clinical-research

name	clinical-research
description	Clinical study operations — protocol structure, endpoint selection, eligibility design, sample-size and power planning, site feasibility, and documentation readiness. Use when planning, auditing, or costing a study.
license	MIT + Commons Clause
metadata	{"version":"1.0.0","author":"borghei","category":"research-ops","domain":"clinical-operations","updated":"2026-07-21T00:00:00.000Z","tags":["protocol","endpoints","sample-size","power","site-feasibility","ich-gcp"]}

Clinical Research

Operational support for running clinical studies: structuring a protocol so it survives review, choosing endpoints that are actually analysable, designing eligibility criteria that do not strangle accrual, planning sample size and power, and testing whether the site network can deliver the enrolment target.

Scope and limits. This skill supports study operations — planning, structuring, and auditing. It is not a substitute for a qualified biostatistician, and it is not regulatory advice. The sample-size calculator assumes a simple parallel design with no interim analyses, multiplicity adjustment, covariate adjustment, or clustering; any design departing from those assumptions requires a statistician. The protocol auditor checks structure and internal consistency, not regulatory acceptability. Every artifact produced here needs sign-off from qualified biostatistics, clinical, and regulatory affairs personnel before it enters a submission.

When to use this skill

• Planning a study and needing a defensible sample size before the budget and site count can be set
• Auditing a draft protocol for missing ICH E6 elements before it goes to an ethics committee or a sponsor review board
• Choosing between candidate endpoints where one is clinically meaningful and the other is achievable in the available sample
• Designing inclusion and exclusion criteria and needing to see the accrual cost of each additional restriction
• Assessing site feasibility — deciding how many sites, and which, are needed to hit an enrolment target inside the accrual window
• Diagnosing an under-accruing study and deciding between adding sites, extending the window, or amending eligibility

Inputs the skill expects

• Study phase, design (parallel, crossover, single-arm), and blinding
• The primary question in a form that names the comparison
• Candidate endpoints with their measurement instrument and timepoint
• Effect size assumptions and their source — prior study, pilot, or literature
• Expected dropout rate, from comparable studies where possible
• For feasibility: candidate sites with eligible population, prior accrual attainment, startup time, and competing studies

Clarify First

Before generating, confirm these inputs. If any is unknown or vague, ASK — do not assume:

• The primary endpoint and its measurement timepoint — everything downstream (sample size, visit schedule, site burden, cost) derives from it
• The effect size and where it came from — a literature effect and a pilot effect carry very different uncertainty, and a pilot-derived SD needs an inflation allowance
• Design features that break the simple formulas — interim analyses, co-primary endpoints, cluster randomisation, or crossover each require a different calculation and a statistician
• The enrolment window and site network available — a sample size that cannot be accrued is not a plan

Stop rule: ask only the 2-3 that most change the output. If the user says "just draft it," proceed and list your assumptions at the top of the artifact.

Workflows

Workflow 1 — Plan sample size and power

1. Fix the primary endpoint and its type: binary, continuous, or time-to-event. This selects the design, and the design selects the formula.
2. State the effect size you want to detect and where it came from. [PROVEN] Power for the smallest effect that would change clinical practice, not for the effect you hope to see — the latter systematically under-powers studies.
3. Set alpha (0.05 two-sided unless the protocol justifies otherwise), power (80% minimum, 90% where feasible), allocation ratio, and dropout rate.
4. Run the calculator. Read both the analysed n and the enrol n — the dropout inflation is the number that drives the budget.
5. If you have a fixed n constrained by budget or accrual, pass it as planned_n_per_group and read the achieved power instead.
6. Take the result to a biostatistician. This step is not optional.

python3 research-ops/clinical-research/scripts/sample_size_calculator.py \
  --input research-ops/clinical-research/assets/sample_power_spec.json \
  --format text

Workflow 2 — Audit a protocol outline

1. Map the draft protocol's sections onto the ICH E6 element keys.
2. Enter endpoints with role, measure, timepoint, and analysis population; enter inclusion and exclusion criteria verbatim.
3. Run the auditor. It reports missing sections, endpoints that cannot be analysed as written, eligibility criteria that conflict or duplicate, and gaps in the statistical and safety sections.
4. Clear every fail before circulating the draft. Missing sections and an unadjusted interim analysis are the two findings most likely to cost you a review cycle.

python3 research-ops/clinical-research/scripts/protocol_auditor.py \
  --input research-ops/clinical-research/assets/sample_protocol.json \
  --format text

Workflow 3 — Test the site network against the enrolment target

1. Collect per-site data: eligible annual population, self-reported accrual estimate, prior accrual attainment, startup time, coordinator status, and competing studies.
2. Run the feasibility scorer. It discounts self-reported estimates, blends in the site's historical attainment, caps against eligible population, and subtracts startup time from the accrual window.
3. Read the shortfall. If it is positive, the choice is more sites, a longer window, or looser eligibility — decide deliberately rather than discovering it at month 14.
4. Use --select to test whether a smaller, higher-quality site set beats a larger one. It usually does on cost, and often on total accrual.

python3 research-ops/clinical-research/scripts/site_feasibility_scorer.py \
  --input research-ops/clinical-research/assets/sample_sites.json \
  --select 5 --format text

Decision frameworks

Endpoint type drives everything

Endpoint type	Design	Sample driver	Typical relative n
Continuous (change in a scale)	Two means	Standardised effect size δ/σ	Smallest
Binary (responder yes/no)	Two proportions	Absolute difference and baseline rate	2-4x the continuous equivalent
Time-to-event	Log-rank	Hazard ratio and event probability	Driven by events, not enrolment
Count / rate	Poisson or negative binomial	Rate ratio and dispersion	Requires a statistician
Composite	Depends on components	The component that dominates	Interpretation risk is high

[PROVEN] Where the same clinical question can be posed as continuous or binary, the continuous version needs materially fewer participants. Dichotomising a continuous measure discards information and inflates n — do it only when the threshold itself is what is clinically meaningful.

Effect size sources and their reliability

Source	Reliability	Adjustment
Large completed trial in the same population	[PROVEN] highest	Use as-is
Meta-analysis of comparable trials	[PROVEN] high	Use the pooled estimate; check heterogeneity
Single published trial, different population	[RECOMMENDED] moderate	Discount by 20-30%; effects rarely transfer intact
Internal pilot study	[RECOMMENDED] moderate	Add 10-15% to n; a pilot SD is imprecise
Clinician consensus on the minimum meaningful difference	[RECOMMENDED]	Best basis for the target, not for the variance
The effect needed to make the business case work	Not a source	This is how under-powered studies get funded

That last row is a real failure mode. When the affordable sample size is back-solved into an effect size, the study is designed to fail and the failure is uninterpretable — you cannot distinguish "no effect" from "not enough people."

Eligibility restrictiveness

Every criterion trades internal validity for accrual and generalisability.

Criteria count	Typical effect
Under 15	Broad, fast accrual, high generalisability
15-25	Standard for a phase 3 study
25-35	Screen failure rates climb steeply; accrual timelines stretch
Over 35	Accrual frequently fails; the treated population may not resemble the studied one

[RECOMMENDED] For every criterion beyond about 20, require a written justification naming the specific safety or interpretability risk it addresses. Criteria accumulate through review by addition — nobody is ever assigned to remove one — and the cumulative accrual cost is invisible at the point each is added.

Anti-Patterns

Back-Solved Power

Mistake: Deciding the affordable sample size first, then choosing the effect size that makes that n reach 80% power. Why it happens: The budget is fixed before the science is planned, and the calculation is treated as a document to produce rather than a constraint to respect. Instead: Compute n from the smallest clinically meaningful effect. If that n is unaffordable, the honest options are to seek more funding, run a smaller study explicitly labelled as a pilot with a feasibility objective, or not run it. A study powered for an implausibly large effect consumes the same budget and produces an uninterpretable result.

The Optimistic Site Estimate

Mistake: Building the accrual plan on the enrolment rates sites report during feasibility questionnaires. Why it happens: Sites want to be selected, the estimate is made by someone who is not the person who will do the recruiting, and nobody is ever penalised for an optimistic feasibility response. Instead: Discount every self-reported estimate substantially and weight by the site's actual attainment on previous studies. Cross-check against the eligible population they reported — a site claiming 8 participants a month from a clinic seeing 180 eligible patients a year is claiming a screening yield that does not occur. Plan for the discounted number and treat outperformance as upside.

Criterion Creep

Mistake: Each protocol review round adds two or three exclusion criteria, and the final protocol has 40. Why it happens: Every reviewer can name a subgroup that might complicate interpretation, and adding an exclusion is a costless-looking way to resolve the comment. Nobody's job is to remove one. Instead: Cap the criteria count in the protocol plan and treat additions as trade-offs requiring an explicit removal or a written justification of the accrual cost. Track the projected screen failure rate as criteria accumulate and put that number in front of reviewers.

The Unanalysable Endpoint

Mistake: A primary endpoint like "improvement in patient wellbeing" with no named instrument, threshold, or timepoint. Why it happens: It is written early as a placeholder during objective-setting and is never converted into an operational definition. Instead: Every endpoint needs four things before the protocol circulates: the instrument, the metric derived from it, the threshold or contrast that defines the outcome, and the timepoint. If any of the four is missing, the endpoint cannot be powered, collected consistently, or analysed.

Silent Interim Looks

Mistake: Planning an interim analysis without an alpha spending function, or examining accumulating data informally "just to see how it is going." Why it happens: Interim looks feel like prudent management, and the statistical cost is invisible to anyone not looking for it. Instead: Pre-specify every interim analysis with its alpha spending function and stopping boundaries, and restrict access to unblinded accumulating data to an independent monitoring committee. Unadjusted repeated testing inflates type I error, and an informal look by the sponsor team compromises the trial's integrity even when nothing is acted on.

Files

File	Purpose
scripts/sample_size_calculator.py	Sample size and power CLI: input validation, dropout inflation, planning warnings, and reporting
scripts/power_formulas.py	Design formulas imported by sample_size_calculator.py: the two-proportion, two-mean (with t-correction), and log-rank sample-size calculations, the achieved-power inversions, and the method notes reported with every result. Edit here to revise the statistics
scripts/protocol_auditor.py	Audits a protocol outline against ICH E6 elements, endpoint definitions, and eligibility consistency
scripts/protocol_rules.py	Rule definitions imported by protocol_auditor.py: the ICH E6 required-section table and its guidance strings, vague-measure and DSMB-phase thresholds, the SAE reporting window, severity ordering, and the finding accumulator. Edit here to revise what the audit expects
scripts/site_feasibility_scorer.py	Discounts site accrual estimates and tests the network against the enrolment target
references/protocol-and-endpoint-design.md	ICH E6 protocol contents, endpoint hierarchies, eligibility design, estimand framing
references/statistical-planning.md	Formulas, worked examples, design effects, interim analysis, and when to escalate to a statistician
assets/protocol-outline-template.md	The protocol skeleton with every required element
assets/sample_power_spec.json	Runnable input for the sample size calculator
assets/sample_protocol.json	Runnable input for the protocol auditor
assets/sample_sites.json	Runnable input for the site feasibility scorer