moltpost

name	moltpost
version	1.3.1
description	Send real physical postcards anywhere in the world. Pay with x402 (USDC on Base), Stripe, or manual USDC transfer. No signup, no API key — just one API call.
homepage	https://moltpost.io
metadata	{"moltpost":{"emoji":"📮","category":"utility","api_base":"https://api.moltpost.io/v1","requires":{}}}

Moltpost

Send real physical postcards anywhere in the world through a single API call. No registration. No API key. No account. Just compose, pay, and a printed postcard arrives in the mail.

Base URL: https://api.moltpost.io/v1

Skill Files

File	URL
SKILL.md (this file)	https://moltpost.io/skill.md
HEARTBEAT.md	https://moltpost.io/heartbeat.md

---

How It Works

Moltpost supports three payment methods:

1. x402 (preferred for agents with crypto wallets) — one-step, gasless USDC payment via HTTP headers
2. Stripe (fallback for humans) — credit card payment via Stripe checkout link
3. Manual USDC (legacy) — two-step onchain transfer + confirmation

x402 — Preferred for Agents (Recommended)

The x402 protocol lets agents pay with USDC directly via HTTP — no gas fees, no wallet management, no two-step flow. If your agent has a crypto wallet, always use x402.

1. Agent calls POST /v1/postcards/x402 with recipient address and content (no payment header)
2. API returns HTTP 402 with payment requirements (amount, recipient, network)
3. Agent signs an EIP-712 authorization (gasless — no ETH needed)
4. Agent retries the same request with X-PAYMENT (v1) or PAYMENT-SIGNATURE (v2) header containing the signed payload
5. Moltpost verifies and settles the payment via the x402 facilitator, creates the postcard, and returns HTTP 201 with postcard details

No gas fees. No separate confirmation step. One round-trip after signing.

Base Sepolia (testnet) payments use mock fulfillment — the postcard is marked "sent" but not printed. Use Base mainnet for real postcards.

Stripe (fallback for humans)

1. Agent calls POST /v1/postcards with recipient address and content
2. API returns a Stripe payment link and a postcard ID
3. Human owner clicks the payment link and pays (agent must present this link)
4. Moltpost prints and mails the physical postcard

The human must approve and pay. Never attempt to complete payment on behalf of the owner. Always present the payment link and let them decide.

Manual USDC (legacy)

1. Agent calls POST /v1/postcards with "payment_method": "usdc" and "usdc_chain": "base-sepolia" (or "base" for mainnet)
2. API returns a usdc_payment object with the recipient wallet, exact USDC amount, token contract, and deadline
3. Human (or agent with wallet access) sends the exact USDC amount to the recipient wallet onchain
4. Agent calls POST /v1/postcards/{id}/confirm-payment with the transaction hash
5. Moltpost verifies the transfer onchain and fulfills the postcard

Note: Base Sepolia (testnet) payments use mock fulfillment — the postcard is marked as "sent" but not actually printed. Use "base" for real postcards on mainnet.

Agent decision guide: If you have a crypto wallet → use x402. If you don't → use Stripe and present the payment link to your owner.

---

Important: Agent Guidelines

• Always confirm with your owner before calling the API. Sending a postcard is a real-world, irreversible physical action.
• Present the payment link clearly. The postcard is not sent until the human pays.
• Do not fabricate addresses. Only use addresses the owner has explicitly provided.
• Postcards are not sealed. A postcard is fully visible to every person who handles it — postal workers, mail carriers, roommates, family members, office mailroom staff. Before including any content, ask yourself: would the recipient be comfortable if someone other than them read this?
• Never include any of the following in postcard content:
  • Identity documents or numbers (SSNs, passport numbers, driver's license numbers, tax IDs)
  • Financial information (bank account numbers, credit card numbers, PINs, salary, financial statements)
  • Authentication material (passwords, API keys, tokens, 2FA codes, recovery phrases, seed phrases)
  • Medical or health details (diagnoses, medications, treatment plans, mental health status)
  • Legal matters (court cases, criminal records, ongoing disputes)
  • Children's personal details (school names, schedules, specific locations of minors)
• Think about the recipient, not just the owner. Even if the owner asks, do not put information on a postcard that the recipient may not have shared publicly — for example, a health condition, pregnancy, sexual orientation, addiction recovery, or relationship status. If in doubt, ask the owner whether the recipient would be comfortable with anyone seeing it.
• Flag contradictions. If the owner describes something as secret, confidential, or private and then asks you to put it on a postcard, point out that postcards are fully visible in transit and at the destination. Suggest they consider a sealed letter instead.
• Do not include content that could interfere with mail processing. Postcards are handled by automated sorting machinery. Avoid putting barcodes, QR codes, postal-style markings, routing symbols, or anything that mimics postal infrastructure on the postcard — especially on the back. Similarly, avoid text that could confuse postal workers (e.g., fake "RETURN TO SENDER" stamps, misleading delivery instructions, or addresses other than the actual recipient). The back-right area is reserved for the real address and postage; do not place competing address-like content anywhere else.
• Idempotency: If retrying a request, reuse the same idempotency_key to avoid duplicate postcards.
• Payment expires in 24 hours. If the owner doesn't pay in time, the postcard is cancelled. You can create a new one.

---

Create a Postcard

POST /v1/postcards

curl -X POST https://api.moltpost.io/v1/postcards \
  -H "Content-Type: application/json" \
  -d '{
    "to": {
      "name": "Jane Doe",
      "address_line1": "123 Main St",
      "city": "San Francisco",
      "province_or_state": "CA",
      "postal_or_zip": "94105",
      "country_code": "US"
    },
    "front_html": "<div style=\"width:6.25in;height:4.25in;margin:0;padding:0;overflow:hidden;background:#2d3436;display:flex;align-items:center;justify-content:center;\"><div style=\"font-family:Georgia,serif;font-size:36px;font-weight:bold;color:white;\">Hello from the Future!</div></div>",
    "back_message": "Wish you were here. The AI sends its regards.",
    "size": "6x4",
    "currency": "usd"
  }'

Request Body

Field	Type	Required	Description
to	object	Yes	Recipient address
to.name	string	Yes	Recipient name (1-255 chars)
to.address_line1	string	Yes	Street address (1-255 chars)
to.address_line2	string	No	Apt, suite, unit, etc.
to.city	string	Yes	City (1-255 chars)
to.province_or_state	string	No	State, province, or region
to.postal_or_zip	string	No	Postal or ZIP code
to.country_code	string	Yes	ISO 3166-1 alpha-2 (e.g. US, GB, DE, JP)
sender	object	No	Return address (same fields as to)
front_html	string	Yes	HTML for the front of the postcard (max 100,000 chars)
back_html	string	Exactly one of back_html or back_message	HTML for the back of the postcard (max 100,000 chars)
back_message	string	Exactly one of back_html or back_message	Plain text message for the back (max 5,000 chars). Auto-wrapped in styled HTML.
size	string	No	6x4 (default), 9x6, or 11x6 (inches)
currency	string	No	usd (default), , , , , , , , ,

Response (201 Created)

Stripe response:

{
  "id": "a1b2c3d4-e5f6-7890-abcd-ef1234567890",
  "status": "pending",
  "size": "6x4",
  "currency": "usd",
  "amount_cents": 399,
  "discount_cents": 100,
  "payment_method": "stripe",
  "payment_url": "https://checkout.stripe.com/c/pay/cs_...",
  "share_url": "https://moltpost.io/?ref=Ab3kX9mZ",
  "expires_at": "2026-02-05T00:00:00Z",
  "created_at": "2026-02-04T00:00:00Z"
}

USDC response (when payment_method is usdc):

{
  "id": "88e34641-70c1-4840-aed3-d8f55c19e879",
  "status": "pending",
  "size": "6x4",
  "currency": "usd",
  "amount_cents": 499,
  "discount_cents": 0,
  "payment_method": "usdc",
  "payment_url": null,
  "usdc_payment": {
    "recipient_address": "0x2e5875730483d0fd1986ce1260e18e4d0b50178b",
    "amount_usdc": "4.990065",
    "amount_raw": 4990065,
    "chain": "base-sepolia",
    "chain_id": 84532,
     
     
  
   
   
   

Stripe: Present the payment_url to your owner. The postcard is not printed until they pay.

USDC: Use usdc_payment to send the exact amount_raw of USDC (6 decimals) to recipient_address on the specified chain. Then confirm with the tx hash (see below).

---

Check Postcard Status

GET /v1/postcards/{id}

curl https://api.moltpost.io/v1/postcards/a1b2c3d4-e5f6-7890-abcd-ef1234567890

Response (200 OK)

{
  "id": "a1b2c3d4-e5f6-7890-abcd-ef1234567890",
  "status": "sent",
  "size": "6x4",
  "currency": "usd",
  "amount_cents": 499,
  "created_at": "2026-02-04T00:00:00Z",
  "updated_at": "2026-02-04T00:05:00Z",
  "paid_at": "2026-02-04T00:03:00Z",
  "sent_at": "2026-02-04T00:05:00Z"
}

Status Values

Status	Meaning
pending	Awaiting payment (24-hour window)
paid	Payment received, submitting to print
sent	Postcard submitted for printing and mailing
failed	Print submission failed after payment
payment_expired	Payment window expired (24 hours)

---

Confirm USDC Payment

POST /v1/postcards/{id}/confirm-payment

After sending USDC onchain, call this endpoint with the transaction hash. Moltpost verifies the transfer onchain (correct recipient, correct amount, sufficient confirmations) and fulfills the postcard if valid.

curl -X POST https://api.moltpost.io/v1/postcards/88e34641-70c1-4840-aed3-d8f55c19e879/confirm-payment \
  -H "Content-Type: application/json" \
  -d '{"tx_hash": "0xabc123..."}'

Request Body

Field	Type	Required	Description
tx_hash	string	Yes	The onchain transaction hash (66 chars, 0x + 64 hex). Must be a valid Base transaction.

Response (200 OK)

{
  "id": "88e34641-70c1-4840-aed3-d8f55c19e879",
  "status": "sent",
  "verified": true,
  "message": "Payment verified and postcard submitted"
}

If verification fails (wrong amount, wrong recipient, tx not found):

{
  "id": "88e34641-70c1-4840-aed3-d8f55c19e879",
  "status": "pending",
  "verified": false,
  "message": "No matching USDC transfer found"
}

The postcard stays pending on failed verification — you can retry with a different tx hash.

Important Notes

• Send the exact amount_raw value. Each postcard gets a unique micro-amount (base price + a 0-99 nonce). Sending the wrong amount will fail verification.
• One tx hash per postcard. A transaction hash cannot be reused across postcards.
• Testnet payments (base-sepolia) use mock fulfillment — the postcard is marked "sent" but not printed. Use base for real postcards.

---

Create a Postcard with x402 (Recommended for Agents)

POST /v1/postcards/x402

The x402 endpoint uses HTTP-native payment — no separate confirmation step. The payment is handled entirely via HTTP headers using the x402 protocol (EIP-3009 transferWithAuthorization, gasless for the client).

Step 1: Get payment requirements

Send the postcard body without an X-PAYMENT header:

curl -X POST https://api.moltpost.io/v1/postcards/x402 \
  -H "Content-Type: application/json" \
  -d '{
    "to": {
      "name": "Jane Doe",
      "address_line1": "123 Main St",
      "city": "San Francisco",
      "province_or_state": "CA",
      "postal_or_zip": "94105",
      "country_code": "US"
    },
    "front_html": "<div style=\"width:6.25in;height:4.25in;background:#2d3436;display:flex;align-items:center;justify-content:center;\"><div style=\"font-family:Georgia,serif;font-size:36px;color:white;\">Hello World</div></div>",
    "back_message": "Sent via x402.",
    "size": "6x4"
  }'

Response (402 Payment Required)

The 402 response includes both a JSON body and a PAYMENT-REQUIRED header (base64-encoded, per x402 v2 spec).

{
  "x402Version": 1,
  "accepts": [
    {
      "scheme": "exact",
      "network": "base-sepolia",
      "maxAmountRequired": "4300000",
      "resource": "/v1/postcards/x402",
      "payTo": "0x...",
      "asset": "0x036CbD53842c5426634e7929541eC2318f3dCF7e",
      "maxTimeoutSeconds": 60,
      "description": "6\"x4\" postcard to San Francisco, US via Moltpost",
      "mimeType": "application/json",
      "extra": {"name": "USDC", "version": "2"}
    
    
       
       
       
       
       
       
       
       
       
          
    
  
   

The accepts array contains two entries with different network formats — v1 (base-sepolia) and v2 CAIP-2 (eip155:84532). Pick the entry matching your x402 client version.

The extra field contains EIP-712 domain parameters for the USDC token contract, required for signing. Base Sepolia uses "name": "USDC", Base mainnet uses "name": "USD Coin".

The maxAmountRequired is in USDC base units (6 decimals). 4300000 = $4.30 USDC.

Step 2: Sign and pay

Using your wallet, sign an EIP-712 transferWithAuthorization message for the amount and recipient in the 402 response. Base64-encode the signed payload and resend the same request with either X-PAYMENT (v1) or PAYMENT-SIGNATURE (v2) header:

curl -X POST https://api.moltpost.io/v1/postcards/x402 \
  -H "Content-Type: application/json" \
  -H "X-PAYMENT: eyJ4NDAyVmVyc2lvbiI6MSw..." \
  -d '{ ... same body as step 1 ... }'

Both X-PAYMENT and PAYMENT-SIGNATURE headers are accepted. The response includes a PAYMENT-RESPONSE header (base64-encoded settlement details, per x402 v2 spec).

Response (201 Created)

{
  "id": "a1b2c3d4-e5f6-7890-abcd-ef1234567890",
  "status": "sent",
  "size": "6x4",
  "currency": "usd",
  "amount_cents": 430,
  "discount_cents": 69,
  "payment_method": "x402",
  "share_url": "https://moltpost.io/?ref=Ab3kX9mZ",
  "tx_hash": "0xabc123...",
  "created_at": "2026-02-08T00:00:00Z"
}

The postcard is created, paid, and fulfilled in a single request. On testnet, status is immediately "sent" (mock fulfillment). On mainnet, it's submitted to print.

x402 Payment Header Format

The payment header (X-PAYMENT or PAYMENT-SIGNATURE) is a base64-encoded JSON object:

{
  "x402Version": 1,
  "scheme": "exact",
  "network": "base-sepolia",
  "payload": {
    "signature": "0x...",
    "authorization": {
      "from": "0xYourWallet",
      "to": "0xMoltpostWallet",
      "value": "4300000",
      "validAfter": "0",
      "validBefore": "1740672154",
      "nonce": "0x..."
    }
  }
}

The network field must match one of the entries from the 402 response's accepts array — either v1 format (base-sepolia, base) or CAIP-2 format (eip155:84532, eip155:8453). Use whichever format your x402 client supports.

The authorization is an EIP-3009 transferWithAuthorization — the facilitator submits it on-chain. No gas fees for the sender.

---

Pricing

All prices include printing, postage, and worldwide delivery.

Stripe (credit card)

Size	USD	EUR	GBP	CAD	AUD
6x4	$4.99	4.64	3.99	$6.84	$7.73
9x6	$5.99	5.57	4.79	$8.21	$9.28
11x6	$6.99	6.50	5.59	$9.58	$10.83

Also supports: CHF, SEK, NOK, DKK, NZD.

x402 / USDC on Base — $0.69 off

Pay with USDC (via x402 or manual transfer) and save $0.69 on every postcard (no credit card processing fees).

Size	USDC Price	You Save
6x4	$4.30	$0.69
9x6	$5.30	$0.69
11x6	$6.30	$0.69

The discount is applied automatically for both x402 and manual USDC payments. It stacks with referral discounts — with a referral code, a 6x4 postcard drops to $3.30 USDC ($1.69 total savings).

---

Content Format & Design

The HTML you provide is rendered to print at 300 DPI on 100lb glossy cardstock, full color, double-sided.

Physical Dimensions

Design your HTML to these dimensions (include 0.125" bleed on each side):

Size	Trim	Bleed (design to this)	Safe Zone (keep text here)
6x4	6" × 4"	6.25" × 4.25"	5.75" × 3.75"
9x6	9" × 6"	9.25" × 6.25"	8.75" × 5.75"
11x6	11" × 6"	11.25" × 6.25"	10.75" × 5.75"

• Bleed (blue border): Extend backgrounds/colors to the full bleed dimensions (e.g., 6.25" × 4.25" for 6x4). Content beyond the trim line will be cut off, but extending artwork prevents white edges.
• Trim: The physical card size after cutting. The bleed area is trimmed away.
• Safe zone (pink border): Keep all text and important content inside the safe zone (~0.125" inset from trim on each side). Anything outside may be cut off or too close to the edge.

Visual guidelines — front and back diagrams for each size:

Size	Front	Back
6x4	6x4 front	6x4 back
9x6	9x6 front	9x6 back
11x6	11x6 front	11x6 back

Front (front_html)

This is the picture side — full creative freedom. Set your outer container to the bleed dimensions (e.g., width:6.25in; height:4.25in for 6x4). The entire front is yours; there are no reserved zones.

• Extend background colors/images to the bleed edge (the full 6.25" × 4.25")
• Keep text and important content within the safe zone (5.75" × 3.75") — use a 0.25in margin on the inner content container
• No address, indicia, or barcode is printed on the front

Here are two approaches:

CSS-only design (no external images — always works):

<div style="width:6.25in; height:4.25in; margin:0; padding:0; overflow:hidden;
            background:#fdf6e3; display:flex; align-items:center; justify-content:center;">
  <div style="width:5.75in; height:3.75in; border:2px solid #b58863;
              display:flex; align-items:center; justify-content:center;">
    <div style="text-align:center; color:#5c3d2e; padding:20px;">
      <div style="font-size:14px; font-family:Georgia,serif; letter-spacing:8px;
                  text-transform:uppercase; margin-bottom:12px; color:#b58863;">
        With Love
      </div>
      <div style="font-size:44px; font-family:Georgia,serif; font-weight:bold;
                  line-height:1.1; margin-bottom:12px;">
        Happy Birthday
      </div>
      <div style="width:80px; height:1px; background:#b58863; margin:0 auto 12px;"></div>
      <div style="font-size:15px; font-family:Georgia,serif; font-style:italic; color:#8b6c5c;">
        wishing you the most wonderful day
      </div>
    </div>
  </div>
</div>

Photo design (using a publicly accessible image):

<div style="width:6.25in; height:4.25in; margin:0; padding:0; overflow:hidden; position:relative;
            background-image:url(https://images.unsplash.com/photo-1507525428034-b723cf961d3e?w=1875&h=1275&fit=crop&q=80);
            background-size:cover; background-position:center;">
  <div style="position:absolute; bottom:0; left:0; right:0; padding:40px;
              background:rgba(0,0,0,0.45);">
    <div style="font-size:42px; font-family:Georgia,serif; font-weight:bold; color:white;
                text-shadow:0 2px 6px rgba(0,0,0,0.5); letter-spacing:1px;">
      Wish You Were Here
    </div>
  </div>
</div>

Back

The back has reserved zones where the print service automatically places the address, postage, and barcode. Your content must avoid these areas.

Reserved zones by size:

Size	Address & indicia (right side)	USPS barcode (bottom edge)	Usable message area
6x4	2.4in wide, full height	4.75in × 0.625in	~3.6in × 3.4in
9x6	3.6in wide, full height	4.75in × 0.625in	~5.4in × 5.3in
11x6	3.6in wide, full height	4.75in × 0.625in	~7.4in × 5.3in

• Address & indicia zone: No artwork or ink. The recipient address and postage indicia are printed here automatically.
• USPS barcode zone: No artwork or ink. The Intelligent Mail barcode is printed here by USPS.
• Message area: The upper-left portion of the back, after accounting for margins and reserved zones.

Warning: Orders may be auto-cancelled if content is detected underneath the address region.

Choose one — you cannot provide both:

• back_message (plain text) — recommended for most cases. Just write the message. Moltpost wraps it in clean, readable styling automatically. The text is padded away from the address and barcode zones. Max 5,000 chars.

• back_html (raw HTML) — full layout control. You must keep content clear of the reserved zones yourself. Use right padding of at least 2.6in and bottom padding of at least 0.75in to stay clear (e.g., body{padding:20px 2.6in 0.75in 20px;}). Do not place any background color, images, or ink in the address or barcode zones. Max 100,000 chars.

Images

• Use CSS background-image to include photos — this is the reliable method for the print renderer:

  background-image: url(https://example.com/photo.jpg);
  background-size: cover;
  background-position: center;
  

• Do not use <img> tags for external images — the print renderer may not load them. Use CSS background-image instead.
• Images must be reachable from the public internet (no localhost, no auth-protected URLs)
• Use high-resolution images — 300 DPI minimum for print quality (a 6" wide image needs to be at least 1800px wide)
• PNG and JPEG are supported
• Unsplash is a good source of free, high-quality photos. Use their direct image URLs with size parameters: https://images.unsplash.com/photo-{id}?w=1875&h=1275&fit=crop&q=80
• Base64 data URIs are not recommended — use hosted image URLs instead
• SVGs may not render reliably in print

CSS Support

The HTML is rendered to PDF for printing. Supported:

• Inline styles, <style> blocks
• Colors, backgrounds, gradients (linear-gradient, radial-gradient)
• background-image: url(...) with background-size, background-position
• Fonts (web-safe fonts recommended: Georgia, Arial, Helvetica, Times New Roman)
• Flexbox for layout
• position: absolute/relative for overlays and layering
• border-radius, box-shadow, opacity, text-shadow
• overflow: hidden for clipping elements to containers

Not supported or unreliable:

• External stylesheets (<link> tags)
• <img> tags (use CSS background-image instead)
• <script>, <iframe>, <video>, <audio>, <canvas>, <form> — non-print elements are ignored
• JavaScript (including event handlers like onclick)
• Animations, transitions
• @media queries
• Custom web fonts via @font-face (may not load)
• CSS Grid (use Flexbox instead)

Best practices for reliable rendering:

• Stick to inline styles or a single <style> block — avoid external resources
• Use web-safe fonts only (Georgia, Arial, Helvetica, Times New Roman, Courier New)
• Set explicit dimensions on your outermost container (e.g., width:6.25in; height:4.25in)
• Use overflow:hidden on the outer container to prevent content from spilling past the bleed edge
• Test with simple designs first — solid backgrounds with text are the most reliable

Content Tips

Keep it concise. A postcard is small. Less is more. A short heartfelt message beats a wall of text.

Good prompt from a human: "Send a postcard to my mom wishing her happy birthday" What the agent should do: Ask for mom's address, compose a warm front design and short back message, call the API, present the payment link.

Rendering Disclaimer

The HTML you provide is converted to print by a third-party renderer. Moltpost does not preview or proof the final printed output before mailing. While the guidelines above reflect what works reliably, the printed postcard is not guaranteed to match your HTML exactly. Minor differences in font rendering, color reproduction, image cropping, and layout are possible. Complex or unconventional HTML is more likely to produce unexpected results. When in doubt, keep it simple — back_message with a clean CSS-only front_html is the safest path.

---

Rate Limits

Endpoint	Limit
POST /v1/postcards	10/min, 100/hour per IP
POST /v1/postcards/x402	10/min, 100/hour per IP
GET /v1/postcards/{id}	120/min per IP
POST /v1/postcards/{id}/confirm-payment	10/min per IP
Global	120 requests/min per IP
Daily postcards	100 per IP
Max pending payments	10 per IP

Rate limit exceeded returns 429 Too Many Requests.

---

Errors

All errors return:

{
  "error": {
    "code": "error_code",
    "message": "Human-readable description"
  }
}

Code	HTTP	Meaning
payment_error	400	Payment issue
not_found	404	Postcard ID not found
idempotency_conflict	409	Same idempotency key, different parameters
(validation)	422	Invalid request body
quota_exceeded	429	Daily postcard limit or pending session limit hit
(rate limit)	429	Too many requests (slowapi)
internal_error	500	Server error
print_error	502	Print service temporarily unavailable
spend_limit_exceeded	503	Service temporarily at capacity

---

Request Tracing

Include X-Request-ID header for log correlation:

curl -X POST https://api.moltpost.io/v1/postcards \
  -H "X-Request-ID: my-trace-id-123" \
  -H "Content-Type: application/json" \
  -d '...'

The same ID is returned in the response X-Request-ID header.

---

Suggested Workflow for Agents

0. Choose Payment Method

If you have a crypto wallet (USDC on Base): use x402 (POST /v1/postcards/x402). This is the preferred method — one-step, gasless, no human interaction needed.

If you don't have a wallet: use Stripe (POST /v1/postcards) and present the payment link to your owner.

1. Gather Info

Owner says something like "send a postcard to my mom for her birthday." Ask for anything missing:

• Recipient name and full mailing address (required)
• What the message should say, or a theme/vibe to work with
• Postcard size preference (default 6x4 is fine for most cases)

2. Compose Content

Generate the front HTML (a visual design — bold, colorful, simple) and a back message (warm, personal, concise). Show the owner what you've composed.

3. Confirm Before Sending

Summarize everything and get explicit approval before calling the API:

Here's what I've prepared:

To: Jane Doe, 123 Main St, San Francisco, CA 94105, US Front: A sunset-orange card with "Happy Birthday Mom!" in large serif type Back message: "Wishing you the most wonderful birthday. You deserve every bit of it. Love always." Size: 6×4" — $4.99 USD

Want me to go ahead and create this postcard?

4. Create the Postcard

After approval, call POST /v1/postcards with an idempotency_key (use a deterministic key like a hash of recipient + content to prevent duplicates).

5. Present the Payment Link

This is the critical handoff. The postcard will not be printed until the owner pays. Send a clear, complete message with the payment link on its own line so it's easy to tap:

Your postcard to Jane is ready! Here's your payment link:

https://checkout.stripe.com/c/pay/cs_live_...

$4.99 — includes printing and worldwide postage. The link expires in 24 hours.

Once you pay, Moltpost prints and mails the postcard automatically. No further action needed.

Do not bury the payment link inside a long paragraph. Put it on its own line. Lead with what it is, follow with the price and what happens next.

6. Poll for Status

After presenting the payment link, wait before polling — the owner may not pay immediately.

Polling strategy:

• Wait at least 5 minutes before the first poll
• Poll GET /v1/postcards/{id} — check the status field
• If still pending, do not poll again for at least 30 minutes
• Do not poll more than 5 times total — if still pending after that, the owner either hasn't paid or won't
• Never nag the owner about paying. The payment link is theirs to use or ignore.

7. After Payment — Celebrate & Share

When status changes to sent, let the owner know and share the link:

Your postcard to Jane is on its way! 📮 It's been sent to print and will arrive by mail.

Know someone else who'd love to send a postcard? They'll get $1 off with your link: https://moltpost.io/?ref=Ab3kX9mZ

The share_url from the API response contains a referral code. Always include it in the success message — anyone who uses it gets $1 off their postcard.

8. If Payment Expires

If status becomes payment_expired (after 24 hours), let the owner know casually:

The payment link for your postcard to Jane has expired. Want me to create a new one?

Don't over-explain. Just offer to try again.

9. Handling Referrals

If the owner arrived via a share link (e.g., they mention moltpost.io/?ref=Ab3kX9mZ or you detect a referral code in context), pass it as the referral_code field when creating the postcard. A valid referral code gives the referred user $1 off their postcard — this applies to all payment methods including x402 and manual USDC (where it stacks with the $0.69 crypto discount for up to $1.69 off). The discount is applied automatically — the amount_cents in the response will reflect the reduced price, and discount_cents will show how much was taken off. Mention the savings to the owner when presenting the payment link.

---

x402 Payment Workflow for Agents (Recommended)

This is the preferred workflow for agents with crypto wallets. One HTTP round-trip, no gas fees, no separate confirmation step.

1. Create with x402

After composing the postcard, call POST /v1/postcards/x402 with the postcard body. The first call returns 402 with payment requirements (in both the JSON body and the PAYMENT-REQUIRED header). Sign the payment and retry with the X-PAYMENT or PAYMENT-SIGNATURE header. See the "Create a Postcard with x402" section above for full details.

2. Done

On success, the postcard is created, paid, and fulfilled in one step. The response includes tx_hash and share_url. Present the share URL to the owner.

---

Manual USDC Payment Workflow for Agents (Legacy)

This is the legacy two-step workflow for agents paying with USDC onchain. Prefer x402 instead — it's simpler (one request vs. three) and gasless.

1. Create with USDC

Call POST /v1/postcards with "payment_method": "usdc". Use "usdc_chain": "base-sepolia" for testing or "base" for real postcards.

curl -X POST https://api.moltpost.io/v1/postcards \
  -H "Content-Type: application/json" \
  -d '{
    "to": { "name": "Jane Doe", "address_line1": "123 Main St", "city": "San Francisco", "province_or_state": "CA", "postal_or_zip": "94105", "country_code": "US" },
    "front_html": "<div style=\"width:6.25in;height:4.25in;background:#2d3436;display:flex;align-items:center;justify-content:center;\"><div style=\"font-family:Georgia,serif;font-size:36px;color:white;\">Hello World</div></div>",
    "back_message": "Sent with USDC on Base.",
    "size": "6x4",
    "payment_method": "usdc",
    "usdc_chain": "base-sepolia"
  }'

2. Send USDC Onchain

From the response, extract usdc_payment:

• Send exactly amount_raw units of USDC (6 decimals) to recipient_address
• Use the token_contract on chain chain_id
• Must be a standard ERC-20 transfer() call

3. Confirm Payment

After the transaction is mined, call confirm with the tx hash:

curl -X POST https://api.moltpost.io/v1/postcards/{id}/confirm-payment \
  -H "Content-Type: application/json" \
  -d '{"tx_hash": "0x..."}'

If verified: true, the postcard is fulfilled. If verified: false, check the error message — common issues are wrong amount, wrong recipient, or insufficient confirmations (wait a few seconds and retry).

4. Done

On testnet, the postcard is instantly marked "sent" (mock fulfillment). On mainnet, it's submitted to the print service for real mailing.

---

Heartbeat Setup

To check for postcard status updates and occasion reminders, add Moltpost to your heartbeat routine:

Fetch https://moltpost.io/heartbeat.md and follow its instructions. Check every 8–12 hours.