sync-and-release

name

sync-and-release

description

End-to-end workflow to publish a new release after a Claude Code upstream version bump — re-applies un-nerfs to fresh stock, resolves any rule drift, commits the sync, tags `v<cc_version>-<iteration>`, and creates the GitHub release with the correct two-subsection body format. Use when fresh stock `.md` files from `~/.tweakcc/system-prompts/` have been copied into this repo (so `git status` shows the upstream delta as M/D/?) and the user wants to ship a new release.

Sync prompts to a new Claude Code version and cut a release

This skill automates the post-upstream-bump release workflow documented in README.md § Standard workflow after a Claude Code bump.

Preconditions (DO NOT bypass — check them before anything else)

1. Working directory is the repo root. Verify with git remote -v — it must point at github.com/BenIsLegit/tweakcc-system-prompts-unnerfed. If not, stop.
2. Fresh stock has already been copied in. git status --short must show a mix of M / D / ?? entries under system-prompts/. If the working tree is clean, the user hasn't done the wipe-and-regen step yet — tell them to follow README steps 1–4 first (rm -rf ~/.tweakcc/system-prompts, run npx tweakcc-fixed@latest, cp ~/.tweakcc/system-prompts/*.md system-prompts/).
3. The user has authorized pushes and publishing. This skill pushes commits, pushes tags, and publishes a GitHub release with a zip asset — all visible to others. If the user hasn't explicitly authorized these actions for this session, confirm once at the top before starting Phase 5.
4. Do NOT run tweakcc itself. The user runs tweakcc by hand against their local CC binary. This skill never touches ~/.tweakcc/ or the installed claude binary.

Required reading

Before making any per-file judgment call, read:

• README.md — especially §The un-nerf thesis (the bucket taxonomy). This is load-bearing for "should this new prompt get an un-nerf rule?" Without the bucket taxonomy you'll guess wrong.
• scripts/apply-unnerfs.py — top-of-file docstring plus the RULES dict. You may need to edit this file to update a drifted stock field or to add/remove a rule.

Overall phases

1. Inspect state & detect new ccVersion
2. Re-apply un-nerfs (iterate until zero FAILs, zero missing)
3. Bucket analysis on new / modified files (decide whether each needs a new rule)
4. Compose and commit the sync (temp file + -F, surgical staging)
5. Push the commit
6. Compute tag name, create annotated tag
7. Push the tag
8. Build the zip asset (from the committed tree, not the working copy)
9. Compose the release body (two-subsection format)
10. Publish the GitHub release
11. Verify (Latest flag, asset, body render)
12. Clean up temp files

Non-negotiable rules

These override default behavior — violating any of them breaks the repo's conventions:

• NEVER git add -A / git add . — stage files by name only.
• NEVER git commit --amend — use git reset --soft HEAD~1 + re-commit.
• NEVER force-push to origin/master or to any shared tag.
• NEVER skip git hooks (--no-verify, --no-gpg-sign) — if a hook fails, fix the cause.
• NEVER include Claude (or yourself) as a commit co-author.
• ALWAYS write multi-paragraph commit / tag / release messages to a temp file and pass via -F or --notes-file. Passing them inline via git commit -m "$(cat <<'EOF' ... EOF)" strips blank lines from the body through shell command substitution, which collapses the title/body separator. We have hit this bug; do not repeat it.
• ALWAYS verify after each destructive-ish operation: git status, git log -1, git show --no-patch --pretty=format:'%B' HEAD | head -5, gh release view.

---

Phase 1 — inspect state & detect new ccVersion

git status --short
git diff --stat HEAD
git log --oneline -5
git remote -v

The expected shape of git status --short:

• M lines: upstream reworded something in an existing prompt.
• D lines: upstream removed a prompt.
• ?? lines: upstream added a prompt.

If git status --short is empty, stop — preconditions failed (see above).

Detect the new ccVersion

The ccVersion lives in each .md file's HTML-comment frontmatter as ccVersion: X.Y.Z. After a bump, the modified files will carry the new version. Grab it from any M file:

grep -h '^ccVersion:' system-prompts/<one-of-the-M-files>.md

Or, to find the highest ccVersion in the whole tree (authoritative):

grep -h '^ccVersion:' system-prompts/*.md | sort -V | tail -1

Record the exact value — e.g. 2.1.117. You'll reuse it in the commit title, tag name, tag annotation, release title, release body, and zip filename. One source of truth — derive every placeholder from this single string.

Also check what tags already exist for this version:

git tag --list "v<VERSION>*"

• No match → this is iteration 1 (tag will be v<VERSION>-1).
• v<VERSION>-1 exists → iteration 2 (tag v<VERSION>-2). And so on.

---

Phase 2 — re-apply un-nerfs

python scripts/apply-unnerfs.py

Read the full output. The === Summary === block at the end is the source of truth:

Counter	Meaning	Action
Rules applied	Stock text matched, replaced with un-nerfed text.	Good.
Rules skipped	Un-nerfed text already present (idempotent re-run).	Good.
Rules FAILED	Neither stock nor un-nerfed text was found.	Must resolve before continuing.
Missing files	A rule targets a file that no longer exists.	Remove the rule (see below).

Common shape after a clean version bump:

• Fresh stock just copied in → expect Rules applied: N, Rules skipped: 0, FAILED: 0.
• Script re-run after Phase 2 already succeeded → expect Rules applied: 0, Rules skipped: N.

Resolving FAILs (iterate until zero)

For each [FAIL] entry in the report:

1. Read the named file in full. The report quotes the first ~200 chars of the expected stock — use that as a substring search to find where upstream moved the passage.
2. Open scripts/apply-unnerfs.py. Find the rule: Rule(stock=..., unnerf=..., description=...) under the filename key in the RULES dict.
3. Update the stock field to match the new upstream wording byte-exactly:
   • Preserve template literals (${VAR}), backticks, punctuation.
   • Preserve trailing whitespace (Python's multiline strings are picky here).
4. The unnerf field usually doesn't change — it's the target state. Only update it if upstream restructured the passage enough that the original replacement no longer fits.
5. Re-run python scripts/apply-unnerfs.py. Confirm the specific FAIL dropped off.
6. If another FAIL appears (possibly unmasked by the first fix), repeat. Loop until Rules FAILED: 0.

Resolving Missing files

Caused by upstream deleting a file that a rule referenced.

1. Cross-check git status --short for a D entry matching the missing filename.
2. If confirmed deleted: open apply-unnerfs.py, remove the corresponding "system-prompts/<filename>.md": [...] entry from RULES. Note the removal in the sync commit body (the total rule count drops).
3. If NOT in D status: something else is wrong (stock copy-in incomplete?). Ask the user.

Final gate for Phase 2

Re-run once more and confirm Rules FAILED: 0 and Missing files: 0. Only then proceed.

---

Phase 3 — bucket analysis on new and modified files

This is the judgment step. A careless sync skips it; a careful sync produces per-file analysis that appears in both the commit body and the release body.

The bucket taxonomy (restated — source of truth is the README)

Bucket	Examples	Action
1. Chat-brevity	"respond in 2-3 sentences", "terse one-liner is fine", length cap for classifier/structured output	Keep stock.
2. Implementation-brevity	"simplest approach", "don't add abstractions", "don't gold-plate", "match the scope"	Flip — add rule.
3. Process-brevity	"as quickly as possible", "don't explore more than necessary", "report back concisely"	Flip — add rule.
4. Thoroughness	"think step by step", "consider edge cases", "check your work"	Amplify if weakened.

For each added (??) or modified (M) file

1. Read the whole file (the body, not just the diff — context matters).
2. List every directive-shaped sentence. Classify each into a bucket.
3. Decision:
   • Any bucket 2 / 3 directive → new rule warranted.
   • Bucket 4 directive that upstream weakened → new rule to restore strength.
   • Only bucket 1 or no directives → leave stock; document the "leave stock" decision.
4. Write a 2–4 sentence analysis summary for this file. Don't silently skip: the analysis ends up verbatim (or close to it) in the commit body and release body.

Edge cases

• Structured output / classifier-consumed prompts. These often carry "one line" or similar length caps. If the cap is a tokenization/parsing aid (the downstream system can't handle variable-length output), it's bucket 1 — keep stock. If the cap is there purely to make the model respond tersely to humans, it's still bucket 1 but worth mentioning as a revisit candidate.
• Autonomous-operation pragma. Lines like "don't ask when a guess is cheaper than the round-trip" are about when to prompt the human, not about work quality — not bucket 3 process-brevity. Leave stock.
• Prompts that are already thesis-aligned. Some new prompts (narration-heavy, sanity-check-heavy) ship already pro-thoroughness. Document the alignment and move on.

Adding a new rule

# In scripts/apply-unnerfs.py, inside the RULES dict:
"system-prompts/<filename>.md": [
    Rule(
        stock="<exact text from new upstream, byte-exact>",
        unnerf="<thorough-over-brief replacement>",
        description="<short scannable label>",
    ),
    # ... more rules for the same file if needed
],

After editing:

python scripts/apply-unnerfs.py --dry-run --only <filename>.md   # preview
python scripts/apply-unnerfs.py --only <filename>.md             # actually apply
python scripts/apply-unnerfs.py --check                          # full tree must be idempotent

Removing a rule

If upstream deleted a file the rule targeted, delete the whole entry from RULES. Mention the rule-count change in the commit body.

---

Phase 4 — compose and commit the sync

Commit message template

sync prompts to Claude Code v<VERSION>

<One-paragraph summary: what upstream changed, net file count delta,
whether new un-nerf rules were added. Keep to 2-3 sentences.>

## Modified: <path to each M file>

<For each: what upstream changed. Whether any existing rule's stock text
drifted and was updated. Whether new un-nerfs were warranted (bucket
analysis, 2-3 sentences).>

## Deleted: <path to each D file>

<For each: confirmation that no rule in apply-unnerfs.py targeted it, OR
note that a rule was removed.>

## Added: <path to each new file>

<For each: one-paragraph description of what the prompt does. Then the
bucket analysis: which directives exist, which bucket each falls into,
and why the decision is to add a rule / leave stock.>

## Script state

`apply-unnerfs.py` run after the stock copy-in reports <N>/<N> rules
applied, <M> skipped, 0 failed, 0 missing — every pre-existing un-nerf
still matches the v<VERSION> stock text byte-exactly. <If rules changed:
"+K new rule(s) for <file>, -L removed rule(s) for <deleted file>.">

Execute

# 1. Write message to temp file (NEVER inline via HEREDOC-in-$(...))
TMPMSG=$(mktemp --suffix=.txt)

Then use the Write tool to populate $TMPMSG with the full message — this is the only way to guarantee blank-line preservation.

# 2. Stage files surgically
git add system-prompts/<file1>.md system-prompts/<file2>.md system-prompts/<file3>.md
# If rules changed:
git add scripts/apply-unnerfs.py

# 3. Verify staging
git status --short
# Should show exactly the files you intended. No surprises.

# 4. Commit
git commit -F "$TMPMSG"

# 5. Verify formatting — line 2 of the body should be BLANK
git show --no-patch --pretty=format:'%B' HEAD | cat -A | head -5
# Expected:
#   sync prompts to Claude Code v<VERSION>$
#   $                                          <-- this blank line is the critical check
#   <first paragraph>$
#   ...

# 6. Clean up message file
rm "$TMPMSG"

If formatting is wrong (no blank line between title and body)

git reset --soft HEAD~1             # uncommit; keeps staging intact; ORIG_HEAD preserved
# Fix the temp file / rewrite $TMPMSG
git commit -F "$TMPMSG"              # re-commit

The old SHA remains recoverable via git reflog / ORIG_HEAD for ~90 days.

---

Phase 5 — push the commit

If the user hasn't explicitly authorized pushes this session, confirm once here before running. After confirmation:

git push origin master

Verify the push landed:

git fetch origin && git rev-list --left-right --count origin/master...HEAD
# Expect: 0<TAB>0

---

Phase 6 — compute tag name and create annotated tag

Tag name: v<VERSION>-<ITERATION>, where <ITERATION> was determined in Phase 1.

Tag annotation template

Un-nerfed system prompts for Claude Code v<VERSION> (iteration <N>)

Tagged snapshot aligned with Claude Code v<VERSION>, extracted via
tweakcc-fixed. Delta from v<PREV_TAG>: <1-2 sentences on file-count
delta and any notable upstream changes>. All un-nerfs remain idempotent
under scripts/apply-unnerfs.py (<N>/<N> rules applied against fresh
v<VERSION> stock, <M> skipped, 0 failed). <If rule changes: "Added K
new rule(s) for <file>." / "Removed L rule(s) for deleted <file>.">

The -<N> suffix is the iteration number against the same CC version;
future tweaks on top of v<VERSION> ship as v<VERSION>-<N+1>, etc.

Release asset system-prompts-v<VERSION>-<N>.zip contains the
<FILE_COUNT> .md files flat at the zip root, drop-in for
~/.tweakcc/system-prompts/.

Execute

TMPTAG=$(mktemp --suffix=.txt)
# Use Write tool to populate $TMPTAG with the annotation

git tag -a "v<VERSION>-<N>" -F "$TMPTAG" HEAD

# Verify
git show --no-patch "v<VERSION>-<N>" | head -25

rm "$TMPTAG"

---

Phase 7 — push the tag

git push origin "v<VERSION>-<N>"

---

Phase 8 — build the zip asset

Always source the zip from the committed tree, not the working copy — this guarantees the zip's contents match what the tag points at.

# Pick a stable temp path (NOT mktemp .zip — we need a specific filename for the asset)
ZIP_PATH="${TMPDIR:-/tmp}/system-prompts-v<VERSION>-<N>.zip"
rm -f "$ZIP_PATH"  # in case a stale one exists
git archive --format=zip -o "$ZIP_PATH" HEAD:system-prompts

# Verify: every entry is an .md file, flat at the root, count matches the repo
ls -la "$ZIP_PATH"
python - <<'PY'
import zipfile, os
path = os.environ.get("ZIP_PATH") or "<paste $ZIP_PATH>"
z = zipfile.ZipFile(path)
names = z.namelist()
md = [n for n in names if n.endswith(".md")]
non_md = [n for n in names if not n.endswith(".md")]
subdirs = [n for n in names if "/" in n]
print(f"total entries: {len(names)}")
print(f".md files   : {len(md)}")
print(f"non-md       : {non_md}")
print(f"with subdirs : {len(subdirs)}")
PY

Expected: total == md count == <repo file count>, non-md empty, subdirs == 0. If subdirs > 0, the HEAD:system-prompts tree-reference went wrong — fix before continuing.

Record two numbers for the release body:

• <FILE_COUNT> — number of .md files
• <SIZE_KB> — zip size in KB, rounded to nearest 10 (e.g. "~400 KB")

---

Phase 9 — compose the release body

Previous-tag lookup (for the "Changes since" link)

Before creating the new release:

gh release list --limit 1 --json tagName --jq '.[0].tagName'
# Returns the tag of the current latest release — use this as <PREV_TAG>.

Release body template

Un-nerfed Claude Code **v<VERSION>** system prompts — current latest.

- **Zip contents:** <FILE_COUNT> `.md` files at the zip root, ~<SIZE_KB> KB compressed.
- **Drop-in for:** `~/.tweakcc/system-prompts/`.
- **Full context:** [README at this tag](https://github.com/BenIsLegit/tweakcc-system-prompts-unnerfed/blob/v<VERSION>-<N>/README.md) — un-nerf thesis, before/after examples, install steps, post-bump re-apply workflow.
- **Install note:** requires [`tweakcc-fixed`](https://github.com/BenIsLegit/tweakcc-fixed) until upstream tweakcc catches up to Claude Code builds newer than v2.1.113.

## Changes since [`<PREV_TAG>`](https://github.com/BenIsLegit/tweakcc-system-prompts-unnerfed/releases/tag/<PREV_TAG>)

### Upstream (from Anthropic — Claude Code v<PREV_VERSION> → v<VERSION>)

These changes came from Anthropic's v<VERSION> build itself. This repo did **not** author any of them — they flow through verbatim from the stock `tweakcc` extraction, before any un-nerfing is applied.

- **+N file(s):** <new filename> — <one-sentence description of what the prompt does>
- **−N file(s):** <deleted filename> — removed entirely.
- **<change type> in `<filename>`:** <summary of the user-visible change, 1-2 sentences>

Net file count: <TOTAL>, <unchanged from <PREV_TAG> | +K from <PREV_TAG>>.

### This repo (un-nerf re-application only)

These are the only things this repo did on top of the upstream extraction. **No new prompt wording was authored here.** The un-nerfs are the same rules shipped in prior releases, replayed against the fresh v<VERSION> stock.

- **Un-nerfs re-applied cleanly:** `scripts/apply-unnerfs.py` reports **<N>/<N> rules applied, <M> skipped, 0 failed, 0 missing** against the fresh v<VERSION> stock. Every pre-existing un-nerf still matched upstream wording byte-exactly — no rule drift to chase, no rule body edits required.
- <EITHER:> **No new un-nerf rules added.** <Short bucket-analysis summary for new/modified files, 2-3 sentences, explaining why the decision was "leave stock". Link to the bucket taxonomy in the README.>
- <OR:> **Added <K> new un-nerf rule(s):** <bullet each new rule with filename + 1-sentence rationale>.
- <IF a rule was removed because a file was deleted:> **Removed <L> un-nerf rule(s)** because upstream deleted the targeted file(s): <list>.

---

**Version scheme.** `-<N>` is an iteration counter against the same Claude Code version.

Filling the template

Every placeholder derives from data already gathered:

• <VERSION>, <N> — from Phase 1.
• <PREV_TAG>, <PREV_VERSION> — from gh release list --limit 1. <PREV_VERSION> is <PREV_TAG> minus the -N suffix.
• <FILE_COUNT>, <SIZE_KB> — from Phase 8.
• <TOTAL> — the same as <FILE_COUNT>.
• The per-file bullets in the Upstream section — from the Phase 3 analysis.
• The un-nerf summary in the This-repo section — from the Phase 3 analysis + Phase 2 script output.

---

Phase 10 — publish the GitHub release

TMPBODY=$(mktemp --suffix=.md)
# Use Write tool to populate $TMPBODY with the composed release body

gh release create "v<VERSION>-<N>" "$ZIP_PATH" \
    --title "v<VERSION>-<N>" \
    --notes-file "$TMPBODY"

# The command outputs the release URL on success.

---

Phase 11 — verify

gh release view "v<VERSION>-<N>" --json name,tagName,isDraft,isPrerelease,assets,body \
    --jq '{name, tagName, isDraft, isPrerelease, asset_count: (.assets | length), asset: .assets[0].name, body_preview: .body[0:500]}'

gh release list --limit 3

Expected:

• name == tagName == "v<VERSION>-<N>".
• isDraft: false, isPrerelease: false.
• asset_count: 1, asset: "system-prompts-v<VERSION>-<N>.zip".
• body_preview starts with Un-nerfed Claude Code **v<VERSION>**.
• In gh release list, the new release is line 1 with the Latest marker; the previous release has been demoted (no Latest marker).

If anything's off:

• Body wrong → gh release edit v<VERSION>-<N> --notes-file <new-body-file> (safe — doesn't touch tag/asset/flags).
• Asset wrong → gh release upload v<VERSION>-<N> <new-zip> --clobber.
• Wrong tag commit (very rare) → stop and escalate to the user; fixing this involves deleting the tag both locally and on origin, which is destructive.

---

Phase 12 — clean up

rm -f "$ZIP_PATH" "$TMPBODY"
# $TMPMSG and $TMPTAG should already be cleaned up from their respective phases.

Verify the working tree is clean:

git status --short
# Should be empty (assuming no unrelated local changes).

---

End-of-turn summary template

When all phases are complete, give the user a summary covering:

1. Commit: SHA, title, push status.
2. Tag: name, annotation preview, push status.
3. Release: URL, Latest flag confirmation, asset filename and size, body's two-subsection structure confirmed.
4. apply-unnerfs.py state: rule counts (applied / skipped / failed / missing), plus any rules added or removed in this sync.
5. Per-file bucket analysis outcomes: one line per new/modified file so the user can audit the judgment calls without re-reading the commit body.
6. Anything unusual — FAILs that required rule updates, edge cases in bucket analysis, new un-nerf rules that would benefit from a dedicated README example, etc.

Aim for a summary that a reader who didn't watch the session can read cold and know exactly what shipped.