read-write-memory

name	read-write-memory
description	Read and write process memory — all data types, safety rules, and concrete examples via CLI, TCP, or bridge

/probe:rw

Read and write process memory. Covers every data type, all three command delivery methods, safety rules, and copy-paste examples.

How to Send Commands

ARC Probe commands can be sent three ways. Use whichever is available:

1. CLI (simplest)

probe.exe <command>

Returns JSON to stdout. Exit code 0 = success, 1 = error.

probe.exe "read_int 0x7FFB0A8D0000+0x354"
# {"ok":true,"data":{"value":100}}

probe.exe "write_int 0x055EA1C28FE8+0x50 1"
# {"ok":true,"data":{"bytes_written":4}}

If probe.exe is not in PATH, use the full path to the build directory.

2. TCP (direct)

Connect to 127.0.0.1:9998 and send commands as newline-terminated strings:

$tcp = New-Object System.Net.Sockets.TcpClient('127.0.0.1', 9998)
$s = $tcp.GetStream()
$w = New-Object System.IO.StreamWriter($s); $w.AutoFlush = $true
$r = New-Object System.IO.StreamReader($s)
$w.WriteLine('read_int 0x7FFB0A8D0000+0x354')
$r.ReadLine()
$tcp.Close()

3. HTTP Bridge (when GUI is running)

curl -s -X POST http://localhost:9996 \
  -H "Content-Type: application/json" \
  -d '{"action":"probe","command":"read_int 0x7FFB0A8D0000+0x354"}'

The bridge wraps the response: {"ok":true,"data":{"ok":true,"data":{...}}}. Outer ok = bridge status, inner = probe response.

Address Formats

All addresses are hexadecimal. Accepted formats:

Format	Example
With 0x prefix	0x7FF612340000
Without prefix	7FF612340000
Module-relative	client.dll+0x2E76FE8
Offset arithmetic	0x055EA1C28FE8+0x50

To get module bases: modules list

---

Reading Memory

read — Raw bytes (hex string)

read <addr> <size>

Returns up to 4096 bytes as a hex string. Use for opcode bytes, raw binary data, or when you need exact byte values.

probe.exe "read 0x7FFB0A8D0000 16"
# {"ok":true,"data":{"hex":"4D5A9000030000000400...","size":16}}

read_ptr — 8-byte pointer

read_ptr <addr>

Reads an 8-byte (64-bit) pointer value. Use for following pointer fields in structs, reading vtable pointers, or any 8-byte address.

probe.exe "read_ptr 0x055EA1C28FE8"
# {"ok":true,"data":{"value":"0x7FFB22EA1000"}}

read_int — 32-bit integer

read_int <addr>

Reads a signed 32-bit integer. Use for health, team numbers, enum values, counts, flags.

probe.exe "read_int 0x055EA1C28FE8+0x354"
# {"ok":true,"data":{"value":100}}

read_float — 32-bit float

read_float <addr>

Reads a 32-bit float. Use for positions, angles, speed, cooldown timers.

probe.exe "read_float 0x055EA1C28FE8+0x40"
# {"ok":true,"data":{"value":1234.5}}

read_string — Null-terminated string

read_string <addr> [max_length]

Reads a null-terminated ASCII string. Default max 256 bytes. Use for entity names, class names, debug text.

probe.exe "read_string 0x7FFB22EA4098"
# {"ok":true,"data":{"value":"player_controller","length":17}}

read_chain — Follow pointer chain

read_chain <addr> <off1> <off2> ...

Each offset: add to current address, dereference (read 8-byte pointer), move to result. Last value is the final read. Use for navigating nested structs.

# EntityList → first chunk → first entity pointer
probe.exe "read_chain client.dll+0x3862C28 0x10 0x0"
# {"ok":true,"data":{"value":"0x055EA1C28FE8"}}

dump — Hex dump with ASCII

dump <addr> <size>

Max 256 bytes. Returns formatted hex dump with ASCII sidebar. Use for visual inspection of unknown memory.

probe.exe "dump 0x055EA1C28FE8 64"

---

Writing Memory

CRITICAL SAFETY RULES:

1. Always read before writing. Record the original value so you can restore it.
2. Never write to code sections unless intentionally patching instructions.
3. Verify the address is valid — read it first. If the read fails, do not write.
4. Prefer data sections (heap, globals, stack) over code sections.
5. Small writes only — write the minimum bytes needed.

write — Raw hex bytes

write <addr> <hex_bytes>

Writes raw bytes. Use for patching instructions (NOP = 90, INT3 = CC), writing arbitrary byte sequences.

# Read original bytes first!
probe.exe "read 0x7FFB21234000 5"
# {"ok":true,"data":{"hex":"E8AB123400"}}

# NOP out a 5-byte CALL instruction
probe.exe "write 0x7FFB21234000 9090909090"
# {"ok":true,"data":{"bytes_written":5}}

# RESTORE original bytes when done
probe.exe "write 0x7FFB21234000 E8AB123400"

write_int — 32-bit integer

write_int <addr> <value>

Writes a signed 32-bit integer. Use for health, flags, counters, enum values.

# Read current value
probe.exe "read_int 0x055EA1C28FE8+0x354"
# {"ok":true,"data":{"value":100}}

# Set health to 999
probe.exe "write_int 0x055EA1C28FE8+0x354 999"
# {"ok":true,"data":{"bytes_written":4}}

# Enable a bool (stored as int32)
probe.exe "write_int 0x055EA1C29038 1"
# {"ok":true,"data":{"bytes_written":4}}

write_float — 32-bit float

write_float <addr> <value>

Writes a 32-bit float. Use for positions, speed multipliers, timers.

# Read current position
probe.exe "read_float 0x055EA1C28FE8+0x40"
# {"ok":true,"data":{"value":1234.5}}

# Modify position
probe.exe "write_float 0x055EA1C28FE8+0x40 5000.0"

write_ptr — 8-byte pointer

write_ptr <addr> <value>

Writes an 8-byte pointer value. Use for redirecting pointers, modifying vtable entries (dangerous).

# Read current pointer
probe.exe "read_ptr 0x055EA1C28FE8+0x330"
# {"ok":true,"data":{"value":"0x055EB2340000"}}

# Overwrite pointer (be very careful!)
probe.exe "write_ptr 0x055EA1C28FE8+0x330 0x055EB2350000"

---

Common Recipes

Toggle a boolean field

# Read current value
probe.exe "read_int 0x055EA1C29038"
# 0 = off

# Enable it
probe.exe "write_int 0x055EA1C29038 1"

# Disable it
probe.exe "write_int 0x055EA1C29038 0"

Set health to max

# Read max health
probe.exe "read_int 0x055EA1C28FE8+0x350"
# {"ok":true,"data":{"value":625}}

# Read current health
probe.exe "read_int 0x055EA1C28FE8+0x354"
# {"ok":true,"data":{"value":100}}

# Set current = max
probe.exe "write_int 0x055EA1C28FE8+0x354 625"

NOP a function call (skip it)

# Read the CALL instruction bytes (5 bytes for E8 calls)
probe.exe "read 0x7FFB21234000 5"
# Save: E8 AB 12 34 00

# NOP it out
probe.exe "write 0x7FFB21234000 9090909090"

# Restore later
probe.exe "write 0x7FFB21234000 E8AB123400"

Modify a float via bridge batch

curl -s -X POST http://localhost:9996 -H "Content-Type: application/json" -d '{
  "action":"batch","actions":[
    {"action":"activity","status":"working","message":"Writing memory..."},
    {"action":"probe","command":"read_float 0x055EA1C28FE8+0x40"},
    {"action":"probe","command":"write_float 0x055EA1C28FE8+0x40 5000.0"},
    {"action":"probe","command":"read_float 0x055EA1C28FE8+0x40"},
    {"action":"activity","status":"idle","message":"Done"}
  ]
}'

---

Error Handling

Error	Cause	Fix
"error":"Invalid address"	Address format wrong	Use hex with or without 0x prefix
"error":"Read failed"	Address not readable	Verify with dump first; entity may be dead or freed
"error":"Write failed"	Address not writable	Code sections are read-only; data/heap is writable
"error":"Connection refused"	Probe not running	Inject DLL first, or check port 9998
"error":"Size exceeds maximum"	Read >4096 bytes	Split into multiple reads

Tips

• modules list gives you base addresses — add offsets to get absolute addresses
• Entity addresses change every match — use pointer chains, not hardcoded addresses
• Writing to networked values (health, position) may be overwritten by the server on the next tick
• Hardware breakpoints (hwbp set <addr> w 4) let you find what code writes to an address — useful for finding where to patch
• watch <addr> <size> polls for changes — use this to verify your writes are sticking
• Bool fields in Source 2 are sometimes stored as int32 (4 bytes) and sometimes as uint8 (1 byte) — check the schema dump