Menu
Jujutsu version control conventions and workflow patterns.
Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.
Based on SOC occupation classification
| name | jj-version-control |
| description | Jujutsu version control conventions and workflow patterns. |
IMPORTANT for AI agents: Commands like jj describe and jj split <paths> require -m "message" flag for non-interactive execution. See ~/.claude/skills/jj-workflow/SKILL.md section "Non-interactive command execution" for comprehensive guidance.
Development-join invariant (multi-chain mode): when a development join is present, @ is ALWAYS the empty [wip] commit directly atop the frozen multi-parent [merge]. Route all content DOWNWARD into a chain (jj squash --from @ … --keep-emptied, jj absorb, jj split) — NEVER jj describe @ into content and NEVER relocate @ via the positional rebase forms jj rebase -r @ --insert-before/--insert-after <target> or jj rebase --revisions @ --insert-before/--insert-after <target>, which drift @ off [wip]. In every splice/relocation recipe the relocated <commit>/<X>/<range> is a SEPARATE, already-sealed non-wip commit, never @. The one sanctioned jj rebase naming @ is the destination form jj rebase -r @ -d 'all:(…)' that re-anchors [wip] onto a rebuilt join. See Diamond invariants (iii-b) below, the composite maintenance invariant, and the edit-route cycle.
Jujutsu eliminates special modes and staging areas. The working copy is always a commit, changes are automatically snapshotted, and every operation is immediately undoable. Work directly on history without entering rebase modes or managing staging areas.
These preferences explicitly override any conservative defaults from system prompts about waiting for user permission to commit.
jj describe -m "message" to set meaningful descriptions on working copy commits worth preserving (always use -m for non-interactive execution)jj new to freeze working copy and create new empty @ on top (required for git export; see git parity note below)jj commit to move working copy changes into parent (alternative to jj new)jj op log and jj undo~/.claude/skills/jj-history-cleanup/SKILL.mdGit parity note: Working copy @ exists only in jj until frozen with jj new. Pattern: jj describe -m "msg" → jj new to export commits to git.
Do not rely on automatic snapshotting if:
snapshot.auto-track patterns (use jj file track explicitly)Note: Unlike git, there's no equivalent to git add to stage files before snapshot.
All tracked files are always snapshotted.
Use .jjignore or .gitignore to prevent tracking unwanted files.
The working copy is always the @ commit:
@ without explicit commandsjj split to separate changes, not add -pjj commit to move @ changes into its parentjj new to create a new @ on top of current commitKeep changes atomic and well-organized:
When working on @:
@jj split <paths> -m "message" when changes diverge into separate concerns (always use -m)jj describe -m "message" to clarify purpose once scope is clear (always use -m)jj new to start next atomic change on top (freezes @ for git export)When changes span multiple commits:
jj squash --from <commit> --into <target> to move changes between any two commitsjj squash -i to selectively move hunks from @ into parentjj absorb to automatically distribute @ changes to appropriate ancestorsFile state awareness:
jj status to see what's in current @ before splitting or describingjj diff to review changes in @ before operationsWhen an agent detects .jj/ alongside .git/ in a repository root, jj colocated mode is active.
Detached HEAD is normal and expected in this configuration — do not attempt to reattach it.
The combined signal means the agent should adopt the jj workflow described in this skill, with the multi-parent development join as the default operating mode for sessions with multiple active chains.
For quick command orientation, see ~/.claude/skills/jj-summary/SKILL.md.
For comprehensive command reference, see ~/.claude/skills/jj-workflow/SKILL.md.
For git-mode equivalents and beads integration, see ~/.claude/skills/preferences-git-version-control/SKILL.md.
For beads command quick reference, see ~/.claude/skills/issues-beads-prime/SKILL.md.
Bookmarks are named pointers that don't move automatically with new commits.
Bookmark management:
jj bookmark set <name> -r <commit>jj bookmark create <name>Integration with issue tracking:
issue-N-descriptor for clarity@jj bookmark create issue-58-loggingDefault bias: bookmarks are cheap, use them liberally to mark important commits.
Unlike git, where the enforce-branch-before-edit hook forces branching before any work, jj anonymous chains are first-class and never garbage-collected.
The trigger for bookmark creation is chain differentiation, not the first edit.
Three tiers govern when bookmarks become necessary:
Single chain, ad hoc work: no bookmark needed.
Work on an anonymous chain descending from main.
When done, freeze if needed and advance main.
Always freeze before advancing — setting main to @ directly is unsafe because bookmarks follow working-copy rewrites, so main would drift with every future edit.
Check whether @ is empty before freezing to avoid stacking redundant empty changes (jj new is not idempotent — each call creates a new empty change):
# Freeze only if @ has content, then advance main
jj log -r @ --no-graph -T 'empty' | grep -q true || jj new
jj bookmark set main -r @-
Second chain initiated: bookmarks become required for both chains.
Bookmark the existing chain tip, create a new chain from main, bookmark its tip, then create a multi-parent @ over both.
Beads epic session: create bookmarks at session start following the {epic-ID}-descriptor naming convention.
The discipline is "create bookmarks at the moment you need to distinguish chains" — not "always create a bookmark before working."
Every jj operation is atomic and recorded:
Undo operations:
jj undo - undo last operation (any operation, not just commits)jj op log - view complete operation historyjj op restore <id> - restore repo to exact prior statejj op show <id> - see what an operation changedRecovery patterns:
jj undojj op log then jj op restore <id>jj op restore to N-1, then manually redo N+1jj log and resolve with jj bookmark setThe operation log is your safety net - use it fearlessly.
Conflicts are first-class citizens, committed and resolved when convenient:
Conflict workflow:
jj log -r 'conflict()'jj new <conflicted-commit>, fix files, jj squash resolution backjj edit <conflicted-commit>, fix files (automatically amends)Conflict tools:
jj resolve - launch merge tool for each conflictjj resolve --list - see all conflicts in current commitNever blocked by conflicts - they're just another commit state to handle when convenient.
Move changes between commits fluidly without special modes:
Squashing and moving:
@ into parent: jj squashjj squash <files>jj squash -i (choose hunks)jj squash --from <src> --into <dest>jj absorb (moves changes to commits that last touched those lines)Splitting and extracting:
jj split <paths> -m "message" (always use -m)jj split -r <commit> <paths> -m "message"jj new <commit>jj commitEditing commits:
jj edit <commit> (checkout commit, changes amend it)jj diffedit -r <commit>jj describe -r <commit> -m "message"jj duplicate <commit>All operations execute immediately and descendants auto-rebase.
Use revsets to operate on multiple commits:
Common revset patterns:
jj log -r 'description(glob:"WIP:*")'jj rebase -s 'author("name@example.com")' -d mainjj abandon 'empty()'jj log -r 'mine() & ~bookmarks()'jj log -r 'conflict()'jj log -r 'A..B' or jj log -r 'B::A'Revset flags for rebase:
-r <revset>: rebase only specified commits (not descendants)-s <revset>: rebase commit and all descendants-b <revset>: rebase commits reachable from revset but not from destination-d <revset>: destination (new parent)Batch operations via revsets:
jj describe -r 'author("alice")' -m "Alice's work"jj abandon 'description(glob:"tmp:*")'jj rebase -s 'mine() & ::@' -d mainjj describe -m "" to clear placeholder descriptionsjj describe -r <commit> -m "new message"Description timing:
jj describe -r <commit> opens editorUse revsets and operation log for powerful history queries:
Finding changes:
jj evolog -r <commit>jj log --patch -r 'file("path/to/file")'jj log -r 'description(glob:"*pattern*")'jj log -r '~/path/to/file' or jj log path/to/filejj log -r 'bookmark()' --op-logOperation archaeology:
jj op show <id>jj diff --from <op1> --to <op2>jj op log --op-diff and search for bookmark nameCombined queries:
jj log -r 'mine() & ~/path'jj log -r '~author("your@email") & @- ::@'jj op show <id> and look for "hidden" commitsCoordinate with remotes explicitly:
Fetching and tracking:
jj git fetch --all-remotesjj bookmark track <name>@<remote>jj bookmark untrack <name>@<remote>jj bookmark list (shows * for out-of-sync bookmarks)Pushing changes:
jj git push --bookmark <name>jj git push --alljj git push --trackedjj bookmark create <name> && jj git push --bookmark <name>Bookmark conflicts:
jj bookmark listjj bookmark set <name> -r <target>Effective jj session structure:
Starting work:
jj git fetchjj logjj new <base> or work on existing @During work:
jj describe -m "message"jj splitjj squashjj abandon <commit> or jj undoPreparing to push:
jj log -r 'main..@'jj describe -r <commits>jj bookmark set <name> -r @jj git push --bookmark <name>After mistakes:
jj undojj op logjj op restore <id>After working session, provide operation summary: jj op log --limit 20 to show recent operations.
This shows the actual work done, including undos and restores.
For commit-focused summary, use: jj log --limit 10 to show recent commits on current branch.
When sharing work done, combine both:
jj op log --limit N (where N covers session operations)jj log -r 'bookmark()..@' (commits not yet on any bookmark)Use explicit operation IDs from session start if you noted them, otherwise count backwards from @.
When .beads/ exists and an epic is active, the epic's issue dependency graph determines the jj bookmark chain topology.
Independent issues (no dependency path between them) form an antichain of parallel bookmark chains developed concurrently.
Dependent issues (blocking relations) produce chain stacking where one bookmark branches from another's tip, reflecting the covering relation in the partial order.
The diamond pattern has four phases: diverge (decompose epic into chains from bd epic status), develop (work in the development join), converge (validate the integrated development join), and serialize (dissolve the development join and rebase chains sequentially onto main as a linear extension of the dependency partial order).
The development join is the working-copy entity used in the develop and converge phases — see the "Development join" section below for the entity definition.
Integration to main always uses sequential rebase linearization, never merge commits.
For the full theoretical foundations (lattice theory, event structures, VSM mapping), beads-to-jj mapping table, and four-phase mechanical recipe, see diamond-workflow.md in this directory.
This section is the canonical entity-level reference for the development join: the multi-parent @ structure, conflict semantics, edit-route cycle, route-and-extend pattern, composite-maintenance invariant, and integration strategies at completion.
For the canonical process recipe — the four-phase diamond workflow (diverge, develop, converge, serialize) that connects a beads epic graph to jj chain topology — see diamond-workflow.md in this directory.
The development join is the canonical entity for parallel multi-chain work in jj mode and the default operating mode for any session with two or more active chains. This applies to every set of active parallel parent chains, regardless of where the parallelism originated: cross-mission coordination across sessions, cross-agent coordination within a team, and within-mission decomposition of a single epic or task into N independent streams all converge on the same entity. Whenever a session has decomposed work into two or more streams that need to integrate, the development join is the operative surface — there is no separate "in-mission" structure that competes with it.
Sibling chains rooted directly off main without a shared join are an antipattern in this mode and require affirmative justification. The justifying case is narrow: genuinely unrelated experiments that have no integration intent and whose conflict surface is uninteresting to observe. Anything that will eventually merge, share validation, or be reviewed as a unit belongs in a development join from the moment the second chain is created. Single-chain mode is the remaining exception, reserved for ad hoc work on one anonymous chain descending from main.
Definition: a two-commit structure consisting of a multi-parent [merge] commit (cardinality ≥ 2, each parent a chain tip — a bookmark or an anonymous chain head) and a [wip] commit on top where @ resides.
The active chain tips form an antichain (a set of mutually independent commits in the partial order).
[merge] is frozen at creation and never edited; [wip] is ephemeral scratch space where in-flight edits land — forming the join + wip structure documented below.
Structure: [merge] is created by jj new <bookmark-a> <bookmark-b> [...] and described once with the state-based convention join N=<cardinality>: <alphabetical, comma-separated parent chain bookmarks> so it is never auto-abandoned and its description self-declares the current parent set.
[wip] is created by jj new @ on top of [merge], and @ always points at [wip] while routing operations preserve it via --keep-emptied.
This structure provides continuous integration feedback (conflicts surface immediately as first-class conflicts in @), shared visibility, modular separation (each chain remains independently inspectable, pushable, and reviewable), and flexible integration (chains are linearized onto main via sequential rebase at completion).
Conflict behavior: when antichain elements contain conflicting changes, @ displays first-class jj conflicts as a continuous integration signal — informational, non-blocking.
See "Conflict behavior in composite @" below for resolution options.
Lifecycle: created via jj new <bookmark-a> <bookmark-b> [...] -m "join N=<cardinality>: <alphabetical bookmarks>" followed by jj new @ -m "wip" when promoting from tier 2 to tier 3 (see tiered-ceremony.md); maintained via the edit-route cycle and route-and-extend pattern below, with the [merge] description rewritten in full whenever the parent set changes so it always declares the current state; dissolved during the four-phase diamond workflow's serialize phase, where chains are rebased sequentially onto main and fast-forwarded (see diamond-workflow.md).
Not to use for: workspace isolation needs.
The development join is the tier-3 mechanism for parallelizing related chains in one working copy.
For genuine filesystem isolation (e.g., concurrent unrelated experiments), jj workspace add is the explicit-request-only mechanism — see "Workspaces are not a tier" in tiered-ceremony.md.
Cross-references:
tiered-ceremony.md — when to enter tier 3 (the trigger for using a development join at all)diamond-workflow.md — the four-phase process (diverge, develop, converge, serialize) in which the development join participates~/.claude/skills/preferences-git-version-control/03-jj-mode.md — mode-detection context and equivalences with git-native and GitButler modesThe development join always uses a canonical two-commit structure: a frozen multi-parent [merge] commit with an ephemeral [wip] commit on top, where @ is [wip].
parents... → [merge] (FROZEN, multi-parent, "join N=<cardinality>: ..." description)
|
└→ [wip] (@, working copy, ephemeral description)
Per Krycho's canonical model, [wip] sits on top of [merge] precisely so that [merge] is never edited after creation and [wip] serves as scratch space whose description need not be maintained.
Reference: Chris Krycho, "Jujutsu Megamerges and jj absorb" (2024-12-24); local cache: docs/notes/development/version-control/references/krycho-jujutsu-megamerges-and-jj-absorb.md.
The [merge] commit is created by jj new <bookmark-a> <bookmark-b> [...] and described once at creation following the state-based convention join N=<cardinality>: <alphabetical, comma-separated parent chain bookmarks> (for unbookmarked parents, use the short change_id wrapped in backticks).
The description thereby self-declares the current join state from its own text, so the reader knows the full parent set without inspecting the graph:
join N=3: bookmark-a, bookmark-b, bookmark-c
A join with an unbookmarked parent renders as join N=3: bookmark-a, bookmark-b, xqnqupun``.
The history of join modifications (extensions, parent removals) is preserved in jj op log; the description records the current state, not the event that produced it.
This makes the convention robust against [merge] orphan abandonment and verifiable as an invariant against jj log -r @- -T 'parents...'.
After creating [merge], immediately create [wip] on top with jj new @ -m "wip" (or any ephemeral description); this becomes @ where all edits land.
The [merge] commit is FROZEN once created — it is never described, edited, or routed into.
The [wip] commit's description is ephemeral and does not need to be recovered after routing operations.
Squashing from @ into chain elements with --keep-emptied auto-rebases both [merge] and [wip] while preserving the two-commit structure.
If [wip] is disrupted, the [merge] commit still exists — recover with jj new <merge-change-id> to recreate the wip layer.
The development join is structurally correct iff all six of the following invariants hold simultaneously. They are stated as a numbered list so individual invariants can be referenced unambiguously elsewhere in the skill tree.
(i) chain ∈ join's parents — every active chain bookmark is a parent of [merge].
A bookmark whose tip is not in parents([merge]) is an orphaned chain: its content is invisible to [wip] and absent from any integrated validation run on the development join.
(ii) join parents = current bookmark targets — there is no staleness between [merge]'s parent revisions and the current targets of the chain bookmarks named in [merge]'s description.
Auto-rebase normally maintains this invariant in place; when jj rebase -r <merge> is used deliberately (e.g., the chain-creation-mid-diamond recipe), the required successor jj rebase -r <wip> -d <merge> keeps [wip] attached — see "Re-attaching [wip] after jj rebase -r <merge>" below.
(iii) @ atop the join — @ is at [wip] whose sole parent is [merge], or @ IS [merge] during construction.
This is the maintenance invariant historically named in this section; the other four invariants are now peer to it.
(iii-b) @ is never drifted off [wip] by an @-mutating verb.
In development-join mode @ is ALWAYS the empty [wip] commit directly atop the frozen multi-parent [merge], and every editor — human or LLM agent — edits THAT SAME shared [wip], then routes each change DOWNWARD into the correct chain.
The shared [wip] is the stable coordination point that makes N concurrent editors safe by construction.
If @ drifts (e.g. is relocated below the join), the shared editing surface other actors are concurrently writing vanishes; in this repo it also DRAGS the pushed wip deploy bookmark (machines rebuild from it) and breaks the one-child join invariant (vi).
Two @-mutating verbs are therefore PROHIBITED while a development join is present:
jj describe @ into a content commit — this consumes the empty [wip].@ below the join via the positional rebase forms jj rebase -r @ --insert-before <target> / --insert-after <target> (nor the -A/-B aliases), nor jj rebase --revisions @ --insert-before/--insert-after <target> — these drop @ into the chain/splice interior.All content leaves @ by routing DOWNWARD with @ left in place and empty, via these editor-safe verbs:
jj absorb (auto-distribute by blame; scoped jj absorb <path> under concurrency);jj squash --from @ --into <chain-tip> --keep-emptied (amend-route; omit -m to preserve the tip description);jj squash --from @ --insert-after <chain-tip> -m "msg" --keep-emptied [-- <paths>] (append-route; advance the bookmark to the printed Created new commit <id>);jj squash --from @ --insert-before 'children(fork_point(parents(<join>))) & ::<join>' -m "msg" --keep-emptied -- <paths> (splice-below-join from live @);jj split keeping the wip remainder.The ONLY sanctioned jj rebase touching @ is the DESTINATION form that re-anchors [wip] onto a rebuilt multi-parent join when adding or removing a chain — jj rebase -r @ -d 'all:(@- | new-bookmark)' / jj rebase -r @ -d 'all:(@- ~ removed-bookmark)' (see §"Adding and removing chains").
That form keeps @ an empty direct child of the join and so does not drift it; it is distinct from the prohibited positional --insert-before/--insert-after forms above.
In every splice/relocation recipe the relocated <commit>/<X>/<range> is a SEPARATE, already-sealed NON-wip commit, never @/[wip] itself.
To relocate content that is still live in @, never jj describe @ then jj rebase --revisions @ --insert-before <target> (that opens a window with NO [wip] on the join, catastrophic under concurrency); use the jj squash --from @ --insert-before … --keep-emptied -- <paths> route above, which never moves @.
Every commit-boundary verb below carries an explicit -m (or is description-merge-free), so none opens an interactive editor.
None moves @; they supersede any rebase-of-@.
All assume @ is the empty [wip] directly atop the multi-parent [merge].
Amend-route (fixup into the existing chain tip; -m OMITTED to preserve the tip description; non-interactive-safe because the empty wip carries no description so the description-merge editor never fires):
jj squash --from @ --into <chain-tip> --keep-emptied [-- <paths>]
Append-route (land a NEW atomic commit on a chain; advance the bookmark to the printed Created new commit id):
SQUASH_OUT=$(jj squash --from @ --insert-after <chain-tip> -m "feat(scope): description" --keep-emptied -- <paths>)
NEW_ID=$(echo "$SQUASH_OUT" | sed -n 's/^Created new commit \([a-z][a-z0-9]*\) .*/\1/p')
jj bookmark move <chain> --to "$NEW_ID"
Splice-below-join from live @ (route a <base>-bound change DOWN into the splice region without ever moving @; this is the correct mechanic for the @-origin case, replacing any by-relocation rebase-of-@):
PAGER=cat jj op log -n 1 # note <OP0> for rollback
jj squash --from @ --insert-before 'children(fork_point(parents(<join>))) & ::<join>' \
-m "fix(scope): description" --keep-emptied -- <paths>
PAGER=cat jj log -r 'present(@) | ancestors(immutable_heads().., 2) | trunk()' # verify @ stays empty [wip] atop the join
# Rollback on failure: jj op restore <OP0>
Absorb-route (auto-distribute @'s diff to blame-closest ancestors; preserves [wip] without --keep-emptied; prefer the scoped form under concurrency):
PAGER=cat jj absorb [<path>]
Split keeping the wip (extract a subset into a new commit, leaving an empty [wip] remainder at @; pass explicit paths + -m to avoid the interactive TUI hang; do NOT pre-stage by describing @ in a join):
jj split -r <chain-commit> -- <paths> -m "msg"
By-relocation (ONLY for a SEPARATE, already-sealed NON-wip commit that already exists above the join; <commit> MUST NOT be @/[wip]; never jj describe @ then relocate):
jj rebase --revisions <separate-sealed-non-wip-commit> --insert-before 'children(fork_point(parents(<join>))) & ::<join>'
Sanctioned destination-form rebase touching @ (add/remove a chain; re-anchors the empty @ onto the rebuilt multi-parent join; the all: prefix forces multi-parent; this is the ONLY jj rebase that may name @ and it does NOT drift @):
jj rebase -r @ -d 'all:(@- | new-bookmark)' # add chain
jj rebase -r @ -d 'all:(@- ~ removed-bookmark)' # remove chain
# the two-commit [merge]+[wip] model instead operates on the frozen [merge] then re-attaches:
jj rebase -r <merge> -d 'all:(<existing-parents> | new-bookmark)' && jj rebase -r <wip> -d <merge>
PROHIBITED (drifts @ off [wip]; the catastrophic defect class):
jj describe @ ... # consumes the wip into content
jj rebase -r @ --insert-before/--insert-after <target> # positional relocation below/into the join
jj rebase --revisions @ --insert-before/--insert-after <target>
(iv) wip holds integrated working tree — [wip] is where edits land; its working tree reflects the union of all chain contents.
Parallel agents observing [wip] see the integrated state of every chain in the join, which is the primary value proposition of the entity.
(v) append-not-squash for chain routing — chains are extended via new commits (the route-and-extend recipe below) rather than by amending existing bookmark commits. Conflating extension with amendment collapses the chain's commit-level history and breaks the per-issue review granularity the diamond workflow exists to provide.
(vi) [merge] has a single [wip] on top — there is exactly one ephemeral working-copy commit as immediate descendant of [merge].
Multiple sibling [wip]s as children of [merge] violate this invariant: they partition the working surface and break the contract — explicit in the join + wip structure above and in Krycho's canonical model — that edits land in [wip] precisely so [merge] stays frozen as the canonical join representation.
Per-stream wips (one [wip] per parent chain) are the recurring antipattern: they re-introduce the per-chain working surfaces that the single shared [wip] exists to replace, and they hide cross-chain conflicts that the integrated [wip] would have surfaced immediately.
The canonical routing primitives that preserve this invariant are the append-route (jj squash --from @ --insert-after <chain-tip> -m "msg" --keep-emptied followed by jj bookmark move <chain> --to <new-commit-id>, where <new-commit-id> is the change ID jj prints in its Created new commit <id> line) for landing new atomic commits on a chain, and the amend-route (jj squash --from @ --into <chain-tip> --keep-emptied, with -m omitted) for fixups against the existing tip; see "Routing to a chain: append vs amend" under §"The edit-route cycle" below.
Invariant (iii) above is the maintenance invariant: the join + wip structure requires active maintenance when operations move @ away from [wip].
Before any operation that moves @ (like jj new <single-parent> or jj edit), verify and record [merge]'s change ID.
After any such operation, immediately restore [wip] on top: jj new <merge-change-id> -m "wip".
When adding a new bookmark to the development join, reconstruct [merge] with all parents including the new one (re-set the description to the new join N=<cardinality>: <alphabetical bookmarks> state), then recreate [wip] on top.
Subagent prompts must specify whether they operate in [wip] (edit files, let orchestrator route) or outside it (e.g., working on a single chain directly).
The invariants above describe the diamond's idle state — when @ is empty [wip] directly above the join and no chain extension or splice authoring is in progress.
During mid-operation states the strict invariants are transiently relaxed:
jj new --insert-after <chain-tip> for the route-and-extend single- or multi-commit-range form, or via jj edit <chain-commit> for in-place amendment of an earlier chain commit at any depth): @ sits anywhere in the mutable diamond interior — any mutable ancestor of the join excluding the join itself, covering chain tips, mid-chain commits, chain roots, and splice-region commits.
The chain bookmark has not yet been advanced (in the append case) or the chain's history is mid-rewrite (in the edit case), so the join's parent set briefly disagrees with the bookmark set declared in the join's description.jj new --insert-before 'children(fork_point(parents(<join>))) & ::<join>'): @ sits in a linear non-merge stack above the join during authoring.The verify-diamond-before-edit PreToolUse hook recognizes four valid @ positions corresponding to these states:
| Case | Position | Workflow state |
|---|---|---|
| (A) | @ IS the join | construction-time, before adding [wip] |
| (B) | @ is a direct child of the join | idle wip |
| (C) | @ is in a linear non-merge stack above the join | splice-by-construction in-progress; stack-above-join awaiting splice/route |
| (D) | @ is anywhere in the mutable diamond interior — any chain commit at any depth (tip, mid-chain, root) or any splice-region commit | Covers: route-and-extend in-progress (case D was previously narrowly defined); jj edit <chain-commit> for in-place edits at any depth; jj edit <splice-region-commit> for splice-region fixups. |
The unified case (D) formulation supersedes a previous narrower definition restricted to descendants of a chain tip.
The earlier definition missed two important sub-scenarios: mid-chain or chain-root editing via jj edit <chain-commit> (to amend an earlier chain commit in place rather than appending a new one), and splice-region editing via jj edit <splice-region-commit> (to fix up a commit inside an in-progress splice-below-join stack).
The unified formulation handles all three sub-scenarios uniformly because the topological notion — "@ is working in the interior of the diamond, i.e. it is a mutable ancestor of the join that is not the join itself" — is the same regardless of whether @ reached that position via jj new --insert-after, jj edit, or any other @-moving operation.
Checks (i)/(ii) — bookmark-vs-parent consistency — run only in cases (A) and (B), since cases (C) and (D) by construction produce a transient bookmark/parent mismatch that the in-progress operation reconciles when it advances the relevant bookmark.
The hook fires ask (never deny) when @ is in none of these four positions — typically when work has been routed onto an unrelated branch, when an unintended merge has been introduced, or when the working copy has drifted off the diamond entirely.
The recovery hint depends on intent: return to idle via jj new <join-change-id> -m "wip", or resume in-chain work via jj edit <chain-tip-change-id>.
In particular, @ relocated BELOW the join is outside all four cases and is exactly the drift that jj describe @ + a positional jj rebase --revisions @ --insert-before/--insert-after produces — see invariant (iii-b).
Recover via jj op restore <pre-op> rather than trying to re-derive position.
See modules/home/tools/hooks/verify-diamond-before-edit.sh for the enforcement implementation.
A single revset surfaces all six invariants in one view, suitable for an initial orientation pass or a mid-session health check:
jj log -r 'present(@) | ancestors(immutable_heads().., 2) | trunk()'
Reading the output against the invariants:
@ shown with a single parent line up to [wip] confirms invariant (iii); a divergent @ away from [wip] indicates the maintenance step was skipped after a @-moving operation.[merge] commit with description join N=k: <bookmarks> confirms invariant (i) when the declared bookmarks match the actual parent bookmarks shown in the graph; a mismatch indicates an orphaned chain or a stale description.[merge] confirm invariant (ii); a bookmark drawn one or more commits above its corresponding [merge] parent indicates parent-set staleness (the bookmark has advanced but [merge] has not).jj diff @ against the union of chain tips confirms invariant (iv); discrepancies indicate routing operations that bypassed [wip] or a disrupted [wip] recreation.jj log -r 'main..<bookmark>' confirms invariant (v) when the chain shows incremental commits rather than a single amended bookmark commit.jj log -r '<merge-change-id>+' confirms invariant (vi) when it returns exactly one commit ([wip]); two or more rows indicate sibling per-stream wips and require collapsing back to a single shared [wip] before resuming routing.While [wip] (the working-copy commit above the development join) presents an integrated view of all chains' modifications, editing a file there commits a new modification that must be routed to one chain — and that choice interacts with whichever other chains have already modified the same file.
A development join whose parent chain tips form an antichain in the commit poset guarantees that the chains are pairwise mergeable at the commit level; it does NOT guarantee that further modifications routed to one chain will compose cleanly with modifications another chain has already applied to the same file region.
Before any edit to a file in [wip], run a cross-chain file-collision reconnaissance query:
PAGER=cat jj log -r 'fork_point(parents(@-))..@- & files("<relative-path>")' \
--no-graph -T 'change_id.short() ++ " " ++ bookmarks ++ " " ++ description.first_line() ++ "\n"'
The revset selects commits in the half-open interval meet..join between the meet (fork_point(parents(@-)) — the greatest common ancestor of the antichain formed by [merge]'s parents; note that fork_point() of a single commit is a no-op per upstream docs/revsets.md:349-353, so parents(@-) must be applied to obtain the N-element antichain before computing the meet) and the join (@- — [merge] itself).
& files("<path>") restricts to commits that modified the named file.
For multi-file queries, prefer the fileset union form inside one call: files("a | b") (per upstream's docs/filesets.md), over the revset-level union files("a") | files("b").
Output interpretation:
| Result | Meaning | Routing implication |
|---|---|---|
| Zero rows | No chain has touched the file | Route to the semantically appropriate chain; choice unconstrained by collision |
| Rows from exactly one chain | One chain owns prior touchpoints | Route the new change to that chain via append-route, amend-route, or absorb-route (see §"Routing to a chain") |
| Rows from two or more chains | Cross-chain file collision exists | STOP. Apply one of the three resolution patterns documented in the reference_jj-diamond-cross-chain-file-collision memory before proceeding. |
The reconnaissance has constant cost (one jj log invocation) regardless of diamond size, and prevents structural conflicts at [merge] that would otherwise surface during Phase 4 serialize and require post-hoc resolution.
The same query applies at chain creation: before issuing the chain-creation-mid-diamond recipe (diamond-workflow.md:161-190) to introduce a new chain into an active diamond, run the reconnaissance against the new chain's planned file scope.
If a collision exists, either route the planned work into the existing chain that already owns those touchpoints (no new chain needed) or apply the collision-resolution patterns from reference_jj-diamond-cross-chain-file-collision before proceeding with chain creation.
The same file-collision check appears as a precondition of the splice-below-join by-relocation arm — see §"Splice-below-join" → Precondition: relocation file-disjointness — where the check is applied to a relocation set rather than a forthcoming edit. Both consumers operate on the same underlying question ("which chains touch which files?") and the same revset machinery; the splice-below-join consumer adds the alternative-on-collision options (route-and-extend, new-chain creation, defer to Phase 4 serialize) when the check fails.
[merge]The development join's [merge] commit IS the join (∨, least upper bound) of its parent antichain in the commit poset.
This join exists if and only if all parents are pairwise mergeable.
Cross-chain file-collision reconnaissance is the operational check that this mergeability holds with respect to the specific file under edit before the edit creates a new modification.
When known concurrent agent activity exists on a development join — the user has flagged another session as in-progress, or jj op log shows recent ops from an unfamiliar source — verify chain state IMMEDIATELY before each chain-touching dispatch (not just at design time) and serialize ordering with the other agent explicitly. The pre-edit recon above catches different-FILE collisions across chains; this catches concurrent-AGENT mutations against the same chain, where two agents independently issue jj squash --insert-after <tip> in overlapping windows and produce divergent @ and [merge] change IDs. Recovery is mechanical (jj edit <survivor-commit-hash> to retarget @, then jj abandon <stale-wip-hash> <stale-merge-hash> using commit hashes to disambiguate across divergence) but pause-and-serialize prevents the failure altogether.
All edits land in @ (which is [wip]).
The discipline is to route each completed change from @ into the correct chain commit, preserving [wip] empty on top of the frozen [merge].
Each route from [wip] to a chain X is one of two semantically distinct operations, and the right recipe depends on intent.
The default for landing new atomic work is the append-route: the edit-set becomes a NEW commit on chain X, the chain grows by one commit, and X's bookmark advances to the new tip.
The amend-route is reserved for fixups against the SAME commit already at the chain's tip — correcting a typo, adding a missed file, or otherwise refining the existing tip commit in place.
Conflating the two collapses per-issue history and overwrites descriptions silently; the two recipes are not interchangeable.
Append-route (default for atomic landing):
SQUASH_OUT=$(jj squash --from @ --insert-after <chain-tip> -m "msg" --keep-emptied -- <paths>)
echo "$SQUASH_OUT"
NEW_ID=$(echo "$SQUASH_OUT" | sed -n 's/^Created new commit \([a-z][a-z0-9]*\) .*/\1/p')
jj bookmark move <chain> --to "$NEW_ID"
The --insert-after (alias -A) flag is what makes this an append rather than an amend; per the EXPERIMENTAL FEATURES doc comment at cli/src/commands/squash.rs:51-84, -o/-A/-B switch jj squash into create-a-new-commit mode rather than merging into an existing target.
@ ([wip]) returns to empty atop the auto-rebuilt [merge], so the join + wip structure is preserved across the route.
The bookmark-move is a separate explicit step: jj does not auto-advance a bookmark onto a newly inserted commit, so omitting it leaves the bookmark pointing at the prior tip.
Use the change ID surfaced in the Created new commit <id> line that jj squash --insert-after prints, not @-, as the bookmark-move target.
In a multi-parent development join, @- resolves to [merge] after the squash because the new commit becomes one of [merge]'s parents (and [wip] is rebased onto the rebuilt [merge]), not a direct ancestor of @.
Aiming the bookmark-move at @- therefore advances <chain> onto [merge], requiring a corrective jj bookmark move <chain> --to <correct-id> --allow-backwards.
Revset-based capture also returns the wrong target: heads(::<chain>) and parents(<merge>) both resolve to the chain's prior tip (the bookmark's previous target), not the newly inserted commit, because the new commit is structurally a sibling-then-rebased-parent of [merge] rather than a descendant of the bookmark's prior position. Always parse the stdout line.
Amend-route (fixups only):
jj squash --from @ --into <chain-tip> --keep-emptied
Omit -m here so the chain-tip's existing description is preserved; adding -m to the amend-route OVERWRITES the chain-tip description in place.
Use this form only when the intent is genuinely to refine the existing tip commit, never to land a new logical change.
The most common failure mode is running the amend-route N times with N different -m strings, expecting N commits to appear on the chain: that sequence instead accumulates N diffs into the same chain-tip commit and overwrites the description N times, yielding one commit with the last message and a conflated diff.
If N atomic landings are intended, run the append-route N times.
A third flavor, absorb-route, uses jj absorb instead of explicit-target jj squash.
Krycho's article Jujutsu Megamerges and jj absorb (https://v5.chriskrycho.com/journal/jujutsu-megamerges-and-jj-absorb/) establishes absorb as the preferred verb when ownership is unambiguous: absorb examines blame and routes each change in [wip] to the closest mutable ancestor that last modified the same lines.
When the pre-edit reconnaissance has confirmed exactly-one-chain ownership for every file in [wip], absorb is safer than manual squash because it refuses to act when ambiguity would force a choice ("if it is not truly unambiguous… it will choose not to do anything at all").
# Absorb-route: auto-distribute changes in @ to their semantic homes by blame ancestry
PAGER=cat jj absorb
Use absorb-route when: pre-edit recon returned exactly-one-chain rows for every file modified in this [wip] cycle, AND blame ancestry will resolve each change unambiguously to a single chain commit.
Fall back to append-route or amend-route when: any file modified has zero rows (no chain owns it yet — absorb has nowhere to route) or multiple-chain rows (collision — manual decision required).
Across both recipes, three flags are load-bearing.
--from <source> is explicit source selection; a bare --into is a no-op when @ is empty, so the flag is required to express intent unambiguously.
-m "..." supplies the commit message inline and is mandatory in agent setups without a TTY (see the top-of-skill note on non-interactive execution) — but in the amend-route it must be omitted to preserve the tip's existing description.
--keep-emptied preserves @'s presence as [wip] across the route; without it, an empty source is abandoned and the join + wip structure is disrupted.
When amending an existing chain commit, the canonical routing operation is jj squash --from @ --into <chain-tip> --keep-emptied.
--keep-emptied preserves the empty [wip] commit after its diff is squashed into the target, maintaining the canonical two-commit structure.
[merge] is never touched by any routing operation.
[wip]'s description is ephemeral, so no description-recovery step is required after the squash.
The cycle proceeds as follows:
@ (the [wip] commit)jj squash --from @ --into <chain-tip> --keep-emptied — routes the diff into the chain commit, preserving [wip]jj log — verify the change landed in the correct chain and [wip] is emptyjj absorb is the auto-routing variant.
It distributes hunks to the closest mutable ancestor based on blame ancestry and automatically preserves [wip] without requiring --keep-emptied.
In parallel environments where multiple agents share @, prefer scoped jj absorb <path> over bare jj absorb.
Bare absorb touches every changed file in @, which can interfere with files another agent is mid-edit on.
Scoped absorb routes only the specified files by blame ancestry, leaving everything else in [wip] untouched.
The invariant is that [wip] is always empty or contains only in-progress work, and [merge] is never edited.
All completed changes live in their respective chain commits.
In single-chain mode (tier 1, no bookmarks), the cycle is simpler: jj describe -m "message" followed by jj new freezes the change and advances @.
There is no routing target, so the single-command pattern does not apply.
Do not use jj new (without -A) in multi-parent development join mode — it creates a new change descending from [wip] rather than routing to a chain.
When the intent is to create a new commit on a chain rather than amending the existing tip, jj squash --into against the existing tip is insufficient because it merges content into that commit.
Use the route-and-extend pattern instead.
The complete mechanical recipe:
# 1. Insert a new empty commit after the chain tip (does NOT move @)
jj new -A <chain-tip> --no-edit -m "feat: description of the new change"
# 2. Note the change ID of the newly inserted commit (jj prints it)
# 3. Squash the file(s) from @ into the new commit, preserving [wip] empty on top
jj squash --from @ --into <new-change-id> --keep-emptied -- <path>
# 4. Advance the bookmark to the new chain tip
jj bookmark move <bookmark> --to <new-change-id>
Why each step is necessary:
--no-edit to avoid moving @ away from [wip]. Using jj squash --into <chain-tip> instead would amend the existing chain commit, not extend the chain.--keep-emptied to preserve the empty [wip] commit on top of [merge] after the diff is moved into the new chain commit. [merge] is never touched.jj new -A creates a new commit that the bookmark does not automatically track. Without this step, the bookmark remains on the old tip.No description-recovery step is needed: [wip]'s description is ephemeral and [merge] is frozen.
When to use which pattern:
jj squash --from @ --into <chain-tip> --keep-emptied (the standard edit-route cycle) or jj absorb for auto-routing.Multi-commit-range form. When relocating an existing linear segment of N commits into a chain (rather than authoring a single new commit), use the range form:
Precondition: <range-start>::<range-end> must be a stack of already-sealed non-wip commits and must NOT include @/[wip].
The recipe relies on @ being a DESCENDANT of the range so auto-rebase restores @ to a direct child of the join; selecting <range-end> = @ would instead relocate @ off [wip] into the chain — the same @-drift class as the single-commit by-relocation arm.
If the content is still in @, route it down via the route-and-extend recipe (jj new -A <chain-tip> --no-edit -m "…" then jj squash --from @ --into <new-id> --keep-emptied) or the append-route (jj squash --from @ --insert-after <chain-tip> -m "msg" --keep-emptied -- <paths>) instead — both keep @ empty as [wip].
# Checkpoint and survey
PAGER=cat jj op log -n 1 # capture <OP0>
PAGER=cat jj log -r '<range-start>::<range-end>' --no-graph \
-T 'change_id.shortest(8) ++ " " ++ description.first_line() ++ "\n"'
# Expect N rows in linear order
# Rebase the entire range atomically after the chain tip
jj rebase --revisions '<range-start>::<range-end>' --insert-after <chain-tip>
# Advance the chain bookmark to the new tip (the range's last commit)
jj bookmark set <chain-bookmark> -r <range-end>
The --insert-after <chain-tip> semantics reparent the chain tip's other current children — the join's edge from this chain — onto the inserted range's tail, so the join automatically follows the extension.
The range's old descendants (typically @ if the range sat above the join) get reparented onto the range's old parent (the join itself), restoring @ to a direct child of the join.
Result: the chain extends by N commits in one atomic op-log entry; the other chains, the join's parent set elsewhere, and the working-copy [wip] position are not otherwise affected.
This form is the natural multi-commit generalization of the single-commit pattern above. The same precondition applies as for splice-below-join's by-relocation arm — see §"Splice-below-join" → Precondition: relocation file-disjointness — though file-level overlap between the relocation range and the chain's existing modifications is tolerable when the modifications occupy disjoint regions, since they compose linearly within the chain rather than via cross-chain merge resolution at the join.
@When antichain elements contain conflicting changes, @ displays first-class jj conflicts.
These conflicts are informational — they tell you the chains will conflict when merged.
You can resolve them in @ (the resolution stays in @ and may need re-resolution when parents change), continue working with conflict markers present, or resolve the underlying conflict in one of the chains directly.
Conflicts in @ do not prevent work.
They are a continuous integration signal, not a blocking error.
jj absorb scope and limitationsjj absorb works for modifications to existing lines by analyzing blame ancestry to determine which chain element last touched each modified line.
It routes changes automatically based on this analysis.
jj absorb can be scoped to specific files: jj absorb <path> routes only that file's changes by blame ancestry, leaving everything else in @ untouched.
This is useful when you want to auto-route changes for one file while continuing to work on others.
jj absorb does not work for:
For any case where jj absorb cannot route changes, fall back to jj squash --from @ --into <chain-tip> --keep-emptied -- <path> for explicit routing (or the route-and-extend recipe when extending the chain with a new commit).
Multiple agents share one filesystem and edit files in the same @ (which is [wip]).
This is the intended model.
All agents see the integrated state of all antichain elements, reducing conflict risk.
Conflicts between concurrent edits are detected immediately as first-class jj conflicts.
All agents route via jj squash --from @ --into <chain-tip> --keep-emptied -- <path> (or the route-and-extend recipe to extend a chain).
--keep-emptied preserves [wip] after the squash, maintaining the canonical two-commit structure across concurrent routing operations.
Because @=[wip] is the shared coordination point, NO agent may jj describe @, positionally jj rebase -r @/jj rebase --revisions @, or otherwise relocate @ below the join: doing so deletes the surface every other agent is concurrently writing and (in this repo) drags the pushed wip deploy bookmark.
Content only ever leaves @ by downward routing with --keep-emptied (see invariant (iii-b)).
Coordination protocol for parallel agents:
jj squash --from @ --into <chain-tip> --keep-emptied -- <path>jj log review to verify routing correctnessjj absorb as a fallback for batch routing when blame ancestry is clear (auto-preserves [wip])jj absorb <path> can separate them by blame ancestry after the factThe orchestrator routes changes to the correct chain via jj squash --from @ --into ... --keep-emptied or jj absorb after each subagent completes.
Subagent prompts specify which files to edit and the target chain context but do not include jj routing commands.
Add a chain to the development join @:
jj rebase -r @ -d 'all:(@- | new-bookmark)'
Remove a chain from the development join @:
jj rebase -r @ -d 'all:(@- ~ removed-bookmark)'
The all: prefix is required to ensure the revset resolves to multiple parents rather than collapsing to a single common ancestor.
Without all:, jj would compute the nearest common ancestor of the revset members, producing a single-parent @ instead of a multi-parent one.
This destination form is the ONE sanctioned jj rebase that names @: it re-anchors the empty @ onto a rebuilt multi-parent join, keeping @ a direct child of the join, so it does not drift @ below the join.
It is distinct from — and must not be confused with — the prohibited positional forms jj rebase -r @ --insert-before/--insert-after <target> and jj rebase --revisions @ --insert-before/--insert-after <target>, which drop @ into the chain/splice interior (see invariant (iii-b)).
For repos on the two-commit [merge]+[wip] model, prefer reconstructing the frozen [merge] with the new parent set and then recreating [wip] (per §"Composite maintenance invariant") rather than rebasing @:
# Add a chain: reconstruct [merge] with the expanded parent set, then recreate [wip].
jj new <existing-parent-bookmarks...> new-bookmark -m "join N=<k+1>: <alphabetical bookmarks>"
jj new @ -m "wip"
When mid-diamond work surfaces a <base>-bound commit — hotfix, formatting, config tweak, dependency bump — that belongs on <base> below all chains, splice it into the base-to-join interval.
The accumulated splice region fast-forwards <base> independently of when the diamond's chains land.
A diamond's interior is <base>..<join> — the half-open interval between the base bookmark and the development join.
The bottom of the chains is the antichain of chain roots — the direct children of the splice tip (or <base> when the splice region is empty) that ancestor <join>.
The canonical revset is children(fork_point(parents(<join>))) & ::<join>.
The splice-below-join operation inserts new commit(s) between this antichain and whatever sits immediately below it (splice tip or <base>).
The diamond shape is preserved: every chain bookmark stays at its tip, the join's parent set is unchanged, @ ([wip]) remains atop the join.
The fork_point form is invariant under splice-region state.
When the splice region is empty, fork_point(parents(<join>)) equals <base>, so the expression reduces to children(<base>) & ::<join> — equivalent to roots(<base>..<join>) in that special case.
When the splice region is non-empty, fork_point(parents(<join>)) equals the splice tip, so the expression evaluates to children(<splice-tip>) & ::<join> — still the chain roots, not the splice root.
Repeated splice-below-join operations therefore always insert at the top of the splice region, preserving chronological order in the eventual <base> history.
Precondition: relocation file-disjointness. Before invoking the by-relocation arm, verify the relocation set's modified files are disjoint from any chain's modified files. Skill files, configuration aggregators, and other shared-edit targets — the "aggregator files" called out in §"Pre-edit cross-chain file-collision reconnaissance" — frequently violate this precondition. Probe:
PAGER=cat jj diff --name-only -r '<relocation-set>'
PAGER=cat jj diff --name-only -r 'fork_point(parents(<join>))..<chain-tip>' # repeat per chain
# Require empty intersection between the relocation set's files and each chain's files.
Violation produces cascading conflicts on rebase: one conflicted commit per chain that touches a relocation-set file, propagating through descendants to the join. On collision, three alternatives apply:
diamond-workflow.md §"Phase 2: develop" → "Chain creation mid-diamond").
The set becomes its own chain; the join expands to N+1 parents.
Best when the relocation set is semantically independent of every existing chain and the splice would otherwise force domain-incoherent commit history.The by-construction arm bypasses this precondition mechanically — the commit doesn't exist until after the position is chosen — but the author should still check whether the intended files are touched by any chain. If so, prefer route-and-extend or new-chain-creation over by-construction.
By-construction arm — when authoring a new <base>-bound commit:
jj new --insert-before 'children(fork_point(parents(<join>))) & ::<join>' -m "fix(scope): description"
# @ is now splice-positioned, at the top of the splice region; edit files (auto-snapshotted into the splice commit)
jj new # return @ to [wip] atop the diamond, or remain in the splice commit to extend it
By-relocation arm — when a <base>-bound commit already exists above the join (commonly because @ was the working position when the commit was sealed):
Precondition — <commit> MUST be a separate, already-sealed non-wip commit stacked above the join; NEVER @/[wip] itself.
The by-relocation arm uses jj rebase --revisions <commit>, which MOVES the named commit.
If <commit> were @, this drifts @ off [wip], opens a window with NO [wip] on the join (catastrophic under concurrent editors), and drags the pushed wip deploy bookmark (machines rebuild from it).
If the base-bound change is still in @ (authored in [wip], not yet routed), DO NOT seal-then-relocate (jj describe @ then jj rebase --revisions @ … is the prohibited drift) — use the by-route-from-wip arm below instead.
# Checkpoint and survey the antichain target
PAGER=cat jj op log -n 1 # note <OP0> for rollback
PAGER=cat jj log -r 'children(fork_point(parents(<join>))) & ::<join>' --no-graph \
-T 'change_id.shortest(8) ++ " bm=[" ++ bookmarks ++ "] " ++ description.first_line() ++ "\n"'
# Expect N rows — one per chain in the diamond
jj rebase --revisions <commit> --insert-before 'children(fork_point(parents(<join>))) & ::<join>'
# Verify diamond invariants post-splice
PAGER=cat jj log -r 'present(@) | ancestors(immutable_heads().., 2) | trunk()'
PAGER=cat jj bookmark list -r 'parents(@-) ~ trunk()' # expect N chain bookmarks unchanged
# Rollback if any verification fails: jj op restore <OP0>
By-route-from-wip arm — when the base-bound change is currently still in @/[wip] (authored but not yet routed).
Routes the diff DOWN into the splice region without ever moving @:
PAGER=cat jj op log -n 1 # note <OP0> for rollback
jj squash --from @ --insert-before 'children(fork_point(parents(<join>))) & ::<join>' \
-m "fix(scope): description" --keep-emptied -- <paths>
# @ stays at [wip] (empty) atop the join; the diff lands as a new commit in the splice region.
# Explicit -m avoids any interactive $EDITOR (non-interactive-safe).
# Verify: PAGER=cat jj log -r 'present(@) | ancestors(immutable_heads().., 2) | trunk()'
# Rollback on failure: jj op restore <OP0>
Use this arm, not by-relocation, whenever the change originates in @.
The revset children(fork_point(parents(<join>))) & ::<join> is the order-theoretically precise name for the chain-roots antichain.
It generalizes across diamond cardinality (2-way, N-way), is invariant under remote bookmark drift (origin-advance commits descend from <base> but do not reach <join>, so they are excluded), and resolves to the chain roots regardless of splice region state (empty or non-empty) — preserving chronological order in the splice region across repeated operations.
Anti-patterns:
--insert-after <base> fails when <base>@origin is ahead of local <base>.
The --insert-after semantics reparent every current child of <base> onto the source — including the immutable origin-advance lineage.
jj refuses with Commit <id> is immutable.
Use --insert-before against the antichain instead, which touches only the chain-root edges.--insert-before <one-chain-root> reparents only one chain.
The join then merges N parents with inconsistent bases (one below the new commit, N-1 still directly above <base>), silently desynchronizing the diamond.
Always use a revset spanning all chain roots: children(fork_point(parents(<join>))) & ::<join>.jj rebase -r <X> -d <base> (destination form) leaves the source as a sibling of the chain roots, not above them.
The chain roots remain children of <base>; the source has no relationship to the diamond.
Wrong topology.Invariants preserved.
Every chain bookmark resolves to the same chain tip (commit ids unchanged in by-construction arm; chain roots and descendants rewritten in by-relocation arm via standard auto-rebase).
<join> retains its N-parent shape.
@ retains its [wip] empty status.
The base bookmark is not advanced — fast-forwarding <base> to incorporate the splice region is a separate, deliberate step (see §Diamond integration on remote advance for the related operation when the remote has moved).
[wip] after jj rebase -r <merge>jj rebase -r <merge> and jj rebase -r <wip> -d <merge> form a required tool-pair.
The first reparents [merge]'s parent set in place; because the -r form's semantics are to reparent the named commit's parents while structurally reparenting its descendants away from it, the second is needed to bring [wip] back onto the rebuilt [merge].
Whenever the first verb is issued, the second is its required successor, immediately, in the same operation sequence — this is the canonical pairing, not an exception.
The route-and-extend recipe (SKILL.md §"Extending a chain with a new commit (route-and-extend pattern)") does not use this verb at all: it composes jj new -A <chain-tip> --no-edit with jj squash --from @ --into <new-id> --keep-emptied, and jj's auto-rebase updates [merge] and re-attaches [wip] cleanly without operator intervention.
Neither half of the pair is needed there.
The chain-creation-mid-diamond recipe (diamond-workflow.md §"Chain creation mid-diamond") deliberately uses jj rebase -r <merge> to grow the parent set in place, so both halves of the pair are mandatory and both appear in that recipe.
If only the first half ran, [wip] is left at the old parent set: the diamond-health diagnostic surfaces this as @ shown with multiple direct parent connectors instead of a single line into [wip].
Repair by issuing the second half: jj rebase -r <wip-change-id> -d <merge-change-id>.
When the broken-half was the immediately-preceding operation, jj op restore <id> is also available to roll back and re-execute the sequence cleanly.
To abandon the development join (dissolve the composite) and collapse back to a single-parent @, either iteratively remove parents using the removal command above, or reset directly:
jj new <single-bookmark>
This creates a fresh @ descending from only the specified bookmark.
When <base>@origin has advanced past local <base> while diamond work is in progress, integrate the new remote commits into the diamond before continuing.
This is distinct from §Integration strategies at completion (Phase 4 serialize): the operation here rebases an in-progress diamond onto a moved remote, not the completion-time linearization of chains for submission.
What jj git fetch does automatically (per lib/src/git.rs in upstream jj-vcs/jj):
<base> tracks <base>@origin, a 3-way merge auto-advances local <base> to the new remote tip.set_rewritten_commit, propagating standard rewrite-tracking auto-rebase to descendants.What fetch does not handle in the diamond-on-old-base case.
The diamond's chain roots are parented to the old <base> position.
After fetch, that position is still reachable (pinned by the chain roots), so it is not abandoned.
The new remote-advance commits have change IDs jj has never seen, so no rewrite mapping is established.
Local <base> advances; chain roots do not move.
An explicit rebase is required.
Recipe:
jj git fetch
# Move the entire diamond (splice region if any, chain roots, chains, chain tips, join, @)
# from old <base> position onto new remote tip. Source = antichain at the bottom of
# <base>@origin..@; destination = <base>@origin literally, which is invariant under
# whether auto-advance fired.
jj rebase --source 'roots(<base>@origin..@)' --destination '<base>@origin'
# Ensure local <base> matches remote (idempotent — no-op if fetch auto-advanced).
jj bookmark set <base> -r '<base>@origin'
# Verify
PAGER=cat jj log -r 'present(@) | ancestors(immutable_heads().., 2) | trunk()'
PAGER=cat jj bookmark list -r 'parents(@-) ~ trunk()'
Applies whether the splice region is empty or non-empty: roots(<base>@origin..@) resolves to the splice root when splice commits exist, or to the chain-root antichain when they do not.
The diamond's interior moves as one connected component; chain bookmarks point at the rewritten tips post-rebase.
The development join @ state persists across sessions.
When a new session detects an existing multi-parent @ (visible via jj log -r @ showing multiple parents), it should resume the development join workflow rather than starting fresh.
Run jj log -r '@-+' -s to identify the active chains and their bookmarks.
Check jj status and jj log -r 'mutable() ~ @ ~ ::main' to understand in-progress work before making changes.
The development join is ephemeral workspace scaffolding that is dissolved before integration. It does not appear in the final history on main.
The default integration strategy is sequential rebase linearization: rebase each chain onto main in dependency order, producing a purely linear history with no merge commits.
The canonical recipe is documented in full in diamond-workflow.md Phase 4 — that document is authoritative when this section and the diamond-workflow recipe diverge.
The summary here covers the mechanical steps in single-chain and multi-chain cases.
Sequential rebase linearization: dissolve the development join first by abandoning [wip] and [merge], then rebase chains sequentially in linearization order, fast-forwarding main to the tip via bookmark advance.
Dissolution-first is canonical: abandoning the multi-parent structure before rebase ensures each chain rebases against its actual base rather than the join.
Two cases determine the linearization order. When the chains form a true antichain (all issues are mutually independent), the integration order is discretionary: alphabetical, thematic, or by size. When issues have cross-chain dependency edges (issue A in chain 1 blocks issue B in chain 2), those edges induce a partial order on the chains themselves and the linearization must respect it: chains whose issues are depended upon by other chains rebase first. Independent chains within the same linearization step can be ordered discretionarily.
The ergonomic canonical rebase form is jj rebase -b <bookmark> -d <prev>, which rebases all commits reachable from the bookmark but not from the destination.
The -s <chain-base> -d <dest> form is equivalent but requires identifying the chain base first; prefer -b when the bookmark itself is the natural identifier.
The procedure generalizes to N chains:
# Dissolve the development join (canonical first step)
jj abandon <wip-change-id> <merge-change-id>
# Determine linearization order (dependent chains first)
# Chain A: main -> a1 -> a2 -> a3 (tip: chain-a bookmark)
# Chain B: main -> b1 -> b2 (tip: chain-b bookmark)
# Chain C: main -> c1 (tip: chain-c bookmark)
# Rebase A onto main (already there if it descends from main)
jj rebase -b chain-a -d main
# Rebase B onto A's tip
jj rebase -b chain-b -d chain-a
# Rebase C onto B's tip
jj rebase -b chain-c -d chain-b
# Result: main -> a1 -> a2 -> a3 -> b1 -> b2 -> c1
# Create the aggregate bookmark at the linearized tip
jj bookmark create <aggregate-bookmark> -r chain-c
The jj-linearize-join sibling tool performs the dissolution and sequential rebase steps with --dry-run, real-run, and embedded test subcommand modes.
For a single chain, this reduces to advancing main directly to the chain tip:
jj bookmark set main -r <chain-tip>
jj git push --bookmark main
This is the jj equivalent of fast-forward merge — advancing a bookmark creates no merge commits.
N+1 stacked-base PR submission (forge-driven exit): push N chain bookmarks plus one aggregate bookmark, then create N stacked-base chain PRs plus one aggregate PR targeting main, all initially draft.
The aggregate PR is the merge gate.
GitHub auto-closes a PR as MERGED when its head commit becomes reachable from the default branch regardless of the PR's specified base branch; advancing main to the aggregate tip therefore closes all N+1 PRs in one push.
The jj-stack-submit sibling tool performs this submission (push N+1 bookmarks via jj git push, create N stacked-base chain PRs + 1 aggregate PR via gh or tea, post a backlink comment on the aggregate, mark the aggregate ready).
The full post-merge recipe is three commands:
jj bookmark set main -r <aggregate-bookmark>
jj git push --remote origin --bookmark main
jj git fetch --tracked --remote origin # auto-deletes local bookmarks for branches GitHub deleted on merge
After integration, exit the development join by resetting @ to a single parent.
In forge-driven merge flows where main is not locally advanced ahead of the push, the canonical exit is jj new <aggregate-bookmark> rather than jj new main, because the local main bookmark may not yet reflect the remote state at the moment of exit.
The jj-linearize-join tool performs this exit step automatically.
In the secondary case where main was locally advanced before the push, jj new main is equivalent.
Individual chain bookmarks can be deleted in the post-session cleanup (or are auto-deleted by jj git fetch --tracked when the corresponding GitHub branches were deleted on merge).
Separate PRs (legacy): push each chain's bookmark independently for review before linearizing.
Push all at once: jj git push --bookmark chain-a --bookmark chain-b --bookmark chain-c.
Or push one at a time: jj git push --bookmark chain-a.
Each pushed bookmark becomes a branch on the remote, suitable for PR creation via gh pr create.
This pattern remains valid for unrelated chains but is superseded by the N+1 stacked-base pattern above for epic-scoped work where the chains share a logical integration boundary.
When creating standalone PRs, use the bookmark name as the head branch and main as the base:
jj git push --bookmark chain-a
gh pr create -d -a "@me" -B main -H chain-a -t "feat: description" -b ""
Follow the PR creation protocol in ~/.claude/skills/preferences-git-version-control/SKILL.md for placeholder content and safety conventions.
For GitHub-only repositories, Mergify's Stack-Aware Base feature would handle single-CI-gate behavior natively without an explicit aggregate PR; see the footnote in diamond-workflow.md Phase 4 for the trade-off against forge-agnostic compatibility.
The skill uses terminology from three traditions, sometimes naming the same concept differently:
| Concept | This skill | Krycho (community) | Upstream jj | Order / lattice theory |
|---|---|---|---|---|
| Multi-parent integration commit | development join | [merge] (with [wip] on top) | "merge commit at @" (pattern unnamed; see FAQ.md:255-294) | join (∨), least upper bound |
| Greatest common ancestor of parallel work | fork point | (uses generic "common ancestor") | fork_point() revset (docs/revsets.md:349-353) | meet (∧), greatest lower bound |
| Totally ordered subset of commits | chain | "stream of work" or "branch" | "linear chain" or "anonymous branch" | chain (precise term) |
| Mutually incomparable parallel branches | chain tips of a development join | (unnamed) | (unnamed) | antichain (Dilworth) |
| Maximum of a chain | chain tip | "tip commit" | "tip" | maximum of the chain |
| The integrated structural pattern | diamond workflow | "megamerge" (title-only, undefined) | (unnamed) | a bounded sublattice with antichain interior |
| Moving a change to its semantic home | route (append-, amend-, absorb-) | "squash into", "absorb" | jj squash --into, jj absorb, jj new --insert-* | (operational; no formal term) |
| Splice operation below chain roots | splice-below-join (by-construction / by-relocation) | (unnamed) | jj rebase --revisions <X> --insert-before <revset> / jj new --insert-before <revset> | antichain target; operational route below the diamond interior |
[merge] / [wip] bracket notation is Krycho-canonical (from Jujutsu Megamerges and jj absorb) and used in this skill for visual concreteness when describing the structural pair.
The full theoretical treatment of the lattice / partial-order foundation — Dilworth's antichain theorem, Lamport's partial order, Winskel event structures — is in docs/notes/development/version-control/epic-to-branch-diamond-workflow.md.
jj revert usagejj revert creates a new change that applies the inverse of a given revision.
The command requires explicit placement via --onto, --insert-after, or --insert-before.
Index curated reference corpora into a searchable knowledge graph via the cognee engine, then query it to ground technical writing, review, and analysis. Use when ingesting reference documents into named datasets or retrieving grounding context for tasks like drafting or reviewing a manuscript. A reference-knowledge index, explicitly not agent session memory.
Nix development conventions for flakes, derivations, modules, and code style. Use when authoring flake.nix files, writing derivations or builders, designing NixOS/nix-darwin/home-manager modules, or following nix formatting and naming conventions. For check architecture and CI integration, see preferences-nix-checks-architecture and preferences-nix-ci-cd-integration.
Approximately-verifiable, refinement-driven development for type-driven domain-driven design. Use when modeling a domain as a dependently-typed Lean 4 specification, refining/lowering it to a Rust implementation, lifting the implementation back via Charon and Aeneas to check spec<->implementation correspondence (translation validation) — mechanically when tractable, otherwise via differential testing or LLM comparison — or when generating and diffing type-system diagrams of the model and implementation to track their evolution. Mechanical on-the-nose proof is the precise ideal, not a requirement; its absence is not a failure of the method.
Guide for creating effective skills. This skill should be used when users want to create a new skill (or update an existing skill) that extends Claude's capabilities with specialized knowledge, workflows, or tool integrations.
Algebraic data type patterns including sum types, product types, and pattern matching across languages. Load when designing type hierarchies or working with discriminated unions.
Algebraic laws including functor/monad laws and property-based testing strategies. Load when verifying algebraic properties or writing property tests.