القائمة
Add OSC (Open Sound Control) support to queneo-editor for network-based QuNeo communication — pyliblo implementation, QuNeOSC Bridge addresses
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Use when working with the Sleepy Circuits Hypno 2 video synthesizer/resampler — 2-channel video mixer/looper, shader engine, MIDI CC mapping, CV/modulation, sampler. Firmware v0.0.163+.
Hardware instrument skills — reference guides for each device in the music studio setup.
GLSL fragment shader techniques adapted for the Hypno 2 video synthesizer — single-pass generative visuals and video effects optimized for Raspberry Pi 5, 5-uniform limit, CC-mapped parameters
Korg KAOSS DJ — USB DJ controller with X-Y touchpad, Serato DJ Intro integration, KAOSS effects, EQ, crossfader, and MIDI on Linux
Korg KAOSSILATOR dynamic phrase synthesizer (2007 model) — X-Y touchpad, 100 programs, gate arpeggiator, phrase loop recording, USB MIDI on Linux
Use when working with the Korg kaossilator 2S dynamic phrase synthesizer — X-Y touchpad, 150 programs, 50 arp patterns, loop recording, audio player, master recorder, microSD storage, and USB MIDI on Linux.
| name | quneo-osc-integration |
| description | Add OSC (Open Sound Control) support to queneo-editor for network-based QuNeo communication — pyliblo implementation, QuNeOSC Bridge addresses |
| category | quneo |
Add OSC support to queneo-editor for network-based communication with the QuNeo controller.
Output addresses (QuNeo to OSC):
/quneo/pads/{0-15}/drum/note_velocity # 0-127
/quneo/pads/{0-15}/drum/pressure # 0-127
/quneo/pads/{0-15}/drum/x # 0-127 (center=63)
/quneo/pads/{0-15}/drum/y # 0-127 (center=63)
/quneo/hSliders/{0-3}/note_velocity
/quneo/hSliders/{0-3}/pressure
/quneo/hSliders/{0-3}/location # 0-127
/quneo/vSliders/{0-3}/note_velocity
/quneo/vSliders/{0-3}/pressure
/quneo/vSliders/{0-3}/location
/quneo/longSlider/{note_velocity,pressure,location,width}
/quneo/rotary/{0-1}/{note_velocity,pressure,direction,location}
/quneo/upButton/{0-1}/{note_velocity,pressure}
/quneo/downButton/{0-1}/{note_velocity,pressure}
/quneo/leftButton/{0-3}/{note_velocity,pressure}
/quneo/rightButton/{0-3}/{note_velocity,pressure}
/quneo/rhombus/{note_velocity,pressure}
/quneo/modeButton/{note_velocity,pressure}
/quneo/transport/{0-2}/{note_velocity,pressure}
LED control addresses (OSC to QuNeo, float 0.0-1.0):
/quneo/leds/pads/{0-15}/green
/quneo/leds/pads/{0-15}/red
/quneo/leds/hSliders/{0-3}/{0-7} # segments
/quneo/leds/vSliders/{0-3}/{0-7}
/quneo/leds/rotaries/{0-1}/{0-11} # 12 segments
/quneo/leds/longslider/{0-15}
/quneo/leds/upButton/{0-1}
/quneo/leds/downButton/{0-1}
/quneo/leds/leftButton/{0-1}
/quneo/leds/rightButton/{0-1}
/quneo/leds/rhombus
/quneo/leds/modeButton
/quneo/leds/transportButtons/{0-2}
Default network config:
WARNING: pyliblo callback signature is (path, types, args, src) — NOT (path, args, types, src).
import liblo
# Send LED brightness (float 0.0-1.0, NOT 0-255)
target = liblo.Address("127.0.0.1", 3478) # QuNeOSC Bridge input (LED control)
target.send("/quneo/leds/pads/0/green", 0.75)
# Receive OSC from QuNeOSC Bridge
server = liblo.Server(7469)
def callback(path, types, args, src):
# types e.g. 'fi' means float then int
print(f"{path}: {dict(zip(types, args))}")
server.add_method(None, None, callback)
server.start()
Key patterns:
# QuNeoOSC — direct OSC LED control
osc = QuNeoOSC(target_host="127.0.0.1", target_port=3478, recv_port=7469)
osc.set_pad_led(pad=0, color="green", brightness=0.75) # pad 0-15
osc.set_rotary_led(rotary=0, segment=5, brightness=1.0) # rotary 0-1, segment 0-11
# QuNeoHybrid — MIDI SysEx preset upload + OSC LED control (RECOMMENDED)
hybrid = QuNeoHybrid(use_osc=True)
hybrid.flash_preset(preset, slot=0) # MIDI SysEx preset upload
hybrid.set_all_pads_led("green", 0.5) # OSC LED control
hybrid.blink_all_pads(duration=2.0, interval=0.5, color="green")
Default ports:
| Component | Address Pattern | Range |
|---|---|---|
| Pads | /quneo/leds/pads/{0-15}/{green,red} | 0.0-1.0 |
| Rotaries | /quneo/leds/rotaries/{0-1}/{0-11} | 0.0-1.0 |
| HSliders | /quneo/leds/hSliders/{0-3}/{0-7} | 0.0-1.0 |
| VSliders | /quneo/leds/vSliders/{0-3}/{0-7} | 0.0-1.0 |
| LongSlider | /quneo/leds/longslider/{0-15} | 0.0-1.0 |
| Buttons | /quneo/leds/{upButton,downButton,leftButton,rightButton,rhombus,modeButton} | 0.0-1.0 |
| Transport | /quneo/leds/transportButtons/{0-2} | 0.0-1.0 |
For reverse-engineering QuNeOSC Bridge:
Use strings, objdump, or ghidra to extract OSC address tables and port configs.
| Repo | Path |
|---|---|
| queneo-editor | ~/Documents/git/queneo-editor/ (Python TDD, osc_service.py) |
| node-quneo | ~/Documents/git/node-quneo/ (JS module with getPadLedsPath) |
| ofxQuNeo | ~/Documents/git/ofxQuNeo/ (openFrameworks + OSC) |