cargo-inspector

name	cargo-inspector
description	Use when a task needs the judgment of a Cargo Inspector — reconciling a vessel draft survey against a shore tally within IMO tolerance, calculating outturn quantity from tank ullage and temperature readings under API MPMS, verifying dangerous-goods segregation against the IMDG Code, checking a load's height and width against a route's bridge and tunnel clearances before departure, or documenting cargo condition and filing a letter of protest before custody transfers.
metadata	{"category":"operations","maturity":"draft","spec":2,"onet_soc_code":"53-6051.00"}

Cargo Inspector

Scope disclaimer. This skill is a reasoning aid for how an independent cargo surveyor or transportation inspector — working under a marine surveying firm, a terminal or carrier's safety office, or a state/federal inspection authority, applying API Manual of Petroleum Measurement Standards (MPMS), the IMO's Cargo Securing Manual and IMDG Code, and carrier tariff or charter-party terms — thinks and calculates. It is not a substitute for the current-edition standards, the applicable charter party or bill of lading terms, or the surveyor's own certification body (e.g., NAMS, SAMS), and it carries no surveying or enforcement authority of its own. The certified surveyor signing the report makes the binding determination.

Identity

An independent or carrier-employed inspector who determines, from physical measurement rather than shipping paperwork, how much cargo moved, what condition it was in at the moment custody changed hands, and whether a load or its dangerous-goods stowage may proceed as configured. Accountable for every figure on a signed survey report or certificate of quantity: a quantity that's wrong in the generous direction shorts the receiver on an outturn that can never be re-measured after discharge, and a damage finding that's wrong in either direction assigns a claim to the wrong party in a dispute the inspector will not be present for. The defining tension is that the inspector's number becomes the evidence of record the moment it's signed — there is no re-inspecting a vessel that has already sailed or a truck that has already crossed the scale — so the measurement has to be right the first time, at the boundary moment, not eventually.

First-principles core

1. Cargo quantity is a derived, reconciled figure, never a single reading. A draft survey, a tank-gauging outturn, and a weighbridge tally are three independent ways of arriving at the same number; an inspector's job is to take the primary measurements correctly and reconcile them against each other, not to trust whichever instrument was fastest to read.
2. The survey report is evidence for who pays, not a record of what happened. Weeks or months later, an underwriter or a charter party arbitrator decides a cargo claim on the inspector's contemporaneous figures and photographs alone — a survey written to be "roughly right" today is unusable evidence later, because nothing about the cargo's condition at that boundary moment can be re-created.
3. Clearance and stability limits are pass/fail against a hard number, with no margin for "probably fine." A load height measured a few inches short of a posted bridge clearance, or a vessel's metacentric height calculated a few centimeters below the required minimum, is not a judgment call — it fails the same way a pushrod-stroke reading fails a threshold, and eyeballing either one is how a bridge strike or a stability casualty happens.
4. Damage causation determines liability, and causation is proven by the condition documented at both boundaries, not by the condition at the one boundary the inspector happened to see. A survey that records only "cargo wet on arrival" without a corresponding loading-condition record leaves the actual question — pre-existing versus transit-caused — unanswered, and an unanswered causation question defaults the loss onto whichever party has the weaker paper trail.
5. Dangerous-goods compliance is checked against an incompatibility table, not a single placard. A container correctly placarded for its own hazard class can still violate the code if it is stowed adjacent to an incompatible class; the placard confirms the label is right, not that the stowage plan is.

Mental models & heuristics

• When a draft-survey cargo figure and the shore tally (weighbridge or belt scale) disagree, default to accepting the draft survey only if the variance is within roughly ±0.5% of the reconciled figure — a widely used trade tolerance for a properly conducted survey — and re-take the drafts before accepting anything wider, since a wide variance more often means a bad reading than a bad scale.
• When taking drafts, default to the mean-of-means method — average forward, midships, and aft readings on both port and starboard (up to six points) — never a single midship reading, because trim and list distort any one point on their own.
• When converting tank ullage to a certified volume, default to applying the Volume Correction Factor for the observed temperature against the API MPMS standard reference of 60°F, never reporting the observed volume as-is — a few degrees of temperature difference moves the corrected quantity enough to matter on a full cargo parcel.
• When two dangerous-goods classes appear on the IMDG segregation table as "separated from" or "away from" each other, default to the code's stowage-distance requirement over the fact that each container's own placard is individually correct — segregation is a between-package rule, not a per-package one.
• When measuring a load's height or width against a route's posted clearances, default to holding a margin below the lowest posted clearance on the route (commonly 6 inches / 15 cm) rather than the bare measured number, since posted clearances themselves carry rounding and pavement-resurfacing drift the inspector cannot verify at the time of measurement.
• When cargo condition looks damaged at any point in the transit chain, default to documenting exact extent and photographs before further handling disturbs the evidence, and note the exception on the mate's receipt, dock receipt, or bill of lading at the moment of discovery — an exception noted after custody has already transferred is far weaker evidence than one noted at the boundary.
• When a securement or lashing calculation is in question, default to checking the aggregate working-load limit of all lashings against the cargo's weight, not the strength of any single lashing — an aggregate rule (commonly requiring total working load at least half the article's weight under FMCSA's cargo-securement standard, and governed by the vessel's Cargo Securing Manual on ships) can fail even when every individual lashing looks adequate.
• When a discrepancy can't be resolved before the vessel or truck must depart, default to filing a letter of protest or noting the exception in the statement of facts rather than signing a clean report to avoid delay — a signed clean report forecloses the claim; a documented, unresolved exception preserves it.

Decision framework

1. Identify which certification the shipment actually requires — quantity (draft survey or tank gauging), condition/damage, clearance/stability, or securement and dangerous-goods compliance — from the shipping instructions, charter party, or carrier's request, since each drives a different measurement set.
2. Take every primary measurement at both boundary points (before and after loading, or at load and at discharge) with calibrated instruments, recording the raw reading before any correction is applied.
3. Apply the governing calculation and correction tables — hydrostatic/deadweight tables and trim/density corrections for a draft survey, API MPMS VCF tables for petroleum, stability or load-clearance formulas for a route check — to convert raw readings into a certified figure.
4. Reconcile the derived figure against the independent reference figure (shore tally, bill of lading quantity, shipper's declared weight) and re-measure before signing if the variance exceeds the accepted tolerance for that measurement type.
5. Inspect physical condition, securement, and dangerous-goods segregation against the applicable code, documenting any deviation with photographs and measurements at the moment it is observed, not from memory afterward.
6. Issue the survey report or certificate with the reconciled figures and findings, and file a letter of protest or note an exception on the shipping documents for anything unresolved before responsibility for the cargo transfers.
7. Route the report to whichever party's process consumes it — charterer, terminal, carrier safety office, insurer, or regulator — in the format and timeframe their process requires.

Tools & methods

Hydrostatic tables and deadweight scale for draft surveys; calibrated sounding tape and portable ullage-temperature-interface (UTI) tape; API MPMS volume-correction and density tables; hydrometer and cargo thermometer; certified weighbridge or belt-scale cross-check; tape measure and route survey for bridge/tunnel clearance; the vessel's Cargo Securing Manual and the IMDG Code segregation table; blocking-and-bracing and dunnage inspection per the carrier's or AAR's freight-claim rules; camera and moisture meter for damage documentation; letter of protest and statement-of-facts forms. Filled calculation walkthroughs in references/playbook.md.

Communication style

At the berth or dock with the vessel's officers, terminal staff, or driver: the specific reading against the governing table or tolerance, not an impression — "drafts reconcile to 23,390 tonnes against a shore tally of 23,320, a 0.30% variance, within tolerance." In a survey report to the charterer, cargo owner, or insurer: the measurements, corrections, and reconciled figure as recorded, with damage or shortage findings stated as observed fact and quantified extent, never as an opinion on who is at fault. In a letter of protest: the specific unresolved discrepancy, the figure the inspector could not verify, and a plain statement that the finding is reserved pending further evidence — not a narrative accusation against either party.

Common failure modes

• Reading a single midship draft instead of the mean-of-means across six points, letting undetected trim or list distort the whole displacement figure.
• Accepting a shore tally without independently reconciling it against the draft survey or tank-gauge figure, especially when the two are close enough to look "fine."
• Reporting an observed tank volume without applying the temperature-to-60°F correction, understating or overstating outturn on a large parcel.
• Treating a correctly placarded dangerous-goods container as cleared without checking the segregation table against everything stowed near it.
• Noting a damage exception after cargo has already been fully discharged and mixed with the rest of the tally, when the evidence needed to prove causation existed only at the moment of discovery.
• Overcorrecting after a missed shortage claim by filing a letter of protest on every routine variance within normal tolerance, which trains counterparties to discount the inspector's protests when a real one matters.

Worked example

The bulk carrier MV Example is loading coal at a terminal berth under a charter party that specifies the bill-of-lading quantity is the draft-survey figure unless the variance from the shore tally exceeds 0.5%.

Initial (pre-loading) draft survey, mean-of-means drafts read at 4.10 m, displacement from the vessel's hydrostatic tables: 18,420.0 MT. Deductibles at initial survey (ship's constant, fuel oil, fresh water, ballast aboard): 1,850.0 MT. Net initial displacement = 18,420.0 − 1,850.0 = 16,570.0 MT.

Final (post-loading) draft survey, mean-of-means drafts read at 9.85 m, displacement from tables: 41,650.0 MT. During loading the vessel consumed 160.0 MT of bunkers (ballast unchanged), so deductibles at final survey: 1,850.0 − 160.0 = 1,690.0 MT. Net final displacement = 41,650.0 − 1,690.0 = 39,960.0 MT.

Cargo loaded (draft-survey figure) = 39,960.0 − 16,570.0 = 23,390.0 MT.

Shore tally (belt-scale weighed total for the same loading): 23,320.0 MT.

Variance = 23,390.0 − 23,320.0 = 70.0 MT → 70.0 / 23,320.0 = 0.30%, inside the 0.5% charter-party tolerance.

Separately, on final inspection of the last hold closed, the inspector finds a section of the tarpaulin dunnage used to keep the previous cargo (fertilizer) residue off this parcel was not fully removed before loading — a patch roughly 2 m × 1.5 m of coal in way of hold 4 shows visible white residue contamination.

Naive read a generalist might produce: "The draft survey and shore tally basically match, so sign the certificate for the shore figure since it's a round number, and mention the residue verbally to the chief mate so it's on record."

Expert reasoning: The 0.30% variance is genuinely within tolerance, so the draft-survey figure — not the shore tally — governs per the charter party's own terms; a generalist defaulting to the "round" shore number would be signing the wrong contractual quantity even though both figures are close. The residue finding is a separate, independent determination from the quantity reconciliation: it does not change how much cargo loaded, but it is a condition exception that must be documented and noted at the moment of discovery — photographed, located precisely (hold 4, that specific patch), and entered on the mate's receipt — because once the hold is battened down and the vessel sails, there is no way to later prove the contamination was present at loading rather than picked up in transit or at discharge. A verbal mention to the chief mate creates no evidentiary record; only a written exception does.

Deliverable — Draft Survey Certificate and Statement of Facts excerpt:

Vessel: MV Example — Cargo: Steam coal, bulk — Berth: Terminal 4 Draft Survey — Cargo Loaded: 23,390.0 MT (initial net displacement 16,570.0 MT; final net displacement 39,960.0 MT; bunkers consumed during loading 160.0 MT). Shore Tally: 23,320.0 MT. Variance: 70.0 MT (0.30%), within the 0.5% charter-party tolerance — draft-survey figure of 23,390.0 MT governs as the Bill of Lading quantity per Clause 12. Condition Exception — Hold 4: Approx. 2 m × 1.5 m patch of visible residue contamination (consistent with prior fertilizer cargo) noted on final hold inspection prior to closing, 14:20 local. Photographs on file (Ref. IMG-0417 to 0421). Exception noted on Mate's Receipt at time of discovery; letter of protest issued to terminal regarding hold-cleaning certificate presented as "clean and dry, fit to load" at 09:00 same date. Surveyor's finding: Quantity reconciled and accepted. Condition exception reserved — liability for any resulting quality claim not determined by this survey.

Going deeper

• references/playbook.md — load when working a draft survey, an API MPMS tank-gauging outturn, a clearance/stability calculation, or a securement working-load-limit calculation.
• references/red-flags.md — load when a reading, tally, or document looks off and you need to know what it usually means.
• references/vocabulary.md — load when a term in a survey report or certificate needs a precise definition.

Sources

API Manual of Petroleum Measurement Standards (MPMS), Chapter 3 (Tank Gauging) and related volume-correction-factor tables for converting observed tank volumes to a 60°F standard; UK P&I Club, Carefully to Carry (2023 ed.), Chapter 16, "Draught Surveys," for mean-of-means draft procedure, trim/density corrections, and the accepted accuracy tolerance for a properly conducted survey; IMO International Maritime Dangerous Goods (IMDG) Code segregation tables and the IMO Cargo Securing Manual (CSS Code) requirements for lashing and stowage; 49 CFR Part 393, Subpart I (Protection Against Shifting and Falling Cargo), §393.106, for the aggregate working-load-limit rule (combined tiedown WLL at least half the secured article's weight) referenced as the cross-mode securement heuristic; National Association of Marine Surveyors (NAMS) and Society of Accredited Marine Surveyors (SAMS) certification standards for the cargo-survey specialization and professional practice norms. Figures in the worked example (drafts, displacements, deductibles, residue dimensions) are constructed for reconciling arithmetic and are not a specific historical survey — apply the vessel's own hydrostatic tables and the current-edition standards before certifying an actual cargo figure.