onec-protocol-tool-setup

name	onec-protocol-tool-setup
description	Set up and verify tooling for capturing and decoding 1C RAC/admin protocol traffic (proxy/capture, decode, and dependencies). Use when tooling is missing, capture pipeline fails, logs are empty, decode drift occurs, or the environment prerequisites are unknown.

Onec Protocol Tool Setup

Overview

Verify that the capture pipeline and decode tools are installed, reachable, and producing usable streams before deeper protocol work.

Workflow

1. Read references/tooling_checklist.md and run the pre-flight checks.
2. Confirm ports/paths:
   • LISTEN_ADDR is free.
   • ./logs/ and ./artifacts/rac/ are writable.
3. Run a control capture:
   • One known command with expected output.
   • Confirm streams exist and rac_decode parses them.
4. If any step fails, use the troubleshooting section in the checklist and report the exact failing command/output.

Output Requirements

When reporting setup results:

1. List tools verified and missing.
2. Provide the exact command(s) used for the control capture.
3. State whether rac_decode parsed both directions.
4. If blocked, list the smallest next action needed to proceed.