Identifies and unpacks UPX-packed and other packed malware samples to expose the original executable code for static analysis. Covers both standard UPX unpacking and handling modified UPX headers that prevent automated decompression. Activates for requests involving malware unpacking, UPX decompression, packer removal, or preparing packed samples for analysis.
Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.
A direct command skips the review prompt. Inspect the source before running it.
Identifies and unpacks UPX-packed and other packed malware samples to expose the original executable code for static analysis. Covers both standard UPX unpacking and handling modified UPX headers that prevent automated decompression. Activates for requests involving malware unpacking, UPX decompression, packer removal, or preparing packed samples for analysis.
Static analysis reveals high entropy sections and minimal imports indicating the binary is packed
PEiD, Detect It Easy, or PEStudio identifies UPX or another known packer
The import table contains only LoadLibrary and GetProcAddress (runtime import resolution typical of packed binaries)
You need to recover the original binary for proper disassembly and decompilation in Ghidra or IDA
Automated UPX decompression fails because the malware author modified UPX magic bytes or headers
Do not use when dealing with custom packers, VM-based protectors (Themida, VMProtect), or samples where dynamic unpacking via debugging is more appropriate.
Prerequisites
UPX (Ultimate Packer for eXecutables) installed (apt install upx-ucl or download from https://upx.github.io/)
Detect It Easy (DIE) for packer identification
Python 3.8+ with pefile library for manual header repair
x64dbg or x32dbg for manual unpacking when automated tools fail
PE-bear or CFF Explorer for PE header inspection and repair
Isolated analysis VM without network connectivity
Workflow
Step 1: Identify the Packer
Determine if the sample is packed and identify the packer:
# Check with Detect It Easy
diec suspect.exe
# Check with UPX (test without unpacking)
upx -t suspect.exe
# Python-based entropy and packer detection
python3 << 'PYEOF'
import pefile
import math
pe = pefile.PE("suspect.exe")
print("Section Analysis:")
for section in pe.sections:
name = section.Name.decode().rstrip('\x00')
entropy = section.get_entropy()
raw = section.SizeOfRawData
virtual = section.Misc_VirtualSize
print(f" {name:8s} Entropy: {entropy:.2f} Raw: {raw:>8} Virtual: {virtual:>8}")
# Check for UPX section names
section_names = [s.Name.decode().rstrip('\x00') for s in pe.sections]
if section_names or section_names:
()
[s.lower() s section_names]:
()
hasattr(pe, ):
total_imports = (len(e.imports) e pe.DIRECTORY_ENTRY_IMPORT)
(f)
total_imports < 10:
()
:
()
PYEOF
'UPX0'
in
'UPX1'
in
print
"\n[!] UPX section names detected"
elif
'.upx'
in
for
in
print
"\n[!] UPX variant section names detected"
# Check import count (packed binaries have very few)
if
'DIRECTORY_ENTRY_IMPORT'
sum
for
in
print
"\nTotal imports: {total_imports}"
if
print
"[!] Very few imports - likely packed"
else
print
"\n[!] No import directory - heavily packed"
Step 2: Attempt Standard UPX Decompression
Try the built-in UPX decompression:
# Standard UPX decompress
upx -d suspect.exe -o unpacked.exe
# If UPX fails with "not packed by UPX" error, the headers may be modified# Verbose output for debugging
upx -d suspect.exe -o unpacked.exe -v 2>&1
# Verify the unpacked file
file unpacked.exe
diec unpacked.exe
Step 3: Repair Modified UPX Headers
If standard decompression fails, repair tampered magic bytes:
# Repair modified UPX headersimport struct
withopen("suspect.exe", "rb") as f:
data = bytearray(f.read())
# UPX magic bytes: "UPX!" (0x55505821)# Malware authors commonly modify these to prevent automatic unpacking# Search for modified UPX signatures
upx_magic = b"UPX!"
modified_patterns = [b"UPX0", b"UPX\x00", b"\x00PX!", b"UPx!"]
# Find and restore section names
pe_offset = struct.unpack_from("<I", data, 0x3C)[0]
num_sections = struct.unpack_from("<H", data, pe_offset + 6)[0]
section_table_offset = pe_offset + 0x18 + struct.unpack_from("<H", data, pe_offset + 0x14)[0]
print(f"PE offset: 0x{pe_offset:X}")
print(f"Number of sections: {num_sections}")
print(f"Section table offset: 0x{section_table_offset:X}")
for i inrange(num_sections):
offset = section_table_offset + (i * 40)
name = data[offset:offset+8]
print(f"Section {i}: {name}")
# Restore UPX magic bytes in the binary# Search for the UPX header signature location (typically near the end of packed data)for i inrange(len(data) - 4):
if data[i:i+3] == b"UPX"and data[i+3] != ord("!"):
print(f"Found modified UPX magic at offset 0x{i:X}: {data[i:i+4]}")
data[i:i+4] = b"UPX!"print(f"Restored to: UPX!")
# Also restore section names if modifiedfor i inrange(num_sections):
offset = section_table_offset + (i * 40)
name = data[offset:offset+8].rstrip(b'\x00')
if name in [b"UPX0", b"UPX1", b"UPX2"]:
continue# Already correct# Check for common modificationsif name.startswith(b"UP") or name.startswith(b"ux"):
original = f"UPX{i}".encode().ljust(8, b'\x00')
data[offset:offset+8] = original
print(f"Restored section name at 0x{offset:X} to {original}")
withopen("suspect_fixed.exe", "wb") as f:
f.write(data)
print("\nFixed file written. Retry: upx -d suspect_fixed.exe -o unpacked.exe")
Step 4: Manual Unpacking with Debugger
When automated unpacking fails entirely, use dynamic unpacking:
Manual UPX Unpacking with x64dbg:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1. Load packed sample in x64dbg
2. Run to the entry point (system breakpoint then F9)
3. UPX unpacking stub pattern:
a. PUSHAD (saves all registers)
b. Decompression loop (processes packed sections)
c. Resolves imports (LoadLibrary/GetProcAddress calls)
d. POPAD (restores registers)
e. JMP to OEP (original entry point)
4. Set hardware breakpoint on ESP after PUSHAD:
- After PUSHAD, right-click ESP in registers -> Follow in Dump
- Set hardware breakpoint on access at [ESP] address
- Run (F9) - breaks at POPAD before JMP to OEP
5. Step forward (F7/F8) until you reach the JMP to OEP
6. At OEP: Use Scylla plugin to dump and fix imports:
- Plugins -> Scylla -> OEP = current EIP
- Click "IAT Autosearch" -> "Get Imports"
- Click "Dump" to save unpacked binary
- Click "Fix Dump" to repair import table
Step 5: Validate Unpacked Binary
Verify the unpacked sample is valid and complete:
# Verify unpacked PE is valid
python3 << 'PYEOF'
import pefile
pe = pefile.PE("unpacked.exe")
# Check sections are normalprint("Unpacked Section Analysis:")
for section in pe.sections:
name = section.Name.decode().rstrip('\x00')
entropy = section.get_entropy()
print(f" {name:8s} Entropy: {entropy:.2f}")
# Verify imports are resolvedprint(f"\nImport count:")
if hasattr(pe, 'DIRECTORY_ENTRY_IMPORT'):
for entry in pe.DIRECTORY_ENTRY_IMPORT:
dll = entry.dll.decode()
count = len(entry.imports)
print(f" {dll}: {count} functions")
total = sum(len(e.imports) for e in pe.DIRECTORY_ENTRY_IMPORT)
print(f" Total: {total} imports")
# Compare file sizes
import os
packed_size = os.path.getsize("suspect.exe")
unpacked_size = os.path.getsize("unpacked.exe")
print(f"\nPacked: {packed_size:>10} bytes")
print(f"Unpacked: {unpacked_size:>10} bytes")
print(f"Ratio: {unpacked_size/packed_size:.1f}x")
PYEOF
Key Concepts
Term
Definition
Packing
Compressing or encrypting executable code to reduce file size and hinder static analysis; the binary contains an unpacking stub that restores code at runtime
UPX
Ultimate Packer for eXecutables; open-source executable packer commonly abused by malware authors because it is free and effective
Original Entry Point (OEP)
The real starting address of the malware code before packing; the unpacking stub decompresses code then jumps to the OEP
Import Reconstruction
Process of rebuilding the import address table after dumping an unpacked process from memory using tools like Scylla or ImpRec
PUSHAD/POPAD
x86 instructions that save/restore all general-purpose registers; UPX uses this pattern to preserve register state during unpacking
Section Entropy
Randomness measure of PE section data; packed sections show entropy > 7.0 while normal code sections average 5.0-6.5
Magic Bytes
Signature bytes within a file identifying its format; UPX uses "UPX!" which malware authors modify to prevent automated decompression
Tools & Systems
UPX: Open-source executable packer with built-in decompression capability for properly packed files
Detect It Easy (DIE): Packer, compiler, and linker detection tool that identifies protection on PE, ELF, and Mach-O files
x64dbg/x32dbg: Open-source Windows debugger used for manual unpacking through dynamic execution and breakpoint-based OEP finding
Scylla: Import reconstruction tool integrated with x64dbg for rebuilding IAT after memory dumping
PE-bear: PE file viewer and editor for inspecting and repairing PE headers after unpacking
Common Scenarios
Scenario: Unpacking Malware with Modified UPX Headers
Context: A malware sample is identified as UPX-packed by section names (UPX0, UPX1) but upx -d fails with "CantUnpackException: header corrupted". The malware author modified the UPX magic bytes to prevent automated decompression.
Approach:
Open the binary in a hex editor and search for the UPX header area (typically at the end of packed data)
Identify the modified magic bytes (e.g., "UPX!" changed to "UPX\x00" or completely zeroed)
Use the Python repair script to restore "UPX!" magic and correct section names
Retry upx -d on the repaired binary
If repair fails, fall back to manual unpacking with x64dbg (PUSHAD -> hardware BP on ESP -> POPAD -> JMP OEP)
Validate the unpacked binary has proper imports and reasonable entropy values
Import into Ghidra or IDA for full static analysis
Pitfalls:
Assuming UPX is the only packer; the binary may be double-packed (UPX + custom layer)
Modifying the original packed sample instead of working on a copy
Not reconstructing imports after manual memory dump (the dumped binary will crash without IAT fix)
Forgetting to check for overlay data appended after the UPX-packed PE sections
