Run any Skill in Manus with one click

ship-pr

Stars5

Forks1

UpdatedJuly 19, 2026 at 06:25

Trigger auto-approve on a PR, wait for the verdict, merge if it passes, and reset to the default branch. Use after hero-skills:review-pr and any bot review when the PR is ready to ship.

Installation

Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.

Run Skill in Manus

Source

ai-hero

ai-hero/hero-skills

View GitHub Repository View Creator Repositories

Download

Run Skill in Manus

Related occupationsSOC

Based on SOC occupation classification

Software DevelopersComputer and Mathematical Occupations·SOC 15-1252

SKILL.md

readonly

Ship — Trigger Auto-Approve, Merge, Reset Local Branch

This skill posts @auto-approve on the PR, waits for the workflow run to finish, reads the verdict, and — if APPROVE — asks whether to merge. If REQUEST_CHANGES, it shows what to fix and offers to re-trigger after fixes land. After a successful merge, it switches to the default branch, pulls latest, deletes the merged head branch (remote + local), and offers cleanup of other stale merged branches (the merged-branch counterpart to hero-skills:abandon). It then runs an advisory post-merge deployment-health check (Kubernetes, VM, PaaS, or serverless, per HERO.md).

Pipeline DAG

This skill is the final step of Pipeline 2 (one-shot) from PIPELINES.md, but it also runs standalone. Its internal DAG is:

gates → trigger → verdict → merge → reset → verify-deploy

Print at each step transition:

[N/6] (✓) gates → (✓) trigger → (▶) verdict → ( ) merge → ( ) reset → ( ) verify-deploy

Now running: verdict

Mapping to the steps below: Step 3 = gates, Step 4 = trigger, Steps 5-6 = verdict, Step 7a = merge, Step 7b = reset (merged-branch cleanup — see Step 7b's own note), Step 7e = verify-deploy (platform-agnostic post-merge deployment-health check). Steps 1-2 are pre-flight (PR identification, workflow-on-default-branch check) and Step 8 is the summary — neither appears in the DAG. Steps 7c (REQUEST_CHANGES) and 7d (WORKFLOW_FAILED) are alternative end states that replace merge, reset, and verify-deploy — there is no merge to verify deployment health for. On those paths render (✗) merge → ( ) reset → ( ) verify-deploy and stop, never (✓) merge → (✓) reset → (✓) verify-deploy.

The workflow lives at .github/workflows/auto-approve.yml. GitHub only honors issue_comment-triggered workflows that already exist on the default branch, so the workflow file must be merged to main (or your default branch) before this skill can do anything useful. This skill checks that first.

Arguments

$ARGUMENTS - PR number or URL (optional)
- If omitted: auto-detect from current branch

Prerequisites

gh CLI installed and authenticated with repo scope
.github/workflows/auto-approve.yml present on the default branch — run hero-skills:init-hero --update to install it
The repo has an ANTHROPIC_API_KEY secret configured (used by the workflow)
kubectl/argocd (k8s deploys) or curl-reachable health endpoints (VM/PaaS) — only needed if HERO.md declares a deployment platform

Instructions

Step 0: Load Hero Configuration

ROOT=$(git rev-parse --show-toplevel 2>/dev/null || pwd)
cat "$ROOT/HERO.md" 2>/dev/null || echo "NO_HERO_CONFIG"

Read HERO.md if it exists. This skill uses:

Repository -> default branch (to confirm the workflow is on it)
CI/CD -> workflow names (to identify the auto-approve run)
Deployment -> platform (kubernetes | vm | serverless | paas | none), namespaces/hosts, health endpoints

If HERO.md is missing, suggest hero-skills:init-hero but proceed with defaults.

Step 1: Identify the PR

If $ARGUMENTS provided:

gh pr view "$ARGUMENTS" --json number,url,headRefName,baseRefName,state,isDraft,mergeable,mergeStateStatus

Otherwise auto-detect from the current branch:

BRANCH=$(git branch --show-current)
# --state all: gh defaults to open-only, which would hide the merged-PR row below.
gh pr list --head "$BRANCH" --state all --json number,url,headRefName,baseRefName,state,isDraft,mergeable,mergeStateStatus --jq '.[0]'

Record PR_NUMBER, PR_URL, PR_BRANCH, BASE_BRANCH, IS_DRAFT.

Decide what to do based on PR state:

State	Action
No PR found	STOP. Tell the user to run `hero-skills:push-pr` first.
Draft PR	STOP. Auto-approve only runs on ready PRs — tell the user to run `hero-skills:review-pr` to mark ready.
`.state=="MERGED"`, `PR_BRANCH` still local	Skip to Step 7b to retry (re-derives `MERGED`, independent of Steps 2-6 — see its `$OWNER`/`$REPO` note).
`.state=="CLOSED"`, or `MERGED` with `PR_BRANCH` already gone	STOP. Report status.
Open, ready	Continue.

Step 2: Verify Auto-Approve Workflow Is on the Default Branch

GitHub only triggers issue_comment workflows that already exist on the default branch. If the file is only on the PR branch, the comment will be a no-op.

DEFAULT_BRANCH=$(gh api "/repos/{owner}/{repo}" --jq '.default_branch')
gh api "/repos/{owner}/{repo}/contents/.github/workflows/auto-approve.yml?ref=$DEFAULT_BRANCH" --jq '.path' 2>/dev/null \
  || echo "MISSING"

If MISSING: STOP and show:

auto-approve.yml is not on the default branch (DEFAULT_BRANCH).

GitHub only honors issue_comment workflows that already exist on the default branch.
Posting @auto-approve here will silently do nothing.

Fix:
  1. Run hero-skills:init-hero --update to install .github/workflows/auto-approve.yml
  2. Open a PR for that workflow file alone, get it reviewed and merged to DEFAULT_BRANCH
  3. Re-run hero-skills:ship-pr

Do not proceed.

Step 3: Hard Gate — All Comments and Reviews Must Be Answered

Do not even post @auto-approve until every reviewer signal has been addressed. The local checks here mirror the workflow's gates so the user gets an immediate, actionable answer instead of waiting on a CI run that will fail anyway.

OWNER_REPO=$(gh repo view --json owner,name --jq '"\(.owner.login) \(.name)"')
OWNER=$(echo "$OWNER_REPO" | awk '{print $1}')
REPO=$(echo "$OWNER_REPO" | awk '{print $2}')
PR_AUTHOR=$(gh api "/repos/$OWNER/$REPO/pulls/$PR_NUMBER" --jq '.user.login')

# 3a — Prior review present (self-review OR reviewer review OR bot inline)
SELF_REVIEW=$(gh api "/repos/$OWNER/$REPO/issues/$PR_NUMBER/comments" \
  --jq '[.[] | select(.body | test("ai-hero:self-review"))] | length')

OTHER_REVIEWS=$(gh api "/repos/$OWNER/$REPO/pulls/$PR_NUMBER/reviews" \
  --jq "[.[] | select(.user.login != \"$PR_AUTHOR\") | select(.state != \"PENDING\")] | length")

BOT_INLINE=$(gh api "/repos/$OWNER/$REPO/pulls/$PR_NUMBER/comments" \
  --jq "[.[] | select(.user.login != \"$PR_AUTHOR\") | select((.user.type == \"Bot\") or (.user.login | test(\"(coderabbit|greptile|copilot|sonarcloud|codeball)\"; \"i\")))] | length")

# 3b — No unresolved review threads (inline conversations)
UNRESOLVED=$(gh api graphql -f query='
  query($owner: String!, $repo: String!, $pr: Int!) {
    repository(owner: $owner, name: $repo) {
      pullRequest(number: $pr) {
        reviewThreads(first: 100) {
          nodes {
            isResolved
            isOutdated
            comments(first: 1) { nodes { path author { login } body } }
          }
        }
      }
    }
  }
' -f owner="$OWNER" -f repo="$REPO" -F pr=$PR_NUMBER \
  --jq '[.data.repository.pullRequest.reviewThreads.nodes[] | select(.isResolved == false) | select(.isOutdated == false)] | length')

# 3c — No active CHANGES_REQUESTED review left standing. A
# CHANGES_REQUESTED is "active" if it is the latest review from that
# reviewer and has not been dismissed. Use the GraphQL latestReviews
# field which returns the most recent review per author.
ACTIVE_CHANGES=$(gh api graphql -f query='
  query($owner: String!, $repo: String!, $pr: Int!) {
    repository(owner: $owner, name: $repo) {
      pullRequest(number: $pr) {
        latestReviews(first: 50) {
          nodes { state author { login } }
        }
      }
    }
  }
' -f owner="$OWNER" -f repo="$REPO" -F pr=$PR_NUMBER \
  --jq '[.data.repository.pullRequest.latestReviews.nodes[] | select(.state == "CHANGES_REQUESTED")] | length')

# 3d — No unanswered top-level reviewer questions. A top-level issue
# comment from a non-author with no later comment from the author is a
# question the author has not answered. We flag any such comment whose
# id is greater than the author's most recent comment id.
LAST_AUTHOR_COMMENT_ID=$(gh api "/repos/$OWNER/$REPO/issues/$PR_NUMBER/comments" \
  --jq "[.[] | select(.user.login == \"$PR_AUTHOR\")] | (last // {id: 0}) | .id")
UNANSWERED_QUESTIONS=$(gh api "/repos/$OWNER/$REPO/issues/$PR_NUMBER/comments" \
  --jq "[.[]
    | select(.user.login != \"$PR_AUTHOR\")
    | select((.user.type != \"Bot\") and ((.user.login | test(\"(coderabbit|greptile|copilot|sonarcloud|codeball|github-actions)\"; \"i\")) | not))
    | select(.id > ${LAST_AUTHOR_COMMENT_ID:-0})
  ] | length")

Show the user the gate result:

Pre-flight gates for PR #PR_NUMBER:
  Prior review present:       SELF_REVIEW self-review + OTHER_REVIEWS reviewer + BOT_INLINE bot
  Unresolved threads:         UNRESOLVED   (must be 0)
  Active CHANGES_REQUESTED:   ACTIVE_CHANGES (must be 0 — re-request review or push fixes)
  Unanswered reviewer Qs:     UNANSWERED_QUESTIONS (must be 0 — reply to each)

This is a hard gate, not a warning. Stop and refuse to post @auto-approve if any of the following:

(SELF_REVIEW + OTHER_REVIEWS + BOT_INLINE) == 0 — no prior review at all. Run hero-skills:review-pr.
UNRESOLVED > 0 — inline review threads still open. Run hero-skills:respond-to-comments to address them and resolve the threads.
ACTIVE_CHANGES > 0 — a reviewer's latest review still says CHANGES_REQUESTED. Address the change request, push fixes, then ask the reviewer to dismiss it or submit a fresh review (a subsequent APPROVED review supersedes it in latestReviews).
UNANSWERED_QUESTIONS > 0 — top-level questions from human reviewers with no author reply. List each one (gh api .../issues/$PR_NUMBER/comments --jq '.[] | select(.id > LAST_AUTHOR_COMMENT_ID) | {user: .user.login, body: .body[0:200], url: .html_url}') and tell the user to reply to each before re-running.

Show the offending items inline so the user can act:

Cannot run hero-skills:ship-pr yet. Address these first:

  Unresolved threads (3):
    - api/users.ts:42 — @reviewer: "Handle the null case here"
    - ...

  Active CHANGES_REQUESTED reviews (1):
    - @reviewer1 — push fixes and ask them to re-review or dismiss

  Unanswered reviewer questions (1):
    - @reviewer (PR_URL#issuecomment-12345): "Why not use the existing helper?"

Recommended next step: hero-skills:respond-to-comments

Do not proceed. Do not post @auto-approve.

Only when all four gates pass continue to Step 4.

Step 4: Post the @auto-approve Trigger Comment

Record the timestamp first so we can find the workflow run we just triggered without confusing it with prior runs.

TRIGGERED_AT=$(date -u +%Y-%m-%dT%H:%M:%SZ)
gh pr comment $PR_NUMBER --body "@auto-approve"

The workflow run is keyed off the issue_comment event, not a commit SHA. We capture TRIGGERED_AT so Step 5 can disambiguate this run from prior Auto Approve runs on the same PR.

Step 5: Wait for the Workflow Run

Poll for the most recent Auto Approve workflow run that started after TRIGGERED_AT. Implement the lookup as two explicit calls — not a piped xargs -I{}. Empty-input behavior of xargs differs between GNU and BSD/macOS: BSD will run the command with {} substituted as the empty string, producing a malformed URL silently. Capture the workflow ID first, bail out loudly if it is empty, then poll the runs endpoint directly:

WF_ID=$(gh api "/repos/{owner}/{repo}/actions/workflows" \
  --jq '.workflows[] | select(.name == "Auto Approve") | .id' | head -1)

if [ -z "$WF_ID" ]; then
  echo "Auto Approve workflow not found in this repo. Did the workflow file land on the default branch yet?"
  exit 1
fi

RUN_ID=""
for i in 1 2 3 4 5 6 7 8 9 10; do
  RUN_JSON=$(gh api "/repos/{owner}/{repo}/actions/workflows/$WF_ID/runs?event=issue_comment&per_page=10" \
    --jq "[.workflow_runs[] | select(.created_at > \"$TRIGGERED_AT\")] | .[0]")
  if [ -n "$RUN_JSON" ] && [ "$RUN_JSON" != "null" ]; then
    RUN_ID=$(echo "$RUN_JSON" | jq -r '.id')
    break
  fi
  sleep 5
done

If no run appears within ~50 seconds, surface a clear error:

Could not find an Auto Approve workflow run for the @auto-approve comment.

Common causes:
  - auto-approve.yml is not on the default branch (re-check Step 2)
  - The ANTHROPIC_API_KEY repo secret is missing
  - GitHub Actions is disabled for this repo

Visit PR_URL/checks to investigate.

Stop here.

Once RUN_ID is found, poll until the run completes. The loop has a hard 5-minute timeout — without it, a hung workflow blocks indefinitely with no surfaced error:

WAIT_START=$SECONDS
while true; do
  if (( SECONDS - WAIT_START > 300 )); then
    RUN_URL=$(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.html_url')
    echo "Timed out waiting for run $RUN_ID after 5 minutes."
    echo "Visit $RUN_URL to check status manually, then ask the user whether to keep waiting or stop."
    break
  fi
  STATUS=$(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.status')
  CONCLUSION=$(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.conclusion')
  [ "$STATUS" = "completed" ] && break
  sleep 10
done

Step 6: Read the Verdict

The workflow posts a single PR comment marked with  and submits a review. Either is enough to read the verdict — but if both are missing the run aborted before posting anything, and we treat it as WORKFLOW_FAILED rather than parsing a null value as success.

# Latest auto-approve comment body — `// empty` collapses missing/null
# to an empty string instead of the literal "null".
COMMENT_BODY=$(gh api "/repos/{owner}/{repo}/issues/$PR_NUMBER/comments" \
  --jq '[.[] | select(.body | startswith("<!-- claude-approve -->"))] | (last // {}) | (.body // empty)')

# Most recent review submitted by github-actions[bot] (state only).
REVIEW_STATE=$(gh api "/repos/{owner}/{repo}/pulls/$PR_NUMBER/reviews" \
  --jq '[.[] | select(.user.login == "github-actions[bot]")] | (last // {}) | (.state // empty)')

if [ -z "$COMMENT_BODY" ] && [ -z "$REVIEW_STATE" ]; then
  echo "Workflow completed but posted neither a verdict comment nor a review."
  echo "Run conclusion: $CONCLUSION"
  echo "Run URL:        $(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.html_url')"
  echo "Treating as WORKFLOW_FAILED — see logs for the failing step."
  VERDICT="WORKFLOW_FAILED"
elif [ "$REVIEW_STATE" = "APPROVED" ]; then
  VERDICT="APPROVE"
elif [ "$REVIEW_STATE" = "CHANGES_REQUESTED" ]; then
  VERDICT="REQUEST_CHANGES"
elif [ "$CONCLUSION" != "success" ]; then
  VERDICT="WORKFLOW_FAILED"
else
  # Comment exists but review state was unexpected — fail closed.
  VERDICT="REQUEST_CHANGES"
fi

Show the comment body to the user verbatim — it contains the gate results and Claude's per-check reasoning the user needs to act on.

Step 7: Act on the Verdict

Step 7a: APPROVE Path — Offer to Merge

Resolve the merge method from HERO.md (default squash), normalize the value (lowercase, strip quotes/whitespace) so Squash, "squash", squash all resolve to squash, and reject anything else loudly:

# shellcheck source=/dev/null
. "${CLAUDE_PLUGIN_ROOT:-$HOME/.claude/plugins/hero-skills}/scripts/hero-lib.sh"
MERGE_METHOD_RAW=$(hero_field merge-method || true)
MERGE_METHOD=$(printf '%s' "${MERGE_METHOD_RAW:-squash}" \
  | tr -d '[:space:]' | tr -d '"' | tr -d "'" | tr '[:upper:]' '[:lower:]')

case "$MERGE_METHOD" in
  squash|rebase|merge) ;;
  *)
    echo "ERROR: HERO.md merge-method='$MERGE_METHOD_RAW' is not one of squash|rebase|merge."
    echo "Fix HERO.md or pass the method explicitly when merging. Aborting."
    exit 1
    ;;
esac
MERGE_FLAG="--$MERGE_METHOD"

gh pr view $PR_NUMBER --json mergeable,mergeStateStatus,reviewDecision,statusCheckRollup,headRefName

Then ask:

Auto-approve PASSED on PR #PR_NUMBER.

Mergeable:        MERGEABLE_VALUE
Merge state:      MERGE_STATE_STATUS
Review decision:  REVIEW_DECISION
Required checks:  SUMMARY (e.g. 5 passing, 0 failing)
Merge method:     MERGE_METHOD (from HERO.md)

Merge now? [y/N]
  y -> merge with MERGE_METHOD
  n -> stop here, I will merge manually

Wait for explicit confirmation. If the user says yes, attempt --auto first. If that fails, inspect the failure reason before deciding whether to retry without --auto:

gh pr merge $PR_NUMBER $MERGE_FLAG --auto 2> merge_err.log
RC=$?

if [ $RC -ne 0 ]; then
  if grep -qi "auto.merge.*not.*enabled\|auto-merge is not allowed" merge_err.log; then
    # Repo has auto-merge disabled — fall back to immediate merge with
    # the same method. This is safe: branch protection still applies.
    gh pr merge $PR_NUMBER $MERGE_FLAG
  else
    # Branch protection, missing checks, conflicts, permissions — surface
    # the error and stop. Do NOT retry without --auto, because that path
    # bypasses the wait-for-checks safety net.
    cat merge_err.log
    echo "Merge failed. Resolve the underlying issue and re-run hero-skills:ship-pr, or merge manually."
    exit 1
  fi
fi

Never force-merge or override branch protection. Never pass --admin. The fallback above is only for the specific "auto-merge not enabled on this repo" case; every other failure is surfaced and stops the skill.

Step 7b: Reset to the Default Branch (the merged-branch counterpart to `hero-skills:abandon`)

After a successful merge, leave the user on the default branch, pulled, with the merged PR branch cleaned up — we're usually still on the just-merged head. abandon mirrors this for the never-merged case; not shared logic.

If Step 1 skipped straight here, $OWNER/$REPO were never set (only Step 3 sets them):

if [ -z "$OWNER" ] || [ -z "$REPO" ]; then
  OWNER_REPO=$(gh repo view --json owner,name --jq '"\(.owner.login) \(.name)"')
  OWNER=$(echo "$OWNER_REPO" | awk '{print $1}')
  REPO=$(echo "$OWNER_REPO" | awk '{print $2}')
fi

Order matters:

Confirm the merge actually landed.
Switch to BASE_BRANCH before deleting the head branch locally — git branch -d fails if you are on the branch you want to delete.
Pull BASE_BRANCH so the local copy includes the squash/merge commit.
Delete the remote head branch (unless GitHub auto-delete or HERO.md disables it).
Delete the local head branch with -d (refuses unmerged history — that is a feature). If -d refuses, fall back to -D only when the local branch tip is confirmed to be exactly the PR's merged head (via headRefOid) — never on MERGED=true alone, since that only proves the PR merged, not that the local branch has no commits beyond it.
Offer to clean up other stale merged local branches.
Suggest /clear so the next task starts on a fresh context.

Wrap the whole block in an if so an early return cannot kill the wrapping shell, and surface real errors instead of speculating about their cause.

sleep 3
# `--json merged` isn't a valid gh CLI field (gh 2.86.0 rejects unknown
# --json names locally, before any API call) — derive from `state`. Also
# check gh's own exit status: an auth/network failure here must not read
# as "not merged yet" (both would otherwise leave MERGED empty).
if ! MERGED=$(gh pr view $PR_NUMBER --json state --jq 'if .state == "MERGED" then "true" else "false" end' 2>/tmp/ship_pr_merge_check_err.log); then
  echo "WARN: could not check merge status via 'gh pr view' — see error below."
  cat /tmp/ship_pr_merge_check_err.log
  echo "Resolve (check 'gh auth status' / network) and re-run 'hero-skills:ship-pr' to retry."
  MERGED=false
fi
rm -f /tmp/ship_pr_merge_check_err.log
RESET_OK=true   # cleared if any sync step (checkout/pull/fetch) fails. Gates
                # the cleanup steps below — never delete branches based on a
                # stale local view of $BASE_BRANCH.

if [ "$MERGED" != "true" ]; then
  echo "Merge not yet recorded — skipping branch reset."
else
  # 1. Switch to BASE_BRANCH first if we are still on the merged head.
  #    Hard-failing checkout post-merge would leave the user stuck on the
  #    merged head with no recovery path. Instead, surface the state, set
  #    RESET_OK=false, and let the user finish the reset manually.
  CURRENT=$(git branch --show-current)
  if [ "$CURRENT" = "$PR_BRANCH" ]; then
    echo "Switching from $PR_BRANCH to $BASE_BRANCH..."
    if ! git checkout "$BASE_BRANCH"; then
      RESET_OK=false
      echo ""
      echo "Could not checkout $BASE_BRANCH. The merge already landed remotely,"
      echo "but you are still on $PR_BRANCH locally."
      echo ""
      echo "Likely causes:"
      echo "  - Uncommitted local edits — check 'git status'"
      echo "  - The local $BASE_BRANCH ref is divergent or missing"
      echo ""
      echo "Resolve manually, then re-run 'hero-skills:ship-pr' to retry."
      echo "Skipping branch deletion + stale-cleanup so we do not act on a"
      echo "stale local view of $BASE_BRANCH."
    fi
  elif [ "$CURRENT" != "$BASE_BRANCH" ]; then
    # User happens to be on a third branch. Leave them there, but flag
    # that this skill is NOT refreshing $BASE_BRANCH locally — otherwise the
    # next task starts from a stale base.
    echo "You are on '$CURRENT', neither '$PR_BRANCH' nor '$BASE_BRANCH'."
    echo "Leaving you here. Note: this skill is NOT pulling $BASE_BRANCH —"
    echo "run 'git fetch origin $BASE_BRANCH' yourself before branching off it."
    RESET_OK=false   # cannot safely run cleanup against a possibly-stale ref
  fi

  # 2. Pull latest into BASE_BRANCH (only if we ended up on it AND the
  #    checkout above succeeded). A non-fast-forward pull means the local
  #    BASE_BRANCH is divergent from origin — a subsequent
  #    "git branch --merged origin/BASE_BRANCH" would judge against a stale
  #    ref, so we fail closed and skip the deletion + cleanup steps.
  CURRENT=$(git branch --show-current)
  if [ "$RESET_OK" = "true" ] && [ "$CURRENT" = "$BASE_BRANCH" ]; then
    if ! git pull --ff-only origin "$BASE_BRANCH"; then
      RESET_OK=false
      echo ""
      echo "WARN: 'git pull --ff-only origin $BASE_BRANCH' failed."
      echo "      The local $BASE_BRANCH is divergent from origin. Skipping"
      echo "      branch deletion and stale-branch cleanup to avoid acting"
      echo "      on a stale reference. Resolve with:"
      echo "        git status; git fetch origin $BASE_BRANCH"
      echo "      then re-run 'hero-skills:ship-pr' to retry."
    fi
  fi
fi

# 3. Remote head-branch cleanup — only when sync succeeded.
if [ "$RESET_OK" = "true" ] && [ "$MERGED" = "true" ]; then
  # Treat null/empty deleteBranchOnMerge as unknown and defer to HERO.md.
  # Non-admins may not see this field.
  AUTO_DELETE=$(gh repo view --json deleteBranchOnMerge --jq '.deleteBranchOnMerge // empty' 2>/dev/null)

  HERO_AUTO_DELETE=$(hero_field auto-delete-branches 2>/dev/null | tr '[:upper:]' '[:lower:]')
  HERO_AUTO_DELETE=${HERO_AUTO_DELETE:-true}

  if [ "$AUTO_DELETE" = "true" ]; then
    # By the time we reach this branch the merge has already happened and
    # GitHub has already deleted the remote ref. Past-tense, not future.
    echo "GitHub auto-deleted $PR_BRANCH on merge (repo deleteBranchOnMerge=true)."
  elif [ "$HERO_AUTO_DELETE" != "true" ]; then
    echo "Skipping remote branch cleanup (HERO.md auto-delete-branches=$HERO_AUTO_DELETE)."
  else
    # Distinguish 404/422 ("already gone — fine") from 401/403 ("permission
    # denied — surface, do not silently mask").
    DELETE_STATUS=$(gh api -X DELETE "/repos/$OWNER/$REPO/git/refs/heads/$PR_BRANCH" \
      -i 2>/dev/null | awk 'NR==1 {print $2; exit}')
    case "$DELETE_STATUS" in
      204|200)        echo "Deleted remote branch: $PR_BRANCH" ;;
      404|422)        echo "Remote branch $PR_BRANCH already gone." ;;
      401|403)        echo "WARN: cannot delete remote $PR_BRANCH — permission denied (HTTP $DELETE_STATUS). Delete it manually if needed." ;;
      *)              echo "WARN: remote delete returned HTTP ${DELETE_STATUS:-error}. Re-check $PR_URL and remove the branch manually if needed." ;;
    esac
  fi

  # 4. Local head-branch cleanup. We're on BASE_BRANCH now. Check the actual
  #    exit status, not stderr emptiness — `git branch -d` can print a
  #    non-fatal "not yet merged to HEAD" warning on a *successful* delete
  #    (squash/rebase merges break linear ancestry, but an upstream-tracking
  #    ref still shows it merged) — stderr-emptiness would misreport that as
  #    a failure.
  CURRENT=$(git branch --show-current)
  if [ "$CURRENT" = "$PR_BRANCH" ]; then
    # Should not happen — checkout above handled it. Skip defensively.
    echo "Still on $PR_BRANCH after checkout attempt. Skipping local delete."
  elif git show-ref --verify --quiet "refs/heads/$PR_BRANCH"; then
    if git branch -d "$PR_BRANCH" 2>&1; then
      echo "Deleted local branch: $PR_BRANCH"
    else
      # MERGED=true only proves the PR merged, not that the local tip has no
      # commits beyond it (a forgotten local commit, an amend). Verify the
      # local tip IS the merged PR head before force-deleting.
      PR_HEAD_SHA=$(gh pr view $PR_NUMBER --json headRefOid --jq '.headRefOid' 2>/dev/null)
      LOCAL_SHA=$(git rev-parse "$PR_BRANCH" 2>/dev/null)
      if [ -n "$PR_HEAD_SHA" ] && [ "$LOCAL_SHA" = "$PR_HEAD_SHA" ]; then
        if git branch -D "$PR_BRANCH" 2>&1; then
          echo "Deleted local branch: $PR_BRANCH (forced — local tip matched the merged PR head $PR_HEAD_SHA)"
        else
          echo "WARN: could not delete local $PR_BRANCH even with -D. Investigate manually."
        fi
      else
        echo "WARN: local $PR_BRANCH ($LOCAL_SHA) does not match the merged PR head ($PR_HEAD_SHA)."
        echo "  It may have local-only commits that were never part of the merged PR — not force-deleting."
        echo "  Investigate; delete manually with 'git branch -D $PR_BRANCH' only if you're sure."
      fi
    fi
  fi

  # 5. Offer to clean up other merged-but-stale local branches. Distinguish
  #    "no stale branches" from "cannot check" — a missing
  #    refs/remotes/origin/$BASE_BRANCH means git branch --merged returns
  #    nothing, which would silently look identical to "all clean".
  if ! git show-ref --verify --quiet "refs/remotes/origin/$BASE_BRANCH"; then
    echo ""
    echo "Skipping stale-branch cleanup: refs/remotes/origin/$BASE_BRANCH is"
    echo "missing locally. Run 'git fetch origin' and re-check yourself."
  elif ! git fetch --prune origin >/dev/null 2>&1; then
    echo ""
    echo "Skipping stale-branch cleanup: 'git fetch --prune origin' failed."
    echo "Resolve manually before deleting any branches."
  else
    STALE=$(git branch --merged "origin/$BASE_BRANCH" \
      | grep -vE '^\*' \
      | grep -vE "^[[:space:]]*${BASE_BRANCH}$" \
      | sed 's/^[[:space:]]*//' \
      | grep -v '^$' \
      | grep -v "^$PR_BRANCH$" || true)

    if [ -n "$STALE" ]; then
      echo ""
      echo "Other local branches fully merged into $BASE_BRANCH (candidates for cleanup):"
      echo "$STALE" | sed 's/^/  - /'
      echo ""
      echo "Delete them now? [y/N]"
    fi
  fi
fi

# 6. Tidy up the merge-error tempfile from Step 7a regardless of success.
rm -f merge_err.log

If the user confirms the cleanup prompt above, run git branch -d BRANCH_NAME for each listed branch. Do NOT use -D — refuse to force-delete.

After the cleanup, suggest (do not auto-execute) running /clear to start the next task on a fresh conversation context. The orchestrating skill (e.g. hero-skills:one-shot) may want to print its own summary first, so do not clobber the conversation here.

Step 7c: REQUEST_CHANGES Path — Surface and Offer Next Steps

Show the verdict comment, then ask:

Auto-approve REQUESTED CHANGES on PR #PR_NUMBER.

(reasons from the verdict comment)

What would you like to do?
  1. hero-skills:respond-to-comments  -> address the unresolved comments and re-run
  2. Re-trigger @auto-approve once I have addressed the items above
  3. Stop here

If the user picks 2, return to Step 3 (re-check pre-flight, then post a fresh @auto-approve comment). The workflow updates its prior  comment in place, so re-running does not spam the PR.

Step 7d: WORKFLOW_FAILED Path

Surface the run URL and the failing step:

gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.html_url'
gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID/jobs" \
  --jq '.jobs[].steps[] | select(.conclusion == "failure") | {name, conclusion, number}'

Suggest the most likely fixes (missing ANTHROPIC_API_KEY, GitHub token permissions, repo secrets disabled). Do not retry automatically.

Step 7e: Verify Deployment Health (post-merge)

Runs only on the APPROVE + merged path, gated on MERGED == "true" from Step 7b. REQUEST_CHANGES (7c), WORKFLOW_FAILED (7d), and declined-merge paths have no merge to check the deployment health of, so this step does not run there — it is skipped entirely, not rendered as failed.

This check is advisory only. It surfaces a DEGRADED or unreachable deployment loudly so the user can act, but it never un-merges, reverts, or blocks anything that already landed in Step 7a.

if [ "$MERGED" != "true" ]; then
  DEPLOY_STATUS="skipped"
else
  DEPLOY_PLATFORM=$(hero_field platform 2>/dev/null | tr '[:upper:]' '[:lower:]')
  DEPLOY_PLATFORM=${DEPLOY_PLATFORM:-none}
fi

Dispatch on $DEPLOY_PLATFORM:

kubernetes — read-only cluster health (nodes, pods, deployments, optional ArgoCD):

kubectl config current-context
kubectl cluster-info --request-timeout=5s

If the connection fails, report Deployment: skipped (kubectl unreachable) and stop here — an unreachable cluster is not the same as a DEGRADED one.

# A failed query must never be mistaken for "all healthy": empty output means
# healthy ONLY when the query itself succeeded. Capture each command's exit
# status and set CHECK_FAILED on any failure. `set -o pipefail` so a kubectl
# failure piped into jq is not masked by jq's own exit code.
set -o pipefail
CHECK_FAILED=false

# Nodes — Ready/NotReady and pressure conditions
kubectl get nodes -o jsonpath='{range .items[*]}{.metadata.name}{"\t"}{range .status.conditions[*]}{.type}={.status}{"\t"}{end}{"\n"}{end}' || CHECK_FAILED=true

# Pods — anything not Running/Succeeded, plus crashloops
PODS_OUT=$(kubectl get pods --all-namespaces --field-selector=status.phase!=Running,status.phase!=Succeeded -o wide 2>&1) \
  && printf '%s\n' "$PODS_OUT" \
  || { echo "WARN: pod-status query failed: $PODS_OUT"; CHECK_FAILED=true; }
kubectl get pods --all-namespaces -o json \
  | jq -r '.items[] | select(.status.containerStatuses[]?.restartCount > 5) | "\(.metadata.namespace)/\(.metadata.name) restarts=\(.status.containerStatuses[0].restartCount)"' \
  || CHECK_FAILED=true

# Deployments — ready vs desired replica counts
kubectl get deployments --all-namespaces -o json \
  | jq -r '.items[] | select(.status.readyReplicas != .status.replicas) | "\(.metadata.namespace)/\(.metadata.name) ready=\(.status.readyReplicas // 0)/\(.status.replicas)"' \
  || CHECK_FAILED=true

If HERO.md flags ArgoCD for this deployment, also check sync/health:

# Try the argocd CLI; fall back to kubectl. If BOTH fail, ArgoCD state is
# unknown — record that rather than treating empty output as "all Synced".
if ! argocd app list -o json 2>/dev/null \
     | jq -r '.[] | "\(.metadata.name)\t\(.status.sync.status)\t\(.status.health.status)"'; then
  if ! kubectl get applications -n argocd -o json 2>/dev/null \
       | jq -r '.items[] | "\(.metadata.name)\tsync=\(.status.sync.status)\thealth=\(.status.health.status)"'; then
    echo "WARN: could not query ArgoCD via the argocd CLI or kubectl."
    CHECK_FAILED=true
  fi
fi

Classify in this order:

UNKNOWN (could not verify) when CHECK_FAILED is true — a health query itself failed (RBAC denial, missing argocd binary, apiserver error, expired token). This is not the same as healthy; report it as could not verify deployment health so the user investigates rather than trusting a false green.
Otherwise HEALTHY (all nodes Ready, no crashlooping/pending pods, all deployments at desired replica count, ArgoCD Synced/Healthy where checked) vs DEGRADED (any NotReady node, any crashlooping/pending pod, any under-replica'd deployment, or ArgoCD OutOfSync/Degraded/Missing).

vm / paas / serverless — curl the HERO.md-configured health endpoint(s). HERO.md's Deployment section lists one or more, e.g. - health-endpoint: https://api.example.com/healthz; read them all first:

# hero_field returns only the FIRST match; health-endpoint legitimately repeats,
# so this list is read directly.
HEALTH_ENDPOINTS=$(awk -F': ' '/^- health-endpoint:/ {print $2}' "$ROOT/HERO.md" 2>/dev/null `# hero-lint: allow-inline` \
  | tr -d '"' | tr -d "'")

if [ -z "$HEALTH_ENDPOINTS" ]; then
  echo "No health endpoint configured for $DEPLOY_PLATFORM — skipping."
  DEPLOY_STATUS="skipped"
else
  DEPLOY_STATUS="HEALTHY"
  # Here-string (not `... | while`): a pipeline runs the loop in a subshell,
  # so DEPLOY_STATUS assignments inside it would be discarded. curl emits 000
  # on timeout/unreachable, which the non-2xx branch correctly treats as
  # DEGRADED.
  while read -r URL; do
    [ -z "$URL" ] && continue
    CODE=$(curl -s -o /dev/null -w '%{http_code}' --max-time 5 "$URL")
    echo "$URL -> HTTP $CODE"
    case "$CODE" in
      2??) ;;                          # 2xx — healthy
      *)   DEPLOY_STATUS="DEGRADED" ;; # non-2xx or 000 (timeout/unreachable)
    esac
  done <<< "$HEALTH_ENDPOINTS"
fi

Treat a missing endpoint list as skipped, not DEGRADED — there is nothing configured to check. Otherwise the loop above sets HEALTHY (every endpoint returns 2xx) vs DEGRADED (any non-2xx response or timeout).

none or missing — skip silently; render (–) for this phase in the DAG and Summary.

Report the result as HEALTHY, DEGRADED, UNKNOWN (could not verify — a health query failed), or skipped (no platform configured), along with the raw evidence (offending node/pod/deployment names, the failing endpoint and status code, or the query that errored) so the user can act on it directly. Never suggest un-merging — end a DEGRADED result with a note like "Deployment looks DEGRADED — investigate, but the merge itself stands."

Step 8: Summary

Render the Pipeline DAG line conditionally on the verdict, whether the user merged, and the deployment-health result. Use the marker semantics from PIPELINES.md:

APPROVE + merged + reset succeeded + deploy healthy → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (✓) verify-deploy
APPROVE + merged + reset succeeded + deploy DEGRADED → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (✗) verify-deploy
APPROVE + merged + reset succeeded + deploy UNKNOWN (a health query failed) → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (✗) verify-deploy with a could not verify deployment health note (distinct from DEGRADED — the deployment may be fine; the check couldn't confirm it)
APPROVE + merged + reset succeeded + no platform configured (skipped) → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (–) verify-deploy
APPROVE + merged + reset partial (RESET_OK=false) → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✗) reset → (✓|✗|–) verify-deploy — verify-deploy still runs off MERGED == true, independent of the reset outcome
APPROVE + user declined merge → (✓) gates → (✓) trigger → (✓) verdict → (✗) merge → ( ) reset → ( ) verify-deploy with Stopped: user declined merge
REQUEST_CHANGES → (✓) gates → (✓) trigger → (✓) verdict → (✗) merge → ( ) reset → ( ) verify-deploy with Stopped: REQUEST_CHANGES
WORKFLOW_FAILED → (✓) gates → (✓) trigger → (✗) verdict → ( ) merge → ( ) reset → ( ) verify-deploy with Stopped: WORKFLOW_FAILED

Ship Summary
=========================
PR:        #PR_NUMBER - PR_TITLE
Branch:    PR_BRANCH -> BASE_BRANCH

Pipeline:  (CONDITIONAL_DAG_LINE_FROM_ABOVE)

Verdict:   APPROVE | REQUEST_CHANGES | WORKFLOW_FAILED
Run:       RUN_URL

Deployment: HEALTHY | DEGRADED | UNKNOWN | skipped

Action taken:
  - Merged with MERGE_METHOD (sha SHORT_SHA)            # APPROVE + user said yes
  - Reset: switched to BASE_BRANCH, pulled, deleted PR_BRANCH (remote+local)
  - Stale-branch cleanup: deleted N | offered N | none found | skipped (sync failed)
  - Left for manual merge                                # APPROVE + user said no
  - Suggested hero-skills:respond-to-comments             # REQUEST_CHANGES
  - Stopped, action failure surfaced                     # WORKFLOW_FAILED

Next step: (one only — omit for REQUEST_CHANGES/WORKFLOW_FAILED, already covered by 7c/7d)

Merged → /clear — plain suggestion, not Skill-tool invocable, no y/N offer.
Abandoning mid-flight → hero-skills:abandon — restricted, print only.

Skip hero-skills:one-shot; it's not the deterministic next action.

Notes

The workflow's gates (prior review present, all threads resolved) run before Claude is invoked. A failed gate is the cheap path; do not assume Claude is wrong if the verdict comes back fast.
Auto-approve is one signal among many. Branch protection, CODEOWNERS, and required status checks still apply — gh pr merge will fail loudly if any of those block the merge, and that is the correct behavior.
Re-running @auto-approve is safe. The workflow updates the same comment and submits a fresh review, so the PR history shows the latest verdict without duplicates.
Never use --admin to bypass branch protection during merge, even if the user asks. Stop and let them merge manually if protection blocks.

name	ship-pr
description	Trigger auto-approve on a PR, wait for the verdict, merge if it passes, and reset to the default branch. Use after hero-skills:review-pr and any bot review when the PR is ready to ship.
argument-hint	["pr-number"]

Ship — Trigger Auto-Approve, Merge, Reset Local Branch

Pipeline DAG

This skill is the final step of Pipeline 2 (one-shot) from PIPELINES.md, but it also runs standalone. Its internal DAG is:

gates → trigger → verdict → merge → reset → verify-deploy

Print at each step transition:

[N/6] (✓) gates → (✓) trigger → (▶) verdict → ( ) merge → ( ) reset → ( ) verify-deploy

Now running: verdict

Arguments

$ARGUMENTS - PR number or URL (optional)
- If omitted: auto-detect from current branch

Prerequisites

gh CLI installed and authenticated with repo scope
.github/workflows/auto-approve.yml present on the default branch — run hero-skills:init-hero --update to install it
The repo has an ANTHROPIC_API_KEY secret configured (used by the workflow)
kubectl/argocd (k8s deploys) or curl-reachable health endpoints (VM/PaaS) — only needed if HERO.md declares a deployment platform

Instructions

Step 0: Load Hero Configuration

ROOT=$(git rev-parse --show-toplevel 2>/dev/null || pwd)
cat "$ROOT/HERO.md" 2>/dev/null || echo "NO_HERO_CONFIG"

Read HERO.md if it exists. This skill uses:

Repository -> default branch (to confirm the workflow is on it)
CI/CD -> workflow names (to identify the auto-approve run)
Deployment -> platform (kubernetes | vm | serverless | paas | none), namespaces/hosts, health endpoints

If HERO.md is missing, suggest hero-skills:init-hero but proceed with defaults.

Step 1: Identify the PR

If $ARGUMENTS provided:

gh pr view "$ARGUMENTS" --json number,url,headRefName,baseRefName,state,isDraft,mergeable,mergeStateStatus

Otherwise auto-detect from the current branch:

BRANCH=$(git branch --show-current)
# --state all: gh defaults to open-only, which would hide the merged-PR row below.
gh pr list --head "$BRANCH" --state all --json number,url,headRefName,baseRefName,state,isDraft,mergeable,mergeStateStatus --jq '.[0]'

Record PR_NUMBER, PR_URL, PR_BRANCH, BASE_BRANCH, IS_DRAFT.

Decide what to do based on PR state:

State	Action
No PR found	STOP. Tell the user to run `hero-skills:push-pr` first.
Draft PR	STOP. Auto-approve only runs on ready PRs — tell the user to run `hero-skills:review-pr` to mark ready.
`.state=="MERGED"`, `PR_BRANCH` still local	Skip to Step 7b to retry (re-derives `MERGED`, independent of Steps 2-6 — see its `$OWNER`/`$REPO` note).
`.state=="CLOSED"`, or `MERGED` with `PR_BRANCH` already gone	STOP. Report status.
Open, ready	Continue.

Step 2: Verify Auto-Approve Workflow Is on the Default Branch

GitHub only triggers issue_comment workflows that already exist on the default branch. If the file is only on the PR branch, the comment will be a no-op.

DEFAULT_BRANCH=$(gh api "/repos/{owner}/{repo}" --jq '.default_branch')
gh api "/repos/{owner}/{repo}/contents/.github/workflows/auto-approve.yml?ref=$DEFAULT_BRANCH" --jq '.path' 2>/dev/null \
  || echo "MISSING"

If MISSING: STOP and show:

auto-approve.yml is not on the default branch (DEFAULT_BRANCH).

GitHub only honors issue_comment workflows that already exist on the default branch.
Posting @auto-approve here will silently do nothing.

Fix:
  1. Run hero-skills:init-hero --update to install .github/workflows/auto-approve.yml
  2. Open a PR for that workflow file alone, get it reviewed and merged to DEFAULT_BRANCH
  3. Re-run hero-skills:ship-pr

Do not proceed.

Step 3: Hard Gate — All Comments and Reviews Must Be Answered

OWNER_REPO=$(gh repo view --json owner,name --jq '"\(.owner.login) \(.name)"')
OWNER=$(echo "$OWNER_REPO" | awk '{print $1}')
REPO=$(echo "$OWNER_REPO" | awk '{print $2}')
PR_AUTHOR=$(gh api "/repos/$OWNER/$REPO/pulls/$PR_NUMBER" --jq '.user.login')

# 3a — Prior review present (self-review OR reviewer review OR bot inline)
SELF_REVIEW=$(gh api "/repos/$OWNER/$REPO/issues/$PR_NUMBER/comments" \
  --jq '[.[] | select(.body | test("ai-hero:self-review"))] | length')

OTHER_REVIEWS=$(gh api "/repos/$OWNER/$REPO/pulls/$PR_NUMBER/reviews" \
  --jq "[.[] | select(.user.login != \"$PR_AUTHOR\") | select(.state != \"PENDING\")] | length")

BOT_INLINE=$(gh api "/repos/$OWNER/$REPO/pulls/$PR_NUMBER/comments" \
  --jq "[.[] | select(.user.login != \"$PR_AUTHOR\") | select((.user.type == \"Bot\") or (.user.login | test(\"(coderabbit|greptile|copilot|sonarcloud|codeball)\"; \"i\")))] | length")

# 3b — No unresolved review threads (inline conversations)
UNRESOLVED=$(gh api graphql -f query='
  query($owner: String!, $repo: String!, $pr: Int!) {
    repository(owner: $owner, name: $repo) {
      pullRequest(number: $pr) {
        reviewThreads(first: 100) {
          nodes {
            isResolved
            isOutdated
            comments(first: 1) { nodes { path author { login } body } }
          }
        }
      }
    }
  }
' -f owner="$OWNER" -f repo="$REPO" -F pr=$PR_NUMBER \
  --jq '[.data.repository.pullRequest.reviewThreads.nodes[] | select(.isResolved == false) | select(.isOutdated == false)] | length')

# 3c — No active CHANGES_REQUESTED review left standing. A
# CHANGES_REQUESTED is "active" if it is the latest review from that
# reviewer and has not been dismissed. Use the GraphQL latestReviews
# field which returns the most recent review per author.
ACTIVE_CHANGES=$(gh api graphql -f query='
  query($owner: String!, $repo: String!, $pr: Int!) {
    repository(owner: $owner, name: $repo) {
      pullRequest(number: $pr) {
        latestReviews(first: 50) {
          nodes { state author { login } }
        }
      }
    }
  }
' -f owner="$OWNER" -f repo="$REPO" -F pr=$PR_NUMBER \
  --jq '[.data.repository.pullRequest.latestReviews.nodes[] | select(.state == "CHANGES_REQUESTED")] | length')

# 3d — No unanswered top-level reviewer questions. A top-level issue
# comment from a non-author with no later comment from the author is a
# question the author has not answered. We flag any such comment whose
# id is greater than the author's most recent comment id.
LAST_AUTHOR_COMMENT_ID=$(gh api "/repos/$OWNER/$REPO/issues/$PR_NUMBER/comments" \
  --jq "[.[] | select(.user.login == \"$PR_AUTHOR\")] | (last // {id: 0}) | .id")
UNANSWERED_QUESTIONS=$(gh api "/repos/$OWNER/$REPO/issues/$PR_NUMBER/comments" \
  --jq "[.[]
    | select(.user.login != \"$PR_AUTHOR\")
    | select((.user.type != \"Bot\") and ((.user.login | test(\"(coderabbit|greptile|copilot|sonarcloud|codeball|github-actions)\"; \"i\")) | not))
    | select(.id > ${LAST_AUTHOR_COMMENT_ID:-0})
  ] | length")

Show the user the gate result:

Pre-flight gates for PR #PR_NUMBER:
  Prior review present:       SELF_REVIEW self-review + OTHER_REVIEWS reviewer + BOT_INLINE bot
  Unresolved threads:         UNRESOLVED   (must be 0)
  Active CHANGES_REQUESTED:   ACTIVE_CHANGES (must be 0 — re-request review or push fixes)
  Unanswered reviewer Qs:     UNANSWERED_QUESTIONS (must be 0 — reply to each)

This is a hard gate, not a warning. Stop and refuse to post @auto-approve if any of the following:

(SELF_REVIEW + OTHER_REVIEWS + BOT_INLINE) == 0 — no prior review at all. Run hero-skills:review-pr.
UNRESOLVED > 0 — inline review threads still open. Run hero-skills:respond-to-comments to address them and resolve the threads.
ACTIVE_CHANGES > 0 — a reviewer's latest review still says CHANGES_REQUESTED. Address the change request, push fixes, then ask the reviewer to dismiss it or submit a fresh review (a subsequent APPROVED review supersedes it in latestReviews).
UNANSWERED_QUESTIONS > 0 — top-level questions from human reviewers with no author reply. List each one (gh api .../issues/$PR_NUMBER/comments --jq '.[] | select(.id > LAST_AUTHOR_COMMENT_ID) | {user: .user.login, body: .body[0:200], url: .html_url}') and tell the user to reply to each before re-running.

Show the offending items inline so the user can act:

Cannot run hero-skills:ship-pr yet. Address these first:

  Unresolved threads (3):
    - api/users.ts:42 — @reviewer: "Handle the null case here"
    - ...

  Active CHANGES_REQUESTED reviews (1):
    - @reviewer1 — push fixes and ask them to re-review or dismiss

  Unanswered reviewer questions (1):
    - @reviewer (PR_URL#issuecomment-12345): "Why not use the existing helper?"

Recommended next step: hero-skills:respond-to-comments

Do not proceed. Do not post @auto-approve.

Only when all four gates pass continue to Step 4.

Step 4: Post the @auto-approve Trigger Comment

Record the timestamp first so we can find the workflow run we just triggered without confusing it with prior runs.

TRIGGERED_AT=$(date -u +%Y-%m-%dT%H:%M:%SZ)
gh pr comment $PR_NUMBER --body "@auto-approve"

The workflow run is keyed off the issue_comment event, not a commit SHA. We capture TRIGGERED_AT so Step 5 can disambiguate this run from prior Auto Approve runs on the same PR.

Step 5: Wait for the Workflow Run

WF_ID=$(gh api "/repos/{owner}/{repo}/actions/workflows" \
  --jq '.workflows[] | select(.name == "Auto Approve") | .id' | head -1)

if [ -z "$WF_ID" ]; then
  echo "Auto Approve workflow not found in this repo. Did the workflow file land on the default branch yet?"
  exit 1
fi

RUN_ID=""
for i in 1 2 3 4 5 6 7 8 9 10; do
  RUN_JSON=$(gh api "/repos/{owner}/{repo}/actions/workflows/$WF_ID/runs?event=issue_comment&per_page=10" \
    --jq "[.workflow_runs[] | select(.created_at > \"$TRIGGERED_AT\")] | .[0]")
  if [ -n "$RUN_JSON" ] && [ "$RUN_JSON" != "null" ]; then
    RUN_ID=$(echo "$RUN_JSON" | jq -r '.id')
    break
  fi
  sleep 5
done

If no run appears within ~50 seconds, surface a clear error:

Could not find an Auto Approve workflow run for the @auto-approve comment.

Common causes:
  - auto-approve.yml is not on the default branch (re-check Step 2)
  - The ANTHROPIC_API_KEY repo secret is missing
  - GitHub Actions is disabled for this repo

Visit PR_URL/checks to investigate.

Stop here.

Once RUN_ID is found, poll until the run completes. The loop has a hard 5-minute timeout — without it, a hung workflow blocks indefinitely with no surfaced error:

WAIT_START=$SECONDS
while true; do
  if (( SECONDS - WAIT_START > 300 )); then
    RUN_URL=$(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.html_url')
    echo "Timed out waiting for run $RUN_ID after 5 minutes."
    echo "Visit $RUN_URL to check status manually, then ask the user whether to keep waiting or stop."
    break
  fi
  STATUS=$(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.status')
  CONCLUSION=$(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.conclusion')
  [ "$STATUS" = "completed" ] && break
  sleep 10
done

Step 6: Read the Verdict

# Latest auto-approve comment body — `// empty` collapses missing/null
# to an empty string instead of the literal "null".
COMMENT_BODY=$(gh api "/repos/{owner}/{repo}/issues/$PR_NUMBER/comments" \
  --jq '[.[] | select(.body | startswith("<!-- claude-approve -->"))] | (last // {}) | (.body // empty)')

# Most recent review submitted by github-actions[bot] (state only).
REVIEW_STATE=$(gh api "/repos/{owner}/{repo}/pulls/$PR_NUMBER/reviews" \
  --jq '[.[] | select(.user.login == "github-actions[bot]")] | (last // {}) | (.state // empty)')

if [ -z "$COMMENT_BODY" ] && [ -z "$REVIEW_STATE" ]; then
  echo "Workflow completed but posted neither a verdict comment nor a review."
  echo "Run conclusion: $CONCLUSION"
  echo "Run URL:        $(gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.html_url')"
  echo "Treating as WORKFLOW_FAILED — see logs for the failing step."
  VERDICT="WORKFLOW_FAILED"
elif [ "$REVIEW_STATE" = "APPROVED" ]; then
  VERDICT="APPROVE"
elif [ "$REVIEW_STATE" = "CHANGES_REQUESTED" ]; then
  VERDICT="REQUEST_CHANGES"
elif [ "$CONCLUSION" != "success" ]; then
  VERDICT="WORKFLOW_FAILED"
else
  # Comment exists but review state was unexpected — fail closed.
  VERDICT="REQUEST_CHANGES"
fi

Show the comment body to the user verbatim — it contains the gate results and Claude's per-check reasoning the user needs to act on.

Step 7: Act on the Verdict

Step 7a: APPROVE Path — Offer to Merge

# shellcheck source=/dev/null
. "${CLAUDE_PLUGIN_ROOT:-$HOME/.claude/plugins/hero-skills}/scripts/hero-lib.sh"
MERGE_METHOD_RAW=$(hero_field merge-method || true)
MERGE_METHOD=$(printf '%s' "${MERGE_METHOD_RAW:-squash}" \
  | tr -d '[:space:]' | tr -d '"' | tr -d "'" | tr '[:upper:]' '[:lower:]')

case "$MERGE_METHOD" in
  squash|rebase|merge) ;;
  *)
    echo "ERROR: HERO.md merge-method='$MERGE_METHOD_RAW' is not one of squash|rebase|merge."
    echo "Fix HERO.md or pass the method explicitly when merging. Aborting."
    exit 1
    ;;
esac
MERGE_FLAG="--$MERGE_METHOD"

gh pr view $PR_NUMBER --json mergeable,mergeStateStatus,reviewDecision,statusCheckRollup,headRefName

Then ask:

Auto-approve PASSED on PR #PR_NUMBER.

Mergeable:        MERGEABLE_VALUE
Merge state:      MERGE_STATE_STATUS
Review decision:  REVIEW_DECISION
Required checks:  SUMMARY (e.g. 5 passing, 0 failing)
Merge method:     MERGE_METHOD (from HERO.md)

Merge now? [y/N]
  y -> merge with MERGE_METHOD
  n -> stop here, I will merge manually

Wait for explicit confirmation. If the user says yes, attempt --auto first. If that fails, inspect the failure reason before deciding whether to retry without --auto:

gh pr merge $PR_NUMBER $MERGE_FLAG --auto 2> merge_err.log
RC=$?

if [ $RC -ne 0 ]; then
  if grep -qi "auto.merge.*not.*enabled\|auto-merge is not allowed" merge_err.log; then
    # Repo has auto-merge disabled — fall back to immediate merge with
    # the same method. This is safe: branch protection still applies.
    gh pr merge $PR_NUMBER $MERGE_FLAG
  else
    # Branch protection, missing checks, conflicts, permissions — surface
    # the error and stop. Do NOT retry without --auto, because that path
    # bypasses the wait-for-checks safety net.
    cat merge_err.log
    echo "Merge failed. Resolve the underlying issue and re-run hero-skills:ship-pr, or merge manually."
    exit 1
  fi
fi

Step 7b: Reset to the Default Branch (the merged-branch counterpart to `hero-skills:abandon`)

If Step 1 skipped straight here, $OWNER/$REPO were never set (only Step 3 sets them):

if [ -z "$OWNER" ] || [ -z "$REPO" ]; then
  OWNER_REPO=$(gh repo view --json owner,name --jq '"\(.owner.login) \(.name)"')
  OWNER=$(echo "$OWNER_REPO" | awk '{print $1}')
  REPO=$(echo "$OWNER_REPO" | awk '{print $2}')
fi

Order matters:

Confirm the merge actually landed.
Switch to BASE_BRANCH before deleting the head branch locally — git branch -d fails if you are on the branch you want to delete.
Pull BASE_BRANCH so the local copy includes the squash/merge commit.
Delete the remote head branch (unless GitHub auto-delete or HERO.md disables it).
Delete the local head branch with -d (refuses unmerged history — that is a feature). If -d refuses, fall back to -D only when the local branch tip is confirmed to be exactly the PR's merged head (via headRefOid) — never on MERGED=true alone, since that only proves the PR merged, not that the local branch has no commits beyond it.
Offer to clean up other stale merged local branches.
Suggest /clear so the next task starts on a fresh context.

Wrap the whole block in an if so an early return cannot kill the wrapping shell, and surface real errors instead of speculating about their cause.

sleep 3
# `--json merged` isn't a valid gh CLI field (gh 2.86.0 rejects unknown
# --json names locally, before any API call) — derive from `state`. Also
# check gh's own exit status: an auth/network failure here must not read
# as "not merged yet" (both would otherwise leave MERGED empty).
if ! MERGED=$(gh pr view $PR_NUMBER --json state --jq 'if .state == "MERGED" then "true" else "false" end' 2>/tmp/ship_pr_merge_check_err.log); then
  echo "WARN: could not check merge status via 'gh pr view' — see error below."
  cat /tmp/ship_pr_merge_check_err.log
  echo "Resolve (check 'gh auth status' / network) and re-run 'hero-skills:ship-pr' to retry."
  MERGED=false
fi
rm -f /tmp/ship_pr_merge_check_err.log
RESET_OK=true   # cleared if any sync step (checkout/pull/fetch) fails. Gates
                # the cleanup steps below — never delete branches based on a
                # stale local view of $BASE_BRANCH.

if [ "$MERGED" != "true" ]; then
  echo "Merge not yet recorded — skipping branch reset."
else
  # 1. Switch to BASE_BRANCH first if we are still on the merged head.
  #    Hard-failing checkout post-merge would leave the user stuck on the
  #    merged head with no recovery path. Instead, surface the state, set
  #    RESET_OK=false, and let the user finish the reset manually.
  CURRENT=$(git branch --show-current)
  if [ "$CURRENT" = "$PR_BRANCH" ]; then
    echo "Switching from $PR_BRANCH to $BASE_BRANCH..."
    if ! git checkout "$BASE_BRANCH"; then
      RESET_OK=false
      echo ""
      echo "Could not checkout $BASE_BRANCH. The merge already landed remotely,"
      echo "but you are still on $PR_BRANCH locally."
      echo ""
      echo "Likely causes:"
      echo "  - Uncommitted local edits — check 'git status'"
      echo "  - The local $BASE_BRANCH ref is divergent or missing"
      echo ""
      echo "Resolve manually, then re-run 'hero-skills:ship-pr' to retry."
      echo "Skipping branch deletion + stale-cleanup so we do not act on a"
      echo "stale local view of $BASE_BRANCH."
    fi
  elif [ "$CURRENT" != "$BASE_BRANCH" ]; then
    # User happens to be on a third branch. Leave them there, but flag
    # that this skill is NOT refreshing $BASE_BRANCH locally — otherwise the
    # next task starts from a stale base.
    echo "You are on '$CURRENT', neither '$PR_BRANCH' nor '$BASE_BRANCH'."
    echo "Leaving you here. Note: this skill is NOT pulling $BASE_BRANCH —"
    echo "run 'git fetch origin $BASE_BRANCH' yourself before branching off it."
    RESET_OK=false   # cannot safely run cleanup against a possibly-stale ref
  fi

  # 2. Pull latest into BASE_BRANCH (only if we ended up on it AND the
  #    checkout above succeeded). A non-fast-forward pull means the local
  #    BASE_BRANCH is divergent from origin — a subsequent
  #    "git branch --merged origin/BASE_BRANCH" would judge against a stale
  #    ref, so we fail closed and skip the deletion + cleanup steps.
  CURRENT=$(git branch --show-current)
  if [ "$RESET_OK" = "true" ] && [ "$CURRENT" = "$BASE_BRANCH" ]; then
    if ! git pull --ff-only origin "$BASE_BRANCH"; then
      RESET_OK=false
      echo ""
      echo "WARN: 'git pull --ff-only origin $BASE_BRANCH' failed."
      echo "      The local $BASE_BRANCH is divergent from origin. Skipping"
      echo "      branch deletion and stale-branch cleanup to avoid acting"
      echo "      on a stale reference. Resolve with:"
      echo "        git status; git fetch origin $BASE_BRANCH"
      echo "      then re-run 'hero-skills:ship-pr' to retry."
    fi
  fi
fi

# 3. Remote head-branch cleanup — only when sync succeeded.
if [ "$RESET_OK" = "true" ] && [ "$MERGED" = "true" ]; then
  # Treat null/empty deleteBranchOnMerge as unknown and defer to HERO.md.
  # Non-admins may not see this field.
  AUTO_DELETE=$(gh repo view --json deleteBranchOnMerge --jq '.deleteBranchOnMerge // empty' 2>/dev/null)

  HERO_AUTO_DELETE=$(hero_field auto-delete-branches 2>/dev/null | tr '[:upper:]' '[:lower:]')
  HERO_AUTO_DELETE=${HERO_AUTO_DELETE:-true}

  if [ "$AUTO_DELETE" = "true" ]; then
    # By the time we reach this branch the merge has already happened and
    # GitHub has already deleted the remote ref. Past-tense, not future.
    echo "GitHub auto-deleted $PR_BRANCH on merge (repo deleteBranchOnMerge=true)."
  elif [ "$HERO_AUTO_DELETE" != "true" ]; then
    echo "Skipping remote branch cleanup (HERO.md auto-delete-branches=$HERO_AUTO_DELETE)."
  else
    # Distinguish 404/422 ("already gone — fine") from 401/403 ("permission
    # denied — surface, do not silently mask").
    DELETE_STATUS=$(gh api -X DELETE "/repos/$OWNER/$REPO/git/refs/heads/$PR_BRANCH" \
      -i 2>/dev/null | awk 'NR==1 {print $2; exit}')
    case "$DELETE_STATUS" in
      204|200)        echo "Deleted remote branch: $PR_BRANCH" ;;
      404|422)        echo "Remote branch $PR_BRANCH already gone." ;;
      401|403)        echo "WARN: cannot delete remote $PR_BRANCH — permission denied (HTTP $DELETE_STATUS). Delete it manually if needed." ;;
      *)              echo "WARN: remote delete returned HTTP ${DELETE_STATUS:-error}. Re-check $PR_URL and remove the branch manually if needed." ;;
    esac
  fi

  # 4. Local head-branch cleanup. We're on BASE_BRANCH now. Check the actual
  #    exit status, not stderr emptiness — `git branch -d` can print a
  #    non-fatal "not yet merged to HEAD" warning on a *successful* delete
  #    (squash/rebase merges break linear ancestry, but an upstream-tracking
  #    ref still shows it merged) — stderr-emptiness would misreport that as
  #    a failure.
  CURRENT=$(git branch --show-current)
  if [ "$CURRENT" = "$PR_BRANCH" ]; then
    # Should not happen — checkout above handled it. Skip defensively.
    echo "Still on $PR_BRANCH after checkout attempt. Skipping local delete."
  elif git show-ref --verify --quiet "refs/heads/$PR_BRANCH"; then
    if git branch -d "$PR_BRANCH" 2>&1; then
      echo "Deleted local branch: $PR_BRANCH"
    else
      # MERGED=true only proves the PR merged, not that the local tip has no
      # commits beyond it (a forgotten local commit, an amend). Verify the
      # local tip IS the merged PR head before force-deleting.
      PR_HEAD_SHA=$(gh pr view $PR_NUMBER --json headRefOid --jq '.headRefOid' 2>/dev/null)
      LOCAL_SHA=$(git rev-parse "$PR_BRANCH" 2>/dev/null)
      if [ -n "$PR_HEAD_SHA" ] && [ "$LOCAL_SHA" = "$PR_HEAD_SHA" ]; then
        if git branch -D "$PR_BRANCH" 2>&1; then
          echo "Deleted local branch: $PR_BRANCH (forced — local tip matched the merged PR head $PR_HEAD_SHA)"
        else
          echo "WARN: could not delete local $PR_BRANCH even with -D. Investigate manually."
        fi
      else
        echo "WARN: local $PR_BRANCH ($LOCAL_SHA) does not match the merged PR head ($PR_HEAD_SHA)."
        echo "  It may have local-only commits that were never part of the merged PR — not force-deleting."
        echo "  Investigate; delete manually with 'git branch -D $PR_BRANCH' only if you're sure."
      fi
    fi
  fi

  # 5. Offer to clean up other merged-but-stale local branches. Distinguish
  #    "no stale branches" from "cannot check" — a missing
  #    refs/remotes/origin/$BASE_BRANCH means git branch --merged returns
  #    nothing, which would silently look identical to "all clean".
  if ! git show-ref --verify --quiet "refs/remotes/origin/$BASE_BRANCH"; then
    echo ""
    echo "Skipping stale-branch cleanup: refs/remotes/origin/$BASE_BRANCH is"
    echo "missing locally. Run 'git fetch origin' and re-check yourself."
  elif ! git fetch --prune origin >/dev/null 2>&1; then
    echo ""
    echo "Skipping stale-branch cleanup: 'git fetch --prune origin' failed."
    echo "Resolve manually before deleting any branches."
  else
    STALE=$(git branch --merged "origin/$BASE_BRANCH" \
      | grep -vE '^\*' \
      | grep -vE "^[[:space:]]*${BASE_BRANCH}$" \
      | sed 's/^[[:space:]]*//' \
      | grep -v '^$' \
      | grep -v "^$PR_BRANCH$" || true)

    if [ -n "$STALE" ]; then
      echo ""
      echo "Other local branches fully merged into $BASE_BRANCH (candidates for cleanup):"
      echo "$STALE" | sed 's/^/  - /'
      echo ""
      echo "Delete them now? [y/N]"
    fi
  fi
fi

# 6. Tidy up the merge-error tempfile from Step 7a regardless of success.
rm -f merge_err.log

If the user confirms the cleanup prompt above, run git branch -d BRANCH_NAME for each listed branch. Do NOT use -D — refuse to force-delete.

Step 7c: REQUEST_CHANGES Path — Surface and Offer Next Steps

Show the verdict comment, then ask:

Auto-approve REQUESTED CHANGES on PR #PR_NUMBER.

(reasons from the verdict comment)

What would you like to do?
  1. hero-skills:respond-to-comments  -> address the unresolved comments and re-run
  2. Re-trigger @auto-approve once I have addressed the items above
  3. Stop here

Step 7d: WORKFLOW_FAILED Path

Surface the run URL and the failing step:

gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID" --jq '.html_url'
gh api "/repos/{owner}/{repo}/actions/runs/$RUN_ID/jobs" \
  --jq '.jobs[].steps[] | select(.conclusion == "failure") | {name, conclusion, number}'

Suggest the most likely fixes (missing ANTHROPIC_API_KEY, GitHub token permissions, repo secrets disabled). Do not retry automatically.

Step 7e: Verify Deployment Health (post-merge)

This check is advisory only. It surfaces a DEGRADED or unreachable deployment loudly so the user can act, but it never un-merges, reverts, or blocks anything that already landed in Step 7a.

if [ "$MERGED" != "true" ]; then
  DEPLOY_STATUS="skipped"
else
  DEPLOY_PLATFORM=$(hero_field platform 2>/dev/null | tr '[:upper:]' '[:lower:]')
  DEPLOY_PLATFORM=${DEPLOY_PLATFORM:-none}
fi

Dispatch on $DEPLOY_PLATFORM:

kubernetes — read-only cluster health (nodes, pods, deployments, optional ArgoCD):

kubectl config current-context
kubectl cluster-info --request-timeout=5s

If the connection fails, report Deployment: skipped (kubectl unreachable) and stop here — an unreachable cluster is not the same as a DEGRADED one.

# A failed query must never be mistaken for "all healthy": empty output means
# healthy ONLY when the query itself succeeded. Capture each command's exit
# status and set CHECK_FAILED on any failure. `set -o pipefail` so a kubectl
# failure piped into jq is not masked by jq's own exit code.
set -o pipefail
CHECK_FAILED=false

# Nodes — Ready/NotReady and pressure conditions
kubectl get nodes -o jsonpath='{range .items[*]}{.metadata.name}{"\t"}{range .status.conditions[*]}{.type}={.status}{"\t"}{end}{"\n"}{end}' || CHECK_FAILED=true

# Pods — anything not Running/Succeeded, plus crashloops
PODS_OUT=$(kubectl get pods --all-namespaces --field-selector=status.phase!=Running,status.phase!=Succeeded -o wide 2>&1) \
  && printf '%s\n' "$PODS_OUT" \
  || { echo "WARN: pod-status query failed: $PODS_OUT"; CHECK_FAILED=true; }
kubectl get pods --all-namespaces -o json \
  | jq -r '.items[] | select(.status.containerStatuses[]?.restartCount > 5) | "\(.metadata.namespace)/\(.metadata.name) restarts=\(.status.containerStatuses[0].restartCount)"' \
  || CHECK_FAILED=true

# Deployments — ready vs desired replica counts
kubectl get deployments --all-namespaces -o json \
  | jq -r '.items[] | select(.status.readyReplicas != .status.replicas) | "\(.metadata.namespace)/\(.metadata.name) ready=\(.status.readyReplicas // 0)/\(.status.replicas)"' \
  || CHECK_FAILED=true

If HERO.md flags ArgoCD for this deployment, also check sync/health:

# Try the argocd CLI; fall back to kubectl. If BOTH fail, ArgoCD state is
# unknown — record that rather than treating empty output as "all Synced".
if ! argocd app list -o json 2>/dev/null \
     | jq -r '.[] | "\(.metadata.name)\t\(.status.sync.status)\t\(.status.health.status)"'; then
  if ! kubectl get applications -n argocd -o json 2>/dev/null \
       | jq -r '.items[] | "\(.metadata.name)\tsync=\(.status.sync.status)\thealth=\(.status.health.status)"'; then
    echo "WARN: could not query ArgoCD via the argocd CLI or kubectl."
    CHECK_FAILED=true
  fi
fi

Classify in this order:

UNKNOWN (could not verify) when CHECK_FAILED is true — a health query itself failed (RBAC denial, missing argocd binary, apiserver error, expired token). This is not the same as healthy; report it as could not verify deployment health so the user investigates rather than trusting a false green.
Otherwise HEALTHY (all nodes Ready, no crashlooping/pending pods, all deployments at desired replica count, ArgoCD Synced/Healthy where checked) vs DEGRADED (any NotReady node, any crashlooping/pending pod, any under-replica'd deployment, or ArgoCD OutOfSync/Degraded/Missing).

# hero_field returns only the FIRST match; health-endpoint legitimately repeats,
# so this list is read directly.
HEALTH_ENDPOINTS=$(awk -F': ' '/^- health-endpoint:/ {print $2}' "$ROOT/HERO.md" 2>/dev/null `# hero-lint: allow-inline` \
  | tr -d '"' | tr -d "'")

if [ -z "$HEALTH_ENDPOINTS" ]; then
  echo "No health endpoint configured for $DEPLOY_PLATFORM — skipping."
  DEPLOY_STATUS="skipped"
else
  DEPLOY_STATUS="HEALTHY"
  # Here-string (not `... | while`): a pipeline runs the loop in a subshell,
  # so DEPLOY_STATUS assignments inside it would be discarded. curl emits 000
  # on timeout/unreachable, which the non-2xx branch correctly treats as
  # DEGRADED.
  while read -r URL; do
    [ -z "$URL" ] && continue
    CODE=$(curl -s -o /dev/null -w '%{http_code}' --max-time 5 "$URL")
    echo "$URL -> HTTP $CODE"
    case "$CODE" in
      2??) ;;                          # 2xx — healthy
      *)   DEPLOY_STATUS="DEGRADED" ;; # non-2xx or 000 (timeout/unreachable)
    esac
  done <<< "$HEALTH_ENDPOINTS"
fi

none or missing — skip silently; render (–) for this phase in the DAG and Summary.

Step 8: Summary

Render the Pipeline DAG line conditionally on the verdict, whether the user merged, and the deployment-health result. Use the marker semantics from PIPELINES.md:

APPROVE + merged + reset succeeded + deploy healthy → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (✓) verify-deploy
APPROVE + merged + reset succeeded + deploy DEGRADED → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (✗) verify-deploy
APPROVE + merged + reset succeeded + deploy UNKNOWN (a health query failed) → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (✗) verify-deploy with a could not verify deployment health note (distinct from DEGRADED — the deployment may be fine; the check couldn't confirm it)
APPROVE + merged + reset succeeded + no platform configured (skipped) → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✓) reset → (–) verify-deploy
APPROVE + merged + reset partial (RESET_OK=false) → (✓) gates → (✓) trigger → (✓) verdict → (✓) merge → (✗) reset → (✓|✗|–) verify-deploy — verify-deploy still runs off MERGED == true, independent of the reset outcome
APPROVE + user declined merge → (✓) gates → (✓) trigger → (✓) verdict → (✗) merge → ( ) reset → ( ) verify-deploy with Stopped: user declined merge
REQUEST_CHANGES → (✓) gates → (✓) trigger → (✓) verdict → (✗) merge → ( ) reset → ( ) verify-deploy with Stopped: REQUEST_CHANGES
WORKFLOW_FAILED → (✓) gates → (✓) trigger → (✗) verdict → ( ) merge → ( ) reset → ( ) verify-deploy with Stopped: WORKFLOW_FAILED

Ship Summary
=========================
PR:        #PR_NUMBER - PR_TITLE
Branch:    PR_BRANCH -> BASE_BRANCH

Pipeline:  (CONDITIONAL_DAG_LINE_FROM_ABOVE)

Verdict:   APPROVE | REQUEST_CHANGES | WORKFLOW_FAILED
Run:       RUN_URL

Deployment: HEALTHY | DEGRADED | UNKNOWN | skipped

Action taken:
  - Merged with MERGE_METHOD (sha SHORT_SHA)            # APPROVE + user said yes
  - Reset: switched to BASE_BRANCH, pulled, deleted PR_BRANCH (remote+local)
  - Stale-branch cleanup: deleted N | offered N | none found | skipped (sync failed)
  - Left for manual merge                                # APPROVE + user said no
  - Suggested hero-skills:respond-to-comments             # REQUEST_CHANGES
  - Stopped, action failure surfaced                     # WORKFLOW_FAILED

Next step: (one only — omit for REQUEST_CHANGES/WORKFLOW_FAILED, already covered by 7c/7d)

Merged → /clear — plain suggestion, not Skill-tool invocable, no y/N offer.
Abandoning mid-flight → hero-skills:abandon — restricted, print only.

Skip hero-skills:one-shot; it's not the deterministic next action.

Notes

The workflow's gates (prior review present, all threads resolved) run before Claude is invoked. A failed gate is the cheap path; do not assume Claude is wrong if the verdict comes back fast.
Auto-approve is one signal among many. Branch protection, CODEOWNERS, and required status checks still apply — gh pr merge will fail loudly if any of those block the merge, and that is the correct behavior.
Re-running @auto-approve is safe. The workflow updates the same comment and submits a fresh review, so the PR history shows the latest verdict without duplicates.
Never use --admin to bypass branch protection during merge, even if the user asks. Stop and let them merge manually if protection blocks.

ship-pr

More from this repository

More from this repository

Ship — Trigger Auto-Approve, Merge, Reset Local Branch

Pipeline DAG

Arguments

Prerequisites

Instructions

Step 0: Load Hero Configuration

Step 1: Identify the PR

Step 2: Verify Auto-Approve Workflow Is on the Default Branch

Step 3: Hard Gate — All Comments and Reviews Must Be Answered

Step 4: Post the @auto-approve Trigger Comment

Step 5: Wait for the Workflow Run

Step 6: Read the Verdict

Step 7: Act on the Verdict

Step 7a: APPROVE Path — Offer to Merge

Step 7b: Reset to the Default Branch (the merged-branch counterpart to hero-skills:abandon)

Step 7c: REQUEST_CHANGES Path — Surface and Offer Next Steps

Step 7d: WORKFLOW_FAILED Path

Step 7e: Verify Deployment Health (post-merge)

Step 8: Summary

Notes

Ship — Trigger Auto-Approve, Merge, Reset Local Branch

Pipeline DAG

Arguments

Prerequisites

Instructions

Step 0: Load Hero Configuration

Step 1: Identify the PR

Step 2: Verify Auto-Approve Workflow Is on the Default Branch

Step 3: Hard Gate — All Comments and Reviews Must Be Answered

Step 4: Post the @auto-approve Trigger Comment

Step 5: Wait for the Workflow Run

Step 6: Read the Verdict

Step 7: Act on the Verdict

Step 7a: APPROVE Path — Offer to Merge

Step 7b: Reset to the Default Branch (the merged-branch counterpart to hero-skills:abandon)

Step 7c: REQUEST_CHANGES Path — Surface and Offer Next Steps

Step 7d: WORKFLOW_FAILED Path

Step 7e: Verify Deployment Health (post-merge)

Step 8: Summary

Notes

Step 7b: Reset to the Default Branch (the merged-branch counterpart to `hero-skills:abandon`)

Step 7b: Reset to the Default Branch (the merged-branch counterpart to `hero-skills:abandon`)