chat-perf

name	chat-perf
description	Run chat perf benchmarks and memory leak checks against the local dev build or any published VS Code version. Use when investigating chat rendering regressions, validating perf-sensitive changes to chat UI, or checking for memory leaks in the chat response pipeline.

Chat Performance Testing

When to use

• Before/after modifying chat rendering code (chatListRenderer.ts, chatInputPart.ts, markdown rendering)
• When changing the streaming response pipeline or SSE processing
• When modifying disposable/lifecycle patterns in chat components
• To compare performance between two VS Code releases
• In CI to gate PRs that touch chat UI code

Quick start

# Run perf regression test (compares local dev build vs VS Code 1.115.0):
npm run perf:chat -- --scenario text-only --runs 3

# Run all scenarios with no baseline (just measure):
npm run perf:chat -- --no-baseline --runs 3

# Compare two local builds (apples-to-apples):
npm run perf:chat -- --build /path/to/build-A --baseline-build /path/to/build-B --runs 5

# Build a local production package and compare against a release:
npm run perf:chat -- --production-build --baseline-build 1.115.0 --runs 5

# Run memory leak check (10 messages in one session):
npm run perf:chat-leak

# Run leak check with more messages for accuracy:
npm run perf:chat-leak -- --messages 20 --verbose

Perf regression test

Script: scripts/chat-simulation/test-chat-perf-regression.js npm: npm run perf:chat

Launches VS Code via Playwright Electron, opens the chat panel, sends a message with a mock LLM response, and measures timing, layout, and rendering metrics. By default, downloads VS Code 1.115.0 as a baseline, benchmarks it, then benchmarks the local dev build and compares.

Key flags

Flag	Default	Description
--runs <n>	5	Runs per scenario. More = more stable. Use 5+ for CI.
--scenario <id> / -s	all	Scenario to test (repeatable). See common/perf-scenarios.js.
--build <path|ver> / -b	local dev	Build to test. Accepts path or version (1.110.0, insiders, commit hash).
--baseline <path>	—	Compare against a previously saved baseline JSON file.
--baseline-build <path|ver>	1.115.0	Version or local path to benchmark as baseline.
--no-baseline	—	Skip baseline comparison entirely.
--save-baseline	—	Save results as the new baseline (requires --baseline <path>).
--resume <path>	—	Resume a previous run, adding more iterations to increase confidence.
--threshold <frac>	0.2	Regression threshold (0.2 = flag if 20% slower).
--production-build	—	Build a local bundled package via gulp vscode for comparison against a release baseline.
--no-cache	—	Ignore cached baseline data, always run fresh.
--force	—	Skip build mode mismatch confirmation prompt.
--ci	—	CI mode: write Markdown summary to ci-summary.md (implies --no-cache, --heap-snapshots, --cleanup-diagnostics).
--heap-snapshots	—	Take heap snapshots after each run (slow; auto-enabled in --ci mode).
--cleanup-diagnostics	—	Delete heap snapshots, CPU profiles, and traces to save disk. During runs, only the latest run's files are kept; after comparison, files for non-regressed scenarios are deleted. Auto-enabled in --ci mode.
--setting <k=v>	—	Set a VS Code setting override for all builds (repeatable).
--test-setting <k=v>	—	Set a VS Code setting override for the test build only.
--baseline-setting <k=v>	—	Set a VS Code setting override for the baseline build only.
--verbose	—	Print per-run details including response content.

Comparing two remote builds

# Compare 1.110.0 against 1.115.0 (no local build needed):
npm run perf:chat -- --build 1.110.0 --baseline-build 1.115.0 --runs 5

Comparing two local builds

Both --build and --baseline-build accept local paths to VS Code executables. This enables apples-to-apples comparisons between any two builds:

# Compare two dev builds (e.g. feature branch vs main):
npm run perf:chat -- \
  --build .build/electron/Code\ -\ OSS.app/Contents/MacOS/Code\ -\ OSS \
  --baseline-build /path/to/other/Code\ -\ OSS.app/Contents/MacOS/Code\ -\ OSS \
  --runs 5

# Compare two production builds:
npm run perf:chat -- \
  --build ../VSCode-darwin-arm64-feature/Code\ -\ OSS.app/Contents/MacOS/Code\ -\ OSS \
  --baseline-build ../VSCode-darwin-arm64-main/Code\ -\ OSS.app/Contents/MacOS/Code\ -\ OSS \
  --runs 5

Local path baselines are never cached (the build may change between runs). Version string baselines are cached for reuse.

Build modes and mismatch detection

The tool classifies builds into three modes based on the executable path:

Mode	Source	Characteristics
dev	.build/electron/ (local dev)	Unbundled sources, VSCODE_DEV=1, NODE_ENV=development. Higher memory and startup overhead.
production	../VSCode-<platform>-<arch>/ (from gulp vscode)	Bundled JS, no dev flags. Matches release characteristics but uses local source.
release	.vscode-test/ (downloaded via @vscode/test-electron)	Official published build.

When test and baseline builds have different modes (e.g. dev vs release), the tool shows a warning and prompts for confirmation. Use --force or --ci to skip the prompt.

Using --production-build builds a local bundled package via gulp vscode for fair comparison against a release baseline. This eliminates dev-mode overhead while still testing your local changes.

# Production build vs release baseline (fair comparison):
npm run perf:chat -- --production-build --baseline-build 1.115.0 --runs 5

Settings overrides

Use --setting, --test-setting, and --baseline-setting to inject VS Code settings into the launched instance. This is useful for A/B testing experimental features:

# Enable a feature for the test build only:
npm run perf:chat -- --test-setting chat.experimental.incrementalRendering.enabled=true --runs 3

# Compare two builds with different settings:
npm run perf:chat -- \
  --baseline-build "../vscode2/.build/electron/OmniCode.app/Contents/MacOS/OmniCode" \
  --baseline-setting chat.experimental.incrementalRendering.enabled=true \
  --test-setting chat.experimental.incrementalRendering.enabled=false \
  --runs 3

# Set a value for both builds:
npm run perf:chat -- --setting chat.mcp.enabled=false --runs 3

Precedence: --test-setting / --baseline-setting override --setting for the same key. Values are auto-parsed: true/false become booleans, numbers become numbers, everything else stays a string.

Resuming a run for more confidence

When results exceed the threshold but aren't statistically significant, the tool prints a --resume hint. Use it to add more iterations to an existing run:

# Initial run with 3 iterations — may be inconclusive:
npm run perf:chat -- --scenario text-only --runs 3

# Add 3 more runs to the same results file (both test + baseline):
npm run perf:chat -- --resume .chat-simulation-data/2026-04-14T02-15-14/results.json --runs 3

# Keep adding until confidence is reached:
npm run perf:chat -- --resume .chat-simulation-data/2026-04-14T02-15-14/results.json --runs 5

--resume loads the previous results.json and its associated baseline-*.json, runs N more iterations for both builds, merges rawRuns, recomputes stats, and re-runs the comparison. The updated files are written back in-place. You can resume multiple times — samples accumulate.

Statistical significance

Regression detection uses Welch's t-test to avoid false positives from noisy measurements. A metric is only flagged as REGRESSION when it both exceeds the threshold AND is statistically significant (p < 0.05). Otherwise it's reported as (likely noise — p=X, not significant).

With typical variance (cv ≈ 20%), you need:

• n ≥ 5 per build to detect a 35% regression at 95% confidence
• n ≥ 10 per build to detect a 20% regression reliably

Confidence levels reported: high (p < 0.01), medium (p < 0.05), low (p < 0.1), none.

Exit codes

• 0 — all metrics within threshold, or exceeding threshold but not statistically significant
• 1 — statistically significant regression detected, or all runs failed

Scenarios

Scenarios are defined in scripts/chat-simulation/common/perf-scenarios.js and registered via registerPerfScenarios(). There are three categories:

• Content-only — plain streaming responses (e.g. text-only, large-codeblock, rapid-stream)
• Tool-call — multi-turn scenarios with tool invocations (e.g. tool-read-file, tool-edit-file)
• Multi-turn user — multi-turn conversations with user follow-ups, thinking blocks (e.g. thinking-response, multi-turn-user, long-conversation)

Run npm run perf:chat -- --help to see the full list of registered scenario IDs.

Metrics collected

• Timing: time to first token, time to complete, time to render complete (includes typewriter animation)
• Rendering: layout count, layout duration (ms), style recalculation count, forced reflows, long tasks (>50ms), long animation frame count and duration
• Memory: heap before/after, heap delta post-GC (informational, noisy for single requests)
• Extension host: heap before/after/delta via CDP inspector

Regression triggers vs informational metrics

Only these metrics trigger a regression failure (when they exceed the threshold with statistical significance):

• timeToFirstToken, timeToComplete — user-perceived latency
• forcedReflowCount — forced synchronous layouts are always bad
• longTaskCount, longAnimationFrameCount — main thread jank

These are reported but informational only (won't fail CI):

• layoutCount — inflated by CSS animations; use layoutDurationMs instead
• layoutDurationMs — total layout time from trace (more meaningful than count)
• recalcStyleCount — inflated by CSS animations (compositor-driven, cheap)
• timeToRenderComplete — includes typewriter animation tail
• Memory/heap metrics — too noisy for single-request benchmarks

Statistics

Results use IQR-based outlier removal and median (not mean) to handle startup jitter. The coefficient of variation (cv) is reported — under 15% is stable, over 15% gets a ⚠ warning. Baseline comparison uses Welch's t-test on raw run values to determine statistical significance before flagging regressions. Use 5+ runs to get stable results.

Memory leak check

Script: scripts/chat-simulation/test-chat-mem-leaks.js npm: npm run perf:chat-leak

Launches one VS Code session, sends N messages sequentially, forces GC between each, and measures renderer heap and DOM node count. Uses linear regression on the samples to compute per-message growth rate, which is compared against a threshold.

Key flags

Flag	Default	Description
--messages <n> / -n	10	Number of messages to send. More = more accurate slope.
--build <path|ver> / -b	local dev	Build to test.
--threshold <MB>	2	Max per-message heap growth in MB.
--setting <k=v>	—	Set a VS Code setting override (repeatable).
--verbose	—	Print per-message heap/DOM counts.

What it measures

• Heap growth slope (MB/message) — linear regression over forced-GC heap samples. A leak shows as sustained positive slope.
• DOM node growth (nodes/message) — catches rendering leaks where elements aren't cleaned up. Healthy chat virtualizes old messages so node count plateaus.

Interpreting results

• 0.3–1.0 MB/msg — normal (V8 internal overhead, string interning)
• >2.0 MB/msg — likely leak, investigate retained objects
• DOM nodes stable after first message — normal (chat list virtualization working)
• DOM nodes growing linearly — rendering leak, check disposable cleanup

Architecture

scripts/chat-simulation/
├── common/
│   ├── mock-llm-server.js    # Mock CAPI server matching @vscode/copilot-api URL structure
│   ├── perf-scenarios.js     # Built-in scenario definitions (content, tool-call, multi-turn)
│   └── utils.js              # Shared: paths, env setup, stats, launch helpers
├── config.jsonc              # Default config (baseline version, runs, thresholds)
├── fixtures/                 # TypeScript fixture files used by tool-call scenarios
├── test-chat-perf-regression.js
└── test-chat-mem-leaks.js

Mock server

The mock LLM server (common/mock-llm-server.js) implements the full CAPI URL structure from @vscode/copilot-api's DomainService:

• GET /models — returns model metadata
• POST /models/session — returns AutoModeAPIResponse with available_models and session_token
• POST /models/session/intent — model router
• POST /chat/completions — SSE streaming response matching the scenario
• Agent, session, telemetry, and token endpoints

The copilot extension connects to this server via IS_SCENARIO_AUTOMATION=1 mode with overrideCapiUrl and overrideProxyUrl settings. The vscode-api-tests extension must be disabled (--disable-extension=vscode.vscode-api-tests) because it contributes a duplicate copilot vendor that blocks the real extension's language model provider registration.

Adding a scenario

1. Add a new entry to the appropriate object (CONTENT_SCENARIOS, TOOL_CALL_SCENARIOS, or MULTI_TURN_SCENARIOS) in common/perf-scenarios.js using the ScenarioBuilder API from common/mock-llm-server.js
2. The scenario is auto-registered by registerPerfScenarios() — no manual ID list to update
3. Run: npm run perf:chat -- --scenario your-new-scenario --runs 1 --no-baseline --verbose

Related skills

• heap-snapshot-analysis — When a perf regression or leak check identifies high memory growth, use the heap-snapshot-analysis skill to dig deeper. It can parse .heapsnapshot files, compare before/after snapshots, group object deltas, and trace retainer paths to find what keeps disposed objects alive. The chat-perf leak check measures overall heap slope; heap-snapshot-analysis finds the specific objects responsible.
• auto-perf-optimize — For launching VS Code, driving a scenario, and capturing heap snapshots or CPU profiles automatically before doing low-level analysis.