agentv-bench

name

agentv-bench

description

Run AgentV evaluations and optimize agents through eval-driven iteration. Triggers: run evals, benchmark agents, optimize prompts/skills against evals, compare agent outputs across providers, analyze eval results, offline evaluation of recorded sessions, run autoresearch, optimize unattended, run overnight optimization loop. Not for: writing/editing eval YAML without running (use agentv-eval-writer), analyzing existing traces/JSONL without re-running (use agentv-trace-analyst).

AgentV Bench

A skill for evaluating agents and iteratively improving them through data-driven optimization.

At a high level, the process goes like this:

• Understand what the agent does and what "good" looks like
• Write evaluation test cases (EVAL.yaml or evals.json)
• Run the agent on those test cases, grade the outputs
• Analyze the results — what's working, what's failing, and why
• Improve the agent's prompts/skills/config based on the analysis
• Repeat until you're satisfied

Your job when using this skill is to figure out where the user is in this process and then jump in and help them progress. Maybe they want to start from scratch — help them write evals, run them, and iterate. Maybe they already have results — jump straight to analysis and improvement.

Be flexible. If the user says "I don't need a full benchmark, just help me debug this failure", do that instead.

After the agent is working well, you can also run description optimization to improve skill triggering accuracy (see references/description-optimization.md).

Communicating with the user

This skill is used by people across a wide range of familiarity with evaluation tooling. Pay attention to context cues:

• "evaluation" and "benchmark" are borderline but OK in most cases
• For "YAML", "grader", "assertion", "deterministic judge" — see serious cues from the user that they know what those mean before using them without explanation
• Briefly explain terms if in doubt

When presenting results, default to summary tables. Offer detail on request. In CI/headless mode, skip interactive prompts and exit with status codes.

---

Step 1: Understand the Agent

Before running or optimizing, understand what you're working with.

1. Read the agent's artifacts — prompts, skills, configs, recent changes. Understand the full picture: what tools are available, what the expected input/output looks like, what constraints exist.

2. Identify success criteria — what does "good" look like for this agent? What are the edge cases? What would a failure look like? Talk to the user if this isn't clear from the artifacts alone.

3. Understand the target harness — which provider runs the agent (Claude, GPT, Copilot CLI, Gemini, custom CLI)? This affects what grader types are available and how to run tests. Targets are configured in .agentv/targets.yaml (canonical location, searched from the eval file directory upward). Sensitive values like api_key must use {{ env.ENV_VAR }} references — literal secrets are rejected as a security guardrail.

4. Challenge assumptions — if evals already exist, review their quality before running:

   • Are the test cases testing the right things?
   • Are assertions specific enough to catch real failures?
   • Are there ambiguous or contradictory test cases?
   • Flag eval issues before proceeding — running bad evals wastes time.

5. Check integrity — ensure task prompts (what the agent receives) are not also used as grader prompts (how outputs are scored). If a prompt file appears in both locations, note the overlap and optimize only for the task purpose.

---

Step 2: Write Evaluations

AgentV supports two evaluation formats:

EVAL.yaml (native, full features) — supports prompt matrices, environment recipes, script graders, multi-turn conversations, tool trajectory scoring, workspace file tracking, and multi-provider targets. Use this for agent evaluation.

# example.eval.yaml
prompts:
  - "{{ task }}"

environment:
  type: host
  workdir: ./workspace-template
  setup:
    command: ["bash", "-lc", "bun install && bun run build"]
    cwd: "."

tests:
  - id: basic-code-review
    vars:
      task: "Review this TypeScript file for bugs and suggest improvements"
    assert:
      - type: contains
        value: "null"
      - Review identifies the null pointer bug and suggests a concrete fix

Multi-skill evaluation is handled naturally via prompt messages — describe the task in prompts, put row-specific data in tests[].vars, and the agent uses whatever skills it needs.

evals.json (skill-creator compatible) — auto-promoted to EVAL-equivalent format:

• prompt → input messages
• expected_output → reference answer
• assertions → graders
• files[] paths resolved relative to the evals.json location

{
  "skill_name": "my-agent",
  "evals": [
    {
      "id": 1,
      "prompt": "User's task prompt",
      "expected_output": "Description of expected result",
      "assertions": ["Output includes error handling", "Uses async/await"]
    }
  ]
}

Writing good test cases

Start with 2-3 realistic test cases — the kind of thing a real user would actually say. Share them with the user before running: "Here are a few test cases I'd like to try. Do these look right, or do you want to add more?"

Good assertions are objectively verifiable and have descriptive names. Subjective quality ("the output is good") is better evaluated qualitatively — don't force assertions onto things that need human judgment.

Grader types (cheapest to most expensive): exact, contains, regex, is-json, field-accuracy, assert-set, skill-used, not-skill-used, trajectory:*, script, llm-rubric. See references/eval-yaml-spec.md for full config and grading recipes for each type.

Prefer deterministic graders over LLM graders whenever possible. If an assertion can be checked with contains or regex, don't use llm-rubric.

---

Step 3: Run and Grade

This section is one continuous sequence — don't stop partway through.

Each run produces a new canonical .agentv/results/<run_id>/ directory automatically. Use the printed run id and .internal/index.jsonl when comparing runs.

Choosing a run mode

User instruction takes priority. If the user says "run in subagent mode", "use subagent mode", or "use CLI mode", use that mode directly.

If the user has not specified a mode, default to AgentV CLI mode.

Mode	When to use	How
AgentV CLI (default)	Normal eval runs, multi-provider benchmarking, CI, artifact generation, and Dashboard-compatible results.	agentv eval <path>
Subagent mode	Explicit user request, no usable CLI/runtime, or rare provider/request-cost constraints.	Read references/subagent-pipeline.md first.

Do not read AGENT_EVAL_MODE or another environment variable to decide the default mode. User instruction always overrides the default.

Subagent mode — Parses eval.yaml directly, spawns executor subagents to run each test case in the current workspace, then spawns grader subagents to evaluate assertion types natively. This is an opt-in fallback. Read references/subagent-pipeline.md for the detailed procedure before using it.

AgentV CLI mode — AgentV CLI handles execution, grading, and artifact generation end-to-end. Works with all providers. Use this unless the user explicitly asks for subagent mode or the CLI path is unavailable.

Running evaluations

AgentV CLI mode (default, end-to-end, EVAL.yaml):

agentv eval <eval-path>

Subagent mode — read references/subagent-pipeline.md for the detailed procedure. In brief: use pipeline input to extract inputs, dispatch one executor subagent per test case (all in parallel), then proceed to grading below.

Spawn all runs in the same turn. For each test case that needs both a "with change" and a "baseline" run, launch them simultaneously. Don't run one set first and come back for the other — launch everything at once so results arrive around the same time.

Multi-target benchmarking:

agentv eval <eval-path> --target claude --target gpt --target copilot

Baseline strategy:

• New agent: baseline is "no prompt" or minimal prompt — same eval, no agent-specific configuration
• Improving existing: snapshot the current version before editing (cp -r <prompt-dir> <workspace>/prompt-snapshot/), use as baseline throughout
• Multi-target: each target is its own baseline — no need for a separate "without" run

While runs are in progress, draft graders

Don't just wait for runs to finish — use this time productively. If assertions don't exist yet, draft them now. If they exist, review them and explain what they check to the user.

Good assertions are discriminating — they pass when the agent genuinely succeeds and fail when it doesn't. An assertion that passes for both good and bad outputs is worse than no assertion.

As runs complete, capture timing data

When each subagent task completes, you receive a notification containing total_tokens and duration_ms. Save this data immediately to timing.json in the run directory. See references/schemas.md for the timing.json schema.

This is the only opportunity to capture this data — it comes through the task notification and isn't persisted elsewhere. Process each notification as it arrives.

After all executors complete

Once all executor subagent notifications arrive, read response.md directly from disk. Do NOT use read_agent to fetch executor results — they are already written to the run directory. Verify all responses exist before proceeding:

for d in <run-dir>/<evalset>/*/; do
  echo "$(basename $d): $(ls "$d"/response.md 2>/dev/null && echo OK || echo MISSING)"
done

If any response.md is MISSING, re-run that specific executor subagent. Do not proceed to grading until all responses are present.

Grading

In CLI mode, agentv eval handles all grading end-to-end — no manual phases needed.

In subagent mode, grading has three phases. All three are required — do not stop after phase 1.

Phase 1: script graders (deterministic, zero-cost)

agentv pipeline grade <run-dir>

This evaluates all deterministic assertions against response.md files. Two types are handled:

• script-grader scripts — external scripts executed against the response (arbitrary logic, any language)
• Built-in assertion types — evaluated in-process: contains, contains-any, contains-all, icontains, regex, equals, starts-with, ends-with, is-json, and variants

Both types are configured by pipeline input into script_graders/<name>.json and graded by pipeline grade. Results are written to <test-id>/script_grader_results/<name>.json. Alternatively, pass --grader-type code to pipeline run to run these inline.

Do not dispatch LLM grader subagents for tests that only have contains, regex, or other built-in assertions — pipeline grade handles them entirely, at zero cost. To detect which tests need Phase 2, check whether <test-id>/llm_graders/ contains any .json config files — pipeline input only writes there for llm-rubric assertions. Tests with an empty (or missing) llm_graders/ directory are done after Phase 1.

Phase 2: LLM grading (semantic — do NOT skip this phase)

Dispatch one grader subagent per (test × LLM grader) pair, all in parallel. Do not write a script to call an LLM API instead — the grader subagents use their own reasoning, which IS the LLM grading. Example: 5 tests × 2 LLM graders = 10 grader subagents launched simultaneously.

Do NOT dispatch a single grader for multiple tests. Each subagent grades exactly one (test, grader) pair.

Before dispatching graders, read agents/grader.md and embed its full content as the system instructions in every grader subagent prompt. The grader is a general-purpose task agent — there is no auto-resolved "grader" type. Without agents/grader.md embedded verbatim, the subagent has no grading process, no output format, and no file-path knowledge, and will produce empty or incorrect output.

Each grader subagent (operating under agents/grader.md instructions):

1. Reads <test-id>/llm_graders/<name>.json for the grading prompt
2. Reads <test-id>/response.md for the candidate output
3. Grades the response against the prompt criteria
4. Writes its result to disk: <run-dir>/<evalset>/<test-id>/llm_grader_results/<name>.json
5. Returns score (0.0–1.0) and per-assertion notes to the orchestrator

Writing to disk is critical. Intermediate assertion arrays are lost if accumulated only in the orchestrator's context across multiple batches (context summarization drops detail). Writing per-test results to llm_grader_results/<name>.json makes grading resumable. Public grading.json artifacts normalize these details into recursive component_results.

The intermediate subagent result file format is:

{ "score": 0.85, "assertions": [{"text": "...", "passed": true, "evidence": "..."}] }

After all grader subagents complete, run Phase 3 directly.

Phase 3: Merge and validate

agentv pipeline bench <run-dir>
agentv results validate <run-dir>

pipeline bench reads LLM grader results from llm_grader_results/<name>.json per test automatically, merges with script-grader scores, computes aggregate scores, and writes the canonical run bundle with .internal/index.jsonl, summary.json, and per-attempt grading.json.

Diagnosing pass_rate=0: If pipeline bench reports pass_rate=0 across the board, do not assume the tests genuinely failed. First verify the grading pipeline ran correctly: check that <test-id>/llm_grader_results/<name>.json exists and is non-empty for each test. If these files are absent or empty, the grader subagents failed to produce output (most common cause: agents/grader.md was not embedded in the subagent prompts — see Phase 2). Treat pass_rate=0 as a real signal only after confirming grader results exist.

Artifacts

All artifacts use established schemas — see references/schemas.md for the full definitions. Do not modify the structure. Key artifacts per run:

• .internal/index.jsonl: canonical row index for compare, Dashboard, rerun, and artifact discovery
• grading.json: aggregate pass, score, reason, recursive component_results, and optional assertion, named_scores, and metadata
• metrics.json: token, cost, timing, tool, and transcript metrics for the attempt
• summary.json: run-level aggregate metadata and pass/score rollups

Write artifacts to .agentv/results/<run_id>/ through the CLI unless a task explicitly needs a fixed output path.

Environment features (EVAL.yaml only)

• Environment recipes — prepare host or Docker testbeds with type, workdir, and argv-only setup.command
• Static local override — use --workspace-path only when an existing local directory should be reused as-is
• Multi-repo — materialize repos from setup scripts when a task needs several checkouts
• File change tracking — grade by diffing workspace files before/after agent execution

---

Step 4: Analyze Results

Once all runs are graded, analyze the results before attempting improvements.

Pattern analysis

Read the JSONL results and look for:

• Always-pass tests — assertion too loose or non-discriminating. If it passes for both good and bad outputs, it's not testing anything.
• Always-fail tests — task impossible, eval broken, or assertion misconfigured. Don't optimize against broken evals.
• Flaky tests — non-deterministic results across runs. Investigate before treating failures as real.
• Systematic failures — same failure pattern across multiple tests. This usually points to a missing instruction or wrong approach.
• Deterministic upgrade candidates — llm-rubric assertions that could be replaced with contains, regex, or is-json (cheaper, faster, more reliable).

Dispatch subagents

• Dispatch analyzer (read agents/analyzer.md) for a structured quality audit: deterministic upgrade suggestions, weak assertion detection, cost/quality flags, and benchmark pattern analysis.

• Dispatch comparator (read agents/comparator.md) for blind N-way comparison between iterations or targets. The comparator blinds provider identities, generates task-specific rubrics, scores each output, then unblinds and attributes improvements.

Trace analysis

Use CLI tools for deeper investigation:

agentv inspect <results-file>          # Detailed execution trace inspection
agentv results compare <file-a> <file-b>     # Structured diff between runs

Look for: tool call patterns, error recovery behavior, conversation flow, wasted steps.

Present results to the user

Show a summary table:

| Test ID          | Score | Pass/Fail | Delta | Notes                    |
|------------------|-------|-----------|-------|--------------------------|
| basic-code-review| 0.85  | ✓ PASS    | +0.15 | Found the bug this time  |
| edge-case-empty  | 0.00  | ✗ FAIL    | —     | Crashed on empty input   |

Highlight:

• Current pass rate and delta from baseline
• Comparison results (which target/iteration won and why)
• Analyst observations the aggregate stats would hide

Ask: "How does this look? Anything you'd change about the evals or the approach?"

---

Step 5: Improve

This is the heart of the loop. You've run the test cases, analyzed the results, and now you need to make the agent better.

How to think about improvements

1. Generalize from the analysis. You're iterating on a small eval set, but the agent will be used on many different inputs. Don't overfit to specific test cases. Rather than fiddly patches or oppressively rigid MUSTs, try different approaches and see what works. It's cheap to experiment.

2. Keep the prompt lean. Read the execution transcripts, not just the final outputs. If the agent wastes time on unproductive steps, remove the instructions causing that. If it always ignores a section, that section isn't pulling its weight.

3. Explain the why. Today's LLMs are smart. They have good theory of mind and can go beyond rote instructions when given good reasoning. If you find yourself writing ALWAYS or NEVER in all caps, that's a yellow flag — reframe as an explanation of why the thing matters. That's more humane, powerful, and effective.

4. Look for repeated work. Read the transcripts from test runs and notice if the agent independently takes the same multi-step approach to something across cases. If all test runs result in writing the same helper script, bundle it. If every run makes the same mistake, the instruction is missing or unclear.

Applying changes

• Surgical edits: ADD (new rule for a missing constraint), UPDATE (refine for clarity), DELETE (remove redundant or harmful rules), NEGATIVE CONSTRAINT (explicitly state what NOT to do)
• One change per iteration to isolate effects. If you change three things and the score improves, you don't know which change helped.
• Variant tracking: When a change helps some tests but hurts others, maintain 2-3 prompt variants. Compare variants to find the best overall approach before converging.
• When converging: Generalize specific patches into broad principles. Remove redundancy and contradictions. Ensure the prompt is clear, focused, and under 200 lines.

Evaluation integrity

Critical: Only optimize task prompts (what the agent receives), never judge prompts (how graders score outputs). Modifying judge prompts games the evaluation without improving the agent.

If a prompt file is referenced in both task input and grader configs, optimize for the task purpose only. Document which prompts were modified in the optimization log.

The iteration loop

After improving:

1. Apply your changes to the agent's prompts/skills/config
2. Re-run all test cases (agentv creates a new .agentv/results/<run_id>/ directory automatically)
3. Compare against the previous iteration (Step 4). If running in automated mode, use the automated keep/discard logic below instead of manual judgment — it will decide whether to keep or revert the change for you.
4. Present results to the user (or log the decision if running automated keep/discard)
5. Stop when ANY of:
   • The user says they're happy
   • Feedback is all empty (everything looks good)
   • You're not making meaningful progress (no improvement for 2 consecutive iterations)
   • Target pass rate is reached
   • Maximum iterations exhausted

Human checkpoints: At iterations 3, 6, and 9, always present progress to the user regardless of automation settings. Push back if optimization is accumulating contradictory rules or overfitting to specific test cases.

Automated keep/discard

For autonomous iteration, use agentv results compare --json to automatically decide whether to keep or discard each change based on wins/losses/ties. Read references/autoresearch.md for the full decision rules, logging format, and integration with the iteration loop.

---

Entering Mid-Lifecycle

Users can start at any step by providing existing data:

Entry point	Required input	Example prompt
Step 1 (Understand)	eval-path	"Optimize my agent against evals/support.yaml"
Step 2 (Write Evals)	Agent artifacts	"Write evals for this agent"
Step 3 (Run + Grade)	eval-path	"Run this eval and show me results"
Step 4 (Analyze)	results-path	"Analyze why my agent is failing on these results"
Step 5 (Improve)	Analysis + strategy	"Apply these optimization suggestions"

When entering mid-lifecycle, run only the requested step and subsequent steps. Don't re-run earlier steps unless the user requests a full loop.

---

Advanced: Blind Comparison

For situations where you want a rigorous comparison between two versions (e.g., "is the new version actually better?"), dispatch the comparator subagent. It blinds identities, generates task-specific rubrics, scores outputs, then unblinds and explains why the winner won.

This is optional and requires subagents. The human review loop is usually sufficient.

---

Description Optimization

After the agent is working well, offer to optimize the skill's description field for better triggering accuracy. Read references/description-optimization.md for the full procedure (generate trigger EVAL.yaml, review with user, iterate, apply).

---

Autoresearch Mode

Autoresearch is an unattended eval-improve loop that runs multiple optimize cycles without human intervention. The user triggers it with natural language (e.g., "run autoresearch on this skill", "optimize this skill unattended"). It uses the mutator subagent (agents/mutator.md) to rewrite artifacts based on failure analysis, and automated keep/discard to decide whether to keep or revert each change.

Read references/autoresearch.md for the full procedure (prerequisites, artifact layout, keep/discard rules, the step-by-step loop, convergence criteria, and context hygiene).

---

Environment Adaptation

For provider-specific notes (Copilot, Codex, Claude SDK, custom CLI), CI/headless mode behavior, and fallback strategies when subagents aren't available, read references/environment-adaptation.md.

---

Subagent Reference

The agents/ directory contains instructions for specialized subagents. Read them when you need to spawn the relevant subagent.

Agent	File	Purpose	When to dispatch
executor	agents/executor.md	Perform test case tasks as the target agent	Step 3 (agent targets — one per test case)
grader	agents/grader.md	Grade responses with per-assertion evidence	Step 3 (grading — one per test × LLM grader pair)
comparator	agents/comparator.md	Blind N-way comparison + post-hoc analysis	Step 4 (comparing iterations/targets)
analyzer	agents/analyzer.md	Quality audit, deterministic upgrades, benchmarks	Step 4 (pattern analysis)
mutator	agents/mutator.md	Rewrite artifact from failure analysis	Step 5 (autoresearch — dispatched per cycle)

The references/ directory has additional documentation:

• references/autoresearch.md — Autoresearch unattended optimization loop and automated keep/discard rules
• references/eval-yaml-spec.md — Eval YAML schema and assertion grading recipes
• references/subagent-pipeline.md — Detailed subagent-mode pipeline commands and output structure
• references/description-optimization.md — Skill description optimization workflow
• references/environment-adaptation.md — Provider-specific notes and CI/headless behavior
• references/schemas.md — JSON schemas for all artifacts (grading.json, summary.json, etc.)
• references/migrating-from-skill-creator.md — Guide for users coming from Anthropic's skill-creator

---

Repeating the core loop for emphasis:

• Understand what the agent does
• Write evaluation test cases
• Run the agent and grade outputs
• Analyze results — surface patterns, dispatch analyst and comparator subagents
• Improve the agent based on analysis
• Repeat until you and the user are satisfied

Take your time with improvements. Read the transcripts. Understand why failures happened. Make changes that generalize beyond the test set. This is important work.

Accessing reference files

To load a specific reference without pulling the entire skill into context:

agentv skills get agentv-bench --ref eval-yaml-spec

Or resolve the skill directory and read files directly:

cat $(agentv skills path agentv-bench)/references/eval-yaml-spec.md

Use --full to retrieve every file in the skill at once.