wifi-skill

name	wifi-skill
description	Control Android WiFi - enable, disable, get status, scan for networks, and get current connection info.
allowed-tools	wifi_automation
metadata	{"author":"machina","version":"1.0","category":"android"}

WiFi Automation Tool

Control WiFi on Android devices.

How It Works

This skill provides instructions for the WiFi Automation tool node. Connect the WiFi Automation node to Zeenie's input-tools handle to enable WiFi control.

wifi_automation Tool

Control WiFi settings and get network information.

Schema Fields

Field	Type	Required	Description
action	string	Yes	Action to perform (see below)
parameters	object	No	Additional parameters for certain actions

Actions

Action	Description	Parameters
status	Get WiFi status and connection info	None
enable	Turn WiFi on	None
disable	Turn WiFi off	None
scan	Scan for available networks	None

Examples

Get WiFi status:

{
  "action": "status"
}

Enable WiFi:

{
  "action": "enable"
}

Disable WiFi:

{
  "action": "disable"
}

Scan for networks:

{
  "action": "scan"
}

Response Formats

Status response:

{
  "success": true,
  "service": "wifi_automation",
  "action": "status",
  "data": {
    "enabled": true,
    "connected": true,
    "ssid": "MyHomeNetwork",
    "bssid": "aa:bb:cc:dd:ee:ff",
    "ip_address": "192.168.1.100",
    "link_speed": 72,
    "rssi": -45,
    "frequency": 2437
  }
}

Scan response:

{
  "success": true,
  "service": "wifi_automation",
  "action": "scan",
  "data": {
    "networks": [
      {
        "ssid": "MyHomeNetwork",
        "bssid": "aa:bb:cc:dd:ee:ff",
        "rssi": -45,
        "frequency": 2437,
        "security": "WPA2"
      },
      {
        "ssid": "Neighbor_WiFi",
        "bssid": "11:22:33:44:55:66",
        "rssi": -70,
        "frequency": 5180,
        "security": "WPA3"
      }
    ]
  }
}

Enable/Disable response:

{
  "success": true,
  "service": "wifi_automation",
  "action": "enable",
  "data": {
    "message": "WiFi enabled successfully"
  }
}

Response Fields

Field	Description
enabled	WiFi radio is on
connected	Connected to a network
ssid	Network name
bssid	Access point MAC address
ip_address	Device IP on network
link_speed	Connection speed in Mbps
rssi	Signal strength (dBm, closer to 0 is stronger)
frequency	Channel frequency in MHz

Use Cases

Use Case	Action	Description
Check connection	status	Verify WiFi is connected
Toggle WiFi	enable/disable	Control WiFi radio
Find networks	scan	List available networks
Signal strength	status	Check connection quality

Common Workflows

Auto-connect workflow

1. Check WiFi status
2. If not enabled, enable it
3. Scan for networks
4. Report available options

Battery saving

1. Check if on mobile data
2. If not using WiFi, disable it
3. Re-enable when needed

Signal Strength Guide

RSSI (dBm)	Quality
> -50	Excellent
-50 to -60	Good
-60 to -70	Fair
-70 to -80	Weak
< -80	Poor

Setup Requirements

1. Connect the WiFi Automation node to Zeenie's input-tools handle
2. Android device must be paired
3. Location permission may be required for scanning