implementing-conduit-security-for-ot-remote-access

Implements secure conduit architecture for OT remote access under the IEC 62443 zones-and-conduits model, deploying jump servers, MFA gateways, session recording, and approval-based workflows for vendor and engineer access to ICS. Use when replacing direct VPN access into OT networks, securing third-party vendor access to SCADA equipment, or remediating audit findings on uncontrolled OT remote access.

الانتقال إلى التثبيت

المستودع: mukul975/Anthropic-Cybersecurity-Skills
آخر نشاط في المصدر: ٢ أغسطس ٢٠٢٦ في ١٦:٣٢
لغة SKILL.md المكتشفة: الإنجليزية
النجوم: ٢٧٬٧٣٢
التفرعات: ٣٬٣٦٦

خيارات التثبيت

يُحدَّد Prompt الذي يراجع المصدر أولًا بشكل افتراضي. يمكنك التبديل إلى أمر مباشر أو تنزيل نسخة محلية.

التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.

يتجاوز الأمر المباشر Prompt المخصّص للمراجعة. افحص المصدر قبل تشغيله.

npx skills add https://github.com/mukul975/Anthropic-Cybersecurity-Skills --skill implementing-conduit-security-for-ot-remote-access

يبقى الأمر في سطر واحد. مرّر أفقيًا لمراجعته كاملًا قبل النسخ.

تفضّل نسخة محلية؟ نزّل الملفات المتاحة حاليًا لدى SkillsMP.

مراجعة ملفات المصدر

اقرأ SKILL.md وأي ملفات مرافقة يعرضها SkillsMP قبل أن تقرر التثبيت.

مستكشف الملفات

4 ملفات

SKILL.md

تعليمات المصدر · معاينة للقراءة فقط

العودة إلى البحث العودة إلى التثبيت

abusing-dpapi-for-credential-access

Extract and decrypt Windows DPAPI-protected secrets (Credential Manager, browser logins/cookies, Wi-Fi credentials, KeePass keys) online or offline using SharpDPAPI, SharpChrome, Mimikatz, or Impacket's dpapi.py, including domain-wide decryption via the DPAPI backup key. Use during authorized red-team credential-access engagements after gaining a foothold or when triaging DPAPI blobs pulled from a host.

2026-08-02

abusing-shadow-credentials-for-privesc

Take over Active Directory accounts by writing attacker-controlled public keys to msDS-KeyCredentialLink (Shadow Credentials) with pyWhisker, Whisker, or Certipy, then authenticate via PKINIT to recover the target's NT hash without a password reset. Use when BloodHound shows GenericWrite/GenericAll/AddKeyCredentialLink over a target, as a stealthier alternative to ForceChangePassword, during authorized red-team engagements.

2026-08-02

acquiring-disk-image-with-dd-and-dcfldd

Create forensically sound bit-for-bit disk images with dd or dcfldd on a Linux forensic workstation, preserving evidence integrity through hash verification (MD5/SHA) during acquisition. Use when imaging a suspect drive, USB device, or memory card for investigation, preserving volatile disk evidence during incident response, or producing a verified copy for legal or law-enforcement proceedings before any destructive analysis.

2026-08-02

عرض الكل من هذا المستودع

Implementing Conduit Security for OT Remote Access

When to Use

When replacing direct VPN connections from IT or vendors into OT control networks

When implementing IEC 62443-compliant conduit architecture for remote access paths

When deploying secure remote access for third-party vendor maintenance of ICS equipment

When building approval-based access workflows for privileged OT system access

When remediating audit findings about uncontrolled remote access to SCADA systems

Do not use for designing the overall Purdue Model segmentation (see implementing-purdue-model-network-segmentation), for deploying IT-only remote access solutions, or for configuring local console access to PLCs.

Prerequisites

IT/OT DMZ (Level 3.5) deployed with dual-firewall architecture

Jump server or privileged access management (PAM) platform (CyberArk, BeyondTrust)

Multi-factor authentication (MFA) infrastructure for OT remote access users

Session recording capability for compliance and forensic purposes

Approval workflow system (ServiceNow, ticketing) for access requests

Workflow

Step 1: Design Conduit Architecture for Remote Access

# IEC 62443 Conduit Security Architecture for OT Remote Access # All remote access terminates in DMZ - never passes through to OT directly conduit_architecture: remote_access_conduit: conduit_id: "RA-001" source_zone: "Enterprise IT (Level 4)" destination_zone: "OT DMZ (Level 3.5)" security_level_target: "SL3" components: external_gateway: type: "VPN Concentrator" location: "Enterprise DMZ" ip: "10.200.1.10" protocols: ["IPsec", "SSL-VPN"] authentication:

Implementing Conduit Security for OT Remote Access

When to Use

When replacing direct VPN connections from IT or vendors into OT control networks

When implementing IEC 62443-compliant conduit architecture for remote access paths

When deploying secure remote access for third-party vendor maintenance of ICS equipment

When building approval-based access workflows for privileged OT system access

When remediating audit findings about uncontrolled remote access to SCADA systems

Prerequisites

IT/OT DMZ (Level 3.5) deployed with dual-firewall architecture

Jump server or privileged access management (PAM) platform (CyberArk, BeyondTrust)

Multi-factor authentication (MFA) infrastructure for OT remote access users

Session recording capability for compliance and forensic purposes

Approval workflow system (ServiceNow, ticketing) for access requests

Workflow

Step 1: Design Conduit Architecture for Remote Access

#!/usr/bin/env python3 """OT Remote Access Conduit Manager. Manages approval-based remote access to OT systems through secure conduit architecture with session recording, MFA enforcement, and time-limited access windows. """ import json import sys from datetime import datetime, timedelta from typing import Dict, List, Optional from enum import Enum class AccessRequestStatus(Enum): PENDING = "pending" APPROVED = "approved" REJECTED = "rejected" ACTIVE = "active" EXPIRED = "expired" REVOKED = "revoked" class RemoteAccessRequest: """Represents an OT remote access request.""" def __init__(self, requestor: str, requestor_type: str, purpose: str, target_systems: List[str], duration_hours: int, requested_start: str): self.id = f"OT-RA-{datetime.now().strftime('%Y%m%d-%H%M%S')}" self.requestor = requestor self.requestor_type = requestor_type # "internal_engineer" or "vendor" self.purpose = purpose self.target_systems = target_systems self.duration_hours = duration_hours self.requested_start = requested_start self.status = AccessRequestStatus.PENDING self.created = datetime.now().isoformat() self.approved_by = None self.session_id = None self.audit_trail = [] def approve(self, approver: str, conditions: str = ""): """Approve the access request.""" self.status = AccessRequestStatus.APPROVED self.approved_by = approver self.audit_trail.append({ "timestamp": datetime.now().isoformat(), "action": "APPROVED", "actor": approver, "conditions": conditions, }) def reject(self, rejector: str, reason: str): """Reject the access request.""" self.status = AccessRequestStatus.REJECTED self.audit_trail.append({ "timestamp": datetime.now().isoformat(), "action": "REJECTED", "actor": rejector, "reason": reason, }) class OTConduitManager: """Manages OT remote access conduit security.""" def __init__(self): self.access_requests: Dict[str, RemoteAccessRequest] = {} self.active_sessions: Dict[str, dict] = {} self.policy = self._load_policy() def _load_policy(self) -> dict: """Load remote access policy.""" return { "max_session_hours": 4, "idle_timeout_minutes": 15, "mfa_required": True, "session_recording": True, "clipboard_transfer": False, "file_transfer": "scan_required", "advance_notice_hours": 24, "vendor_escort_required": True, "prohibited_targets": ["SIS-*", "SAFETY-*"], "allowed_protocols": ["RDP", "SSH", "VNC"], "blocked_protocols": ["Telnet", "FTP", "SMB"], } def submit_request(self, request: RemoteAccessRequest) -> str: """Submit a new remote access request.""" # Validate against policy violations = [] if request.duration_hours > self.policy["max_session_hours"]: violations.append( f"Duration {request.duration_hours}h exceeds maximum {self.policy['max_session_hours']}h" ) for target in request.target_systems: for prohibited in self.policy["prohibited_targets"]: pattern = prohibited.replace("*", "") if target.startswith(pattern): violations.append(f"Target {target} is in prohibited list (safety systems)") if violations: print(f"[!] Policy violations found:") for v in violations: print(f" - {v}") return "" self.access_requests[request.id] = request print(f"[+] Access request {request.id} submitted for approval") return request.id def list_pending_requests(self): """List all pending access requests for approval.""" pending = [r for r in self.access_requests.values() if r.status == AccessRequestStatus.PENDING] print(f"\n{'='*65}") print("PENDING OT REMOTE ACCESS REQUESTS") print(f"{'='*65}") if not pending: print(" No pending requests") return for req in pending: print(f"\n Request: {req.id}") print(f" Requestor: {req.requestor} ({req.requestor_type})") print(f" Purpose: {req.purpose}") print(f" Targets: {', '.join(req.target_systems)}") print(f" Duration: {req.duration_hours} hours") print(f" Start: {req.requested_start}") print(f" Submitted: {req.created}") def generate_audit_report(self): """Generate audit report of all remote access activity.""" print(f"\n{'='*65}") print("OT REMOTE ACCESS AUDIT REPORT") print(f"{'='*65}") print(f"Report Date: {datetime.now().isoformat()}") print(f"Total Requests: {len(self.access_requests)}") status_counts = {} for req in self.access_requests.values(): status = req.status.value status_counts[status] = status_counts.get(status, 0) + 1 print(f"\nRequest Status:") for status, count in status_counts.items(): print(f" {status}: {count}") print(f"\nDetailed Audit Trail:") for req in self.access_requests.values(): print(f"\n {req.id} - {req.requestor} ({req.requestor_type})") print(f" Status: {req.status.value}") print(f" Targets: {', '.join(req.target_systems)}") for entry in req.audit_trail: print(f" [{entry['timestamp']}] {entry['action']} by {entry['actor']}") if __name__ == "__main__": manager = OTConduitManager() # Vendor access request vendor_req = RemoteAccessRequest( requestor="John Smith - Siemens Field Service", requestor_type="vendor", purpose="Annual PLC firmware update for S7-1500 controllers", target_systems=["PLC-REACTOR-01", "PLC-REACTOR-02"], duration_hours=3, requested_start="2025-03-15T08:00:00", ) req_id = manager.submit_request(vendor_req) if req_id: manager.list_pending_requests() # Simulate approval manager.access_requests[req_id].approve( approver="Plant Manager - Jane Doe", conditions="OT engineer must shadow the vendor session", ) manager.generate_audit_report()

name	implementing-conduit-security-for-ot-remote-access
description	Implements secure conduit architecture for OT remote access under the IEC 62443 zones-and-conduits model, deploying jump servers, MFA gateways, session recording, and approval-based workflows for vendor and engineer access to ICS. Use when replacing direct VPN access into OT networks, securing third-party vendor access to SCADA equipment, or remediating audit findings on uncontrolled OT remote access.
domain	cybersecurity
subdomain	ot-ics-security
tags	["ot-security","ics","remote-access","iec62443","jump-server","zero-trust","conduit","mfa"]
version	1.0
author	mahipal
license	Apache-2.0
nist_csf	["PR.IR-01","DE.CM-01","ID.AM-05","GV.OC-02"]
mitre_attack	["T1078","T1190","T1059","T0816","T0836"]

name	implementing-conduit-security-for-ot-remote-access
description	Implements secure conduit architecture for OT remote access under the IEC 62443 zones-and-conduits model, deploying jump servers, MFA gateways, session recording, and approval-based workflows for vendor and engineer access to ICS. Use when replacing direct VPN access into OT networks, securing third-party vendor access to SCADA equipment, or remediating audit findings on uncontrolled OT remote access.
domain	cybersecurity
subdomain	ot-ics-security
tags	["ot-security","ics","remote-access","iec62443","jump-server","zero-trust","conduit","mfa"]
version	1.0
author	mahipal
license	Apache-2.0
nist_csf	["PR.IR-01","DE.CM-01","ID.AM-05","GV.OC-02"]
mitre_attack	["T1078","T1190","T1059","T0816","T0836"]

Term	Definition
Conduit	IEC 62443 controlled communication path between security zones with defined security policies
Jump Server	Hardened intermediary server in the DMZ through which all remote OT access must transit
Session Recording	Capture of all screen activity, keystrokes, and commands during a remote access session for audit
Approval-Based Access	Workflow requiring plant operations manager authorization before remote access credentials are activated
Vendor Escort	Practice of having an internal OT engineer monitor vendor remote sessions in real time
Break-Glass Access	Emergency access procedure bypassing normal approval workflow for critical situations

implementing-conduit-security-for-ot-remote-access

خيارات التثبيت

مراجعة ملفات المصدر