القائمة
Guide on producing the following docs for a hardware project: rendered schematic sheet, pin maps, BOM, and design notes.
التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.
Read this before starting to work on hardware projects.
Shop at online stores that speak the Universal Commerce Protocol (UCP) — run discovery, cart, and checkout over UCP's REST API and pay with Prava mandate credentials. Use when the user asks to buy, order, or purchase something online, wants to track an order, or mentions UCP or agentic checkout.
Guide on authoring valid .kicad_sch / .kicad_pro files as text: the live KiCad s-expression format and kicad-cli validation. Use when writing, generating, or editing a KiCad schematic or project by hand. Only use when the user explicitly requests KiCAD or PCBs.
Use when creating artifacts (rendered markdown docs, HTML pages, or self-contained React UI) for design previews, interactive mocks, or durable docs that can be iterated on.
| name | hardware-project-docs |
| description | Guide on producing the following docs for a hardware project: rendered schematic sheet, pin maps, BOM, and design notes. |
This skill is not an electronics-design course.
Circuit facts should come from current datasheets and/or supplier descriptions, not from memory.
Check with scrape_url / web_search.
All documents should stay in sync. Always.
Should be created as $artifacts and project files.
One schematic change means checking all four. Net names are the glue: the same name appears on the sheet, in the pin map, and in the notes.
All the parts should be listed in a tabular format along with their datasheet (if any), quantity, price, links to buy, and any relevant notes on why the part is needed. Ask which parts the user has (or wants) before conducting your own research. Don't directly use an IC or similar. It's recommended to use its breakout board or similar instead. Prefer going with boards which have headers pre-soldered, unless asked otherwise. Research the web for the parts you need for the project, look for the cheapest options which will fit the project's requirements well. Don't make price the sole factor while researching parts, their quality and ease of use also matters. Try to find parts from local suppliers that are from the user's state/country. Ex. if the user lives in India, don't immediately go to US stores like Adafruit, Sparkfun, Digikey, etc to find parts. Before deciding to go with a particular supplier, always read online reviews for that supplier from other buyers to ensure the store isn't fraudulent. Always go through relevant supplier descriptions, datasheet, and other specs before deciding on a part.
Should be a markdown table. One row per net; gotcha rows for input-only and boot-strapping pins of the specific MCU. Net names should be consistent across them.
The artifact is a React component (App) whose output is a single element containing all the schematic geometry. Start from the below sample schematic. It's a verified, collision-checked artifact that implements every convention below; copy its structure and scale it.
function App() {
const W = 1500,
H = 720;
const C = {
wire: '#46525f',
sig: '#2e86e0',
pwr: '#e5484d',
gnd: '#30a46c',
box: '#1c1e21',
mech: '#8b95a1',
stby: '#8e5cd0',
pin: '#edf1f5', // pin names on dark boxes
pinOn: '#5f6b78' // pin names on the light sheet background
};
const dots = [];
for (let gx = 25; gx < W; gx += 25)
for (let gy = 25; gy < H; gy += 25)
dots.push(<circle key={`${gx}-${gy}`} cx={gx} cy={gy} r={0.8} fill="#e6ebf1" />);
const Txt = ({ x, y, size = 12, color = C.box, bold = false, anchor, mono = true, children }) => (
<text
x={x}
y={y}
fontSize={size}
fill={color}
textAnchor={anchor}
fontWeight={bold ? 'bold' : 'normal'}
fontFamily={mono ? 'Consolas, Menlo, monospace' : 'Inter, Arial, sans-serif'}
>
{children}
</text>
);
const Box = ({ x, y, w, h, fill, edge }) => (
<rect x={x} y={y} width={w} height={h} fill={fill} stroke={edge} strokeWidth={1.8} rx={7} />
);
const Zone = ({ x, y, dark, title, sub }) => (
<g>
<Txt x={x} y={y} size={14} color={dark ? '#eef1f4' : C.box} bold anchor="middle" mono={false}>
{title}
</Txt>
{sub && (
<Txt
x={x}
y={y + 16}
size={11}
color={dark ? '#cdd7e0' : '#5b6570'}
anchor="middle"
mono={false}
>
{sub}
</Txt>
)}
</g>
);
// Pin name inside the box, net name on the stub outside.
const Pin = ({ x, y, side, pinName, net, color = C.sig }) => {
const sx = side === 'R' ? x + 20 : x - 20;
const tx = side === 'R' ? sx + 5 : sx - 5;
return (
<g>
{pinName && (
<Txt
x={side === 'R' ? x - 6 : x + 6}
y={y + 4}
size={10}
color={C.pin}
anchor={side === 'R' ? 'end' : 'start'}
>
{pinName}
</Txt>
)}
<line x1={x} y1={y} x2={sx} y2={y} stroke={C.wire} strokeWidth={1.6} />
<Txt
x={side === 'R' ? tx : tx}
y={y + 4}
color={color}
bold
anchor={side === 'R' ? 'start' : 'end'}
>
{net}
</Txt>
</g>
);
};
const Gnd = ({ x, y, dir }) =>
dir === 'D' ? (
<g stroke={C.gnd} strokeWidth={2}>
<line x1={x} y1={y} x2={x} y2={y + 8} strokeWidth={1.6} />
<line x1={x - 8} y1={y + 8} x2={x + 8} y2={y + 8} />
<line x1={x - 5} y1={y + 12} x2={x + 5} y2={y + 12} />
<line x1={x - 2} y1={y + 16} x2={x + 2} y2={y + 16} />
</g>
) : (
<g stroke={C.gnd} strokeWidth={2}>
<line x1={x} y1={y} x2={x - 6} y2={y} strokeWidth={1.6} />
<line x1={x - 6} y1={y - 8} x2={x - 6} y2={y + 8} />
<line x1={x - 10} y1={y - 5} x2={x - 10} y2={y + 5} />
<line x1={x - 14} y1={y - 2} x2={x - 14} y2={y + 2} />
</g>
);
const Wire = (x1, y1, x2, y2, color = C.wire, w = 1.6) => (
<line x1={x1} y1={y1} x2={x2} y2={y2} stroke={color} strokeWidth={w} strokeLinecap="round" />
);
// real-hardware colours
const F = {
power: '#e0483f',
powerEdge: '#a83228', // red LiPo pack
buck: '#2a6db0',
buckEdge: '#1a4d80', // blue buck PCB
mcu: '#23272c',
mcuEdge: '#4a5058', // black dev kit
drv: '#4d7f4a',
drvEdge: '#35592f', // green driver breakout
motor: '#d3d8dc',
motorEdge: '#8f979e', // silver gearmotor
enc: '#20419a',
encEdge: '#152c6b', // blue encoder PCB
legend: '#ffffff'
};
const mcu = { x: 480, y: 210, w: 300, h: 380 };
const mcuRight = [
['GPIO25', 'M1_PWM'],
['GPIO26', 'M1_IN1'],
['GPIO27', 'M1_IN2'],
['GPIO14', 'M2_PWM'],
['GPIO12', 'M2_IN1'],
['GPIO13', 'M2_IN2'],
['GPIO4', 'STBY']
];
const encPins = [
['G34', 'E1A'],
['G35', 'E1B'],
['G32', 'E2A'],
['G33', 'E2B']
];
const Driver = ({ x, y, name, mA, mB }) => {
const leftPins = [
['VM', 'VM', C.pwr],
['VCC', '+5V', C.pwr],
['GND', null],
['STBY', 'STBY', C.stby],
['PWMA', mA + '_PWM'],
['AIN1', mA + '_IN1'],
['AIN2', mA + '_IN2'],
['PWMB', mB + '_PWM'],
['BIN1', mB + '_IN1'],
['BIN2', mB + '_IN2']
];
const outs = [
['AO1', y + 70],
['AO2', y + 110],
['BO1', y + 250],
['BO2', y + 290]
];
return (
<g>
<Box x={x} y={y} w={250} h={330} fill={F.drv} edge={F.drvEdge} />
<Zone x={x + 125} y={y + 22} dark title={name} sub="dual H-bridge" />
{leftPins.map((p, i) => {
const py = y + 50 + i * 29;
return !p[1] ? (
<g key={p[0]}>
<Txt x={x + 6} y={py + 4} size={10} color={C.pin} anchor="start">
GND
</Txt>
{Wire(x, py, x - 20, py)}
<Gnd x={x - 20} y={py} dir="L" />
</g>
) : (
<Pin key={p[0]} x={x} y={py} side="L" pinName={p[0]} net={p[1]} color={p[2] || C.sig} />
);
})}
{outs.map((o) => (
<g key={o[0]}>
<Txt x={x + 244} y={o[1] + 4} size={10} color={C.pin} anchor="end">
{o[0]}
</Txt>
{Wire(x + 250, o[1], x + 272, o[1])}
</g>
))}
</g>
);
};
const d1 = { x: 950, ao1: 210, ao2: 250, bo1: 390, bo2: 430 };
// Each motor draws exactly its own two wires from its driver channel.
// pinA height equals the M+ terminal height (straight run); pinB drops
// with one jog, clear of the encoder box below.
const Motor = ({ cx, cy, name, enc, drv, pinA, pinB }) => {
const t1y = cy - 10,
t2y = cy + 10,
tx = cx - 24;
const eb = { x: cx - 60, y: cy + 42, w: 120, h: 84 };
const lane = drv.x + 272;
return (
<g>
{Wire(lane, pinA, tx, pinA)}
{Wire(lane, pinB, tx - 28, pinB)}
{Wire(tx - 28, pinB, tx - 28, t2y)}
{Wire(tx - 28, t2y, tx, t2y)}
<circle cx={tx} cy={t1y} r={2.5} fill={C.wire} />
<circle cx={tx} cy={t2y} r={2.5} fill={C.wire} />
<Txt x={tx - 6} y={t1y + 3} size={9} color={C.pinOn} anchor="end">
M+
</Txt>
<Txt x={tx - 6} y={t2y + 3} size={9} color={C.pinOn} anchor="end">
M−
</Txt>
<circle cx={cx} cy={cy} r={24} fill={F.motor} stroke={F.motorEdge} strokeWidth={2} />
<Txt x={cx} y={cy + 6} size={18} bold anchor="middle">
M
</Txt>
<Txt x={cx} y={cy - 32} size={13} bold anchor="middle" mono={false}>
{name}
</Txt>
<line
x1={cx}
y1={cy + 24}
x2={cx}
y2={eb.y}
stroke={C.mech}
strokeWidth={1.5}
strokeDasharray="5 4"
/>
<rect
x={eb.x}
y={eb.y}
width={eb.w}
height={eb.h}
fill={F.enc}
stroke={F.encEdge}
strokeWidth={1.6}
rx={7}
/>
<Zone x={eb.x + eb.w / 2} y={eb.y + 18} dark title={enc} />
<Pin x={eb.x} y={eb.y + 48} side="L" pinName="VCC" net="+5V" color={C.pwr} />
<Txt x={eb.x + 6} y={eb.y + 68} size={10} color={C.pin} anchor="start">
GND
</Txt>
{Wire(eb.x, eb.y + 64, eb.x - 20, eb.y + 64)}
<Gnd x={eb.x - 20} y={eb.y + 64} dir="L" />
<Pin x={eb.x} y={eb.y + 80} side="L" pinName="A" net={name + 'A'} />
<Pin x={eb.x + eb.w} y={eb.y + 80} side="R" pinName="B" net={name + 'B'} />
</g>
);
};
return (
<div
style={{
fontFamily: 'Inter, "Segoe UI", Arial, sans-serif',
background: '#f1f4f8',
minHeight: '100vh',
color: C.box
}}
>
<header style={{ padding: '18px 28px 6px' }}>
<h1 style={{ margin: '0 0 4px', fontSize: 20 }}>
Sample — 2× DC Gearmotor with Quadrature Encoders
</h1>
<p style={{ margin: 0, color: '#555', fontSize: 13 }}>
Pin names inside components; nets with matching labels are connected.
</p>
</header>
<div
style={{
background: '#fafcfd',
margin: '14px 28px 28px',
border: '1px solid #dde3ea',
borderRadius: 10,
overflowX: 'auto',
boxShadow: '0 1px 4px rgba(30,40,60,.08)'
}}
>
<svg viewBox={`0 0 ${W} ${H}`} width="100%" style={{ minWidth: 1100, display: 'block' }}>
{dots}
{/* power entry */}
<Box x={60} y={150} w={160} h={90} fill={F.power} edge={F.powerEdge} />
<Zone x={140} y={172} dark title="BT1" sub="3S LiPo 11.1 V" />
{Wire(220, 172, 265, 172, C.pwr)}
<circle cx={268} cy={172} r={2.5} fill={C.wire} />
<circle cx={300} cy={172} r={2.5} fill={C.wire} />
{Wire(268, 172, 296, 158)}
{Wire(300, 172, 330, 172, C.pwr)}
<Txt x={284} y={150} size={11} color="#39424c" anchor="middle">
S1
</Txt>
{Wire(300, 172, 420, 172, C.pwr)}
<Pin x={420} y={172} side="R" net="VM (11.1 V)" color={C.pwr} />
{Wire(220, 218, 250, 218)}
<Gnd x={250} y={218} dir="D" />
{/* buck */}
<Box x={60} y={380} w={210} h={110} fill={F.buck} edge={F.buckEdge} />
<Zone x={165} y={402} dark title="U4 · LM2596 BUCK" sub="11.1 V → 5.0 V" />
<Pin x={60} y={430} side="L" pinName="VIN" net="VM" color={C.pwr} />
<Txt x={66} y={469} size={10} color={C.pin} anchor="start">
GND
</Txt>
<Gnd x={60} y={465} dir="L" />
<Pin x={270} y={430} side="R" pinName="VOUT" net="+5V" color={C.pwr} />
{/* legend */}
<Box x={60} y={560} w={330} h={120} fill={F.legend} edge="#dde3ea" />
<Zone x={225} y={582} title="LEGEND" />
{Wire(80, 600, 120, 600, C.pwr, 2.5)}
<Txt x={130} y={604} size={11} mono={false}>
power rail
</Txt>
{Wire(80, 625, 120, 625, C.sig, 2.5)}
<Txt x={130} y={629} size={11} mono={false}>
signal net
</Txt>
<Gnd x={95} y={650} dir="D" />
<Txt x={130} y={657} size={11} mono={false}>
common ground
</Txt>
{/* MCU */}
<Box x={mcu.x} y={mcu.y} w={mcu.w} h={mcu.h} fill={F.mcu} edge={F.mcuEdge} />
<Zone
x={mcu.x + mcu.w / 2}
y={mcu.y + 22}
dark
title="U1 · ESP32 DEVKIT"
sub="3.3 V logic"
/>
<Pin x={mcu.x} y={300} side="L" pinName="5V" net="+5V" color={C.pwr} />
<Txt x={mcu.x + 6} y={354} size={10} color={C.pin} anchor="start">
GND
</Txt>
<Gnd x={mcu.x} y={350} dir="L" />
{mcuRight.map((p, i) => (
<Pin
key={p[1]}
x={mcu.x + mcu.w}
y={250 + i * 34}
side="R"
pinName={p[0]}
net={p[1]}
color={p[1] === 'STBY' ? C.stby : C.sig}
/>
))}
{/* encoder inputs — lower left edge of the same U1 symbol */}
<Txt x={mcu.x + 10} y={470} size={10} color="#aeb6c0" anchor="start" mono={false}>
ENCODER INPUTS · PCNT
</Txt>
{encPins.map((p, i) => (
<Pin key={p[0]} x={mcu.x} y={500 + i * 26} side="L" pinName={p[0]} net={p[1]} />
))}
{/* driver + motors */}
<Driver x={950} y={140} name="U2 · TB6612FNG" mA="M1" mB="M2" />
<Motor cx={1360} cy={220} name="M1" enc="ENC1" drv={d1} pinA={d1.ao1} pinB={d1.ao2} />
<Motor cx={1360} cy={400} name="M2" enc="ENC2" drv={d1} pinA={d1.bo1} pinB={d1.bo2} />
</svg>
</div>
</div>
);
}
These are what make the sheet read like a CAD schematic rather than a diagram.
GPIO25, PWMA, VIN); the wire stub outside carries only the net name (M1_PWM, VM). Never annotate the same fact twice.VM, +5V), never drawn end-to-end. Ground is a ground symbol, one per pin, all common.#edf1f5) for pin names on dark boxes; dark slate (#5f6b78) for labels on the light sheet background. A single "bright" colour fails one of the two.Don't eyeball coordinates:
Include the following, if needed:
In your response don't include the nitty-gritty details of how you made the artifacts, etc. Tell the user more about the project and design decisions. Tell the user about what files and artifacts you wrote, and how they can view the artifacts (right sidebar in the Sprocket UI).