| name | adev:reconcile |
| description | Interactive repair for lifecycle mismatches. Detects orphaned artifacts, stale epics, untraced code, and missing issues, then offers targeted fixes. Use when hygiene or status reveals inconsistencies, or when the user says 'reconcile', 'fix mismatches', 'clean up lifecycle', 'retroactive stamping', 'close stale epics'. In Codex, invoke with $adev:reconcile |
Lifecycle Reconciliation
Interactive repair for mismatches between specs, plans, the issue board, and code provenance. Reads detection results from /adev:hygiene and /adev:status, then offers targeted fixes for each finding.
Announce at start: "I'm using the adev:reconcile skill to detect and repair lifecycle mismatches."
Arguments
- No arguments: full reconciliation scan (all checks)
--check <type>: run a single check (epics, plans, issues, manifests, untraced, lifecycle-sync)--batch: apply fixes without confirmation prompts (use with caution)--dry-run: show what would be fixed without making changes--fix: apply all detected fixes automatically without per-item confirmation (this is the default behavior post-check-set-restructure.spec.md)--no-fix: report-only mode โ show findings without applying any fixes (opposite of the new default; preserves the historical "scan first, then ask" workflow for users who want it)
Prerequisites
.context-index/ must exist with manifest.yaml.tasks.backend must be configured for issue board operations.- If a recent hygiene report exists at
.context-index/hygiene/drift-report.md, read it for pre-computed findings. Otherwise, run detection inline.
Process
Default mode: --fix (applies fixes automatically). Pass --no-fix for a report-only run. This default was flipped as part of check-set-restructure.spec.md so that /adev:reconcile is the authoritative repair tool for lifecycle drift (the previous validate-time Check 12 only warned; it never fixed). User-facing prompts still appear interactively unless --batch or --no-fix is passed.
Load Skill Extensions: Load any skill extension instructions before proceeding:
adev skill-ext load --skill reconcile
If the output is not __NONE__, incorporate it as additional standing instructions that apply to this skill's entire execution. Frame it as: "The following skill extension instructions apply to this invocation (source: installed domain extensions and/or project-level overrides)." If the output is __NONE__, continue normally.
Step 1: Detection Scan
Run each detection check and collect findings:
1a. Stale Epics
Find epics where ALL child issues are closed but the epic status is still open.
Reality verification before closing: For each child issue with a spec_ref or plan_ref, run verifyIssueCompleted() from lib/reality-check.mjs via inline Node.js. If ANY child issue returns confidence: "none" (status claims closed but no codebase evidence), flag instead of offering to close:
โ Epic <id> has children marked closed but issue <child-id> has no codebase evidence (confidence: none).
Investigate before closing โ implementation may have been reverted or never committed.
Only offer to close when all verified children have confidence >= "medium".
If lib/reality-check.mjs fails to import, proceed without verification (fall back to metadata-only check).
Fix offered: "Close the epic? (verified: all children at medium+ confidence)"
Action: updateEpic(epicId, { status: 'closed', notes: formatConfidenceNote('Reconciled', confidence, {}) })
1b. Unplanned Specs
Find specs with status review-passed that have no sibling .plan.md file.
Fix offered: "Create a plan? โ invoke /adev:plan"
Action: Invoke /adev:plan on the spec (interactive, not batch-safe).
1c. Per-Task Issues to Collapse
Find epics or features that violate the board-granularity invariant โ Issues that carry both planRef and planTask (the legacy per-task issue pattern). These should be collapsed and their state migrated to plan_task events in the lifecycle log.
Fix offered: "Collapse per-task issues for {epicId} into lifecycle log events?"
Action: Invoke the collapse-per-task-issues operation (defined in issue-board-granularity-cleanup.spec.md): for each per-task issue, emit a matching reportPlanTask event with the issue's status, then close() the issue with reason "Migrated to lifecycle log per board-granularity invariant". Post-migration invariant: no Issue carries both planRef and planTask.
1d. Orphaned Issues
Find issues whose planRef points to a file that no longer exists.
Reality verification before closing: For each orphaned issue that has a spec_ref, run verifySpecImplemented() from lib/reality-check.mjs. If the spec's implementation IS found in the codebase (confidence: medium or high), the issue may not be truly orphaned โ the plan file may have been moved or renamed. Flag for manual review instead of auto-closing:
โ Issue <id> has orphaned planRef but spec implementation exists (confidence: <level>).
Plan may have been moved. Verify before closing.
Only offer to close when verifySpecImplemented returns confidence: "none" or "low" (no implementation evidence).
If lib/reality-check.mjs fails to import, proceed without verification.
Fix offered: "Close as obsolete? (verified: no implementation found)"
Action: close(id, 'Closed by reconcile: planRef points to nonexistent file')
1e. Orphaned Plans
Find .plan.md files that have no corresponding epic on the issue board.
Fix offered: "Create an epic for this plan and seed plan-task events?"
Action: Call getIssueManager(manifest).createEpic({ title, planRef }) to create the epic at board-level granularity. Then call reportPlanTask(projectRoot, specPath, { taskNumber, title, status: "pending" }) once per plan task to seed the lifecycle log's plan-task channel. Do NOT call create({ planRef, planTask }) โ per-task issues are forbidden by the board-granularity invariant.
1f. Untraced Code
Find source files with no lifecycle trailers on any commit (post-pipeline only).
Fix offered per file:
- "Create a spec for this file?" โ invoke
/adev:specify --extract <file>
- "Mark as intentionally untracked?" โ no action (acknowledge only)
1g. Missing Source Manifests
Find specs with status implemented or validated that have no source-manifest in frontmatter.
Fix offered: "Stamp source manifest retroactively?"
Action: If the spec has a .plan.md with file lists, collect those files. If they exist, run computeManifest() and stamp the result in the spec frontmatter.
Batch prioritization: Process specs that have existing .plan.md files first (29 specs). Specs without plans require heuristic file matching and should be reviewed individually.
1h. Lifecycle Sync
Detect spec-status, charter-capability, and epic-status drift relative to the lifecycle event log. This is the equivalent of former /adev:validate Check 12 (relocated by check-set-restructure.spec.md), now running in its proper home at reconcile-time rather than per-spec validate-time. Lifecycle reconciliation belongs here because the data is repo-level (one answer per repo), not per-spec, so emitting it from validate produced 49% WARN noise without verdict signal.
What to check:
- Spec
status frontmatter vs lifecycle log currentStep โ flag mismatches (e.g., spec says implemented but log shows no implement completed event; or spec says review-passed but validate already completed with PASS).
- Charter capability
Status column vs lifecycle log per-spec state โ flag capabilities listed as planned or implementing when all contributing specs are validated.
- Plan-task projection drift โ flag plans whose
currentState(spec).planTasks projection has tasks marked pending long past the implement event's completion timestamp (only inform; never auto-flip).
- Epic
status on issue board vs child issue states โ already covered by 1a (Stale Epics).
Fix offered (--fix mode, default): Update spec frontmatter status field to match lifecycle log. Update charter capability Status column. For plan-task reconciliation, emit a reportPlanTask event via lib/lifecycle-state.mjs โ do NOT write - [x] markdown checkbox state into plan files (plan files are immutable post-authoring per plan-task-events.spec.md; the authoritative state lives in the lifecycle log projection).
Fix offered (--no-fix mode): Print WARN for each mismatch with the correct value side-by-side, so the operator can decide whether to apply manually.
Structural equivalence with historic Check 12 output: Each finding from this section carries the same fields a Check 12 WARN body previously carried (path, severity, message, evidence) so users moving between historic .validate.md reports and new reconcile output can map between them without information loss. This satisfies the spec's "destinations preserve structural shape" invariant.
Prompt: "Sync lifecycle for {spec}?" with options [Y/n] in default --fix mode; suppressed in --batch; printed as informational rows in --no-fix.
Step 2: Present and Fix โ One Category at a Time
Start with a one-line summary, then walk through each category sequentially. Present all items in a category as a numbered table, then prompt for each item individually. Apply fixes immediately after each confirmation before moving to the next item.
=== Lifecycle Reconciliation ===
Found N mismatches across M categories.
Walking through each category now.
For each category that has findings:
- Print the category header and a table of all items in that category.
- Prompt for each item one at a time (using the item's row number).
- Apply the fix immediately on confirmation and report the result inline.
- After all items in the category are handled, print a brief tally and move to the next category.
Category presentation format:
---
1a. Stale Epics (2)
โโโโโฌโโโโโโโฌโโโโโโโโโโโโโโโโโโโโโโโโโโฌโโโโโโโโโโโโโโโ
โ # โ Epic โ Title โ Children โ
โโโโโผโโโโโโโผโโโโโโโโโโโโโโโโโโโโโโโโโโผโโโโโโโโโโโโโโโค
โ 1 โ dqx โ Session Orchestration โ 4/4 closed โ
โโโโโผโโโโโโโผโโโโโโโโโโโโโโโโโโโโโโโโโโผโโโโโโโโโโโโโโโค
โ 2 โ z2b โ LS-006 Integration โ 13/13 closed โ
โโโโโดโโโโโโโดโโโโโโโโโโโโโโโโโโโโโโโโโโดโโโโโโโโโโโโโโโ
โ Close dqx? [Y/n]
โ Closed.
โ Close z2b? [Y/n]
โ Closed.
Stale Epics: 2 fixed, 0 skipped.
Prompt styles per category:
| Category | Prompt | Options |
|---|
| Stale Epics | "Close {id}?" | [Y/n] |
| Unplanned Specs | "Plan {spec}?" | [Y/n/skip] โ skip acknowledges without action |
| Partial Epics | "Create {N} missing issues for {epicId}?" | [Y/n] |
| Orphaned Issues | "Close {id} as obsolete?" | [Y/n] |
| Orphaned Plans | "Create epic + issues for {plan}?" | [Y/n] |
| Untraced Code | "Create spec for {file}?" | [Y/n/ignore] โ ignore marks as intentional |
| Missing Source Manifests | "Stamp manifest for {spec}?" | [Y/n] |
| Lifecycle Sync | "Sync lifecycle for {spec}?" | [Y/n] โ --fix default applies; --no-fix prints WARN rows |
Skip empty categories entirely โ do not print headers for categories with zero findings.
Numbering is continuous across categories (item 1-2 in stale epics, 3-6 in unplanned specs, etc.) so the user can refer back to items by number.
Step 3: Summary
=== Reconciliation Complete ===
Applied: N fixes
Skipped: M (user declined)
Failed: K (see errors above)
Changes:
- Closed N stale epics
- Created N missing issues
- Closed N orphaned issues
- Stamped N source manifests
- Created N specs for untraced code
Remaining:
- N unplanned specs (declined โ run /adev:plan manually)
- N untraced files (marked as intentional)
Key Principles
- Interactive by default. Each fix requires user confirmation unless
--batch is used.
- Non-destructive. Reconciliation never deletes files. It closes issues, creates artifacts, and stamps manifests.
- Verify before closing. Before auto-closing any issue or epic, verify the implementation exists in the codebase using
lib/reality-check.mjs. Only close at medium+ confidence. Low/none confidence โ flag for manual review.
- Idempotent. Running reconciliation twice with the same findings produces the same result.
- Detection before repair. Always scan first, present findings, then fix. Never fix without showing what will change.
- Backend agnostic. Works with any configured
tasks.backend.
Red Flags
Never:
- Delete spec files, plan files, or source code
- Modify code to match specs (that's
/adev:implement)
- Create per-task issues (
create({ planRef, planTask })) โ board granularity is epic / feature / bug only; plan-task state lives in the lifecycle log
- Close issues that have unclosed dependencies
- Run
/adev:plan in batch mode (planning requires review)
- Stamp a source manifest without verifying files exist
API reference
Issue board (the reconciliation operations call into the manager, never the on-disk JSON directly):
getIssueManager(manifest) from <ADEV_ROOT>/lib/issues/registry.mjs โ returns the active adapter.IssueManagerInterface โ init, create, update, close, list, get, listEpics, createEpic, updateEpic, addDependency, walkTree.
Lifecycle event log (plan-task channel migration during collapse-per-task-issues):
currentState(projectRoot, specPath) from <ADEV_ROOT>/lib/lifecycle-state.mjs โ read the projection.reportPlanTask(projectRoot, specPath, { taskNumber, title, status }) from <ADEV_ROOT>/lib/lifecycle-state.mjs โ emit a plan_task event to migrate per-task issue state into the lifecycle log.appendEvent(projectRoot, specPath, event) from <ADEV_ROOT>/lib/lifecycle-state.mjs โ low-level append. Reserved for explicit repair workflows that need to backfill a specific event variant; prefer the convenience writers (reportPlanTask, reportReviewer, etc.) wherever possible.
Reality check helpers:
verifyIssueCompleted(issueId, options) and verifySpecImplemented(specPath, options) from <ADEV_ROOT>/lib/reality-check.mjs โ confidence scoring before auto-closing or marking obsolete.
Manifest:
loadManifest(projectRoot) from <ADEV_ROOT>/lib/manifest.mjs โ parses .context-index/manifest.yaml.
