jitx-physical-layout

name

jitx-physical-layout

description

This skill should be used when the user asks to author PCB physical layout from code — "draw copper from code", "create an antenna" / "filter copper" / "net tie" / "overlapping copper", build a "custom shape" or board outline with shapely, add a "custom pad shape", "soldermask/paste opening", or "thermal pad with vias", "place vias from code" / "attach a via to a pad", apply "fanout / escape tags" or "direct-connect / thermal-relief" to layout objects, or (advanced) add "control points" and "code-based routes" for escape routing or deskew. Covers shapely shape creation feeding ANY feature, Copper vs OverlappableCopper vs Pour, pad features (Soldermask/Paste/SMDPadConfig/thermal_pad), PortAttachment + explicit placement, layout-intent tags, and the Route / control-point API (RoutePoint / PairInsertion / PairPoint, stable as of JITX 4.2). For stackup, via definitions, routing structures, fence-via rules, and fenced pour outlines use jitx-substrate-modeler; for net wiring, passives, and basic pours use jitx-circuit-builder.

JITX Physical Layout

Author physical layout geometry — copper, custom shapes, pad features, explicit placement, code-driven vias/routes, and layout-intent tags — directly in Python. This is the layer between schematic-level wiring (jitx-circuit-builder) and stackup/fab definition (jitx-substrate-modeler).

JITX is a moving target — APIs on this page have been renamed across releases (most recently the control-point classes in 4.2.0). Do not rely on prior JITX knowledge — verify every import and signature with pyright against the installed package, and build-test control-point/route geometry before trusting it.

Scope — what this skill owns vs neighbors

You want to…	Skill
Draw copper shapes, antennas, filters, net-ties, custom board/pad geometry	this skill
Build a shape with shapely and feed it to any feature	this skill
Add soldermask/paste/thermal-pad features, place vias/components from code	this skill
Tag layout objects (fanout, escape, direct-connect) for selection	this skill (rule mechanics → substrate-modeler)
Code-based routes & control points (escape lanes, deskew)	this skill (advanced — see reference)
Wire nets, add passives, voltage dividers, basic pours	jitx-circuit-builder
Define the stackup, vias, routing structures, fence-via rules, fenced pour outlines	jitx-substrate-modeler
Author a component's package/landpattern from a datasheet	jitx-component-modeler
Topology (>>), timing/skew/impedance constraints	jitx-interconnect-constraints

This skill covers the design-side geometry and placement; the substrate owns the rule definitions (design_constraint(...), via classes, routing structures) that act on it. Where they meet, this skill cross-references rather than restating.

Environment

Environment setup is handled by the base jitx skill — invoke it first.

Imports

# Copper & pours
from jitx import Copper, Pour, current
from jitx.feature import OverlappableCopper          # netless overlap copper
# Features (pad / surface / keepout)
from jitx.feature import Soldermask, Paste, Silkscreen, Courtyard, Custom, Cutout, KeepOut
# Shapes
from jitx.shapes import Shape
from jitx.shapes.shapely import ShapelyGeometry       # wrap a shapely geometry
from jitx.shapes.composites import rectangle, capsule, notch_rectangle, chipped_circle
from jitx.shapes.primitive import Circle, Polygon, Text
from jitx.anchor import Anchor
from jitx.layerindex import Side, LayerSet
import shapely                                          # the upstream library
# Placement & attachment
from jitx.net import Port, PortAttachment
# Tags
from jitx.constraints import Tag, Tags
# Pad config (landpattern feature generation)
from jitxlib.landpatterns.pads import SMDPadConfig
# Code-based routes / control points (stable as of 4.2; also re-exported from top-level jitx)
from jitx.circuit import Route
from jitx.controlpoint import RoutePoint, PairInsertion, PairPoint

Do NOT import (these do not exist): jitx.copper.OverlappableCopper (it lives in jitx.feature), jitx.shapes.Shapely, jitx.geometry, jitx.layout, jitx.routes. When unsure, search the installed source:

grep -rn "class OverlappableCopper\|class Route\|class PortAttachment" .venv/lib/python*/site-packages/jitx/

Custom shapes with shapely (general)

Shapely is general shape creation for any JITX feature that takes a Shape — copper, pours, keepouts, the board outline, courtyards, and pad soldermask/paste. It is not pad-specific.

Reach for a built-in composite first for common shapes — they stay exact (rectangle, capsule, Circle, notch_rectangle, chipped_circle, bullseye, equilateral_triangle, …). Use shapely when you need CSG (union / difference / intersection), buffering, fillets, or arbitrary polygons.

import shapely
from jitx.shapes.shapely import ShapelyGeometry

# Build geometry with shapely, then wrap the result for JITX:
ring = shapely.box(-5, -5, 5, 5).difference(shapely.box(-4, -4, 4, 4))
shape = ShapelyGeometry(ring)          # a jitx Shape — feed it to ANY feature

# Round-trip an existing JITX shape into shapely for an operation:
from jitx.shapes.composites import rectangle
expanded = rectangle(2, 1).to_shapely().buffer(0.1, cap_style="square", join_style="mitre")
# `.to_shapely()` and `.buffer(...)` return ShapelyGeometry; pass straight to a feature.

ShapelyGeometry supports set operators & (intersection) | (union) - (difference) ^ (symmetric difference) and .buffer(). A morphological open (buffer(-r).buffer(r)) rounds sharp inside corners — useful for paste cells.

Validity caveat — guard before feeding a fab feature. JITX serializes only non-empty Polygon / MultiPolygon geometries. Shapely operations can produce empty geometries, LineStrings, or GeometryCollections — those raise at build time. After CSG, confirm the result is a non-empty polygon:

g = ring  # a raw shapely geometry
assert not g.is_empty and g.geom_type in ("Polygon", "MultiPolygon"), g.geom_type

Arcs are polygonized at a tolerance when converted to/from shapely; keep an eye on vertex counts for large numbers of circular features.

Copper: Pour vs Copper vs OverlappableCopper

Three ways to put copper on a layer — pick by net membership and whether the copper is allowed to overlap other copper:

Construct	On a net?	Overlap-exempt?	Use for
Pour(shape, layer, *, rank=0, orphans=True)	yes (net += Pour(...))	no	filled planes / shaped fills
Copper(shape, layer)	yes (net += Copper(...) or a + Copper(...))	no	an explicit copper shape on one net
OverlappableCopper(shape, layer)	no (netless)	yes	net-tie copper bridging two nets' pads, antenna radiators, filter copper — ignored by the router and overlap checks

Copper(..., exempt=True) was removed in 4.2.0 — there is no on-net, overlap-exempt copper anymore. Overlap-tolerant copper is OverlappableCopper, which is netless: its connectivity comes from the pads it overlaps.

Copper lives in jitx (top-level / jitx.copper); OverlappableCopper lives in jitx.feature.

from jitx import Copper, Pour
from jitx.feature import OverlappableCopper

self.GND += Pour(current.design.board.shape, layer=0)     # board-wide top pour
self.SIG += Copper(rectangle(10, 0.5).at(0, 5), layer=0)  # copper shape on a net

OverlappableCopper is netless. Its electrical connection comes from the pads it overlaps, not from the copper itself. A net-tie is the minimal case: the bridging shape is OverlappableCopper drawn across pads on the two nets it ties. The antenna pattern is the same idea at full size: give the structure a small Component with anchor pads that are on the nets (so the router has something to land on), then draw the radiating shape as OverlappableCopper overlapping those pads:

self.ant = AntennaIFA()                 # component with feed + short anchor pads
self.place(self.ant, (0, 0))
self.ANT_FEED += self.ant.feed          # pads carry the nets
self.GND      += self.ant.short
# radiator shape is netless copper overlapping the pads — no DRC overlap error:
self.copper_radiator = OverlappableCopper(radiator_shape, layer=0)

Note OverlappableCopper is not in the set of tag-able objects (see Tags below). The full antenna example is in references/layout-examples.md.

Pad features (soldermask / paste / thermal pad)

Custom Pad subclasses (KiCad-converted footprints, mechanical pads) get no default soldermask or paste — the pad is unsolderable until you add them. Two mechanisms, kept distinct:

(a) Feature objects added to a Pad. Surface features take (shape, side=Side.Top):

from jitx.feature import Soldermask, Paste
# JLCPCB convention: mask = copper expanded by solder_mask_registration (~0.05 mm);
# paste = copper exactly. See pad_features.py helpers in references for Circle-exact expansion.
mask  = Soldermask(expanded_copper_shape, side=Side.Top)
paste = Paste(copper_shape)

(b) SMDPadConfig driving a landpattern generator. Each of copper / soldermask / paste takes a Shape (or a float expansion, None to skip, or a ShapeAdjustment like paste subdivision). Omit a field (default ...) for standard behavior. Pass the config to landpattern.thermal_pad(shape, config=):

from jitxlib.landpatterns.pads import SMDPadConfig
config = SMDPadConfig(soldermask=opening_shape, paste=opening_shape)   # both are Shapes
landpattern.thermal_pad(shape=rectangle(3.45, 3.45), config=config)

A soldermask-defined thermal pad (shapely CSG webs + via dams, a cheap-fab alternative to filled via-in-pad) is a complete worked example in references/layout-examples.md. Authoring the package/landpattern itself from a datasheet belongs to jitx-component-modeler; this skill is the feature mechanics.

Explicit placement & via attachment

Scope rule — PortAttachment is for signal topologies only: binding a signal port to a control point, or to a signal via in an escape/deskew path. For ground/power stitching vias, thermal vias, and anything else that just joins a net, add the placed via (or copper) to the net — Net accepts Copper | Via members directly. PortAttachment use is deliberately being limited and is expected to be deprecated; default to the net form whenever the connection is plain net membership.

# Ground / thermal vias: net membership — NOT PortAttachment.
# Source the via class from the substrate / JLCPCB library — do NOT redefine vias here:
via_cls = substrate.signal_via[layer]          # or: from jitxlib.jlcpcb.vias import JLCPCBVias
self.thermal_vias = [via_cls().at(x, y) for (x, y) in via_positions]   # list, not a string-keyed dict
for via in self.thermal_vias:
    self.GND += via

For the signal-topology cases, PortAttachment(port_or_ports, attachment) connects a port (or a sequence of ports) to a placed Copper | Via | ControlPoint at a fixed location:

from jitx.net import PortAttachment
# Signal escape via at a fixed location, bound to its signal port:
self.attachments = [PortAttachment(self.serdes.TX.p, via_cls().at(x, y))]

Vias are defined in the substrate, not here (see jitx-substrate-modeler). This skill places instances of them. Define a custom module-scope Via subclass only with a fab-verified reason — e.g. the tented-unfilled thermal via in the thermal-pad example, where JLCPCB charges nothing for tented vias inside a pad.

Placement:

self.led = LED().at(10.0, 5.0, rotate=90)          # x, y, rotate (deg), on=Side
self.led_b = LED().at(10.0, 5.0, on=Side.Bottom)
self.place(self.amp, (0, 0))                       # Circuit.place — anchor in local frame
self.subckt = MySub().at(floating=True)            # layout engine decides position

When a placed component and the geometry attached to it share the same local frame (place the anchor at (0, 0), give attachments offsets in that frame), they move together under interactive placement. Store attachments/vias/lanes as list or dataclass attributes — never getattr(self, f"via_{i}") (see Anti-string-hacking).

Keepouts that shape pours

KeepOut(shape, layers=LayerSet(...), pour=, via=, route=) — at least one of pour / via / route must be True or it is a no-op (the constructor warns):

• pour=True — keep pours out of this area
• via=True — block the auto-router from dropping vias here
• route=True — disallow auto-router traces here

A higher-rank Pour of the same shape fills back over a keepout — the pattern for a deliberately-shaped local ground island (e.g. around an antenna) that the board-wide pour is otherwise cleared from.

Local vs global pours. Board-wide return-path pours belong in the top-level design (the convention in jitx-circuit-builder). The exception: a local pour/keepout that must track a placed sub-circuit — like an antenna's ground island — lives inside that circuit so it follows the circuit wherever it is placed. To ring an arbitrary shape with fence vias (antipads, RF cavities, BGA breakouts), see jitx-substrate-modeler "Fenced Pour Outlines".

Layout-intent tags (object selection)

Use tags to mark which physical objects get special layout treatment; the rule that defines the treatment (width, clearance, thermal relief, fence vias, routing structure) is declared in the substrate or top-level design via design_constraint(...) — see jitx-substrate-modeler.

Apply with MyLayoutTag().assign(obj) or Tags(tag_a, tag_b).assign(obj1, obj2) — always a Tag subclass you define, never the bare Tag base — inside a design/circuit context. Supported object types: Net, TopologyNet, Copper, Pour, Route, Component, Circuit, Landpattern, Pad, Via, ControlPoint — note OverlappableCopper is not taggable.

Tagging a container tags the copper objects inside it — tag a Landpattern and every pad in it inherits the tag; same for a Component or Circuit. Tag self in a class __init__ to tag all instances of that class. Assignment outside a design-relevant context emits a RuntimeWarning and has no effect, and assigning a BuiltinTag raises TypeError (builtins are rule conditions only — see jitx-substrate-modeler).

Common layout-intent tag roles (define the Tag subclasses in your design):

• Fanout / escape (PinFanoutTag, PowerPinFanoutTag, BootstrapFanoutTag) — local neckdown/escape for fine-pitch package pins, applied to short route segments or individual pads, overriding the board-wide width/clearance for the escape.
• FanoutPourKeepoutTag — ask pours to stay back from dense local fanout copper.
• DirectConnectTag — solid pour connection (no thermal-relief spokes) for high-current/high-dissipation pads; tag the component to tag all its pads.

The "route two pads, then tag the route" workflow — create a code-based route and mark it for the escape rule:

# Route a pin to its escape destination (both ports on the SAME net), then tag the segment:
r = Route(self.u1.SCL, self.header.SCL, layer=0)
self.routes = [r]                          # store on self so the structural walk sees it
Tags(PinFanoutTag()).assign(r)             # Route is a supported tag target

Route and the control-point types are detailed in references/control-points.md.

Control points & code-based routes (ADVANCED)

Stable as of JITX 4.2.0. The module is jitx.controlpoint (the three classes are also re-exported from top-level jitx). The classes were renamed in 4.2.0 — pre-release alphas called them SingleControl / InsertionControl / PairControl; those names no longer import.

• Route(source, destination, layer, sketch=None) — a code-based route between two Port/Pad/Via endpoints (not directional); sketch is an optional list of points hinting the routing engine. No per-route width/clearance overrides — tag the route and write a design_constraint(...) rule instead.
• RoutePoint(layer=..., shape=None, bundle=Port) — the single-ended control point; its .port is the routable endpoint.
• PairInsertion(layer=..., bundle=DiffPair) — differential-pair insertion point (uncoupled legs on one side via .uncoupled.{n,p}, coupled pair on the other via .coupled); PairPoint(layer=..., bundle=DiffPair) — joins two coupled segments via .pair. Both are placed with .at(point, rotate=) and wired to ports via PortAttachment([n, p], control) — port order sets chirality for PairInsertion.

Full pattern, chirality rules + the real BGA escape/deskew example: references/control-points.md.

Anti-string-hacking

Geometry-heavy layout code tempts you into building a parallel string-keyed model (vias[f"r{r}c{c}"] = ...) and walking it to emit JITX calls. Don't. Construct the JITX objects directly; batch parameters with a @dataclass(frozen=True) or a plain list; key dicts by Port/structural objects, never by an assembled string. If the only key you have is a runtime-built string, the structural object you need is missing. See the base jitx skill's references/architectural-patterns.md, and run jitx-skills:jitx-code-review as a self-critique pass on layout code.

Verification

pyright path/to/layout.py        # verify imports/signatures against the installed package
ruff format path/to/layout.py

Then build-test with a SampleDesign harness (see jitx-circuit-builder "Verification Process"); sequence builds — don't parallelize against the same design. Validate shapely outputs (non-empty Polygon/MultiPolygon) before they reach a fab feature.

API Reference

Complete class definitions and parameters: JITX Documentation. Worked examples: references/layout-examples.md (thermal-pad CSG, antenna) and references/control-points.md (Route / control points).