Run any Skill in Manus with one click

Get Started

uniswap-lp

Stars47

Forks22

UpdatedFebruary 23, 2026 at 23:29

Provide liquidity on Uniswap V4 (Base) — deposit to pools, withdraw, collect fees.

Installation

Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.

Run Skill in Manus

Source

ethereumdegen

ethereumdegen/stark-bot

View GitHub Repository View Creator Repositories

Download

Run Skill in Manus

Related occupationsSOC

Based on SOC occupation classification

Software DevelopersComputer and Mathematical Occupations·SOC 15-1252

File Explorer

4 files

SKILL.md

readonly

Uniswap V4 LP Skill

Provide liquidity on Uniswap V4 pools on Base — create positions, increase/decrease liquidity, and collect fees.

CRITICAL RULES

ONE TASK AT A TIME. Only do the work described in the CURRENT task. Do NOT work ahead.
Do NOT call say_to_user with finished_task: true until the current task is truly done.
Sequential tool calls only. Never call two tools in parallel when the second depends on the first.
Use exact parameter values shown. Especially cache_as values — use exactly what is specified.
Always use WETH, not native ETH. If the user wants to LP with ETH, wrap it to WETH first using the weth_deposit preset.

Pool Configuration

Pool	Pool ID	Token0	Token1	Fee	Tick Spacing	Hooks
STARKBOT/WETH	`0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc`	WETH (`0x4200000000000000000000000000000000000006`)	STARKBOT (`0x587Cd533F418825521f3A1daa7CCd1E7339A1B07`)	10000 (1%)	200	`0x0000000000000000000000000000000000000000`

Token0/token1 order is determined by address sort (lower address first). WETH < STARKBOT by address.

Key Addresses (Base)

Contract	Address
V4 PositionManager	`0x7c5f5a4bbd8fd63184577525326123b519429bdc`
V4 StateView	`0xa3c0c9b65bad0b08107aa264b0f3db444b867a71`
Permit2	`0x000000000022D473030F116dDEE9F6B43aC78BA3`
WETH	`0x4200000000000000000000000000000000000006`
STARKBOT	`0x587Cd533F418825521f3A1daa7CCd1E7339A1B07`

Tick Range Guidance

When creating a position, the user must choose a tick range. Offer these options:

Full range: tickLower = -887200, tickUpper = 887200 (like V2, simple but less capital efficient)
Wide range: approximately ±50% around current tick (balanced risk/efficiency)
Narrow range: approximately ±10% around current tick (high capital efficiency, more IL risk)

Tick alignment: tickLower and tickUpper must be multiples of the pool's tick spacing (200 for STARKBOT/WETH). Round to the nearest multiple.

To compute ticks from price ratios around the current tick:

For ±X% range: tickLower = currentTick - (X_ticks), tickUpper = currentTick + (X_ticks)
Round both to nearest multiple of tickSpacing (200)

Operation A: Get Pool Info

Read pool state to get current tick, price, and liquidity. No tasks needed — just direct tool calls.

A1. Select network

{"tool": "select_web3_network", "network": "base"}

A2. Read pool slot0

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getSlot0", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

Returns: sqrtPriceX96, tick, protocolFee, lpFee.

A3. Read pool liquidity

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getLiquidity", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

A4. Calculate and report

Calculate approximate price from sqrtPriceX96:

price = (sqrtPriceX96 / 2^96)^2
Adjust for decimals: WETH has 18 decimals, STARKBOT has 18 decimals
This gives STARKBOT per WETH price

Report: current tick, sqrtPriceX96, liquidity, approximate price.

Operation B: Create Position (Deposit) — 5 Tasks

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, look up both tokens, check balances, read pool state (slot0 + liquidity). See LP skill 'Task 1'.",
  "TASK 2 — Approve: approve both tokens for Permit2 (skip if sufficient). See LP skill 'Task 2'.",
  "TASK 3 — Build tx: POST to Uniswap API /lp/create, cache response. See LP skill 'Task 3'.",
  "TASK 4 — Execute: decode calldata, call LP preset, then broadcast_web3_tx. See LP skill 'Task 4'.",
  "TASK 5 — Verify the LP position result and report to the user. See LP skill 'Task 5'."
]}

Task 1: Prepare — look up tokens, check balances, read pool state

1a. Select network

{"tool": "select_web3_network", "network": "base"}

1b. Look up WETH (token0)

{"tool": "token_lookup", "symbol": "WETH", "cache_as": "sell_token"}

1c. Check WETH balance

{"tool": "web3_preset_function_call", "preset": "weth_balance", "network": "base", "call_only": true}

1d. Look up STARKBOT (token1)

{"tool": "token_lookup", "symbol": "STARKBOT", "cache_as": "sell_token"}

1e. Check STARKBOT balance

{"tool": "web3_preset_function_call", "preset": "erc20_balance", "network": "base", "call_only": true}

Note: sell_token register now holds STARKBOT address (from 1d). The erc20_balance preset reads from token_address — you need to set it:

{"tool": "token_lookup", "symbol": "STARKBOT", "cache_as": "token_address"}

Then check balance:

{"tool": "web3_preset_function_call", "preset": "erc20_balance", "network": "base", "call_only": true}

1f. Read pool state

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getSlot0", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getLiquidity", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

1g. Report and suggest tick range

Report balances, current tick, price, and liquidity. Suggest tick ranges (full/wide/narrow). Ask user to confirm amounts and range. Complete with finished_task: true.

Task 2: Approve tokens for Permit2

Uniswap V4 uses Permit2. Check and approve BOTH tokens if needed.

2a. Check WETH allowance for Permit2

{"tool": "token_lookup", "symbol": "WETH", "cache_as": "sell_token"}

{"tool": "web3_preset_function_call", "preset": "erc20_allowance_permit2", "network": "base", "call_only": true}

2b. Approve WETH if needed

If allowance is insufficient:

{"tool": "web3_preset_function_call", "preset": "erc20_approve_permit2", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Wait for confirmation.

2c. Check STARKBOT allowance for Permit2

{"tool": "token_lookup", "symbol": "STARKBOT", "cache_as": "sell_token"}

{"tool": "web3_preset_function_call", "preset": "erc20_allowance_permit2", "network": "base", "call_only": true}

2d. Approve STARKBOT if needed

If allowance is insufficient:

{"tool": "web3_preset_function_call", "preset": "erc20_approve_permit2", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Wait for confirmation.

2e. Complete

{"tool": "task_fully_completed", "summary": "Both tokens approved for Permit2. Ready to create position."}

If both were already approved:

{"tool": "task_fully_completed", "summary": "Both tokens already approved for Permit2 — skipping."}

Task 3: Build LP transaction via Uniswap API

IMPORTANT: Use the pool state values from Task 1 (currentTick, sqrtRatioX96, poolLiquidity).

Convert amounts to raw units first:

For WETH (token0, 18 decimals):

{"tool": "to_raw_amount", "amount": "<weth_amount>", "decimals": 18, "cache_as": "lp_amount0"}

For STARKBOT (token1, 18 decimals):

{"tool": "to_raw_amount", "amount": "<starkbot_amount>", "decimals": 18, "cache_as": "lp_amount1"}

Then call the Uniswap API:

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/create",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "amount0": "<raw_amount0_from_register>",
    "amount1": "<raw_amount1_from_register>",
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "create"
}

The json_path: "create" extracts the transaction object from the API response's create field. The cached register will contain {to, data, value}.

After success:

{"tool": "task_fully_completed", "summary": "LP create transaction built and cached. Ready to execute."}

Task 4: Decode and execute LP transaction

4a. Decode the cached transaction

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

This extracts uni_lp_contract, uni_lp_param_0, uni_lp_param_1, uni_lp_value from the cached transaction.

4b. Execute via preset

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

4c. Broadcast

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

The task auto-completes when broadcast_web3_tx succeeds.

Task 5: Verify

{"tool": "verify_tx_broadcast"}

Report the result:

VERIFIED: Position created successfully. Report tx hash and explorer link.
REVERTED: Transaction failed. Tell the user.
TIMEOUT: Tell user to check explorer.

{"tool": "task_fully_completed", "summary": "LP position created successfully."}

Operation C: Increase Position — 4 Tasks

Used to add more liquidity to an existing position.

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, look up tokens, check balances, read pool state. Get tokenId from user. See LP skill 'Increase Task 1'.",
  "TASK 2 — Approve: approve both tokens for Permit2 (skip if sufficient). See LP skill 'Task 2' (same as create).",
  "TASK 3 — Build + Execute: POST to /lp/increase, decode, execute, then broadcast_web3_tx. See LP skill 'Increase Task 3'.",
  "TASK 4 — Verify the result and report to the user. See LP skill 'Task 5' (same as create)."
]}

Increase Task 1: Prepare

Same as Create Task 1, but also ask the user for their position tokenId (they can find it on the Uniswap UI or from their wallet).

Increase Task 3: Build + Execute

Convert amounts to raw units, then call the API:

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/increase",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "tokenId": "<token_id>",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "amount0": "<raw_amount0>",
    "amount1": "<raw_amount1>",
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "increase"
}

Then decode and execute (same as Create Task 4):

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Operation D: Decrease Position (Withdraw) — 4 Tasks

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, get tokenId and withdrawal percentage from user, read pool state. See LP skill 'Decrease Task 1'.",
  "TASK 2 — Build + Execute: POST to /lp/decrease, decode, execute, then broadcast_web3_tx. See LP skill 'Decrease Task 2'.",
  "TASK 3 — Verify the result and report to the user. See LP skill 'Task 5'.",
  "TASK 4 — Report: report withdrawn amounts. See LP skill 'Decrease Task 4'."
]}

Decrease Task 1: Prepare

Select network, read pool state, ask user for:

tokenId: their position NFT token ID
How much to withdraw: percentage (e.g., 100 for full withdrawal, 50 for half)

Decrease Task 2: Build + Execute

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/decrease",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "tokenId": "<token_id>",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "liquidityPercentageToDecrease": "<percentage>",
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "decrease"
}

Then decode and execute:

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Decrease Task 4: Report

After verification, report the withdrawn token amounts and remaining position (if partial withdrawal).

Operation E: Collect Fees — 3 Tasks

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, get tokenId from user, read pool state. See LP skill 'Collect Task 1'.",
  "TASK 2 — Build + Execute: POST to /lp/claim, decode, execute, then broadcast_web3_tx. See LP skill 'Collect Task 2'.",
  "TASK 3 — Verify the result and report collected fees. See LP skill 'Task 5'."
]}

Collect Task 1: Prepare

Select network, read pool state, get tokenId from user.

Collect Task 2: Build + Execute

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/claim",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "tokenId": "<token_id>",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "claim"
}

Then decode and execute:

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Error Handling

Error	Cause	Solution
Insufficient token balance	Not enough WETH or STARKBOT	Check balances, reduce amounts or wrap ETH
Insufficient gas	Not enough ETH for gas	Need ETH on Base for gas
Allowance too low	Token not approved for Permit2	Run approval task
Invalid tick range	Ticks not aligned to tickSpacing	Round ticks to nearest multiple of 200
Pool not found	Wrong pool parameters	Verify pool config matches on-chain state
API error	Uniswap API issue	Check API key ($UNISWAP_API_KEY), retry
Slippage exceeded	Price moved too much	Increase slippageTolerance or retry

V1 Limitations

WETH only — not native ETH. Wrap ETH first using the weth_deposit preset.
Manual tokenId — user must provide their position tokenId for increase/decrease/claim operations (findable on Uniswap UI or from wallet).
Single pool — STARKBOT/WETH only initially. Extensible by adding to config/uniswap_pools.ron.
No position enumeration — cannot list all positions automatically yet.

How Uniswap V4 LP Works

Create: Deposit token0 and token1 into a price range. You receive a position NFT (tokenId).
Earn fees: When swaps happen through your price range, you earn proportional fees.
Increase: Add more liquidity to your existing position.
Decrease: Remove some or all liquidity. Receive tokens back.
Collect fees: Claim accumulated trading fees without changing your position.

Key concepts:

Tick range: Defines the price range where your liquidity is active. Narrower = more capital efficient but more impermanent loss risk.
Concentrated liquidity: Unlike V2, your capital only works within your chosen range.
Full range (tickLower=-887200, tickUpper=887200): Mimics V2 behavior, always active, less efficient.

name	uniswap_lp
description	Provide liquidity on Uniswap V4 (Base) — deposit to pools, withdraw, collect fees.
version	1.1.0
author	starkbot
homepage	https://app.uniswap.org
metadata	{"requires_auth": false, "clawdbot":{"emoji":"🦄"}}
requires_tools	["token_lookup","to_raw_amount","web3_function_call","web3_preset_function_call","decode_calldata","web_fetch","broadcast_web3_tx","verify_tx_broadcast","select_web3_network","define_tasks"]
tags	["crypto","defi","liquidity","uniswap","lp","base","yield"]

Uniswap V4 LP Skill

Provide liquidity on Uniswap V4 pools on Base — create positions, increase/decrease liquidity, and collect fees.

CRITICAL RULES

ONE TASK AT A TIME. Only do the work described in the CURRENT task. Do NOT work ahead.
Do NOT call say_to_user with finished_task: true until the current task is truly done.
Sequential tool calls only. Never call two tools in parallel when the second depends on the first.
Use exact parameter values shown. Especially cache_as values — use exactly what is specified.
Always use WETH, not native ETH. If the user wants to LP with ETH, wrap it to WETH first using the weth_deposit preset.

Pool Configuration

Pool	Pool ID	Token0	Token1	Fee	Tick Spacing	Hooks
STARKBOT/WETH	`0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc`	WETH (`0x4200000000000000000000000000000000000006`)	STARKBOT (`0x587Cd533F418825521f3A1daa7CCd1E7339A1B07`)	10000 (1%)	200	`0x0000000000000000000000000000000000000000`

Token0/token1 order is determined by address sort (lower address first). WETH < STARKBOT by address.

Key Addresses (Base)

Contract	Address
V4 PositionManager	`0x7c5f5a4bbd8fd63184577525326123b519429bdc`
V4 StateView	`0xa3c0c9b65bad0b08107aa264b0f3db444b867a71`
Permit2	`0x000000000022D473030F116dDEE9F6B43aC78BA3`
WETH	`0x4200000000000000000000000000000000000006`
STARKBOT	`0x587Cd533F418825521f3A1daa7CCd1E7339A1B07`

Tick Range Guidance

When creating a position, the user must choose a tick range. Offer these options:

Full range: tickLower = -887200, tickUpper = 887200 (like V2, simple but less capital efficient)
Wide range: approximately ±50% around current tick (balanced risk/efficiency)
Narrow range: approximately ±10% around current tick (high capital efficiency, more IL risk)

Tick alignment: tickLower and tickUpper must be multiples of the pool's tick spacing (200 for STARKBOT/WETH). Round to the nearest multiple.

To compute ticks from price ratios around the current tick:

For ±X% range: tickLower = currentTick - (X_ticks), tickUpper = currentTick + (X_ticks)
Round both to nearest multiple of tickSpacing (200)

Operation A: Get Pool Info

Read pool state to get current tick, price, and liquidity. No tasks needed — just direct tool calls.

A1. Select network

{"tool": "select_web3_network", "network": "base"}

A2. Read pool slot0

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getSlot0", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

Returns: sqrtPriceX96, tick, protocolFee, lpFee.

A3. Read pool liquidity

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getLiquidity", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

A4. Calculate and report

Calculate approximate price from sqrtPriceX96:

price = (sqrtPriceX96 / 2^96)^2
Adjust for decimals: WETH has 18 decimals, STARKBOT has 18 decimals
This gives STARKBOT per WETH price

Report: current tick, sqrtPriceX96, liquidity, approximate price.

Operation B: Create Position (Deposit) — 5 Tasks

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, look up both tokens, check balances, read pool state (slot0 + liquidity). See LP skill 'Task 1'.",
  "TASK 2 — Approve: approve both tokens for Permit2 (skip if sufficient). See LP skill 'Task 2'.",
  "TASK 3 — Build tx: POST to Uniswap API /lp/create, cache response. See LP skill 'Task 3'.",
  "TASK 4 — Execute: decode calldata, call LP preset, then broadcast_web3_tx. See LP skill 'Task 4'.",
  "TASK 5 — Verify the LP position result and report to the user. See LP skill 'Task 5'."
]}

Task 1: Prepare — look up tokens, check balances, read pool state

1a. Select network

{"tool": "select_web3_network", "network": "base"}

1b. Look up WETH (token0)

{"tool": "token_lookup", "symbol": "WETH", "cache_as": "sell_token"}

1c. Check WETH balance

{"tool": "web3_preset_function_call", "preset": "weth_balance", "network": "base", "call_only": true}

1d. Look up STARKBOT (token1)

{"tool": "token_lookup", "symbol": "STARKBOT", "cache_as": "sell_token"}

1e. Check STARKBOT balance

{"tool": "web3_preset_function_call", "preset": "erc20_balance", "network": "base", "call_only": true}

Note: sell_token register now holds STARKBOT address (from 1d). The erc20_balance preset reads from token_address — you need to set it:

{"tool": "token_lookup", "symbol": "STARKBOT", "cache_as": "token_address"}

Then check balance:

{"tool": "web3_preset_function_call", "preset": "erc20_balance", "network": "base", "call_only": true}

1f. Read pool state

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getSlot0", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

{"tool": "web3_function_call", "abi": "uniswap_v4_state_view", "contract": "0xa3c0c9b65bad0b08107aa264b0f3db444b867a71", "function": "getLiquidity", "params": ["0x0d64a8e0d28626511cc23fc75b81c2f03e222b14f9b944b60eecc3f4ddabeddc"], "call_only": true}

1g. Report and suggest tick range

Report balances, current tick, price, and liquidity. Suggest tick ranges (full/wide/narrow). Ask user to confirm amounts and range. Complete with finished_task: true.

Task 2: Approve tokens for Permit2

Uniswap V4 uses Permit2. Check and approve BOTH tokens if needed.

2a. Check WETH allowance for Permit2

{"tool": "token_lookup", "symbol": "WETH", "cache_as": "sell_token"}

{"tool": "web3_preset_function_call", "preset": "erc20_allowance_permit2", "network": "base", "call_only": true}

2b. Approve WETH if needed

If allowance is insufficient:

{"tool": "web3_preset_function_call", "preset": "erc20_approve_permit2", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Wait for confirmation.

2c. Check STARKBOT allowance for Permit2

{"tool": "token_lookup", "symbol": "STARKBOT", "cache_as": "sell_token"}

{"tool": "web3_preset_function_call", "preset": "erc20_allowance_permit2", "network": "base", "call_only": true}

2d. Approve STARKBOT if needed

If allowance is insufficient:

{"tool": "web3_preset_function_call", "preset": "erc20_approve_permit2", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Wait for confirmation.

2e. Complete

{"tool": "task_fully_completed", "summary": "Both tokens approved for Permit2. Ready to create position."}

If both were already approved:

{"tool": "task_fully_completed", "summary": "Both tokens already approved for Permit2 — skipping."}

Task 3: Build LP transaction via Uniswap API

IMPORTANT: Use the pool state values from Task 1 (currentTick, sqrtRatioX96, poolLiquidity).

Convert amounts to raw units first:

For WETH (token0, 18 decimals):

{"tool": "to_raw_amount", "amount": "<weth_amount>", "decimals": 18, "cache_as": "lp_amount0"}

For STARKBOT (token1, 18 decimals):

{"tool": "to_raw_amount", "amount": "<starkbot_amount>", "decimals": 18, "cache_as": "lp_amount1"}

Then call the Uniswap API:

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/create",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "amount0": "<raw_amount0_from_register>",
    "amount1": "<raw_amount1_from_register>",
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "create"
}

The json_path: "create" extracts the transaction object from the API response's create field. The cached register will contain {to, data, value}.

After success:

{"tool": "task_fully_completed", "summary": "LP create transaction built and cached. Ready to execute."}

Task 4: Decode and execute LP transaction

4a. Decode the cached transaction

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

This extracts uni_lp_contract, uni_lp_param_0, uni_lp_param_1, uni_lp_value from the cached transaction.

4b. Execute via preset

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

4c. Broadcast

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

The task auto-completes when broadcast_web3_tx succeeds.

Task 5: Verify

{"tool": "verify_tx_broadcast"}

Report the result:

VERIFIED: Position created successfully. Report tx hash and explorer link.
REVERTED: Transaction failed. Tell the user.
TIMEOUT: Tell user to check explorer.

{"tool": "task_fully_completed", "summary": "LP position created successfully."}

Operation C: Increase Position — 4 Tasks

Used to add more liquidity to an existing position.

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, look up tokens, check balances, read pool state. Get tokenId from user. See LP skill 'Increase Task 1'.",
  "TASK 2 — Approve: approve both tokens for Permit2 (skip if sufficient). See LP skill 'Task 2' (same as create).",
  "TASK 3 — Build + Execute: POST to /lp/increase, decode, execute, then broadcast_web3_tx. See LP skill 'Increase Task 3'.",
  "TASK 4 — Verify the result and report to the user. See LP skill 'Task 5' (same as create)."
]}

Increase Task 1: Prepare

Same as Create Task 1, but also ask the user for their position tokenId (they can find it on the Uniswap UI or from their wallet).

Increase Task 3: Build + Execute

Convert amounts to raw units, then call the API:

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/increase",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "tokenId": "<token_id>",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "amount0": "<raw_amount0>",
    "amount1": "<raw_amount1>",
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "increase"
}

Then decode and execute (same as Create Task 4):

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Operation D: Decrease Position (Withdraw) — 4 Tasks

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, get tokenId and withdrawal percentage from user, read pool state. See LP skill 'Decrease Task 1'.",
  "TASK 2 — Build + Execute: POST to /lp/decrease, decode, execute, then broadcast_web3_tx. See LP skill 'Decrease Task 2'.",
  "TASK 3 — Verify the result and report to the user. See LP skill 'Task 5'.",
  "TASK 4 — Report: report withdrawn amounts. See LP skill 'Decrease Task 4'."
]}

Decrease Task 1: Prepare

Select network, read pool state, ask user for:

tokenId: their position NFT token ID
How much to withdraw: percentage (e.g., 100 for full withdrawal, 50 for half)

Decrease Task 2: Build + Execute

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/decrease",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "tokenId": "<token_id>",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "liquidityPercentageToDecrease": "<percentage>",
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "decrease"
}

Then decode and execute:

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Decrease Task 4: Report

After verification, report the withdrawn token amounts and remaining position (if partial withdrawal).

Operation E: Collect Fees — 3 Tasks

Define tasks

{"tool": "define_tasks", "tasks": [
  "TASK 1 — Prepare: select Base, get tokenId from user, read pool state. See LP skill 'Collect Task 1'.",
  "TASK 2 — Build + Execute: POST to /lp/claim, decode, execute, then broadcast_web3_tx. See LP skill 'Collect Task 2'.",
  "TASK 3 — Verify the result and report collected fees. See LP skill 'Task 5'."
]}

Collect Task 1: Prepare

Select network, read pool state, get tokenId from user.

Collect Task 2: Build + Execute

{
  "tool": "web_fetch",
  "url": "https://trade-api.gateway.uniswap.org/v1/lp/claim",
  "method": "POST",
  "headers": {"x-api-key": "$UNISWAP_API_KEY"},
  "body": {
    "protocol": "V4",
    "tokenId": "<token_id>",
    "walletAddress": "<wallet_address>",
    "chainId": 8453,
    "position": {
      "pool": {
        "token0": "0x4200000000000000000000000000000000000006",
        "token1": "0x587Cd533F418825521f3A1daa7CCd1E7339A1B07",
        "fee": 10000,
        "tickSpacing": 200,
        "hooks": "0x0000000000000000000000000000000000000000"
      },
      "tickLower": "<tick_lower>",
      "tickUpper": "<tick_upper>"
    },
    "poolLiquidity": "<from_task1>",
    "currentTick": "<from_task1>",
    "sqrtRatioX96": "<from_task1>",
    "slippageTolerance": 50
  },
  "extract_mode": "raw",
  "cache_as": "uni_lp_tx",
  "json_path": "claim"
}

Then decode and execute:

{"tool": "decode_calldata", "abi": "uniswap_v4_position_manager", "calldata_register": "uni_lp_tx", "cache_as": "uni_lp"}

{"tool": "web3_preset_function_call", "preset": "uni_v4_modify_liquidities", "network": "base"}

{"tool": "broadcast_web3_tx", "uuid": "<uuid>"}

Error Handling

Error	Cause	Solution
Insufficient token balance	Not enough WETH or STARKBOT	Check balances, reduce amounts or wrap ETH
Insufficient gas	Not enough ETH for gas	Need ETH on Base for gas
Allowance too low	Token not approved for Permit2	Run approval task
Invalid tick range	Ticks not aligned to tickSpacing	Round ticks to nearest multiple of 200
Pool not found	Wrong pool parameters	Verify pool config matches on-chain state
API error	Uniswap API issue	Check API key ($UNISWAP_API_KEY), retry
Slippage exceeded	Price moved too much	Increase slippageTolerance or retry

V1 Limitations

WETH only — not native ETH. Wrap ETH first using the weth_deposit preset.
Manual tokenId — user must provide their position tokenId for increase/decrease/claim operations (findable on Uniswap UI or from wallet).
Single pool — STARKBOT/WETH only initially. Extensible by adding to config/uniswap_pools.ron.
No position enumeration — cannot list all positions automatically yet.

How Uniswap V4 LP Works

Create: Deposit token0 and token1 into a price range. You receive a position NFT (tokenId).
Earn fees: When swaps happen through your price range, you earn proportional fees.
Increase: Add more liquidity to your existing position.
Decrease: Remove some or all liquidity. Receive tokens back.
Collect fees: Claim accumulated trading fees without changing your position.

Key concepts:

Tick range: Defines the price range where your liquidity is active. Narrower = more capital efficient but more impermanent loss risk.
Concentrated liquidity: Unlike V2, your capital only works within your chosen range.
Full range (tickLower=-887200, tickUpper=887200): Mimics V2 behavior, always active, less efficient.

uniswap-lp

More from this repository

More from this repository

Uniswap V4 LP Skill

CRITICAL RULES

Pool Configuration

Key Addresses (Base)

Tick Range Guidance

Operation A: Get Pool Info

A1. Select network

A2. Read pool slot0

A3. Read pool liquidity

A4. Calculate and report

Operation B: Create Position (Deposit) — 5 Tasks

Define tasks

Task 1: Prepare — look up tokens, check balances, read pool state

1a. Select network

1b. Look up WETH (token0)

1c. Check WETH balance

1d. Look up STARKBOT (token1)

1e. Check STARKBOT balance

1f. Read pool state

1g. Report and suggest tick range

Task 2: Approve tokens for Permit2

2a. Check WETH allowance for Permit2

2b. Approve WETH if needed

2c. Check STARKBOT allowance for Permit2

2d. Approve STARKBOT if needed

2e. Complete

Task 3: Build LP transaction via Uniswap API

Task 4: Decode and execute LP transaction

4a. Decode the cached transaction

4b. Execute via preset

4c. Broadcast

Task 5: Verify

Operation C: Increase Position — 4 Tasks

Define tasks

Increase Task 1: Prepare

Increase Task 3: Build + Execute

Operation D: Decrease Position (Withdraw) — 4 Tasks

Define tasks

Decrease Task 1: Prepare

Decrease Task 2: Build + Execute

Decrease Task 4: Report

Operation E: Collect Fees — 3 Tasks

Define tasks

Collect Task 1: Prepare

Collect Task 2: Build + Execute

Error Handling

V1 Limitations

How Uniswap V4 LP Works

Uniswap V4 LP Skill

CRITICAL RULES

Pool Configuration

Key Addresses (Base)

Tick Range Guidance

Operation A: Get Pool Info

A1. Select network

A2. Read pool slot0

A3. Read pool liquidity

A4. Calculate and report

Operation B: Create Position (Deposit) — 5 Tasks

Define tasks

Task 1: Prepare — look up tokens, check balances, read pool state

1a. Select network

1b. Look up WETH (token0)

1c. Check WETH balance

1d. Look up STARKBOT (token1)

1e. Check STARKBOT balance

1f. Read pool state

1g. Report and suggest tick range

Task 2: Approve tokens for Permit2

2a. Check WETH allowance for Permit2

2b. Approve WETH if needed

2c. Check STARKBOT allowance for Permit2

2d. Approve STARKBOT if needed

2e. Complete

Task 3: Build LP transaction via Uniswap API

Task 4: Decode and execute LP transaction

4a. Decode the cached transaction