agent-credit

name	agent-credit
description	Borrow from Aave via credit delegation. Agent self-funds by borrowing against delegator collateral. Supports borrow, repay, health checks. Works on Aave V2/V3.

Aave Credit Delegation

Borrow funds from Aave using delegated credit. Your main wallet supplies collateral and delegates borrowing power to the agent's wallet. The agent can then autonomously borrow tokens when needed — the debt accrues against the delegator's position.

Protocol: Works on Aave V3 and Aave V2 — the function signatures for credit delegation (borrow, repay, approveDelegation, borrowAllowance) are identical across both versions. Just swap in the V2 LendingPool and ProtocolDataProvider addresses. The only cosmetic difference: V3 returns collateral/debt in USD (8 decimals), V2 in ETH (18 decimals). The health factor safety check works correctly on both.

Compatible With

• OpenClaw — Install as a skill, the agent borrows autonomously
• Claude Code — Run scripts directly from a Claude Code session
• Any agent framework — Plain bash + Foundry's cast, works anywhere with a shell

Combines with Bankr skills for borrow-then-swap flows: borrow USDC via delegation, then use Bankr to swap, bridge, or deploy it.

How Credit Delegation Works

Credit delegation in Aave V3 separates two things: borrowing power and delegation approval.

Borrowing power is holistic. It comes from your entire collateral position across all assets. If you deposit $10k worth of ETH at 80% LTV, you have $8k of borrowing power — period. That borrowing power isn't locked to any specific asset.

Delegation approval is isolated per debt token. You control which assets the agent can borrow and how much of each by calling approveDelegation() on individual VariableDebtTokens. Each asset has its own debt token contract, and each approval is independent.

This means you can, for example:

• Deposit ETH as collateral (gives you broad borrowing power)
• Approve the agent to borrow up to 500 USDC (via the USDC VariableDebtToken)
• Approve the agent to borrow up to 0.1 WETH (via the WETH VariableDebtToken)
• Leave cbETH unapproved (agent cannot borrow it at all)

The agent can only borrow assets you've explicitly approved, up to the amounts you've set — but the capacity to borrow comes from your total collateral, not from any single deposit.

Your Collateral (holistic)              Delegation Approvals (isolated)
┌─────────────────────────┐             ┌──────────────────────────────┐
│  $5k ETH                │             │  USDC DebtToken → agent: 500 │
│  $3k USDC               │  ───LTV───▶ │  WETH DebtToken → agent: 0.1 │
│  $2k cbETH              │   = $8k     │  cbETH DebtToken → agent: 0  │
│  Total: $10k @ 80% LTV  │  capacity   └──────────────────────────────┘
└─────────────────────────┘

Flow

Delegator (your wallet)                 Agent Wallet (delegatee)
    │                                        │
    │  1. supply collateral to Aave          │
    │  2. approveDelegation(agent, amount)   │
    │        on the VariableDebtToken        │
    │                                        │
    │            ┌─── 3. borrow(asset,       │
    │            │       amount, onBehalfOf   │
    │            │       = delegator)         │
    │            │                            │
    │     [debt on YOUR position]    [tokens in agent wallet]
    │            │                            │
    │            └─── 4. repay(asset,         │
    │                    amount, onBehalfOf   │
    │                    = delegator)         │

Quick Start

Prerequisites

1. Foundry must be installed (cast CLI):

   curl -L https://foundry.paradigm.xyz | bash && foundryup
   

2. Delegator setup (done ONCE by the user, NOT the agent):

   • Supply collateral to Aave V3 (via app.aave.com or contract)
   • Call approveDelegation(agentAddress, maxAmount) on the VariableDebtToken of the asset you want the agent to borrow
   • The VariableDebtToken address can be found via: cast call $DATA_PROVIDER "getReserveTokensAddresses(address)(address,address,address)" $ASSET --rpc-url $RPC

3. Configure the skill:

   mkdir -p ~/.openclaw/skills/aave-delegation
   cat > ~/.openclaw/skills/aave-delegation/config.json << 'EOF'
   {
     "chain": "base",
     "rpcUrl": "https://mainnet.base.org",
     "agentPrivateKey": "0xYOUR_AGENT_PRIVATE_KEY",
     "delegatorAddress": "0xYOUR_MAIN_WALLET",
     "poolAddress": "0xA238Dd80C259a72e81d7e4664a9801593F98d1c5",
     "dataProviderAddress": "0x2d8A3C5677189723C4cB8873CfC9C8976FDF38Ac",
     "assets": {
       "USDC": {
         "address": "0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913",
         "decimals": 6
       },
       "WETH": {
         "address": "0x4200000000000000000000000000000000000006",
         "decimals": 18
       }
     },
     "safety": {
       "minHealthFactor": "1.5",
       "maxBorrowPerTx": "1000",
       "maxBorrowPerTxUnit": "USDC"
     }
   }
   EOF
   

Core Usage

Check Status (allowance, health, debt)

# Full status report
scripts/aave-status.sh

# Check specific asset delegation
scripts/aave-status.sh USDC

# Just health factor
scripts/aave-status.sh --health-only

Borrow via Delegation

# Borrow 100 USDC
scripts/aave-borrow.sh USDC 100

# Borrow 0.5 WETH
scripts/aave-borrow.sh WETH 0.5

The borrow script automatically:

1. Checks delegation allowance (sufficient?)
2. Checks delegator health factor (safe to borrow?)
3. Executes the borrow
4. Reports the result

Repay Debt

# Repay 100 USDC
scripts/aave-repay.sh USDC 100

# Repay all USDC debt
scripts/aave-repay.sh USDC max

The repay script automatically:

1. Approves the Pool to spend the token (if needed)
2. Executes the repay
3. Reports remaining debt

Safety System

Every borrow operation runs these checks BEFORE executing:

1. Delegation allowance — Is the remaining allowance >= requested amount?
2. Health factor — Is the delegator's health factor > minHealthFactor (default 1.5) AFTER this borrow?
3. Per-tx cap — Is the amount <= maxBorrowPerTx?
4. Confirmation — Logs the full operation details before sending

If ANY check fails, the borrow is aborted with a clear error message.

⚠️ The agent must NEVER bypass safety checks. If the user asks the agent to borrow and the health factor is too low, the agent should refuse and explain why.

Capabilities

Read Operations (no gas needed)

• Check delegation allowance — How much can the agent still borrow?
• Check health factor — Is the delegator's position safe?
• Check outstanding debt — How much does the delegator owe on each asset?
• Check available liquidity — Is there enough in the Aave pool to borrow?
• Resolve debt token addresses — Look up VariableDebtToken for any asset

Write Operations (needs gas in agent wallet)

• Borrow — Draw funds from Aave against delegated credit
• Repay — Return borrowed funds to reduce delegator's debt
• Approve — Approve Pool to spend tokens for repayment

Supported Chains

Chain	Pool Address	Gas Cost
Base	0xA238Dd80C259a72e81d7e4664a9801593F98d1c5	Very Low
Ethereum	0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2	High
Polygon	0x794a61358D6845594F94dc1DB02A252b5b4814aD	Very Low
Arbitrum	0x794a61358D6845594F94dc1DB02A252b5b4814aD	Low

See deployments.md for full address list including debt tokens.

Common Patterns

Agent Self-Funding for Gas

# Check if we have enough gas
BALANCE=$(cast balance $AGENT_ADDRESS --rpc-url $RPC)
if [ "$BALANCE" -lt "1000000000000000" ]; then  # < 0.001 ETH
  # Borrow a small amount of WETH for gas
  aave-borrow.sh WETH 0.005
fi

Borrow + Swap via Bankr

# Borrow USDC from delegated credit
aave-borrow.sh USDC 100
# Swap to ETH using Bankr
bankr.sh "Swap 100 USDC for ETH on Base"

Periodic DCA

# Agent borrows USDC weekly and swaps to ETH
aave-borrow.sh USDC 100
bankr.sh "Swap 100 USDC for ETH on Base"

Safety-First Portfolio Rebalance

# Always check health first
aave-status.sh
# Only borrow if healthy
aave-borrow.sh USDC 500

Configuration Reference

config.json Fields

Field	Required	Description
chain	Yes	Chain name (base, ethereum, polygon, arbitrum)
rpcUrl	Yes	JSON-RPC endpoint URL
agentPrivateKey	Yes	Agent wallet private key (0x-prefixed)
delegatorAddress	Yes	User's main wallet that delegated credit
poolAddress	Yes	Aave V3 Pool contract address
dataProviderAddress	Yes	Aave V3 PoolDataProvider address
assets	Yes	Map of symbol → {address, decimals}
safety.minHealthFactor	No	Min HF after borrow (default: 1.5)
safety.maxBorrowPerTx	No	Max borrow per transaction (default: 1000)
safety.maxBorrowPerTxUnit	No	Unit for maxBorrowPerTx (default: USDC)

Environment Variables (override config)

Variable	Overrides
AAVE_RPC_URL	rpcUrl
AAVE_AGENT_PRIVATE_KEY	agentPrivateKey
AAVE_DELEGATOR_ADDRESS	delegatorAddress
AAVE_POOL_ADDRESS	poolAddress
AAVE_MIN_HEALTH_FACTOR	safety.minHealthFactor

Error Handling

Error	Cause	Fix
INSUFFICIENT_ALLOWANCE	Delegation amount exceeded	Delegator must call approveDelegation() again
HEALTH_FACTOR_TOO_LOW	Borrow would risk liquidation	Reduce amount or add collateral
AMOUNT_EXCEEDS_CAP	Per-tx safety cap hit	Reduce amount or update config
INSUFFICIENT_LIQUIDITY	Not enough in Aave pool	Try smaller amount or different asset
INSUFFICIENT_GAS	Agent wallet has no native token	Send gas to agent wallet
EMODE_MISMATCH	Asset incompatible with delegator's eMode	Borrow an asset in the same eMode category

Security

See safety.md for the full threat model and emergency procedures.

Critical rules:

1. The delegator's private key must NEVER be in this repo, config, or scripts — this is the agent's workspace. The delegator manages their side via the Aave UI or a block explorer.
2. Never commit config.json to version control — it contains the agent's private key
3. Never set minHealthFactor below 1.2 — liquidation happens at 1.0
4. Always cap delegation amounts — never approve type(uint256).max
5. Monitor delegator health — set up alerts if HF drops below 2.0
6. Agent must refuse to borrow if safety checks fail, even if instructed to

Resources

• Aave V3 Docs: https://docs.aave.com/developers
• Credit Delegation Guide: https://docs.aave.com/developers/guides/credit-delegation
• Aave Address Book: https://github.com/bgd-labs/aave-address-book
• Foundry Book: https://book.getfoundry.sh/
• DebtToken Reference: https://docs.aave.com/developers/tokens/debttoken