القائمة
Use when capturing SEGGER RTT over ST-Link via memory polling, or when implementing and diagnosing strtt-style RTT control-block scanning and ring-buffer polling.
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
استنادا إلى تصنيف SOC المهني
Use when acquiring STM32 runtime data from global symbols, memory regions, stack-published local slots, or RTT channels and converting captures into structured artifacts for analysis.
Use when debugging STM32 applications with J-Link or ST-Link, including breakpoints, watchpoints, register or memory inspection, HardFault analysis, and automated fault-context capture.
Use when flashing STM32 firmware, verifying flash results, diagnosing download failures, or running repeatable CLI-based flash workflows.
Use when building a closed STM32-to-Matlab workflow for J-Link HSS data capture, system identification, PID/LQR/MPC tuning, Kalman parameter estimation, or Matlab/Simulink code-generation feedback loops.
Use when preparing, auditing, repairing, or launching SEGGER Ozone STM32 debug projects (.jdebug / .jdebug.user). Trigger this skill when Ozone shows stale Windows paths, wrong ELF/SVD/device/interface settings, missing FreeRTOS awareness, duplicated case-variant project files, stale fixed J-Link serial bindings, or when a user wants a ready-to-debug Ozone session opened from the current STM32 project.
Use when capturing STM32 RTT output through the current J-Link mainline, validating runtime behavior after flash/reset, or collecting short runtime evidence from J-Link RTT channels.
| name | bfd-strtt-rtt |
| description | Use when capturing SEGGER RTT over ST-Link via memory polling, or when implementing and diagnosing strtt-style RTT control-block scanning and ring-buffer polling. |
Use this skill for polling-based ST-Link RTT workflows inspired by strtt. This skill is independent from J-Link RTT and independent from J-Link HSS.
python3 ./.codex/skills/bfd-project-init/scripts/bootstrap.py --project-root . --mode check
python3 BFD-Kit/scripts/bfd_stlink_rtt.py \
--elf "${STM32_ELF}" \
--role boot \
--duration 5 \
--output logs/rtt/stlink_rtt.log
_SEGGER_RTT from ELF when possible.STM32_RTT_SCAN_WINDOW for "SEGGER RTT".SEGGER_RTT_CB and buffer descriptors.RdOff after host-side consumption.bfd-data-acquisition.bfd-rtt-logger for native J-Link RTT instead of this skill.bfd-rtt-loggerbfd-stlink-interfacebfd-data-acquisition