Interpret and use `mcpjam` probe, doctor, OAuth, XAA (Cross-App Access / ID-JAG), apps conformance, tools, resources, and prompts output conservatively against MCP 2025-11-25. Use when interacting with MCP servers, executing tools, triaging findings, performing security reviews, debugging enterprise-managed authorization, deciding whether a CLI finding is real or overstated, or turning inspection output into an engineer-facing report with severity and confidence.
Interpret and use `mcpjam` probe, doctor, OAuth, XAA (Cross-App Access / ID-JAG), apps conformance, tools, resources, and prompts output conservatively against MCP 2025-11-25. Use when interacting with MCP servers, executing tools, triaging findings, performing security reviews, debugging enterprise-managed authorization, deciding whether a CLI finding is real or overstated, or turning inspection output into an engineer-facing report with severity and confidence.
MCPJam CLI Investigation
Use this skill when analyzing MCP server behavior from mcpjam or MCP Inspector output. The goal is to separate:
real protocol issues
interoperability warnings
implementation polish
mcpjam or SDK artifacts
Interactive use
When the user wants to connect to a server and use it:
Probe the server first: server probe --url <url> --quiet --format json.
Use the probe to learn auth posture, resource metadata, authorization-server metadata, and registration strategies before assuming the connected surface is public.
If the probe shows oauth_required, authenticate with oauth login --credentials-out <path> or run oauth conformance --credentials-out <path> when the task is specifically to test the OAuth flow.
Tools with _meta.ui.resourceUri, deprecated _meta["ui/resourceUri"], or openai/outputTemplate in toolsMetadata have interactive UI.
For a specific tool, check toolsMetadata.<toolName>._meta.ui.resourceUri, toolsMetadata.<toolName>._meta["ui/resourceUri"], or toolsMetadata.<toolName>["openai/outputTemplate"].
--ui starts or attaches to the local Inspector backend and renders the completed result in App Builder.
In non-TTY, agent, and CI runs, --ui does not open a browser by default. Pass --open when the CLI should open App Builder itself.
--open opens a system browser URL; it does not attach an already-controlled automation browser or make fresh tabs hydrate an injected render. Use --no-open when browser automation already opened Inspector App Builder. Use --attach-only when startup, browser opening, and discovery must all be disallowed.
no_active_client means the Inspector backend may be running but no browser client is attached. If manual recovery is needed, use mcpjam inspector open, not mcpjam inspector start.
unknown_server in the root error.code or an inspectorRender.commands.*.error.code means Inspector could not match the requested server. If the message says App Builder is focused on another server, retry with --server-name <focused-name>.
Treat UI success as inspectorRender.status === "rendered", not exit code 0 alone. If the render is skipped, branch on inspectorRender.remediation or the stable root warning.code.
Use --require-render when the UI render itself is the deliverable and a skipped render should fail the command.
Do not require external screenshots as proof of render success; iframe/canvas content can defeat browser snapshot tools. Prefer inspectorRender.status, command responses, and snapshot evidence.
Use --ui only when the tool has UI metadata or the user explicitly asks to see UI.
When the user asks to investigate, audit, or triage, use the Investigation workflow below.
Default stance
Treat raw request/response evidence as higher trust than normalized CLI convenience output.
Separate observations, compliance issues, and security findings. They are related, but not interchangeable.
Map claims to spec strength: MUST and MUST NOT are strong conformance signals; SHOULD and RECOMMENDED are softer guidance; MAY and optional fields are usually informational.
Do not label a security finding high unless you can support a concrete attacker benefit or clear breakage path.
When evidence is ambiguous, lower confidence or use pending before overstating the conclusion.
Investigation workflow
Start with the narrowest command that actually proves the claim.
If the command may fail, you want a reusable handoff artifact, or CI should retain evidence, add --debug-out <path> to server probe, server validate, tools call, or oauth login.
If the probe shows oauth_required and the task is to inspect the server surface, continue with oauth login or another supported auth flow to obtain reusable credentials before judging post-auth behavior. For multi-command connected sessions, use --credentials-out <path> on oauth login, oauth conformance, or oauth conformance-suite to persist tokens and --credentials-file <path> on later commands; read references/cli-surface-notes.md for access-token-only exceptions. When a token is already available (CI, M2M, env var), prefer a credentials file when possible and pass --access-token or --oauth-access-token only as an escape hatch.
After successful auth, inspect the connected surface with direct commands such as server info, server capabilities, tools list, resources list/read/templates, and prompts list/get.
Use server doctor --out <path> when you need one breadth-first snapshot instead of several single-purpose command outputs.
If the output came from server doctor or a --debug-out artifact, split it into primary command evidence, probe evidence, and connected-sweep evidence.
If the claim is specifically about MCP Apps tool metadata or ui:// resources, start with apps conformance --quiet --format json before dropping to tools list or resources read.
If the claim is about a tool result rendering in Inspector, use tools call --tool-name <name> --tool-args <json|@file|-> --ui --quiet --format json.
In non-TTY runs, add --open if no Inspector browser client is already attached.
If browser automation already opened http://127.0.0.1:6274/#app-builder, add --no-open; --open launches a system browser and may not target the automation-controlled client.
Confirm UI delivery with inspectorRender.status === "rendered". Treat inspectorRender.remediation and stable skipped-render warning.code values as recovery hints, not MCP tool failures.
If unknown_server appears in the root error or command errors and the message names the focused server, retry with --server-name <focused-name>.
Use --require-render when a skipped render should become a hard error instead of a warning.
If a field may be CLI-added or SDK-normalized, read references/cli-surface-notes.md before concluding anything.
If the claim depends on MCP semantics, read references/mcp-2025-11-25-interpretation.md.
If the claim involves Cross-App Access, ID-JAG, or enterprise-managed authorization, read references/xaa-id-jag-interpretation.md before triaging xaa run output.
If the task involves security review, read references/security-best-practices.md for the full checklist and follow the security review workflow below.
Write the result using the output contract below.
Security review workflow
Use this when the task is to assess an MCP server's security posture. All checks use existing CLI commands. No special security tooling is needed. Do not assume every server should require auth.
Phase 1: Observe (read-only)
Run server probe --url <target> --quiet --format json first. Add oauth metadata or server doctor --out <path> only when they clarify the picture.
Record an initial auth signal:
full-auth candidate: probe status is oauth_required
public-or-mixed candidate: probe status is ready
unknown: probe is only reachable, error, or otherwise ambiguous
Capture discovery facts:
OAuth metadata URLs and whether they point to public, private, or suspicious targets
scopes_supported, WWW-Authenticate, and PKCE methods
registration strategies such as dcr, cimd, and preregistered
Record the evidence surface you are trusting. Raw probe/RPC evidence beats doctor summaries or convenience fields.
Phase 1 can produce observations and compliance notes. By itself it should not produce a high security severity.
Phase 2: Provoke (behavior, still mostly unauth)
Treat the Phase 1 auth signal as provisional until behavior confirms it.
For a full-auth candidate:
run DCR shape probes if DCR is supported
spot-check representative unauth tools list or tools call behavior when feasible
check malformed, expired, or obviously wrong-audience token handling without overstating what a rejection proves
For a public-or-mixed candidate:
run unauth tools list
classify exposed tools as read-only, write, or side-effect
call representative public tools unauth
check whether gated tools fail with a clean auth challenge instead of silent empty data or partial data
Anonymous tiers, rate limits, or degraded public access are posture notes, not a separate posture class.
Reclassify to one of no-auth, full-auth, mixed-auth, or unknown once Phase 2 behavior is clear. If Phase 2 contradicts Phase 1, update the posture and rerun the relevant checks instead of forcing the old classification.
Input-validation hits from Phase 2 cap at medium security severity until Phase 3 proves attacker benefit.
Design or posture findings can be real security findings in Phase 2, but do not auto-promote them. Document the unsafe behavior, abuse path, and any owner-intent uncertainty before calling them medium or high.
Phase 3: Exploit or confirm attacker benefit
Use oauth login and the same browser session when the proof depends on consent or cookies.
Use Phase 3 to turn a plausible concern into a real end-to-end security finding:
DCR plus authorization flow proof
redirect URI exact-match bypass proof
foreign-token acceptance or token passthrough proof
code, token, or cross-tenant data capture
Consent skip is one route to high, not the only route. Any demonstrated chain that shows concrete attacker gain can justify high.
Phase 4: Inventory blast radius
After auth succeeds, decode JWT claims, inspect Mcp-Session-Id with raw logs, and enumerate tools, resources, prompts, scopes, and tenant context.
Phase 4 is mainly blast-radius calibration. Treat it as context unless you also prove abuse.
Security severity calibration
high: demonstrated attacker benefit or conforming-client breakage with direct evidence
medium: credible security issue with a concrete attack scenario, but end-to-end proof is still partial
low: hardening gap or limited-impact security concern
pending: plausible security concern with a specific missing proof step that could materially raise or lower severity
info: true observation with no credible attacker benefit yet
Use pending instead of manufacturing a medium or high security severity from a checklist hit.
Command choice
server probe: HTTP transport reachability, initialize behavior, and OAuth discovery hints.
server doctor: combined triage artifact for probe plus connected behavior. Good for breadth, not always sufficient to prove wire-level behavior by itself.
oauth metadata, oauth proxy, oauth debug-proxy: exact endpoint and metadata inspection when conformance output looks surprising.
oauth login: obtain reusable credentials and verify the authenticated MCP path. Use --credentials-out <path> to save tokens to disk (mode 0600) so later connected commands can use --credentials-file <path> without manual token extraction; check references/cli-surface-notes.md for commands that require a non-expired access token. Use this when the goal is to inspect a server that requires OAuth, then follow it with connected commands rather than stopping at the login result.
oauth conformance, oauth conformance-suite: flow-level auth checks. Treat these as targeted probes, not a complete security review. Use --credentials-out <path> when a passing flow should hand credentials to later connected commands; use --credentials-file <path> after that instead of extracting tokens from JSON output. Raw JSON output redacts OAuth secrets by default. When --conformance-checks is enabled, the command can directly probe DCR non-loopback http:// redirects, invalid client rejection, authorization-endpoint redirect mismatch handling, invalid bearer-token rejection at the MCP server, and token-endpoint redirect mismatch handling.
xaa run: headless Cross-App Access (ID-JAG) flow against an authorization server and MCP server — mint, redeem via JWT bearer grant, and authenticated MCP initialize. Use when the task involves enterprise-managed authorization or ID-JAG trust debugging. Requires --issuer-base-url to point at an origin publishing the CLI's local signing key (typically mcpjam inspector start); read references/xaa-id-jag-interpretation.md before triaging its output. These are targeted checks for the current ID-JAG draft, not a conformance suite; the negative-test scorecard (tampered ID-JAGs) lives in the Inspector UI, not the CLI.
apps conformance: server-side MCP Apps checks for _meta.ui.resourceUri, ui:// resources, resources/read, HTML MIME and payload shape, and _meta.ui metadata. Use this for MCP Apps surface triage.
Output contract
General triage output
For non-security tasks, return:
Verdict: real issue, interop warning, implementation polish, or scanner/client artifact
Severity: high, medium, low, or info
Confidence: high, medium, or low
Why it matters: one short paragraph tied to interoperability, security, or user impact
Evidence: the exact CLI behavior that supports the claim
Missing evidence: what would need to be confirmed before raising severity or confidence
Security review output
For each claimed security-review finding, return:
Verdict: real issue, interop warning, implementation polish, or scanner/client artifact
Compliance severity: high, medium, low, or info
Security severity: high, medium, low, info, or pending
Confidence: high, medium, or low
Attack scenario or pending rationale: if Security severity is medium or high, open with 2-3 sentences answering who the attacker is, what they need, and what they gain; if it is pending, say exactly what proof is missing
Verified via: the phase plus exact command or result that supports the claim
Evidence: the exact CLI behavior that supports the claim
Missing evidence: what would need to be confirmed before raising severity or confidence
Hard rules
Never call toolsMetadata an MCP server field.
Never use removed app/widget commands for UI rendering. Use tools call --ui; use resources read --resource-uri ui://... for raw resource HTML.
Never manually orchestrate Inspector API calls when tools call --ui can drive the render.
Never skip tools list discovery when the user names a server but not a specific tool.
Never infer prompt support from an empty prompts list unless you have raw RPC evidence that prompts/list was actually sent and answered by the server.
Never stop at oauth_required when the user asked to inspect the authenticated server surface and the CLI can complete login. Authenticate and continue with post-login commands when feasible.
Never treat a passing apps conformance result as full SEP-1865 conformance. The current command is server-side only and does not prove host lifecycle, sandbox proxy, or postMessage bridge behavior.
Never treat missing optional metadata such as outputSchema, content annotations, scopes_supported, or scope hints as a hard failure without a MUST.
Separate OAuth RFC violations from MCP profile preferences.
Distinguish "the server correctly rejected a bad request" from "the overall design is secure."
Treat --debug-out artifacts as aggregated evidence envelopes, not pure wire captures.
Never flag missing scopes_supported or missing scope in WWW-Authenticate as a security issue. Both are optional.
Never claim a server is "secure" based solely on it rejecting one specific bad input. A single negative test does not prove broader security posture.
Never treat a passing oauth_invalid_token or redirect-mismatch probe as proof that the whole authorization design is secure. Those checks only prove the exact case that was sent.
Never let a checklist hit assign high security severity by itself.
JWT aud mismatch is not token passthrough proof unless you show the server accepts a token issued for a different audience or resource, or otherwise misbinds the token.
Supporting plain PKCE is usually hardening only. It cannot compound with attacker-owned-client DCR flows where the attacker chose the verifier.
Hostile values are not SSRF unless you show the server fetches them.
Reference map
references/cli-surface-notes.md
Use for command-specific caveats, artifact shapes, local enrichments, merged errors, and normalized empty arrays.
references/mcp-2025-11-25-interpretation.md
Use for capability, lifecycle, transport, authorization, tools, resources, and prompts interpretation against the latest MCP spec.
references/xaa-id-jag-interpretation.md
Use for xaa run output: the three-party trust model, issuer prerequisites, capability-evidence semantics, registration-warning taxonomy, SAML axes, and severity calibration for Cross-App Access findings.
server info, server capabilities, server validate, server ping, server export: connected behavior after initialization and auth.
tools list and tools call, resources list/read/templates, prompts list/get/list-multi: direct post-connect capability checks. With --ui, tools call renders the completed tool result in Inspector and reports inspectorRender as UI command/render evidence.
Prefer --quiet --format json. Add --rpc when available if you need request and response evidence rather than a summary. Add --debug-out when you need a failure-safe artifact, not as a replacement for raw evidence.
Use --reporter junit-xml or --reporter json-summary for CI report artifacts on conformance and diff commands. server validate does not accept --reporter; use --debug-out for validation artifacts. Do not use --format junit-xml; --format is only for raw json or human output.
For JSON-valued options, prefer @path or - stdin over shell-escaped inline JSON when payloads are generated or contain quotes. For example: mcpjam tools call --url <target> --tool-name <name> --tool-args @params.json --quiet --format json.
redirect_uri
Public unauthenticated access is not itself a finding. Check whether behavior matches advertised posture and whether exposed surfaces are safe by design.
Anonymous trial or rate-limited access is a posture note, not a separate severity finding.
When compounding findings, explain the compound attack path. Do not just list unrelated findings and call the combination worse.
Never triage an xaa run failure against the target server when verify_issuer_publication failed or the error is a bare connection failure with an empty steps array. Those are local issuer-setup problems: --issuer-base-url must serve the CLI's local signing key.
Never treat not_advertised capability evidence in xaa run output as a failure when redemption succeeded, and never treat advertisement as proof redemption would succeed. Advertisement is evidence; the token-endpoint response is the verdict. unknown (metadata key absent) is weaker evidence than not_advertised (key present without the value) — do not conflate them.
Never treat idJag.verified: true as proof the authorization server validated the assertion. It is the CLI verifying its own mint against its own issuer.
Never claim ID-JAG conformance or a secure XAA posture from one completed xaa run. It proves one happy path for one registration strategy.
Never describe --assertion-format saml as producing a SAML ID-JAG. It changes the identity-assertion leg and the sub_id claim; the ID-JAG is always a JWT. ID-JAG is an active IETF Internet-Draft — anchor MUST/SHOULD claims to the draft revision, not to an RFC.
Never report [REDACTED] values in xaa run output as missing data, and never ask for un-redacted output. Redaction is by design and survives server-reflected secrets.
