تشغيل أي مهارة في Manus بنقرة واحدة

cad-modeling

Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.

تشغيل في Manus

نظرة عامة

Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.

أمر التثبيت

npx skills add https://github.com/00000star/AGI_engineering_forge --skill cad-modeling

انسخ والصق هذا الأمر في Claude Code لتثبيت المهارة

المصدر

00000star/AGI_engineering_forge

النجوم٠

التفرعات٠

آخر تحديث٢٦ مارس ٢٠٢٦ في ١٩:٣٢

SKILL.md

readonly

name	cad-modeling
description	Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.
metadata	{"openclaw":{"emoji":"📐","requires":{"anyBins":["python3"]}}}

CAD Modeling with OpenSCAD

Generate parametric 3D geometry from code. Produces .scad files (and .stl if OpenSCAD binary is installed).

Usage

python3 /workspace/bridge.py openscad '
// Parametric bracket
thickness = 5;
width = 30;
height = 40;
hole_d = 6;

difference() {
    cube([width, thickness, height]);
    translate([width/2, -1, height - 15])
        rotate([-90, 0, 0])
            cylinder(h=thickness+2, d=hole_d, $fn=32);
}
'

Best Practices

Always parameterize dimensions (no magic numbers)
Use $fn=32 or higher for smooth curves
Comment design intent
Export to STEP/STL when manufacturing
Use module for reusable components

المزيد من هذا المستودع

نفس المستودع

circuit-design

00000star/AGI_engineering_forge

Analytical circuit design and simulation — voltage dividers, RC/RL/RLC filters, power calculations, impedance analysis, transfer functions. Uses sympy for symbolic analysis and numpy for numerical.

2026-03-260

flight-controls

00000star/AGI_engineering_forge

Design and simulate control systems — transfer functions, PID controllers, Bode plots, root locus, stability analysis, state-space modeling. Uses scipy.signal and sympy.

2026-03-260

forge-engineering

00000star/AGI_engineering_forge

Run a complete engineering project through Forge's 8-phase autonomous pipeline. Decomposes any idea into subsystems, assigns specialist agents, produces real artifacts (CAD, firmware, schematics, BOMs), and iterates until the design works.

2026-03-260

structural-analysis

00000star/AGI_engineering_forge

Perform real structural engineering calculations — beam deflection, stress analysis, buckling, safety factors. Uses numpy and scipy with built-in helper functions.

2026-03-260

tool-fabricator

00000star/AGI_engineering_forge

When no existing engineering tool fits the problem, the fabricator creates a new one from scratch. Designs, writes, tests, and registers new computational tools at runtime. This is the AGI capability.

2026-03-260

المصدر

00000star

00000star/AGI_engineering_forge

فتح مستودع GitHub عرض مستودعات المنشئ

أمر التثبيت

تنزيل

تشغيل في Manus

مفيد لـSOC

مطوّرو البرمجياتمهن الحاسوب والرياضيات15-1252L4

name	cad-modeling
description	Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.
metadata	{"openclaw":{"emoji":"📐","requires":{"anyBins":["python3"]}}}

CAD Modeling with OpenSCAD

Generate parametric 3D geometry from code. Produces .scad files (and .stl if OpenSCAD binary is installed).

Usage

python3 /workspace/bridge.py openscad '
// Parametric bracket
thickness = 5;
width = 30;
height = 40;
hole_d = 6;

difference() {
    cube([width, thickness, height]);
    translate([width/2, -1, height - 15])
        rotate([-90, 0, 0])
            cylinder(h=thickness+2, d=hole_d, $fn=32);
}
'

Best Practices

Always parameterize dimensions (no magic numbers)
Use $fn=32 or higher for smooth curves
Comment design intent
Export to STEP/STL when manufacturing
Use module for reusable components