css-append-selector-verify

name	css-append-selector-verify
description	Safely append CSS styles from one file to another, with per-selector grep verification after every append to catch silent truncation that tail or wc-l alone would miss

Safe CSS Append Workflow (with Per-Selector Verification)

This skill provides a systematic approach for safely appending CSS styles from a source file to a destination file. The workflow ensures no content is overwritten, CSS variables are properly adapted, and every appended selector is individually confirmed present — so silent heredoc truncation of long lines is caught immediately rather than being masked by a passing line-count check.

When to Use This Skill

• Migrating styles between projects
• Copying component styles while preserving existing rules
• Adding new CSS rules without duplicating or conflicting with existing styles
• Adapting styles to use a different set of CSS variables

Workflow Steps

1. Read and Analyze Source CSS

First, examine the source CSS file to identify the selectors and rules you want to transfer:

# Read the source CSS file
cat /path/to/source/styles.css

# Identify specific selectors if needed
grep "selector-pattern" /path/to/source/styles.css

Document:

• Target selectors (e.g., .panel-tab, .header-nav)
• CSS variables used (e.g., --primary-color, --spacing-unit)
• Complete rule sets for each selector

2. Read and Check Destination CSS

Examine the destination file to understand existing rules and avoid duplication:

# Read the destination CSS file
cat /path/to/destination/styles.css

# Check if specific selectors already exist
grep "selector-name" /path/to/destination/styles.css

# Check for existing CSS variables
grep "^[[:space:]]*--" /path/to/destination/styles.css | head -20

Identify:

• Existing selectors that might conflict
• CSS variable naming conventions in the destination
• Any existing rules for the target selectors

3. Identify Missing Styles and Required Adaptations

Compare source and destination to determine:

• Which selectors are completely missing
• Which properties are missing from existing selectors
• How CSS variables need to be mapped (source → destination)

Example variable mapping:

Source: --panel-bg → Destination: --background-secondary
Source: --text-primary → Destination: --color-text-primary
Source: --border-radius → Keep as-is (if already defined in destination)

4. Prepare Adapted CSS Content

Create the CSS content to append, adapting variables as needed:

/* Example adapted CSS */
.new-selector {
    background-color: var(--background-secondary);  /* was --panel-bg */
    color: var(--color-text-primary);               /* was --text-primary */
    border-radius: var(--border-radius);            /* unchanged */
    padding: 8px 16px;
}

.existing-selector {
    /* Only add missing properties, not the entire rule */
    new-property: value;
}

5. Safely Append to Destination

Use append operations (never overwrite) to add the new styles.

Record the line count BEFORE appending (use this in step 6):

BEFORE=$(wc -l < /path/to/destination/styles.css)

Then append:

cat >> /path/to/destination/styles.css << 'EOF'

/* Added styles from source project */
.selector-name {
    property: value;
    variable-property: var(--adapted-variable);
}
EOF

Best practices:

• Add a comment indicating the source or purpose
• Include a blank line before the new content for readability
• Use >> (append) never > (overwrite)

6. Verify the Changes (Per-Selector Grep + Tail)

Confirm that the styles were added correctly. Do not rely on tail or wc -l alone — a heredoc can silently truncate an overly long line, leaving a selector block incomplete while the line count still increases. The required approach is to grep for every selector that was just appended.

6a. Line-count delta

AFTER=$(wc -l < /path/to/destination/styles.css)
echo "Lines added: $((AFTER - BEFORE))"

6b. Per-selector grep — one grep per appended selector

# Repeat for every selector appended in step 5
grep -n "\.selector-name"      /path/to/destination/styles.css || echo "MISSING: .selector-name"
grep -n "\.another-selector"   /path/to/destination/styles.css || echo "MISSING: .another-selector"

If any grep prints "MISSING", the append was incomplete — re-run step 5.

6c. Automation helper for many selectors

If many selectors were appended, use a loop:

DEST=/path/to/destination/styles.css
MISSING=0
for selector in \
    ".selector-name" \
    ".another-selector" \
    ".yet-another"; do
  if ! grep -q "$selector" "$DEST"; then
    echo "MISSING SELECTOR: $selector"
    MISSING=$((MISSING + 1))
  fi
done

if [ "$MISSING" -gt 0 ]; then
  echo "ERROR: $MISSING selector(s) not found — append may have been truncated."
  exit 1
else
  echo "All selectors verified present."
fi

6d. Visual spot-check

tail -n 30 /path/to/destination/styles.css

Why per-selector grep is required:

• wc -l increments even when a line is truncated — the count passes but content is lost.
• tail shows recent lines but only reveals truncation if you happen to notice a cut-off line visually.
• A grep for each selector name fails with a non-zero exit code if the selector is absent, making the failure explicit and automatable.

Complete Example

Here's a full example workflow:

# 1. Read source CSS and identify target
cat project-a/components.css | grep -A 10 ".button-primary"

# 2. Check destination for conflicts
grep ".button-primary" project-b/main.css
grep "^[[:space:]]*--btn-" project-b/main.css

# 3. Identify that .button-primary is missing, and variables need mapping:
#    --btn-color → --primary-color (exists in destination)
#    --btn-padding → create inline value

# 4. Record line count before append
BEFORE=$(wc -l < project-b/main.css)

# 5. Append adapted styles
cat >> project-b/main.css << 'EOF'

/* Button styles from project-a */
.button-primary {
    background-color: var(--primary-color);
    padding: 10px 20px;
    border-radius: 4px;
    font-weight: 600;
}
EOF

# 6a. Line-count delta
AFTER=$(wc -l < project-b/main.css)
echo "Lines before: $BEFORE  |  Lines after: $AFTER  |  Added: $((AFTER - BEFORE))"

# 6b. Per-selector grep — catches truncation that wc -l and tail miss
grep -n "\.button-primary" project-b/main.css \
  && echo "OK: .button-primary" \
  || echo "MISSING: .button-primary — possible truncation!"

# 6c. Visual spot-check
tail -n 10 project-b/main.css

Safety Checklist

• Source file read and analyzed
• Destination file checked for existing rules
• Missing styles identified
• CSS variables mapped correctly
• Append operation used (not overwrite)
• Every appended selector individually confirmed with grep (not just tail/wc -l)
• Automation loop (or per-selector greps) returned zero missing selectors
• No duplicate selectors created
• All variable references exist in destination

Common Pitfalls

1. Overwriting instead of appending: Always use >>, never >
2. Variable mismatch: Ensure all CSS variables exist in the destination or are properly defined
3. Duplicate selectors: Check for existing rules before adding complete selector blocks
4. Incomplete verification: Always grep for every appended selector by name — tail and wc -l do not detect mid-block truncation
5. Heredoc line-length truncation: Very long CSS property values or data URIs inside a heredoc can be silently cut. If a line is extremely long, use a temporary file approach instead (see Tips)

Tips

• Use wc -l before and after as a supplementary sanity check, but never as the sole verification
• Collect all selector names appended in a shell array at write time, then loop over them in the verification step — this eliminates the risk of forgetting to check a selector
• Keep a mapping document for complex variable transformations
• For very long lines (e.g., embedded SVGs or data URIs), write the CSS to a temp file first and use cat tmpfile >> dest.css rather than a heredoc; then grep-verify as normal
• Group related selectors together when appending multiple rules