Run any Skill in Manus with one click

swpilotcli-feature-chamfer-circular-hole

Stars23

Forks2

UpdatedApril 30, 2026 at 03:46

Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part. Targets full circular edges by diameter and can optionally limit selection to the nearest matching edge to a supplied world coordinate. Use for chamfering drilled/cut hole openings such as 0.5 C x 45 deg center-hole chamfers.

Installation

Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.

Run Skill in Manus

Source

arthurle3210

arthurle3210/SwpilotCLI

View GitHub Repository View Creator Repositories

Download

Run Skill in Manus

Related occupationsSOC

Based on SOC occupation classification

Software DevelopersComputer and Mathematical Occupations·SOC 15-1252

File Explorer

4 files

SKILL.md

readonly

name	swpilotcli-feature-chamfer-circular-hole
description	Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part. Targets full circular edges by diameter and can optionally limit selection to the nearest matching edge to a supplied world coordinate. Use for chamfering drilled/cut hole openings such as 0.5 C x 45 deg center-hole chamfers.

swpilotcli-feature-chamfer-circular-hole

Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part.

Prerequisites

SolidWorks is running with an active Part document
The target hole already exists as circular edge geometry

Usage

dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj -- [diameter_mm] [chamfer_mm] [angle_deg] [nearest_x,nearest_y,nearest_z]

Arguments

Arg	Description
`diameter_mm`	Target hole diameter in millimetres. Default: `10`
`chamfer_mm`	Chamfer distance in millimetres. Default: `0.5`
`angle_deg`	Chamfer angle in degrees. Default: `45`
`nearest_x,nearest_y,nearest_z`	Optional world coordinate in millimetres. If supplied, only the nearest matching circular edge is chamfered.

Examples

# Apply 0.5 C x 45 deg chamfer to all 10 mm circular hole openings
dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj

# Apply to the matching circular edge nearest the top center of a 40 x 40 x 10 block
dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj -- 10 0.5 45 20,20,10

How it works

Traverses visible solid bodies in the active part
Finds full circular edges matching the requested diameter
Optionally keeps only the matching edge nearest the supplied world coordinate
Selects the target edge(s)
Calls FeatureChamferType with swChamferAngleDistance
Rebuilds and redraws the model

Notes

Without nearest_x,nearest_y,nearest_z, every matching full circular edge is chamfered.
Use the coordinate option when the part has multiple holes of the same diameter.

More from this repository

same repository

swpilotcli-active-doc-info

arthurle3210/SwpilotCLI

Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.

2026-04-3023

swpilotcli-eye-screenshot

arthurle3210/SwpilotCLI

YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.

2026-04-3023

swpilotcli-actiongroup-replace-notes

arthurle3210/SwpilotCLI

"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.

2026-04-3023

swpilotcli-batch-xt-to-step

arthurle3210/SwpilotCLI

Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.

2026-04-3023

swpilotcli-check-dangling-dims

arthurle3210/SwpilotCLI

Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

2026-04-3023

swpilotcli-close-doc

arthurle3210/SwpilotCLI

Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.

2026-04-3023

name	swpilotcli-feature-chamfer-circular-hole
description	Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part. Targets full circular edges by diameter and can optionally limit selection to the nearest matching edge to a supplied world coordinate. Use for chamfering drilled/cut hole openings such as 0.5 C x 45 deg center-hole chamfers.

swpilotcli-feature-chamfer-circular-hole

Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part.

Prerequisites

SolidWorks is running with an active Part document
The target hole already exists as circular edge geometry

Usage

dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj -- [diameter_mm] [chamfer_mm] [angle_deg] [nearest_x,nearest_y,nearest_z]

Arguments

Arg	Description
`diameter_mm`	Target hole diameter in millimetres. Default: `10`
`chamfer_mm`	Chamfer distance in millimetres. Default: `0.5`
`angle_deg`	Chamfer angle in degrees. Default: `45`
`nearest_x,nearest_y,nearest_z`	Optional world coordinate in millimetres. If supplied, only the nearest matching circular edge is chamfered.

Examples

# Apply 0.5 C x 45 deg chamfer to all 10 mm circular hole openings
dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj

# Apply to the matching circular edge nearest the top center of a 40 x 40 x 10 block
dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj -- 10 0.5 45 20,20,10

How it works

Traverses visible solid bodies in the active part
Finds full circular edges matching the requested diameter
Optionally keeps only the matching edge nearest the supplied world coordinate
Selects the target edge(s)
Calls FeatureChamferType with swChamferAngleDistance
Rebuilds and redraws the model

Notes

Without nearest_x,nearest_y,nearest_z, every matching full circular edge is chamfered.
Use the coordinate option when the part has multiple holes of the same diameter.