tailscale-up

name

tailscale-up

description

Tailscale runtime wiring for target:local hosts. Sets `--operator=$account` + `--hostname=$(hostname -s)` so user-systemd ExecStartPost can run `tailscale serve` without sudo, and the tailnet device name stays in sync with the system hostname. Depends on /charly-infrastructure:tailscale (which installs the daemon). Self-gates on `systemctl is-active tailscaled` so it's a no-op in image-build / pre-auth contexts. Use when adding deploy-runtime tailscale wiring to a target:local host (canonical consumer: local.charly-cachyos) — distinct from the tailscale candy which only installs + enables the daemon.

tailscale-up — runtime wiring for target:local hosts

Why this candy exists separately from tailscale

The tailscale candy installs the daemon and enables the systemd unit. That's a build-time concern shared by bootc images, VMs, and any other box that wants its own tailnet identity at boot.

The --operator and --hostname settings, however, are runtime state that:

• Cannot be applied at image build time (the daemon isn't running, so tailscale set has no socket to talk to).
• Are meaningless on bootc images that have no human "deploy user" matching uid 1000.
• Need re-application across hostname changes (hostnamectl set-hostname new-name doesn't propagate to the tailnet device name automatically).

Mixing those concerns into the shared tailscale candy would either break bootc consumers (with build-time errors from missing daemon socket) or require a target-aware conditional inside the shared candy — exactly the kind of <name>-host polymorphism that CLAUDE.md's "Init-system polymorphism" rule forbids.

tailscale-up is the runtime-config sibling: it depends on tailscale, self-gates on systemctl is-active tailscaled, and only fires when the daemon is actually up. Bootc consumers don't include it.

Candy Properties

Property	Value
Dependencies	tailscale
Packages	none (config-only layer)
Service	none (sets state on existing tailscaled.service)
Install files	task: (one cmd task)

Task body

The candy's single cmd task:

1. Starts tailscaled.service via systemctl start ... || true. The /charly-infrastructure:tailscale candy is systemctl enable-only (no --now) because the same task body runs at image-build time where systemd isn't PID 1 and --now would fail; starting the service is therefore a deploy-runtime concern that belongs in this candy. Idempotent — no-op when already running, suppressed when no live systemd is available.
2. Self-gates on systemctl is-active --quiet tailscaled || exit 0 so the rest of the body is a no-op in any context where the daemon isn't running (image build, masked unit, etc.).
3. Resolves the human deploy user via getent passwd 1000 | cut -d: -f1. This matches the wheel-nopasswd candy and the renderBuilderScript helper in charly/deploy_host_helpers.go — uid 1000 is the canonical "first human user" in this repo across CachyOS, Arch, Fedora, Debian, and Ubuntu base images. SUDO_USER is intentionally NOT used: runSudoShell calls sudo -n bash -s without -E, so the default env_reset strips SUDO_USER on strict sudoers configurations.
4. Calls tailscale set --operator="$account" (suppressed via || true so a logged-out daemon doesn't fail the deploy).
5. Reads /etc/hostname directly (NOT hostname -s — the hostname binary lives in Arch's inetutils package, which is NOT in the minimal cloud-image base used by the check-arch-vm R10 bed; reading the file is binary-dependency-free and works on every distro). Calls tailscale set --hostname=<short-form> (also suppressed) to keep the tailnet device name in sync with the system hostname; the short form is the value before the first dot, matching hostname -s semantics.

Check probes

Both deploy-scope probes use a three-state pattern:

• (a) Daemon down → pass-skip (image-build context, fresh test bed pre-deploy).
• (b) Daemon up + tailscale logged out → pass-skip (test bed post-deploy, no tailscale up performed).
• (c) Daemon up + tailscale logged in → assert.

The "logged in" detection uses tailscale status --peers=false | head -1 | grep -q "Logged out" — false means logged-in.

tailscale-up-operator-readable: when logged in, asserts that tailscale debug prefs succeeds AND emits a non-empty "OperatorUser": line. Calling debug prefs without sudo is itself the proof that --operator took effect (operator-or-root is the authorization policy).

tailscale-up-hostname-tracks-system: when logged in, asserts that the prefs Hostname field equals hostname -s.

Used in

• local.charly-cachyos — primary consumer, applies it on every fresh CachyOS dev workstation.
• Any future target: local template that needs tailnet operator permission.

NOT used in:

• Any target: pod deployment — pod tunnels go through the tunnel: tailscale mechanism in charly.yml (handled by the host's tailscale, not in-pod). See /charly-core:deploy "Tailscale Serve".
• Bootc images — they need fresh-boot semantics that don't match the deploy-runtime contract here. Use /charly-infrastructure:tailscale alone.

Renaming an already-registered device — and why the candy doesn't auto-fix

tailscale set --hostname=<X> updates local prefs and is what the candy task does on every deploy. For a fresh node that has not yet run tailscale up, the prefs Hostname is what gets registered with the control plane on first auth — so the tailnet device name matches /etc/hostname automatically.

For a node that was already authed before this candy landed, the device name on the tailnet is the value registered at original tailscale up time and DOES NOT auto-rename when prefs.Hostname changes. This is intentional Tailscale design — names are sticky in the control plane to keep ACL rules, DNS caches, and audit trails stable across reconfigurations. The local prefs are updated correctly (visible via tailscale debug prefs | grep Hostname), but tailscale status keeps showing the old name.

The candy surfaces this divergence as a hard-fail check probe (tailscale-up-device-name-matches-hostname). On every charly check live <deploy> against a logged-in tailnet member, the probe compares the short form of tailscale status --self --json | .DNSName against /etc/hostname (cut to short form). If they differ, the probe fails with stderr text identifying the registered device, the system hostname, and both remediation paths. The probe self-gates on daemon state (skips on a logged-out daemon) so test beds aren't affected.

Two remediation paths (operator action required)

1. Admin-console rename at https://login.tailscale.com/admin/machines — pick the device, click the kebab menu, "Edit machine name". Safe, no service interruption, no re-auth, preserves exit-node config and all other prefs. Recommended for any node with non-default flags.

2. sudo tailscale up --reset --hostname=$(cat /etc/hostname | cut -d. -f1) — re-registers the device with the prefs Hostname. WARNING: --reset clears every non-default flag (exit-node config, advertised routes, accept-routes, accept-DNS-override, advertise-tags, etc.). Only use this on a node where every flag is at its Tailscale default.

Why the candy doesn't auto-rename

The candy does not reach for tailscale up --reset automatically because:

• It wipes operator-set prefs that the candy can't enumerate or preserve (exit-node config, advertised routes, accept-routes are typical examples).
• It triggers a brief disconnect + re-auth attempt, which can fail on ephemeral auth keys or expire-on-rotate setups.
• It violates CLAUDE.md's "no ad-hoc workarounds" rule: a --reset to fix a name divergence is a sledgehammer for a problem better solved by an admin-console click or a deliberate operator-driven up.

A proper auto-rename would require the Tailscale REST API (PATCH https://api.tailscale.com/api/v2/device/{id}/name) plus an operator-managed PAT or OAuth secret — significant credential- management scope. If a future need arises for fully-automated rename (fleet provisioning, CI runners), that's the right path; today's manual remediation covers the actual single-host case.

Bring-up flow for a fresh CachyOS host

# 1. Apply the charly-cachyos template — installs everything, including
#    tailscale (daemon enabled) + tailscale-up (operator/hostname
#    setters armed for next-time-up state changes).
charly bundle add charly-cachyos

# 2. Authenticate the daemon via the user's tailnet (browser SSO):
sudo tailscale up

# 3. Verify operator + hostname are wired correctly:
tailscale debug prefs | grep -E '"OperatorUser"|"Hostname"'
tailscale status | head -2

# 4. Optional re-apply (idempotent) to confirm the runtime task takes
#    effect now that the daemon is logged in:
charly bundle add charly-cachyos

Subsequent charly bundle add charly-cachyos invocations re-run the runtime task and re-confirm the operator + hostname state. Hostname changes (sudo hostnamectl set-hostname new-name) propagate to the tailnet on the next deploy.

MagicDNS

MagicDNS is a tailnet-account-level toggle, not a per-node setting. Enable it once at https://login.tailscale.com/admin/dns ; every node logging in to the tailnet automatically gets 100.100.100.100 as a DNS server (visible via resolvectl status | grep '100.100.100.100') and the *.ts.net magic search domain.

tailscale-up does not touch DNS state — tailscale up (run manually post-deploy) handles the per-node resolver wiring automatically on systemd-resolved hosts (which CachyOS uses).

tailscale serve for pod deploys — direct, no restart

The --operator permission this candy wires is what makes the direct, host-level tailscale serve workflow work without sudo. For each pod that publishes a host port (e.g. immich-ml on 2283, ollama on 11434), one shell command on the host adds it to the tailnet:

tailscale serve --bg --https=2283 http://127.0.0.1:2283
tailscale serve --bg --https=11434 http://127.0.0.1:11434
# ... one line per pod port

Each invocation writes to tailscaled.state (the daemon's local BoltDB) and starts a listener on the tailscale interface that forwards to the pre-existing host-loopback socket. Nothing about the pod changes — no quadlet regen, no restart, no daemon-reload, no port re-publish. The pod's published port on 127.0.0.1 was always already there; tailscale serve simply adds a new path INTO it from the tailnet.

To list current serves and their backends:

tailscale serve status

To remove a serve:

tailscale serve --https=2283 off

The serve config is persisted in the daemon's state and survives restarts, so a one-time setup is durable. Re-running with the same args is idempotent (replaces the existing entry verbatim).

Compared to the per-pod tunnel: tailscale charly.yml mechanism

/charly-core:deploy documents a tunnel: tailscale field that emits ExecStartPost=tailscale serve ... into the pod's quadlet. That also works and is the right answer when (a) you want the serve config tied to the pod's lifecycle (added on charly config, removed on charly remove), or (b) you're willing to regenerate the quadlet and restart the pod. For the more common "I have running pods, I want them on the tailnet right now" case, the direct tailscale serve workflow above is faster, restartless, and doesn't touch any source-tree state.

See /charly-core:deploy "Tailscale Serve" for the per-pod tunnel matrix and /charly-automation:sidecar for the tailscale-sidecar pattern (an alternative when a pod needs its own tailnet identity, not just host-level serve).

Related Skills

• /charly-infrastructure:tailscale — the install-side companion (daemon install + systemctl enable). tailscale-up require: it.
• /charly-core:deploy — charly.yml tunnel: tailscale mechanism that consumes the --operator permission.
• /charly-local:local-deploy — the target: local execution model this candy is designed for.
• /charly-local:local-spec — local.yml template authoring; the canonical consumer is local.charly-cachyos.
• the wheel-nopasswd candy — provides the passwordless sudo used by the check probe's tailscale debug prefs chain.
• /charly-image:layer — candy authoring reference.
• /charly-check:check — declarative testing reference (three-state pattern used here).

When to Use This Skill

Use when the user asks about:

• Why tailscale serve fails with "permission denied" on a fresh charly-cachyos host.
• How to keep the tailnet device name in sync with hostname -s.
• The split between the build-time tailscale install and the deploy-time tailscale wiring.
• Writing a new candy that adds runtime configuration on top of an install-side candy (this is the canonical worked example).