name: assist:mise
description: Morning prep sync for Forni's workstation. Pulls latest in ~/Eudaimonia and ~/Eudaimonia/Craft/Development/personal/homebase, then runs homebase's setup.sh to deploy dotfiles and refresh brew, npm globals, IDE extensions, and Claude plugins. Use this skill whenever Forni says "mise", "mise en place", "prep the station", "morning sync", "get the station ready", or otherwise wants his dev environment neat and tidy before the day's work. Also trigger for "/assist:mise". Named after mise en place: everything in its place before service.
allowed-tools:
- Bash(git:*)
- Bash(test:*)
- Bash(date:*)
- Bash(./setup.sh:*)
- Bash(./bin/sync-marketplaces:*)
- Read
- Skill
Mise
Morning prep. Get the station ready for the day's work.
Two repos, one setup script. The skill exists because Forni was running the same three commands by hand every morning: git pull in Eudy, git pull in homebase, ./setup.sh. That is a routine, and routines should be automations.
Before Every Invocation
- Read this skill's local
learned-rules.md. It overrides anything below.
- Read the plugin-wide
../../learned-rules.md for any cross-skill corrections that also apply.
Repos
| Shorthand | Absolute path |
|---|
| Eudy | $HOME/Eudaimonia |
| Homebase | $HOME/Eudaimonia/Craft/Development/personal/homebase |
Both are git repos. Homebase contains the authoritative setup.sh that deploys configs and refreshes tooling.
Workflow
Step 0: Preflight
Refuse to run if either target repo is a linked worktree. A worktree signals in-progress work on an isolated branch; mise's branch logic would either fight that context or silently do the wrong thing. The check must be scoped to each target repo — the session's cwd can be anywhere, so a bare git rev-parse might miss a worktree on a repo mise is about to touch.
For each $REPO (Eudy and Homebase), detect via:
test "$(git -C "$REPO" rev-parse --git-dir 2>/dev/null)" = "$(git -C "$REPO" rev-parse --git-common-dir 2>/dev/null)"
If the two paths differ for either repo, that repo is a linked worktree. Abort with a short note telling Forni which repo is in a worktree and to ExitWorktree first.
Step 1: Sync Eudy
Run the sync routine below against $HOME/Eudaimonia. See Sync Routine.
If sync produces a merge conflict, stop mise. Do not continue to homebase or setup.sh. Report the conflict so Forni can resolve it.
Step 2: Sync Homebase
Run the same sync routine against $HOME/Eudaimonia/Craft/Development/personal/homebase.
Same conflict handling: stop on conflict, do not proceed to setup.sh.
Step 3: Sync All Marketplace Clones
setup.sh installs Claude plugins from cached marketplace clones at ~/.claude/plugins/marketplaces/, not from source repos directly. If any clone lags behind its remote, setup.sh installs stale plugin contents and recently merged skills do not appear after Claude Code restarts. Claude Code does not auto refresh these clones; mise owns keeping them current.
This sync is purely mechanical, so it lives in a committed script rather than in this prose. Run it from the homebase path:
./bin/sync-marketplaces
The script iterates every clone, skips non git directories (claude-plugins-official is a flat manifest) and scratch temp_* clones, detects each clone's default branch, fast forwards it, and hard resets to the remote when a clone has drifted. It always exits 0 so one broken clone never blocks the rest, and it prints one status line per clone plus a final aggregate.
Parse its output for the summary. Each line is one of PULLED, CURRENT, RESET, FAIL, or SKIP. Fold the counts into the aggregate marketplace line, and call out by name any clone that reported RESET (drift recovered) or FAIL (could not sync) on its own line so a recovery or breakage stays unmissable. Clean CURRENT/PULLED clones roll into the aggregate without individual lines.
A RESET is safe and expected on occasion: these clones are caches, and anything unique to them is by definition ephemeral state or accidental drift, never real user work. A FAIL means setup.sh may install stale content for that one clone, but the rest install current.
Why this was extracted into a script: the headless run (bin/run-mise) pre-allows a tight tool list, and compound shell loops authored at runtime cannot match a single-prefix allowlist entry like Bash(git:*). The old prose loops were denied on every headless run, which also widened the window for a transient API/socket drop. One allowlisted script call fixes both.
Step 4: Run setup.sh
From the homebase path, run ./setup.sh in the foreground so Forni sees output. If it exits non-zero, capture the tail of stderr and stop; do not retry. setup.sh is idempotent, so the right fix for a transient failure is usually to resolve the root cause and re-run mise, not to auto-retry.
Step 5: Summary
One compact report:
- per repo (Eudy, Homebase): branch name at start, stash applied? (and whether the pop was clean), merge from
origin/main applied? (for non-main case)
- marketplaces: aggregate counts plus one line per clone that needed a reset (called out by name with the reason)
- setup.sh outcome
Keep it short. A handful of lines. If everything was already up to date and setup.sh short-circuited, say so in one line. Per marketplace status only shows up when something noteworthy happened (reset, failure) — clean pulls roll into the aggregate.
Sync Routine
Given a repo path $REPO:
If on main
- Check for dirty tree:
git -C "$REPO" status --porcelain. Remember whether it was dirty.
- If dirty, stash with a tagged message:
git -C "$REPO" stash push -u -m "mise auto-stash $(date -Iseconds)".
git -C "$REPO" pull --ff-only origin main.- If we stashed,
git -C "$REPO" stash pop. If the pop reports conflicts, leave the conflict state, abort mise immediately, and surface the details in the summary — do not attempt to resolve, do not proceed to the next repo, and do not run setup.sh. A conflicted pop means the working tree has unresolved markers; deploying that state via setup.sh would land broken config into $HOME.
If on a non-main branch
The user is mid-feature on this repo. The goal is to preserve any in-flight work, bring main current, and merge main forward so the branch keeps pace.
- Check for dirty tree:
git -C "$REPO" status --porcelain.
- If dirty, delegate to
/sdlc:checkpoint via the Skill tool. That skill handles "save WIP with commit and push, no PR" — exactly what's needed here. /sdlc:checkpoint operates on its caller's cwd, so cd into $REPO first (or otherwise scope the invocation to the right repo) — do not let it run against the wrong directory.
- If clean, skip the checkpoint call entirely.
/sdlc:checkpoint refuses on a clean tree, and invoking it would either error or become a wasted interaction. A clean feature branch (e.g., one with an open PR that's awaiting review) should flow straight to the merge step.
- Fetch and merge main into the current branch:
git -C "$REPO" fetch origin main
git -C "$REPO" merge origin/main
- If the merge surfaces conflicts, leave the branch in the conflicted state and abort mise. Forni resolves the merge; he can rerun mise after.
Why each edge case matters
- Worktree abort: In a worktree, the current session's cwd and branch are deliberately detached from main. Running mise here would either re-sync main in the parent checkout (leaving the worktree diverged) or silently pull the worktree's branch (surprising). Cleaner to refuse.
- Stash-pop over force-reset: Dirty working tree on main is almost always half-finished editing, not intentional divergence. Stash preserves it; pop restores it. Conflict on pop is rare but recoverable.
- Checkpoint + merge-main over rebase: On a feature branch, mise keeps the branch alive and in sync rather than rewriting history. Forni's preference is to preserve WIP commits (even ugly ones) and merge main forward. Rebasing would rewrite what was already pushed by checkpoint.
- Stop on conflict: Running setup.sh on a repo in a conflicted state would deploy half-merged config into
$HOME. Better to stop.
- Pull every marketplace clone: Every clone under
~/.claude/plugins/marketplaces/ is the cache that backs its plugin installs. Skipping pulls means setup.sh installs prior versions of those plugins even when their source repos have newer ones. The first time this matters, Forni notices a freshly merged skill missing after restart; the rule prevents that. This includes external mirrors (superpowers, anthropic skills, etc.) — Claude Code does not auto refresh them.
- Auto reset on drift instead of abort: Marketplace clones are caches, not user work. When a clone has diverged from its remote (local merge artifact from a prior install, history rewrite upstream, etc.), the right move is
reset --hard origin/<default> and log it. Aborting mise leaves the clone permanently stale and forces manual cleanup. The 2026-05-12 incident — ~/.claude/plugins/marketplaces/skillset stuck 235 commits behind on a local merge SHA, sdlc:design running the v2.0.0 instructions with no EnterWorktree call — is exactly what this guards against. Log the reset loudly so Forni sees it happened.
- Don't retry setup.sh: Failures tend to be environmental (sudo, network, brew API). A blind retry masks the cause.
Output Shape
Mise complete ✓
Eudy (main): pulled, already up to date
Homebase (main): pulled 2 commits, stash popped clean
Marketplaces (6 total): 4 pulled, 1 reset (skillset — drift), 1 already current
setup.sh: ✓ (brew cache warm, no changes)
When a marketplace needed a reset, name it and the reason on its own line so the recovery is unmissable:
Marketplaces (6 total): 4 pulled, 1 already current, 1 reset
⚠ skillset: drifted (235 commits behind, local merge artifact), reset to origin/main
Or on partial completion:
Mise aborted after Eudy sync
Eudy (feature-branch): checkpoint pushed, merge from origin/main hit conflicts in
- Craft/write/Substack/draft.md
Homebase: skipped
setup.sh: skipped
Resolve the merge and re-run /assist:mise.
Anti-patterns
- Do not stash on a non-main branch. Use
/sdlc:checkpoint — it commits to the actual branch, which is what Forni expects to find when he resumes.
- Do not modify
origin remotes or branches. mise is a local-station operation.
- Do not skip setup.sh because "nothing changed". Brewfile updates and plugin manifest tweaks are common and cheap to apply.
- Do not surface setup.sh's full stdout in the summary. Point at where the output went; keep the summary scannable.
Learned Rules
(Empty. Populated as Forni corrects mise's judgment over time.)
