القائمة
Verify GPIO pin assignments match between firmware (board_config.h) and schematic (config.py)
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Full PCB verification loop using local kicad-cli (DRC + 3D render + gerbers)
Create a new Claude Code skill for this project. Use when you need to add a new skill, improve an existing skill, or convert a workflow into a reusable skill.
Verifies that every PCB pad-to-net assignment matches the manufacturer datasheet pin specifications. Use when changing board.py/routing.py/footprints.py, after GPIO remapping, before releases, or when adding new components. Automated guard against wiring errors like unconnected VBUS, wrong pin assignments, or missing GND connections.
Design intent adversary — cross-checks GPIO, nets, power chains, signal paths across firmware/schematic/PCB/datasheet sources to find lost connections and inconsistencies
Analyze a DFM report and fix all issues in the PCB generation scripts
Run DFM guard tests and add new regression tests after fixing PCB issues
| name | firmware-sync |
| model | claude-opus-4-7 |
| description | Verify GPIO pin assignments match between firmware (board_config.h) and schematic (config.py) |
| disable-model-invocation | true |
| allowed-tools | Bash, Read, Grep, Glob, Edit |
Cross-reference GPIO pin assignments between the firmware source of truth and the schematic generator.
cd /Users/pierrejonnycau/Documents/WORKS/esp32-emu-turbo
Read scripts/generate_schematics/config.py — this is the master GPIO mapping:
Read software/main/board_config.h — the firmware's GPIO definitions.
For each signal, verify:
Print a comparison table:
Signal | Schematic GPIO | Firmware GPIO | Status
-------------|---------------|---------------|-------
LCD_D0 | 4 | 4 | OK
LCD_D1 | 5 | 5 | OK
...
BTN_START | 18 | 19 | MISMATCH!
If mismatches found:
board_config.h to match config.pyscripts/generate_schematics/config.py — Master GPIO mapping (source of truth)software/main/board_config.h — Firmware GPIO definitionswebsite/docs/snes-hardware.md — Documentation (should also match)