lint-guard

name	lint-guard
description	Set up strict complexity linting for any project. Detects languages, recommends linters, configures strict rules, and installs a Stop hook to enforce them automatically. Use when prompted by the SessionStart detection message, or manually to configure/reconfigure linting.
user-invocable	true
tools	Read, Edit, Write, Bash, Glob, AskUserQuestion

Lint Guard

Set up and enforce strict linter complexity rules for the current project. Language-agnostic — supports 17 languages.

Overview

This skill:

1. Detects which languages are used in the project
2. Checks which linters are already configured
3. Recommends the best linter + strict complexity rules for each language
4. Installs linters and writes configs on user approval
5. Generates .claude/linters.json
6. Installs a Stop hook that runs linters on every code change

When Invoked During Coding (Not Setup)

If .claude/linters.json already exists and the user invokes this skill, switch to lint-check mode:

1. Read .claude/linters.json
2. Get changed files via git diff --name-only
3. Run each linter's command on matching changed files
4. For violations with safe_autofix: true in the config, run the autofix_command
5. For complexity violations (not auto-fixable), report them and suggest refactoring
6. Do NOT auto-fix complexity violations — report only

Setup Flow

Step 1: Detect Languages

Check the project for these marker files to detect languages:

Language	Marker Files
TypeScript/JavaScript	package.json, tsconfig.json
Python	pyproject.toml, setup.py, requirements.txt
Rust	Cargo.toml
Go	go.mod
C/C++	CMakeLists.txt, Makefile, *.c, *.cpp, *.h
Java	pom.xml, build.gradle, build.gradle.kts
C#	*.csproj, *.sln
Ruby	Gemfile
PHP	composer.json
Kotlin	detekt.yml, *.kt in src/
Swift	Package.swift, *.swift
Scala	build.sbt
Haskell	*.cabal, stack.yaml
OCaml	dune-project
Lean	lakefile.lean, lean-toolchain
Lua	*.lua
Unison	*.u

If the SessionStart hook already provided detection results in the conversation, use those instead of re-detecting.

Step 2: Check Existing Linter Configs

For each detected language, check if a linter config already exists:

Language	Linter Config Files
TypeScript/JavaScript	.eslintrc*, eslint.config.*
Python	ruff.toml, pyproject.toml [tool.ruff], .flake8
Rust	clippy.toml, .clippy.toml
Go	.golangci.yml, .golangci.yaml
C/C++	.clang-tidy
Java	pmd.xml, checkstyle.xml
C#	.editorconfig
Ruby	.rubocop.yml
PHP	phpcs.xml, phpstan.neon
Kotlin	detekt.yml, detekt-config.yml
Swift	.swiftlint.yml
Scala	.scalafix.conf
Haskell	.hlint.yaml
OCaml	.ocamlformat

Step 3: Present Recommendations

Present the findings to the user in a clear summary:

For each language with an existing linter:

"[Language]: Found [linter]. Checking for strict complexity rules..." Then inspect the config and list which strict rules are missing.

For each language without a linter:

"[Language]: No linter configured. Recommended: [linter]." Show the install command and what strict rules would be enabled.

For unsupported languages (Lean, Unison):

"[Language]: No complexity linter available. Skipping."

For formatting-only languages (OCaml, Lua):

"[Language]: Only formatting tools available ([tool]). Limited complexity enforcement."

Then ask: "Want me to install and configure these linters with strict complexity rules? (y/n)"

If the user declines:

mkdir -p .claude
touch .claude/.no-lint-setup

Report: "Lint Guard setup skipped. The .claude/.no-lint-setup marker will prevent future prompts. Delete it to re-enable."

Stop here — do not proceed to Step 4.

Scope gate (before Step 4): List the languages detected in Step 1 literally in your response. Install and configure ONLY for those languages. Do NOT pre-emptively configure languages absent from the project, even if this SKILL.md documents them.

Step 4: Install and Configure Linters

For each language the user approved, install the linter and write strict configs.

Use the reference table below for exact install commands, config content, and strict rules.

TypeScript/JavaScript — ESLint + SonarJS + Unicorn + Perfectionist

Install:

npm install -D eslint eslint-plugin-sonarjs eslint-plugin-unicorn eslint-plugin-perfectionist @eslint/js

Strict rules (add to existing ESLint config or create eslint.config.mjs):

// Strict complexity rules — added by lint-guard
{
  rules: {
    'complexity': ['error', { max: 10 }],
    'max-depth': ['error', { max: 3 }],
    'max-lines-per-function': ['error', { max: 60, skipBlankLines: true, skipComments: true }],
    'max-params': ['error', { max: 4 }],
    'max-statements': ['error', { max: 15 }],
    'max-nested-callbacks': ['error', { max: 3 }],
    'sonarjs/cognitive-complexity': ['error', 10],
  }
}

linters.json entry:

{
  "name": "eslint",
  "language": "typescript/javascript",
  "command": "npx eslint --max-warnings 0",
  "autofix_command": "npx eslint --fix",
  "safe_autofix": true,
  "glob": "*.{js,ts,jsx,tsx,mjs,cjs}",
  "strict_rules_applied": true
}

Python — ruff

Install:

pip install ruff

Or if using brew: brew install ruff

Strict rules (add to ruff.toml or pyproject.toml [tool.ruff]):

[lint]
select = [
  "E",     # pycodestyle errors
  "W",     # pycodestyle warnings
  "F",     # pyflakes
  "C901",  # McCabe complexity
  "PLR",   # pylint refactor rules
]

[lint.mccabe]
max-complexity = 10

[lint.pylint]
max-args = 5
max-branches = 12
max-returns = 6
max-statements = 50

linters.json entry:

{
  "name": "ruff",
  "language": "python",
  "command": "ruff check",
  "autofix_command": "ruff check --fix",
  "safe_autofix": true,
  "glob": "*.py",
  "strict_rules_applied": true
}

Go — golangci-lint

Install:

brew install golangci-lint

Strict rules (create .golangci.yml):

linters:
  enable:
    - cyclop
    - funlen
    - gocognit
    - gocyclo
    - nestif

linters-settings:
  cyclop:
    max-complexity: 10
  funlen:
    lines: 60
    statements: 40
  gocognit:
    min-complexity: 10
  gocyclo:
    min-complexity: 10
  nestif:
    min-complexity: 4

linters.json entry:

{
  "name": "golangci-lint",
  "language": "go",
  "command": "golangci-lint run",
  "autofix_command": "golangci-lint run --fix",
  "safe_autofix": true,
  "glob": "*.go",
  "strict_rules_applied": true
}

Rust — clippy

Install: Included with rustup (no extra install needed).

Strict rules (create clippy.toml if it doesn't exist):

cognitive-complexity-threshold = 10
too-many-arguments-threshold = 5
too-many-lines-threshold = 60

Also add to the project's Cargo.toml or .cargo/config.toml:

[lints.clippy]
pedantic = { level = "warn", priority = -1 }
cognitive_complexity = "deny"
too_many_arguments = "warn"
too_many_lines = "warn"

linters.json entry:

{
  "name": "clippy",
  "language": "rust",
  "command": "cargo clippy -- -D warnings",
  "autofix_command": "cargo clippy --fix --allow-dirty",
  "safe_autofix": true,
  "glob": "*.rs",
  "strict_rules_applied": true
}

C/C++ — clang-tidy

Install:

brew install llvm

Strict rules (create .clang-tidy):

Checks: >
  -*,
  readability-function-cognitive-complexity,
  readability-function-size,
  readability-simplify-boolean-expr

CheckOptions:
  readability-function-cognitive-complexity.Threshold: 10
  readability-function-size.LineThreshold: 60
  readability-function-size.StatementThreshold: 40
  readability-function-size.ParameterThreshold: 5

linters.json entry:

{
  "name": "clang-tidy",
  "language": "c/c++",
  "command": "clang-tidy",
  "autofix_command": "clang-tidy --fix",
  "safe_autofix": false,
  "glob": "*.{c,cpp,cc,h,hpp}",
  "strict_rules_applied": true
}

Java — PMD

Install:

brew install pmd

Strict rules (create pmd-ruleset.xml):

<?xml version="1.0"?>
<ruleset name="Lint Guard Strict"
  xmlns="http://pmd.sourceforge.net/ruleset/2.0.0"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://pmd.sourceforge.net/ruleset/2.0.0 https://pmd.sourceforge.io/ruleset_2_0_0.xsd">

  <rule ref="category/java/design.xml/CyclomaticComplexity">
    <properties><property name="methodReportLevel" value="10"/></properties>
  </rule>
  <rule ref="category/java/design.xml/NPathComplexity">
    <properties><property name="reportLevel" value="200"/></properties>
  </rule>
  <rule ref="category/java/design.xml/ExcessiveMethodLength">
    <properties><property name="minimum" value="60"/></properties>
  </rule>
  <rule ref="category/java/design.xml/ExcessiveParameterList">
    <properties><property name="minimum" value="5"/></properties>
  </rule>
  <rule ref="category/java/design.xml/CognitiveComplexity">
    <properties><property name="reportLevel" value="10"/></properties>
  </rule>
</ruleset>

linters.json entry:

{
  "name": "pmd",
  "language": "java",
  "command": "pmd check -d src -R pmd-ruleset.xml -f text",
  "autofix_command": "",
  "safe_autofix": false,
  "glob": "*.java",
  "strict_rules_applied": true
}

C# — dotnet format + Roslyn analyzers

Install: Included with .NET SDK.

Strict rules (add to .editorconfig):

[*.cs]
# Complexity analyzers
dotnet_diagnostic.CA1502.severity = warning  # Avoid excessive complexity
dotnet_diagnostic.CA1505.severity = warning  # Avoid unmaintainable code
dotnet_diagnostic.CA1506.severity = warning  # Avoid excessive coupling

linters.json entry:

{
  "name": "dotnet-format",
  "language": "c#",
  "command": "dotnet format --verify-no-changes --diagnostics CA1502 CA1505 CA1506",
  "autofix_command": "dotnet format",
  "safe_autofix": true,
  "glob": "*.cs",
  "strict_rules_applied": true
}

Ruby — RuboCop

Install:

gem install rubocop

Strict rules (add to .rubocop.yml):

Metrics/CyclomaticComplexity:
  Enabled: true
  Max: 10

Metrics/PerceivedComplexity:
  Enabled: true
  Max: 10

Metrics/MethodLength:
  Enabled: true
  Max: 20

Metrics/AbcSize:
  Enabled: true
  Max: 30

Metrics/ParameterLists:
  Enabled: true
  Max: 4

Metrics/BlockNesting:
  Enabled: true
  Max: 3

linters.json entry:

{
  "name": "rubocop",
  "language": "ruby",
  "command": "rubocop --format simple",
  "autofix_command": "rubocop --autocorrect",
  "safe_autofix": true,
  "glob": "*.rb",
  "strict_rules_applied": true
}

PHP — PHP_CodeSniffer + PHPStan

Install:

composer require --dev squizlabs/php_codesniffer phpstan/phpstan

Strict rules (create phpcs.xml):

<?xml version="1.0"?>
<ruleset name="Lint Guard Strict">
  <rule ref="Generic.Metrics.CyclomaticComplexity">
    <properties><property name="complexity" value="10"/></properties>
  </rule>
  <rule ref="Generic.Metrics.NestingLevel">
    <properties><property name="nestingLevel" value="3"/></properties>
  </rule>
  <rule ref="Generic.Files.LineLength">
    <properties><property name="lineLimit" value="120"/></properties>
  </rule>
</ruleset>

linters.json entry:

{
  "name": "phpcs",
  "language": "php",
  "command": "vendor/bin/phpcs --standard=phpcs.xml",
  "autofix_command": "vendor/bin/phpcbf --standard=phpcs.xml",
  "safe_autofix": true,
  "glob": "*.php",
  "strict_rules_applied": true
}

Kotlin — detekt

Install:

brew install detekt

Strict rules (create detekt-config.yml):

complexity:
  CyclomaticComplexMethod:
    active: true
    threshold: 10
  LongMethod:
    active: true
    threshold: 60
  LongParameterList:
    active: true
    functionThreshold: 5
  NestedBlockDepth:
    active: true
    threshold: 3
  CognitiveComplexMethod:
    active: true
    threshold: 10

linters.json entry:

{
  "name": "detekt",
  "language": "kotlin",
  "command": "detekt --config detekt-config.yml --input src",
  "autofix_command": "",
  "safe_autofix": false,
  "glob": "*.kt",
  "strict_rules_applied": true
}

Swift — SwiftLint

Install:

brew install swiftlint

Strict rules (create .swiftlint.yml):

opt_in_rules:
  - cyclomatic_complexity
  - function_body_length
  - function_parameter_count
  - nesting

cyclomatic_complexity:
  warning: 10
  error: 15

function_body_length:
  warning: 60
  error: 100

function_parameter_count:
  warning: 4
  error: 6

nesting:
  type_level: 2
  function_level: 3

linters.json entry:

{
  "name": "swiftlint",
  "language": "swift",
  "command": "swiftlint lint --strict",
  "autofix_command": "swiftlint lint --fix",
  "safe_autofix": true,
  "glob": "*.swift",
  "strict_rules_applied": true
}

Scala — Scalafix

Install:

cs install scalafix

Strict rules (create .scalafix.conf):

rules = [
  RemoveUnused,
  DisableSyntax,
  LeakingImplicitClassVal,
  NoValInForComprehension
]

DisableSyntax.noVars = true
DisableSyntax.noReturns = true

Note: Limited complexity enforcement — Scala's linting ecosystem is weaker on metrics.

linters.json entry:

{
  "name": "scalafix",
  "language": "scala",
  "command": "scalafix --check .",
  "autofix_command": "scalafix .",
  "safe_autofix": true,
  "glob": "*.scala",
  "strict_rules_applied": true
}

Haskell — HLint

Install:

brew install hlint

Strict rules (create .hlint.yaml):

- warn: {name: "Use fewer imports"}
- warn: {name: "Redundant bracket"}
- warn: {name: "Eta reduce"}
- warn: {name: "Use newtype instead of data"}
- suggest: {name: "Reduce duplication"}

Note: HLint is suggestions-based, not metrics-based. No cyclomatic complexity caps available.

linters.json entry:

{
  "name": "hlint",
  "language": "haskell",
  "command": "hlint .",
  "autofix_command": "hlint --refactor .",
  "safe_autofix": false,
  "glob": "*.hs",
  "strict_rules_applied": true
}

OCaml — ocamlformat (formatting only)

Install:

opam install ocamlformat

Config (create .ocamlformat):

version = 0.26.2
profile = default

Note: Formatting only — no complexity rules available for OCaml.

linters.json entry:

{
  "name": "ocamlformat",
  "language": "ocaml",
  "command": "ocamlformat --check .",
  "autofix_command": "ocamlformat -i",
  "safe_autofix": true,
  "glob": "*.ml",
  "strict_rules_applied": false
}

Lua — luacheck (limited)

Install:

brew install luacheck

Config (create .luacheckrc):

max_line_length = 120
max_code_line_length = 120
unused_args = true
unused_secondaries = true

Note: No cyclomatic complexity rules. Catches unused vars and basic style issues only.

linters.json entry:

{
  "name": "luacheck",
  "language": "lua",
  "command": "luacheck .",
  "autofix_command": "",
  "safe_autofix": false,
  "glob": "*.lua",
  "strict_rules_applied": false
}

Lean — No linter available

Report: "Lean: No complexity linter available. lake build catches type errors but no complexity metrics exist. Skipping."

Add to unsupported array in linters.json.

Unison — No linter available

Report: "Unison: No linter available. Skipping."

Add to unsupported array in linters.json.

Step 5: Generate .claude/linters.json

After installing and configuring linters, generate the config file:

mkdir -p .claude

Write .claude/linters.json with entries for each configured linter, using the exact JSON entries shown above. Include:

{
  "version": 1,
  "linters": [
    // ... one entry per configured linter from the tables above
  ],
  "unsupported": ["lean", "unison"],
  "settings": {
    "stop_hook_enabled": true,
    "max_output_lines": 500,
    "timeout_per_linter_seconds": 30
  }
}

Step 6: Install Stop Hook

Only install the Stop hook if the user explicitly approved lint-guard in the earlier approval step (Step 3). If they declined or deferred, skip hook installation entirely.

Copy the lint-on-stop.sh template to the project and register it:

# Copy the Stop hook script
mkdir -p .claude/hooks
cp "${CLAUDE_PLUGIN_ROOT}/hooks/lint/lint-on-stop.sh" .claude/hooks/lint-on-stop.sh
chmod +x .claude/hooks/lint-on-stop.sh

Then add the Stop hook entry to .claude/settings.json. Read the existing file first (create if missing), and add:

{
  "hooks": {
    "Stop": [
      {
        "hooks": [
          {
            "type": "command",
            "command": ".claude/hooks/lint-on-stop.sh",
            "timeout": 60
          }
        ]
      }
    ]
  }
}

If .claude/settings.json already has a hooks.Stop array, append to it rather than overwriting.

Step 7: Report Success

Print a summary:

Lint Guard setup complete!

Configured linters:
- [ESLint] TypeScript/JavaScript — strict complexity rules enabled
- [ruff] Python — strict complexity rules enabled
  
Unsupported (no linter available):
- Lean
- Unison

Files created/modified:
- .claude/linters.json (linter configuration)
- .claude/hooks/lint-on-stop.sh (Stop hook script)
- .claude/settings.json (Stop hook registration)
- [linter config files created/modified]

The Stop hook will now run linters on changed files after every response.
Set LINT_GUARD_SKIP=1 to disable for a session.

Environment Variable

LINT_GUARD_SKIP=1 — disables the Stop hook for the current session. Useful for:

• Exploratory work where lint noise is unwanted
• Debugging linter configuration
• Non-code focused sessions

The SessionStart detection hook is NOT affected — it still checks and offers setup.