Menu
Skills in this repository
SkillsMP has collected 1,040 skills from autohandai/community-skills. Open a skill to review its source and details.
autohandai/community-skillsShowing 40 of 1,040 collected skills.
Executes comprehensive red team exercises that simulate real-world adversary operations against an organization's people, processes, and technology. The red team operates with stealth as a primary objective, employing the full attack lifecycle from initial…
Identifies and exploits SQL injection vulnerabilities in web applications during authorized penetration tests using manual techniques and automated tools like sqlmap. The tester detects injection points through error-based, union-based, blind boolean, and…
Implement secure conduit architecture for OT remote access following IEC 62443 zones and conduits model, deploying jump servers, MFA-enabled gateways, session recording, and approval-based workflows to control vendor and engineer access to industrial control…
Deploy and configure the Dragos Platform for OT network monitoring, leveraging its 600+ industrial protocol parsers, intelligence-driven threat detection analytics, and asset visibility capabilities to protect ICS environments against threat groups like…
Deploy and configure Tofino industrial firewalls from Belden/Hirschmann to protect SCADA systems and PLCs using deep packet inspection for OT protocols including Modbus, EtherNet/IP, OPC, and S7comm, enforcing granular access control between ICS security…
This skill covers designing and implementing security zones and conduits for industrial automation and control systems (IACS) per IEC 62443-3-2. It addresses zone partitioning based on risk assessment, assigning Security Level targets (SL-T), designing…
This skill covers implementing North American Electric Reliability Corporation Critical Infrastructure Protection (NERC CIP) compliance controls for Bulk Electric System (BES) cyber systems. It addresses asset categorization (CIP-002), electronic security…
This skill covers implementing network segmentation in Operational Technology environments using VLANs, industrial firewalls, data diodes, and software-defined networking. It addresses the Purdue Model-based segmentation strategy, migration from flat networks…
Develop and implement OT-specific incident response playbooks aligned with SANS PICERL framework, IEC 62443, and NIST SP 800-82 that address unique ICS challenges including safety-critical systems, limited downtime tolerance, and coordination between IT SOC,…
Deploy Nozomi Networks Guardian sensors for passive OT network traffic analysis to achieve comprehensive asset visibility, real-time threat detection, and vulnerability assessment across industrial control systems without disrupting operations, leveraging…
This skill covers implementing a structured patch management program for OT/ICS environments where traditional IT patching approaches can cause process disruption or safety hazards. It addresses vendor compatibility testing, risk-based patch prioritization,…
Implement network segmentation based on the Purdue Enterprise Reference Architecture (PERA) model to separate industrial control system networks into hierarchical security zones from Level 0 physical process through Level 5 enterprise, enforcing strict…
Conduct a focused Active Directory penetration test to enumerate domain objects, discover attack paths with BloodHound, exploit Kerberos weaknesses, escalate privileges via ADCS/DCSync, and demonstrate domain compromise.
Performs authorized penetration testing of cloud environments across AWS, Azure, and GCP to identify IAM misconfigurations, exposed storage buckets, overly permissive security groups, serverless function vulnerabilities, and cloud-specific attack paths from…
Conduct a comprehensive external network penetration test to identify vulnerabilities in internet-facing infrastructure using PTES methodology, reconnaissance, scanning, exploitation, and reporting.
Perform comprehensive ICS/OT asset discovery using Claroty xDome platform, leveraging passive monitoring, Claroty Edge active queries, and integration ecosystem to gain full visibility into industrial control system assets including PLCs, RTUs, HMIs, and…
Performs comprehensive security assessments of IoT devices and their ecosystems by testing hardware interfaces, firmware, network communications, cloud APIs, and companion mobile applications. The tester uses firmware extraction and analysis, hardware…
This skill covers conducting cybersecurity assessments specific to oil and gas facilities including upstream (exploration/production), midstream (pipeline/transport), and downstream (refining/distribution) operations. It addresses SCADA systems controlling…
This skill covers conducting comprehensive security assessments of Operational Technology (OT) networks including SCADA systems, DCS architectures, and industrial control system communication paths. It addresses the Purdue Reference Model layers, identifies…
This skill covers performing vulnerability assessments in OT environments using the Claroty xDome platform for comprehensive asset discovery, risk scoring, vulnerability correlation, and remediation prioritization. It addresses passive vulnerability…
Perform vulnerability scanning in OT/ICS environments safely using passive monitoring, native protocol queries, and carefully controlled active scanning with Tenable OT Security to identify vulnerabilities without disrupting industrial processes or crashing…
This skill covers analyzing Programmable Logic Controller (PLC) firmware for security vulnerabilities including hardcoded credentials, insecure update mechanisms, backdoor functions, memory corruption flaws, and undocumented debug interfaces. It addresses…
This skill covers conducting cybersecurity assessments of electric power grid infrastructure including generation facilities, transmission substations, distribution systems, and energy management system (EMS) control centers. It addresses NERC CIP compliance…
Performs privilege escalation assessments on compromised Linux and Windows systems to identify paths from low-privilege access to root or SYSTEM-level control. The tester enumerates misconfigurations, vulnerable services, kernel exploits, SUID binaries,…
Perform security analysis of Siemens S7comm and S7CommPlus protocols used by SIMATIC S7 PLCs to identify vulnerabilities including replay attacks, integrity bypass, unauthorized CPU stop commands, and program download manipulation exploiting weaknesses in…
Perform security assessments of SCADA Human-Machine Interface (HMI) systems to identify vulnerabilities in web-based HMIs, thin-client configurations, authentication mechanisms, and communication channels between HMI and PLCs, aligned with IEC 62443 and NIST…
Conduct a thick client application penetration test to identify insecure local storage, hardcoded credentials, DLL hijacking, memory manipulation, and insecure API communication in desktop applications using dnSpy, Procmon, and Burp Suite.
Performs authenticated and unauthenticated vulnerability scanning using Tenable Nessus to identify known vulnerabilities, misconfigurations, default credentials, and missing patches across network infrastructure, servers, and applications. The scanner…
Performs systematic security testing of web applications following the OWASP Web Security Testing Guide (WSTG) methodology to identify vulnerabilities in authentication, authorization, input validation, session management, and business logic. The tester uses…
Execute a wireless network penetration test to assess WiFi security by capturing handshakes, cracking WPA2/WPA3 keys, detecting rogue access points, and testing wireless segmentation using Aircrack-ng and related tools.
This skill covers hardening and securing process historian servers (OSIsoft PI, Honeywell PHD, GE Proficy, AVEVA Historian) in OT environments. It addresses network placement across Purdue levels, access control for historian interfaces, data replication…
This skill covers implementing secure remote access to OT/ICS environments for operators, engineers, and vendors while preventing unauthorized access that could compromise industrial operations. It addresses jump server architecture, multi-factor…
Tests web applications for Cross-Site Scripting (XSS) vulnerabilities by injecting JavaScript payloads into reflected, stored, and DOM-based contexts to demonstrate client-side code execution, session hijacking, and user impersonation. The tester identifies…
Perform static analysis of Android APK malware samples using apktool for decompilation, jadx for Java source recovery, and androguard for permission analysis, manifest inspection, and suspicious API call detection.
Analyzes bootkit and advanced rootkit malware that infects the Master Boot Record (MBR), Volume Boot Record (VBR), or UEFI firmware to gain persistence below the operating system. Covers boot sector analysis, UEFI module inspection, and anti-rootkit detection…
Extract and analyze Cobalt Strike beacon configuration from PE files and memory dumps to identify C2 infrastructure, malleable profiles, and operator tradecraft.
Parse and analyze Cobalt Strike Malleable C2 profiles using dissect.cobaltstrike and pyMalleableC2 to extract C2 indicators, detect evasion techniques, and generate network detection signatures.
Analyzes malware command-and-control (C2) communication protocols to understand beacon patterns, command structures, data encoding, and infrastructure. Covers HTTP, HTTPS, DNS, and custom protocol C2 analysis for detection development and threat intelligence.…
Reverse engineer Go-compiled malware using Ghidra with specialized scripts for function recovery, string extraction, and type reconstruction in stripped Go binaries.
Detect and analyze heap spray attacks in memory dumps using Volatility3 plugins to identify NOP sled patterns, shellcode landing zones, and suspicious large allocations in process virtual address space.