القائمة
Raspberry Pi Zero 2 W - LED Boot Indicator Setup. TIL note about linux. Use when working with linux and the user mentions rpi zero2w led setup or related topics.
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Back up a data directory to a remote host automatically whenever it changes, using inotify + rsync as a systemd user service. TIL note about linux. Use when working with linux and the user mentions event-driven backup, inotify rsync, watch-and-sync, or scheduled/continuous backups.
Show CPU temperature in the tmux status bar via the Dracula theme, with dynamic color based on the value, on Linux (desktops, servers, SBCs). Update-safe — uses /sys/class/thermal/ sysfs and does not patch the dracula plugin. Use when working with tmux on any Linux box and the user mentions adding a CPU temp segment to the tmux status line.
Show CPU temperature in the tmux status bar via the Dracula theme, with dynamic color based on the value (cold/normal/warm/hot), in an update-safe way. macOS (Apple Silicon) version using smctemp. Use when working with tmux, dracula/tmux, or the user mentions adding a CPU temp segment to the tmux status line on a Mac.
Install the Pi coding agent. TIL note about ai. Use when working with ai and the user mentions pi coding agent or related topics.
Use FFMPEG to cut and concatenate MP4 files. TIL note about ffmpeg. Use when working with ffmpeg and the user mentions cut cat mp4 or related topics.
Resize video file using ffmpeg. TIL note about ffmpeg. Use when working with ffmpeg and the user mentions resize video or related topics.
| name | linux-rpi-zero2w-led-setup |
| description | Raspberry Pi Zero 2 W - LED Boot Indicator Setup. TIL note about linux. Use when working with linux and the user mentions rpi zero2w led setup or related topics. |
Configures LED behavior:
/boot/firmware/config.txt:dtparam=act_led_trigger=mmc0
/etc/systemd/system/led-boot-done.service:[Unit]
Description=Set ACT LED solid on after boot
After=multi-user.target
[Service]
Type=oneshot
ExecStart=/bin/sh -c 'echo default-on > /sys/class/leds/ACT/trigger || echo default-on > /sys/class/leds/led0/trigger'
RemainAfterExit=yes
[Install]
WantedBy=multi-user.target
sudo systemctl enable led-boot-done.service
none - LED offheartbeat - Blinks like a heartbeatmmc0 - Blinks on SD card activitycpu - Blinks based on CPU activitydefault-on - Always on