plancraft

name

plancraft

description

Plan-first development workflow. Enforces Research → Plan → Annotate → Implement phases with human-in-the-loop review gates. Never write code until the plan is approved. Use for any non-trivial feature, refactor, or bug investigation. Triggers on: research, plan, annotate, todo, implement, resume, status, team-based implementation, multi-agent coordination, code review workflow, plan-first development.

Plancraft — Plan-First Development Workflow

Core principle: Never write code until you've produced a written plan and the human has reviewed and approved it.

When to Use

Use when: changes span >1 file, estimated work is >30 minutes, architectural decisions are involved, you're unfamiliar with the subsystem, the change has downstream dependencies, or bug root cause is unclear.

Skip when: one-line fix, typo/formatting, adding a simple test, config changes with no logic.

---

The Flow

Research → Plan → Annotate (1-6x) → Todo → Implement → Feedback
                                              ↑
                                          Resume (if session interrupted)

Each phase produces a persistent markdown artifact. Never give verbal summaries — always write to files.

Artifact Location

.plancraft/
├── research.md
├── plan.md
└── references/       # optional: reference implementations

Add .plancraft/ to .gitignore if artifacts shouldn't be committed.

Definition of Done

Every task must meet ALL criteria before it can pass verification:

Minimum Bar (non-negotiable):

• Tests pass (existing + new where applicable)
• No regressions introduced
• Follows codebase conventions
• Plan adherence — implements exactly what was specified

Quality Bar (required for task approval):

• Code is clean — no dead code, no commented-out blocks, no TODOs left behind
• Edge cases from research.md are handled
• Error paths are covered, not just happy paths
• Changes are minimal — no unnecessary refactoring beyond the plan

Both qa-verifier and product-manager use this as their rubric.

---

Phase 1: Research

Trigger: plancraft research or starting any non-trivial task.

1. Read the target code deeply — implementations, edge cases, patterns
2. Understand dependencies, data flow, existing conventions
3. Write everything to research.md

research.md must include:

• Architecture overview of the relevant subsystem
• Key files and their responsibilities
• Data flow and state management patterns
• Existing conventions (naming, patterns, libraries used)
• Potential gotchas, edge cases, or fragile areas
• Dependencies that could be affected by changes

⛔ PHASE GATE: Stop here.

"Research complete. Written to research.md. Please review before I proceed to planning."

---

Phase 2: Plan

Trigger: Human approves research, or plancraft plan.

Produce a detailed implementation plan in plan.md. Use the template from references/plan-template.md.

Key rules:

• Base the plan on actual codebase — read source files before suggesting changes
• Include code snippets showing the real changes, not pseudocode
• Reference existing patterns in the codebase
• Populate the Team Roles section — identify specialist roles needed, with justification. Only propose roles the plan actually requires
• Fill in Non-Functional Requirements if applicable (performance, security, accessibility)

⛔ PHASE GATE: Stop here.

"Plan written to plan.md. Please review and add any inline annotations before I proceed."

---

Phase 3: Annotation Cycle

Trigger: Human says they've added notes, or plancraft annotate.

Human adds inline notes using > **[NOTE]:** prefix. Annotation types:

Prefix	Meaning
[NOTE]	General feedback
[REJECT]	Remove this section
[CONSTRAINT]	Hard rule, don't change
[QUESTION]	Agent should answer

Address ALL annotations. Move resolved notes to the Resolved Annotations section. Never jump to code during annotation.

⛔ PHASE GATE: After each round, stop and ask:

"All notes addressed. Plan updated. [N] annotations resolved. Ready for another review or shall I proceed to the todo list?"

---

Phase 4: Todo List

Trigger: Human approves the plan, or plancraft todo.

Add a granular checklist to the Todo section of plan.md:

## Todo
### Phase 1: [Name]
- [ ] Task 1 — specific, actionable description
- [ ] Task 2
- [ ] ✅ Validate: run typecheck

### Phase 2: [Name]
- [ ] Task 3
- [ ] ✅ Validate: run tests

Rules:

• Tasks should be small enough to verify individually
• Order tasks by dependency
• Include validation checkpoints (✅)
• Update the Team Roles table — fill in "Assigned Tasks" column

⛔ PHASE GATE: Stop here.

"Todo list added to plan.md — [N] tasks across [M] phases. Review the breakdown and approve to start implementation."

---

Phase 5: Implementation

Trigger: Human approves todo list, or plancraft implement.

Goal: Execute the plan mechanically. No creative decisions — those were made in planning.

Pre-Flight Check (MUST run before any implementation)

Before writing any code, execute this checklist in order:

1. Read plan.md Team Roles table — does the plan define team roles?
2. Check Agent tool availability — can you spawn agents?
3. Decision:
   • If Team Roles exist AND Agent tool is available → MUST use Team-Based Implementation below. No exceptions.
   • If Team Roles exist but Agent tool is unavailable → Solo fallback (log why agents were unavailable)
   • If no Team Roles defined AND fewer than 3 todo items → Solo implementation

⛔ HARD RULE: Never skip this check. Never implement solo when the plan has Team Roles and the Agent tool is available. This is the #1 most common mistake — defaulting to solo because it's easier. Always spin up the team.

git checkout -b plancraft/<feature-name>

Team-Based Implementation (Default — Required when plan has Team Roles)

See references/team-workflow.md for the full team workflow including:

• Role spawning from approved plan.md Team Roles
• Task graph validation
• Staggered agent spawning (QA/PM spawn when work is ready)
• Two-stage verify-iterate loop (qa-verifier → product-manager)
• Iteration budget (max 3 cycles), regression protocol, communication protocol
• Escalation triggers and deadlock detection

See references/prompt-templates.md for developer, qa-verifier, and product-manager prompt templates.

Feedback during implementation:

The human's role shifts to supervisor. Expect terse corrections:

• "You missed the deduplication function"
• "This should be in the admin app, not the main app — move it"
• "this table should look exactly like the users table"

When things go wrong:

git checkout .  # Revert to clean state

Never patch a bad approach. Revert and re-scope.

After completion:

1. Final integration check — run the full test suite against the complete changeset
2. Complete retrospective (mandatory for team implementation) — see Phase 5.5
3. Review discovered knowledge — decide with the human what to persist to project docs
4. Commit — stage specific files (avoid git add -A)
5. Artifact cleanup — ask the human about plan.md and research.md disposition

---

Phase 5.5: Retrospective (Post-Implementation)

Trigger: All tasks approved, before final commit. Mandatory for team-based implementation.

Write to the Retrospective section of plan.md:

• Tasks completed, fix iterations required, tasks requiring >2 iterations
• What worked, what didn't work
• Actionable lessons for future sessions

If recurring patterns emerge, suggest updates to the project's CLAUDE.md or documentation.

---

Phase 6: Resume

Trigger: plancraft resume — after context compaction, session restart, or agent handoff.

1. Read plan.md — understand objective, approach, all changes
2. Check the Todo section — identify completed ([x]) and remaining ([ ]) tasks
3. Read research.md if remaining tasks need context
4. Check git diff and git log for what's already implemented
5. Report status and continue

---

Phase 7: Status Check

Trigger: plancraft status at any time.

## Plancraft Status
**Phase:** Implementation (Phase 5)
**Branch:** plancraft/feature-name
**Progress:** 7/12 tasks complete (58%)

### Completed:
- [x] Task 1 — description

### Remaining:
- [ ] Task 8 — description

### Blockers:
- None / [describe issue]

---

Quick Reference

Command	What it does
plancraft research	Deep-read codebase, write research.md
plancraft plan	Write implementation plan to plan.md
plancraft annotate	Address inline notes in plan.md
plancraft todo	Add granular task checklist to plan.md
plancraft implement	Execute plan on feature branch
plancraft resume	Recover context from plan.md
plancraft status	Show current phase and progress

---

Anti-Patterns

• Skip research → you'll miss conventions and break things
• Verbal plans → no review surface, decisions get lost
• Jump to code → wasted effort, wrong assumptions
• Ignore annotations → trust breakdown
• Patch bad approaches → revert and re-scope instead
• Add features not in the plan → scope creep
• Rely on chat context → plan.md is the truth
• Implement solo when agents are available → always use team-based implementation when the Agent tool is available and the plan has team roles