Evaluates the condition of municipal infrastructure assets (pipes, bridges, culverts, manholes) using inspection data, age, material, and failure history. This skill should be used when an asset ID or location is available and the pipeline needs a `condition_assessment.json` with condition rating, remaining useful life estimate, and rehabilitation priority.
Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.
A direct command skips the review prompt. Inspect the source before running it.
Evaluates the condition of municipal infrastructure assets (pipes, bridges, culverts, manholes) using inspection data, age, material, and failure history. This skill should be used when an asset ID or location is available and the pipeline needs a `condition_assessment.json` with condition rating, remaining useful life estimate, and rehabilitation priority.
source
Ontario Provincial Standard Specifications (OPSS), CSA S6:19, MTO BIM, OSIM
authority
Province of Ontario, Ministry of Transportation Ontario, Canadian Standards Association
data_as_of
2026-03-08
pipeline_position
1
pipeline_outputs
condition_assessment.json
pipeline_downstream
infrastructure-standards
Infrastructure Assessment
Purpose
Produce a structured condition assessment for a municipal infrastructure asset. Evaluate physical condition indicators against applicable standards, estimate remaining useful life, and classify rehabilitation urgency. Do not design remediation here — only assess current state and flag deficiencies.
Keep this skill narrow:
Collect and normalize inspection data
Evaluate condition against applicable standards (OPSD, CSA S6, OSIM)
Score condition and estimate remaining service life
Flag critical deficiencies and safety concerns
Hand off to infrastructure-standards for design-standard lookups if needed
Use when
An infrastructure asset needs a condition assessment
Inspection data, age, material type, or failure history is available
The next step needs a condition_assessment.json
Do not use when
The task is to design a new asset or select materials
The task is to look up a specific standard requirement (use infrastructure-standards)
The task is to produce a capital plan or budget estimate
Inputs
{"project_id":"uuid","asset_type":"storm_sewer | sanitary_sewer | watermain | bridge | culvert | manhole | catchbasin","asset_id":"municipal asset ID or null","location":{"address":"123 Main St, Toronto ON","coordinates":[43.6532,-79.3832],
