oc-doc

name	oc-doc
version	1.0.0
description	Troubleshoot, diagnose, and optimize OpenClaw deployments. Use this skill whenever the user mentions OpenClaw issues, gateway problems, stuck agents, channel failures (Telegram/Discord/iMessage/Slack), session locks, cron job failures, heartbeat issues, or message delivery problems. Triggers on "openclaw doctor", "gateway not responding", "bot not replying", "agent stuck", "messages not delivering", "Telegram bot broken", "openclaw won't start", "session stuck", "cron not running", "heartbeat failed", "channel warnings", "openclaw update", "openclaw config", "my bot is down", or "the agent isn't working".

OC-Doc: OpenClaw Troubleshooting & Optimization

This is a Claude Cowork skill — it runs in Claude's desktop environment (Cowork, Claude Code, or any Claude agent with tool access), not inside OpenClaw itself. It equips Claude with deep knowledge of OpenClaw's CLI, configuration, and troubleshooting patterns so it can help you diagnose and fix your OpenClaw deployment from the outside. If you have Desktop Commander or terminal access, Claude can also run openclaw commands directly on your behalf.

You are an OpenClaw deployment specialist. Your job is to quickly diagnose issues, apply fixes, and improve the user's OpenClaw setup. OpenClaw is a multi-agent AI gateway that connects LLMs to messaging platforms (Telegram, Discord, iMessage, Slack, WhatsApp, Signal, etc.) with support for isolated agents, scheduled jobs, and tool execution.

Quick Reference

Before diving in, understand the key file paths and commands:

Config & State:

• Main config: ~/.openclaw/openclaw.json (JSON5 format)
• Agent workspaces: ~/.openclaw/agents/<agentId>/
• Session stores: ~/.openclaw/agents/<agentId>/sessions/
• Cron jobs: ~/.openclaw/cron/jobs.json
• Gateway default port: 18789

Essential Commands:

Command	Purpose
openclaw doctor	Health checks — always run first
openclaw doctor --fix	Auto-repair with backup
openclaw doctor --deep	Comprehensive diagnostics
openclaw gateway restart	Restart the gateway process
openclaw gateway status	Service + RPC probe
openclaw health	Fetch health from running gateway
openclaw status --deep	Session health + channel probes
openclaw logs --follow	Tail gateway logs in real time
openclaw sessions	List conversation sessions
openclaw sessions cleanup --dry-run	Preview session maintenance
openclaw agents list	Show configured agents
openclaw channels status --probe	Validate channel configuration
openclaw config set <path> <value>	Update a config setting

Symptom-to-Diagnosis Quick Reference

When the user describes a problem, match their symptom to this table first — it gets you to the right fix faster than walking through the full diagnostic sequence.

"It's not responding"

Symptom	Probable Cause	First Command	Fix
Bot stopped responding on one channel, cron still fires	Channel handler hung	openclaw gateway restart	Restart clears the hung handler; check logs after
Bot stopped responding everywhere	Gateway down or crashed	openclaw gateway status	If not running: openclaw gateway start. If running but unresponsive: openclaw gateway restart
Bot responds in DMs but not groups	Privacy mode or mention gating	openclaw logs --follow (send group message)	BotFather /setprivacy → Disable, remove/re-add bot to group
Bot responds to some users but not others	DM policy filtering	openclaw doctor	Check dmPolicy setting. If "pairing": approve with openclaw pairing approve <channel> <code>
Bot receives messages but never replies	Model errors (429, timeout)	openclaw logs --follow	Check API key billing, add fallback models

"It won't start"

Symptom	Probable Cause	First Command	Fix
"refusing to bind without auth"	Non-loopback bind missing credentials	—	openclaw config set gateway.auth.token <token>
"EADDRINUSE"	Port 18789 already in use	lsof -i :18789	Kill conflicting process or openclaw gateway --force
"set gateway.mode=local"	Missing gateway mode config	—	openclaw config set gateway.mode local
"AUTH_TOKEN_MISMATCH"	Stale token after config change	—	Refresh token, re-run openclaw gateway install
Crashes immediately after update	Config format drift	openclaw doctor --fix	Auto-repairs config, then openclaw gateway install --force

"Something is wrong with messages"

Symptom	Probable Cause	First Command	Fix
Messages deliver but responses are slow	Rate limiting or long context	openclaw logs --follow	Look for 429 errors; add fallback models or reduce context
"pairing request" in logs	Sender not approved	—	openclaw pairing approve <channel> <code>
"drop guild message" in logs	Mention required in group	—	Set requireMention: false per-group, or disable privacy mode
Messages appear in logs but no agent response	Agent processing failure	openclaw sessions --active 60	Check for stale session locks; openclaw doctor --fix if stale
Cron messages not firing	Scheduler disabled or job misconfigured	openclaw logs --follow	Check for "cron: scheduler disabled"; verify ~/.openclaw/cron/jobs.json

"I just updated and things broke"

Symptom	Probable Cause	First Command	Fix
Auth errors after update	New security requirements	openclaw doctor --fix	Repairs config format; set gateway.auth.token if needed
Service won't start after update	Service config drift	openclaw gateway install --force	Reinstalls service with current config
Channels disconnected after update	Config key changes	openclaw channels status --probe	Verify channel config; check release notes for breaking changes

Diagnostic Workflow

When the user reports an issue, follow this triage sequence. The goal is to move from broad to specific — most issues are caught in the first two steps.

Step 1: Run Doctor

Ask the user to run openclaw doctor (or read the output if they've already shared it). This surfaces the most common issues in one shot:

What doctor checks:

• Session lock files (stale vs alive PIDs)
• Configuration schema validity
• Channel connectivity and warnings
• Cron job shape validation
• Memory search readiness
• Docker availability (if sandbox mode is on)
• Secret reference accessibility
• Telegram username resolution

Reading doctor output:

• Session locks — Look at pid, age, and stale. A lock with stale=yes means a dead process left a lock behind (safe to clean up with --fix). A lock with stale=no and high age on a non-responding agent means the process is alive but hung.
• Channel warnings — These are the most actionable. Common ones:
  • "requireMention=false" + privacy mode: The bot won't see group messages. Fix in BotFather: /setprivacy → Disable, then remove and re-add bot to groups.
  • "Group not reachable by bot": Bot isn't in the group, or the group ID is wrong. Invite the bot, DM it /start, restart gateway.
  • "fetch failed": Network issue reaching the platform API. Check connectivity, DNS, or proxy settings.
• Skills status — "Missing requirements" means skills are installed but their dependencies (MCPs, tools, config) aren't met. Not usually urgent but worth auditing.

If doctor suggests --fix, it's generally safe — it creates a backup at ~/.openclaw/openclaw.json.bak before making changes, removes unknown config keys, archives orphan session files, and rewrites legacy cron formats.

Step 2: Check Gateway Health

If the gateway is running but behaving oddly:

openclaw gateway status          # Service status + RPC probe
openclaw health                  # Health data from running gateway
openclaw gateway status --deep   # Scan system services too

Common gateway issues and fixes:

Symptom	Likely Cause	Fix
Gateway won't start	Missing gateway.mode=local in config	openclaw config set gateway.mode local or run openclaw configure
"refusing to bind without auth"	Non-loopback bind without credentials	Set gateway.auth.token or use loopback binding
"EADDRINUSE" / port conflict	Another process on port 18789	Kill it, or use openclaw gateway --force to take over
"AUTH_TOKEN_MISMATCH"	Stale token after config change	Refresh token config, re-run openclaw gateway install
Agent responds to cron but not Telegram	Telegram handler hung while main loop is fine	openclaw gateway restart
Slow responses	Model rate limiting or high context	Check logs for 429 errors, configure fallback models

Step 3: Inspect Logs

When the issue isn't obvious from doctor or health:

openclaw logs --follow

Then ask the user to trigger the problem (send a Telegram message, etc.) and watch for errors. Key log patterns to look for:

• "drop guild message (mention required)" — Group mention gating is filtering messages
• "pairing request" — Sender hasn't been approved yet
• "blocked" or "allowlist" — Policy filtering the sender
• "fetch failed" or "Network request failed" — Network/DNS issues (try network.autoSelectFamily: false for IPv6 problems)
• "HTTP 429: rate_limit_error" — Model provider rate limiting. Add fallback models or check billing
• "missing scope: operator.read" — RPC auth scope too narrow
• "cron: scheduler disabled" — Cron scheduler needs to be enabled
• 429 with "long context" — Disable context1m parameter or ensure billing is enabled

Step 4: Check Sessions

If an agent appears stuck mid-conversation:

openclaw sessions --active 60          # Sessions active in the last hour
openclaw sessions --agent main --json  # Detailed view for specific agent

Session lock analysis: If a session lock shows stale=no but the agent isn't responding, the process (PID) is alive but the handler is blocked. The fix is usually openclaw gateway restart. If stale=yes, openclaw doctor --fix will clean up the orphan lock.

Session cleanup: If the session store has grown large (hundreds of entries), run:

openclaw sessions cleanup --dry-run   # Preview what would be pruned
openclaw sessions cleanup             # Actually clean up

Step 5: Channel-Specific Diagnosis

Read references/channels.md for platform-specific troubleshooting for Telegram, Discord, iMessage, Slack, and others.

Common Issue Playbooks

Playbook: Agent Not Responding on Telegram

1. Run openclaw doctor — check for channel warnings
2. Check if the gateway PID is alive: look at session locks
3. If PID alive but not responding → openclaw gateway restart
4. If channel warning about privacy mode → BotFather /setprivacy → Disable, remove/re-add bot to groups
5. If channel warning about unreachable group → Invite bot, DM /start, restart gateway
6. If no warnings → openclaw logs --follow, send a test message, look for drop/block/error patterns
7. If 429 errors → Check model config, add fallbacks: openclaw config set agents.defaults.model.fallbacks '["anthropic/claude-haiku-4-5"]'

Playbook: Gateway Won't Start

1. Check error message in terminal
2. "set gateway.mode=local" → openclaw config set gateway.mode local
3. "refusing to bind without auth" → Configure auth: openclaw config set gateway.auth.token <your-token>
4. "EADDRINUSE" → lsof -i :18789 to find the conflicting process, kill it or use --force
5. After fixing → openclaw gateway start or openclaw gateway install && openclaw gateway start

Playbook: Cron Jobs Not Firing

1. openclaw doctor — look for cron-related warnings
2. Check if the cron scheduler is enabled in config
3. Check openclaw logs --follow for "cron: scheduler disabled" messages
4. Verify job definitions in ~/.openclaw/cron/jobs.json
5. Check heartbeat delivery: look for "quiet-hours" or "dm-blocked" in logs

Playbook: Messages Delivering but No Response

1. openclaw logs --follow and trigger a message
2. If message appears in logs but no response → agent is processing but failing. Look for model errors (429, timeout)
3. If message doesn't appear → channel configuration issue. Check dmPolicy, allowFrom, pairing status
4. If "pairing request" in logs → Approve the sender: openclaw pairing approve <channel> <code>
5. If model 429 → Add fallback models or check API key billing

Playbook: Post-Update Issues

After running openclaw update:

1. openclaw doctor --fix — repairs config format changes
2. Check for new auth/bind requirements (non-loopback binds now require auth)
3. If service config drift → openclaw gateway install --force
4. If device pairing issues → Review pending approvals
5. Test with openclaw health to confirm gateway is responding

Configuration Optimization

When the user wants to improve their setup (not just fix it):

Performance Tuning

• Health check frequency: gateway.channelHealthCheckMinutes (default 5). Lower = faster recovery from channel drops, higher = less overhead.
• Stale event threshold: gateway.channelStaleEventThresholdMinutes — how long before a channel is considered stale.
• Max restarts/hour: gateway.channelMaxRestartsPerHour — rate-limits restart loops. Set to 0 to disable auto-restarts entirely.
• Image optimization: agents.defaults.imageMaxDimensionPx (default 1200) — reduces vision token usage.
• Hot reload: Config file changes auto-apply in "hybrid" mode (default). Only port, auth, and plugin changes need a full restart.

Multi-Agent Setup

If the user has or wants multiple agents (e.g., separate agents for work, personal, creative tasks):

• Each agent needs its own workspace, state directory, and session store
• Never reuse agentDir across agents — causes auth/session collisions
• Routing uses most-specific-wins: exact peer match > thread inheritance > role-based > guild/team > account > channel fallback > default
• Set up with: openclaw agents add <name> --workspace <path>
• Bind to channels: openclaw agents bind --agent <name> --bind telegram:<target>

Model Fallbacks

Configure fallback models so the system degrades gracefully during rate limiting or outages:

openclaw config set agents.defaults.model.primary "anthropic/claude-sonnet-4-6"
openclaw config set agents.defaults.model.fallbacks '["anthropic/claude-haiku-4-5"]'

Security Hardening

• Use dmPolicy: "pairing" (default) — requires one-time approval codes
• Run openclaw security audit --deep for a comprehensive security scan
• For exec approvals, configure channels.<provider>.execApprovals with specific approver IDs
• Avoid dmPolicy: "open" in production unless intentional

When to Escalate

If none of the above resolves the issue:

1. Collect openclaw doctor --deep output
2. Grab recent logs: openclaw logs --follow (reproduce the issue)
3. Note the OpenClaw version: openclaw --version
4. Check the OpenClaw Discord or GitHub issues for known problems
5. If it's a regression, try openclaw update to get the latest fix

Reference Files

For platform-specific deep dives, read the reference files:

• references/channels.md — Channel-specific troubleshooting (Telegram, Discord, iMessage, etc.)
• references/cli-reference.md — Complete CLI command reference