notes, misaligned columns, or poor significance stars, or when asked to match a reference paper, make the note fill the table width, or choose among \estwide, \estauto, and landscape layouts; (c) diagnosing "Misplaced \omit" errors from \input-ed table fragments inside tabular environments. Covers \@@input, \estwide, \estauto, \estautoLT, \specialcell, \sym, minipage notes below tabulars, and the convert-and-verify workflow. Do NOT trigger for general LaTeX documents like beamer presentations, problem sets, letters, or CVs.
metadata	{"author":"Claude Code","version":"1.0.0","date":"2026-07-03T00:00:00.000Z","consolidates":"Merges estout-table-formatting, latex-results-preamble, and latex-input-multicolumn-omit-fix into one skill."}

LaTeX Empirical Tables

Empirical economics and finance papers export regression and estimation output as estout/esttab "body fragments" — rows of \multicolumn headers, coefficients with \sym stars, and parenthesised p-values or SEs, with no \toprule/\bottomrule — pulled into the manuscript through a wrapper macro (\estauto/\estwide/\estautoLT). Done well this reads like a top-journal table. Done naively it looks broken: wide tables spill past the right margin, the note legend is jammed inside the tabular as a boxed cell, columns sit at uneven widths, and \input-ed fragments throw "Misplaced \omit". This skill sets a results .tex up from scratch, converts ugly estout tables to the gold-standard pattern, and diagnoses the \omit error. The reasoning behind each choice is given so you can adapt rather than copy blindly.

Routing

You want to...	Go to
Set up results.tex/main.tex and its preamble from scratch	Section A
Fix or reformat existing estout tables (overflow, cramped notes, stars, alignment)	Section B
Diagnose a "Misplaced \omit" error from an \input-ed fragment	Section C

---

Section A — Build a results document from scratch

When producing regression or estimation tables, follow this workflow to create a compilable LaTeX document with a standard empirical-economics preamble and estout macros.

Directory structure

All output lives under outline/ relative to the project root:

outline/
├── preamble/
│   └── preamble.tex    ← LaTeX preamble (no \begin{document})
├── Tables/
│   ├── table_01.tex    ← table fragments (auto-increment)
│   ├── table_02.tex
│   └── ...
├── Figures/
│   └── ...             ← figures (.pdf, .png, etc.)
└── results.tex         ← master document (created on first table)

Step-by-step workflow

1. Ensure directories exist

Create outline/preamble/ and outline/Tables/ if they don't already exist. Also create outline/Figures/ if figures will be produced.

2. Save the preamble

Copy references/preamble.tex from this skill's directory to outline/preamble/preamble.tex. This file contains everything up to but NOT including \begin{document} — the document class, all packages, and the estout macro definitions (\estauto, \estwide, \estautoLT, \sym, \specialcell). The macros are defined there in full; Section B lists a minimal subset if you only need to graft them onto an existing preamble.

Do NOT create outline/results.tex yet — it gets created automatically when the first table is generated.

3. When producing a table

Each time a regression or summary table is generated:

1. Save the table fragment to outline/Tables/table_XX.tex with auto-incrementing numbering (01, 02, 03, ...).

2. If outline/results.tex does not exist, create it:

   \input{preamble/preamble}
   
   \begin{document}
   
   \section{Tables}
   
   \subsection{Descriptive Title}
   \begin{table}[H]
   \caption{Descriptive Title}
   \centering
   \estauto{Tables/table_01.tex}{N}{D{.}{.}{-1}}
   \end{table}
   \FloatBarrier
   
   \end{document}
   

3. If outline/results.tex already exists, insert the following block BEFORE \end{document}:

   \subsection{Descriptive Title}
   \begin{table}[H]
   \caption{Descriptive Title}
   \centering
   \estauto{Tables/table_XX.tex}{N}{D{.}{.}{-1}}
   \end{table}
   \FloatBarrier
   

Where N = number of data columns in the fragment (excluding the label column).

Estout table macros

Three macros are defined in the preamble for including table fragments generated by any tool (pyfixest, esttab, R, etc.). All use the TeX primitive \@@input to avoid \multicolumn/\omit errors (Section C explains why this matters).

Macro	Use case	Environment
\estauto{file}{ncols}{colspec}	Standard-width tables	tabular
\estwide{file}{ncols}{colspec}	Full-page-width tables	tabular*
\estautoLT{file}{ncols}{colspec}	Multi-page tables	longtable

The default column spec is D{.}{.}{-1} (decimal-aligned via dcolumn). Use c only when columns contain non-numeric content.

Table fragment format

Fragments must follow these conventions — the wrapper macros add \toprule and \bottomrule, so fragments should NOT include them.

Structure:

• Column headers: \multicolumn{1}{c}{(1)} style
• Group headers: \multicolumn{N}{c}{Group Name} with \cmidrule(lr){start-end}
• Coefficients right-aligned, p-values in parentheses on the next line
• Significance: \sym{*} p<0.10, \sym{**} p<0.05, \sym{***} p<0.01
• Multi-line variable names: \specialcell{Line1 \\ Line2}
• \addlinespace between variable blocks
• \midrule before summary statistics
• Yes/No rows: \multicolumn{1}{c}{Yes}
• Numeric summary stats: raw numbers, no \multicolumn wrapper
• Do NOT end with a trailing \\ (the macro appends \\ \bottomrule)

Because the wrapper expands the TeX primitive \@@input rather than \input, a fragment may begin with \multicolumn spanning all columns without error; Section C explains why that matters and what to do if a house preamble expands plain \input instead.

Example fragment:

                    &\multicolumn{2}{c}{OLS}                    &\multicolumn{2}{c}{IV}                     \\\cmidrule(lr){2-3}\cmidrule(lr){4-5}
                    &\multicolumn{1}{c}{(1)}         &\multicolumn{1}{c}{(2)}         &\multicolumn{1}{c}{(3)}         &\multicolumn{1}{c}{(4)}         \\
\midrule
Treatment           &       0.245\sym{**} &       0.312\sym{***}&       0.198\sym{*}  &       0.267\sym{**} \\
                    &     (0.024)         &     (0.003)         &     (0.087)         &     (0.041)         \\
\addlinespace
Control Variable    &      -0.031         &      -0.045         &      -0.028         &      -0.039         \\
                    &     (0.542)         &     (0.388)         &     (0.601)         &     (0.452)         \\
\midrule
Observations        &        1500         &        1500         &        1500         &        1500         \\
Firm FE             &\multicolumn{1}{c}{Yes}         &\multicolumn{1}{c}{No}          &\multicolumn{1}{c}{Yes}         &\multicolumn{1}{c}{No}          \\
Year FE             &\multicolumn{1}{c}{Yes}         &\multicolumn{1}{c}{Yes}         &\multicolumn{1}{c}{Yes}         &\multicolumn{1}{c}{Yes}         \\
Adjusted R-Sq       &       0.342         &       0.215         &                     &                     \\
F Statistic         &      12.450         &       8.320         &                     &                     \\

Optional: Bibliography support

If the document needs references, add this to outline/preamble/preamble.tex (before the end of the file):

% --- References (biblatex + biber, APA) ---
\usepackage[numbib]{tocbibind}
\usepackage[
  backend=biber,
  style=apa,
  backref=true,
]{biblatex}
\addbibresource{references.bib}
\renewcommand*{\bibfont}{\setstretch{1.2}}
\setlength\bibitemsep{1em}

---

Section B — Fix or reformat existing tables

The gold-standard pattern and the procedure to convert an ugly set of estout tables to it. Read references/conversion-example.md for a full before/after.

What good looks like (the four practices)

1. Wrapper macros use the TeX primitive \@@input, not \input. estout fragments typically start with \multicolumn{...}, whose internal \omit must be the first token in the cell; LaTeX's \input wraps the file read in non-expandable file-existence checks that execute in that first cell, so the fragment throws "Misplaced \omit". The primitive \@@input (inside \makeatletter … \makeatother) does not, so the fragment renders. Section C gives the full root cause and the before/after fix.

2. Wide tables fill \textwidth via \estwide (a tabular*). A plain \begin{tabular} sizes to its natural content width — fine for 2–3 narrow columns, but a 5–6 column regression table overflows the margin (you see Overfull \hbox on the table rows and the right edge runs off the page). \estwide uses \begin{tabular*}{\textwidth}{@{\hskip\tabcolsep\extracolsep\fill}l*{N}{c}} so the inter-column glue (\extracolsep\fill) spreads the columns to exactly \textwidth. The table now fits and the columns are evenly distributed.

3. Notes live OUTSIDE the tabular, in a \minipage below it. This is the single most common defect. Putting the legend inside the fragment as a \multicolumn{N}{l}{\footnotesize ...} row makes the note part of the ruled box, clamps it to the table's width, and breaks awkwardly. Instead, strip those rows out of the fragment and place the note in a \begin{minipage}{\textwidth}\footnotesize{Note: ...}\end{minipage} below the \estwide/\estauto call. The note then spans the text block, wraps cleanly, and reads like a journal table note. If the float wraps the table in \resizebox{..\textwidth}{!}{...}, the \minipage note goes outside that box — a note left inside is scaled with the table to a tiny font and clamped to the table width (the "the note doesn't fill the page" complaint). See "Special case" below.

4. Each table float is consistent: \begin{table}[!htbp] (or [H]), \caption{...}, \label{...}, \centering, the \estwide/\estauto call, then the \minipage note, then \end{table}. Multi-line column headers use \specialcell{...}; grouped columns get \cmidrule(lr){a-b}.

The macros (minimal block to add to an existing preamble)

Add these once to an existing preamble. They require booktabs (for \toprule/\midrule/\bottomrule/\cmidrule). \estwide and \estauto are siblings; keep BOTH so you can pick per table. (Section A's references/preamble.tex already contains these plus \estautoLT.)

\makeatletter
% Natural-width estout table. \@@input (TeX primitive) lets a fragment that
% starts with \multicolumn render without a "Misplaced \omit" error.
\newcommand{\estauto}[3]{%
  \vspace{.75ex}{%
    \begin{tabular}{l*{#2}{#3}}\toprule\@@input #1 %
    \\ \bottomrule
    \addlinespace[.75ex]
    \end{tabular}%
  }%
}
% Full-\textwidth estout table: a tabular* whose \extracolsep\fill spreads the
% columns to fill the page, so a wide table stops overflowing the margin.
\newcommand{\estwide}[3]{%
  \vspace{.75ex}{%
    \begin{tabular*}{\textwidth}{@{\hskip\tabcolsep\extracolsep\fill}l*{#2}{#3}}\toprule\@@input #1 %
    \\ \bottomrule
    \addlinespace[.75ex]
    \end{tabular*}%
  }%
}
\makeatother
% Multi-line column headers inside a single cell: \specialcell{line1\\line2}.
\newcommand{\specialcell}[2][c]{\begin{tabular}[#1]{@{}c@{}}#2\end{tabular}}
% Significance stars that don't widen the column (overlap to the right).
\newcommand{\sym}[1]{\rlap{#1}}

#1 = fragment path, #2 = number of data columns, #3 = column type (c, or a dcolumn D{.}{.}{-1} spec for decimal alignment). The second argument MUST equal the fragment's data-column count.

The table float pattern

\begin{table}[!htbp]
\caption{Difference-in-Differences: Board Independence}
\label{tab:h1_did}
\centering
\estwide{Tables/table_02.tex}{4}{c}
\begin{minipage}{\textwidth}
\footnotesize{Note: \sym{***} $p<0.01$, \sym{**} $p<0.05$, \sym{*} $p<0.10$. Values in parentheses are $p$-values. The panel estimates difference-in-differences effects on board independence across sample windows, with controls, firm and year fixed effects, and firm-clustered inference.}
\end{minipage}
\end{table}

For a table that should occupy its own page, follow \end{table} with \vspace*{\fill} then \clearpage. For a table too wide even for \estwide, wrap the call in \begin{landscape} ... \resizebox{1.0\linewidth}{!}{\estauto{...}} ... \end{landscape} (landscape needs pdflscape/lscape).

Choosing the wrapper

• \estwide — the default for regression and summary tables with ≥4 data columns, or any table that overflows the margin. Fills \textwidth.
• \estauto — genuinely narrow tables (2–3 columns, e.g. a year-by-year event study), where stretching to full width would leave absurd gaps.
• landscape + \resizebox — very wide tables (many columns / long headers) that won't fit even rotated at natural size. \resizebox scales the font, so prefer \estwide whenever it fits; reserve \resizebox for the genuinely huge.

Special case: a self-contained tabular \input-ed with its note inside

The worst-formatted table in a paper is often the one that escaped the \estauto/\estwide convention entirely: a fragment that is a complete tabular — its own \begin{tabular}{...}, \toprule, \bottomrule, \end{tabular}, and the note baked in as a final \multicolumn{N}{p{...}}{\footnotesize ...} row — pulled into the manuscript with a plain \input{...}, frequently wrapped in \resizebox{0.99\textwidth}{!}{ \input{...} }.

Detection (grep the manuscript for \input{Tables/ or \input{Online Appendix/, then open the fragment): the fragment contains \begin{tabular}…\end{tabular} with \toprule/\bottomrule, its last content row is a \multicolumn{N}{...}{\footnotesize ...} note, and the float wraps it in \resizebox{...}{!}{ \input{...} }. Every other regression table in the same paper instead uses \estauto{...}{N}{c} (or \estwide) with the note in a \minipage — so this one is the outlier.

Why it looks broken: \resizebox scales the whole box, so a note living inside the tabular is shrunk to a tiny font and clamped to the tabular's width — it no longer matches the table that fills the page. That is exactly the "the note doesn't adhere to / doesn't fill the page" complaint. (Even without \resizebox, an in-tabular \multicolumn{N}{p{0.97\linewidth}} note is a ruled-box cell — practice 3.)

Fix — convert it to the house pattern, matching a sibling table in the SAME manuscript (read one sibling's float and its fragment first, to copy the column count, note wording, and trailing convention):

1. Make the fragment body-only. Delete \begin{tabular}{...}, \toprule, the \bottomrule, \end{tabular}, and the \multicolumn{N}{...}{...} note row. Keep the column-header rows, \cmidrules, \midrules, data rows, and the scalar rows (Observations, $R^2$, control-indicator rows). Match the sibling fragments' trailing convention — in many house preambles the last data row ends with \\ and the wrapper appends its own \\ \bottomrule, so a trailing \\ is correct there even though a bare body fragment usually omits it. (If you generate the fragment from a script, edit the emitter to stop writing the wrapper and the note, not the manuscript by hand.)
2. Switch the manuscript call from \input{Tables/X.tex} to \estauto{Tables/X.tex}{N}{c} (or \estwide), with N = the fragment's data-column count. Keep any surrounding \resizebox.
3. Move the note into a \minipage placed below and outside the \resizebox{...}{!}{...} so it renders at full \footnotesize/\textwidth, copying the wording style (and the "* significant at the 10% level; … We cluster standard-errors at …" closing) of a sibling table's note. State the winsorization and any sample restriction here if the project requires it.
4. Recompile and verify (below); confirm no Misplaced \omit and that the note now spans the page under the table.

The \input vs \@@input caveat. If the wrapper expands \input / \estinput (some house preambles do \let\estinput=\input) rather than \@@input, the body fragment must start with an empty leading cell — & \multicolumn{...} — so the first token after \toprule is not \multicolumn's \omit; otherwise the wrapper throws "Misplaced \omit" and you must switch it to \@@input (practice 1). estout's own output already starts with that empty cell, which is why these fragments compile under a plain-\input wrapper.

Conversion procedure (ugly estout tables → gold standard)

This is the exact sequence that works. Read references/conversion-example.md for a full before/after.

1. Find a gold-standard reference if the user names one (a prior paper of theirs that is formatted well). Read its preamble macros and a couple of its \begin{table} blocks to match house style (note wording, column-group rules, header style). If none is named, use the pattern above.
2. Add \estwide and \specialcell to the preamble, keeping \@@input (do not "simplify" to \input — it reintroduces the \omit error). Confirm booktabs and (if using decimal alignment) dcolumn are loaded.
3. Switch wide \estauto{...} calls to \estwide{...} in the manuscript, per the decision rule. Keep the second argument (column count) unchanged.
4. Relocate the notes. In each fragment, delete the explanatory legend rows — the \midrule + \multicolumn{N}{l}{\footnotesize ... $p$-values ... \sym ...} lines and any other purely-descriptive \multicolumn{...}{\footnotesize ...} rows. Keep panel headers (\multicolumn{N}{l}{\textbf{Panel A: ...}}), data rows, \midrules, and column-header rows. Then add a \minipage note below each table in the manuscript, folding the deleted legend plus one accurate descriptive sentence (DV, controls, fixed effects, clustering, sample) into it. Pull the description from the deleted note and the surrounding prose — never invent a result.
5. Add \centering and a \label to any float missing them (prose \refs depend on existing label names — keep them).
6. Freeze every number. Do not touch a coefficient, SE, p-value, significance star, sample size, or panel. Formatting only.
7. Compile and verify (below).

Verification (do not claim done until these pass)

Run pdflatex → bibtex → pdflatex → pdflatex, then confirm:

• 0 errors: grep -E "^!|:[0-9]+:" main.log is empty (in particular no "Misplaced \omit", which means a fragment is being \input not \@@input).
• 0 undefined references/citations.
• No large table overflow: the Overfull \hbox warnings on table rows are gone (a few-pt overfull on a prose line is fine; tens of pt on a table row is not). grep -cE "Overfull \\\\hbox \\([2-9][0-9]" main.log should be ~0 for table lines.
• Numbers unchanged: if the project has a star/p-value validator (e.g. scripts/validate_stars.py), it must still report ALL PASS. Otherwise diff each fragment against a backup and confirm the only removed lines are the legend rows.

Always back up main.tex and the Tables/ fragments before editing, since the edits touch many files.

---

Section C — Diagnose "Misplaced \omit"

Problem

When using \input (or a macro aliased to \input) to include table fragment files inside a tabular environment, LaTeX throws ! Misplaced \omit errors if the fragment file starts with \multicolumn. The same table content works perfectly when written inline (without \input). This commonly occurs with estout-style table macros (e.g., \estauto) that wrap \input-ed fragments in \begin{tabular}...\toprule...\input{file}...\bottomrule...\end{tabular}.

Context / Trigger Conditions

• Error message: ! Misplaced \omit. followed by \multispan ->\omit
• Scenario: A tabular environment uses \input{file.tex} where the file starts with \multicolumn{N}{...}{...}
• Pattern: Multi-panel tables with \multicolumn{N}{l}{\textbf{Panel A:...}} as the first content line fail, while single-panel tables starting with & \multicolumn{1}{c}{(1)} & ... succeed (because \omit is in the second cell, not the first)
• Key diagnostic: The exact same table content compiles without error when pasted inline instead of \input-ed

Root Cause

LaTeX's \input command is NOT the TeX primitive. LaTeX redefines \input to wrap the primitive (\@@input) with:

• File existence checks (\InputIfFileExists)
• Path resolution
• Nested input tracking

These wrapper operations are non-expandable and execute as content in the first table cell. Once any content has been processed in a cell, \multicolumn's internal \omit command (which must be the absolute first token in a cell) is rejected by TeX's alignment mechanism.

Why some tables work: Fragments starting with & \multicolumn{1}{c}{...} put \omit in the second cell (after &), where it IS the first token. Only fragments where \multicolumn spanning all columns is the very first token trigger the error.

Solution

Replace LaTeX's \input with the TeX primitive \@@input in the table macro. The primitive is fully expandable and injects no tokens before the file content.

Before (broken):

\newcommand{\estauto}[3]{
    \vspace{.75ex}{
        \begin{tabular}{l*{#2}{#3}}
        \toprule
        \estinput{#1}
        \\ \bottomrule
        \addlinespace[.75ex]
        \end{tabular}
    }
}
\let\estinput=\input

After (fixed):

\makeatletter
\newcommand{\estauto}[3]{%
    \vspace{.75ex}{%
        \begin{tabular}{l*{#2}{#3}}\toprule\@@input #1 %
        \\ \bottomrule
        \addlinespace[.75ex]
        \end{tabular}%
    }%
}
\makeatother

Key details of the fix:

1. \@@input instead of \input: The TeX primitive is fully expandable, so it injects no tokens before the file content. Requires \makeatletter / \makeatother since the name contains @.

2. Syntax: \@@input #1 (space-terminated filename, no braces). The trailing space after #1 is the filename terminator for the primitive.

3. Same line: \toprule\@@input #1 % keeps everything on one line with % eating the trailing newline, preventing whitespace tokens between \toprule and the file content.

4. % after lines: Add % at end of macro definition lines to prevent newline-generated space tokens from entering the tabular cells.

Also fix: trailing \\ in fragments

When using an \estauto-style macro that appends \\ \bottomrule after the input, ensure table fragment files do NOT end with \\ on their last line. Double \\ before \bottomrule creates an empty row where \bottomrule's internal \omit/\multispan also fails.

Verification

1. Compile with pdflatex -interaction=nonstopmode
2. Check log: grep "^!" results.log should return nothing
3. Previously failing multi-panel tables now compile cleanly
4. PDF output should be visually identical

Notes

• This is a fundamental TeX/LaTeX interaction issue, not specific to any particular package or document class
• The booktabs package (\toprule, \midrule, \bottomrule) is NOT the cause, though it commonly appears in the error context
• The issue affects ANY \input inside a tabular where \multicolumn is the first token, regardless of \toprule
• MiKTeX, TeX Live, and other distributions are all affected
• \let\estinput=\input does NOT help because it aliases LaTeX's redefined \input, not the primitive
• In nonstopmode, TeX ignores the error and produces correct output, but the errors halt compilation in interactive/scrollmode (the default)